RIDER
HHHHH
GREAT BIT OF KIT FOR GREAT SHARPENING “This sharpening kit combined with a honing guide gives an excellent edge to your planer blades and chisels”.
Sharpening Station Kit
Sharpening Station Take the guesswork out of sharpening. Measuring 250mm (10”) x 315mm (12”) the Rider Sharpening Board is CNC machined from 13mm (1/2”) thick synthetic resin laminate. This is the same material used to produce our kitchen worktop jigs. It is unaffected by oil or water and easy to keep clean. Four rubber feet give stability whilst sharpening and ensure the board will not creep across the bench in use. The stone recess is 228mm (11”) x 89mm (3.1/2”), (This matches the Rider Double Sided Diamond Bench Stone). It is a simple matter to hold shorter stones in place using a homemade wedge or spacer to fill any gap. A stone needs to be just snug enough to prevent movement back and forth as you sharpen.
The strop is 203mm (8”) x 65mm (2.1/2”) quality split grain leather. The strop removes any remaining minute wire edge and puts a final high polish finish on your edge tools. It is a matter of personal preference whether you use it with or without a polishing compound. Designed to work in conjunction with an Rider Honing Guide it is as effective with similar Eclipse type guides. The edges of the board feature recesses which act as set-up guides for bevel angles of 25°, 30° and 45° for plane irons plus 25° and 30° bevel angles for chisels. This forms a very effect sharpening station with guaranteed repeatability for sharpening or honing angles. Supplied with: Board, Strop, Paste and instructions
Sharpening Station Sharpening Station Kit
Shown with optional Honing Guide
A 200 x 65mm double sided premium diamond stone with medium 400 grit (36 micron) on one side and fine 1,000 grit (15 micron) on the other. The nickel plating permanently fixes the diamond particles onto the 8mm thick steel base. A chequered pattern carries away metal particles thereby maintaining the stone’s cutting efficiency. This stone is more than capable of sharpening modern hard steels, ceramic knives as well as traditional tool steels. A protective non-slip rubber surround keeps the stone in place when in use. For best results use lapping fluid.
248-291_Hand Tools_2020.indd 264
£52.65 101171 £83.32 717767
Code
Measuring 250mm x 315mm the Rider Sharpening Board is CNC machined from 13mm thick synthetic resin laminate. It is unaffected by oil or water and easy to keep clean. Four rubber feet give stability whilst sharpening. The stone recess is 228mm x 89mm, matching the Rider Double Sided Diamond Bench Stone. (Use a wedge or spacer when using a shorter stone). The strop is 203mm x 65mm quality split grain leather. The strop removes any remaining minute wire edge and puts a final high polish finish on your edge tools. Designed to work in conjunction with an Rider Honing Guide it is as effective with similar Eclipse type guides. The edges of the board feature recesses which act as set-up guides for bevel angles of 25°, 30° and 45° for plane irons plus 25° and 30° bevel angles for chisels. Supplied with: board, strop, paste and instructions, in addition the kit includes the Rider double sided diamond bench stone.
Shown with optional Honing Guide
Honing Guide
Double-sided does twice the work.
264
Ex.vat
£63.18 £99.98
Shown with optional Honing Guide
Double-Sided Diamond Bench Stone
Double-Sided Diamond Bench Stone
Inc.vat
One stop sharpening station.
Inc.vat
Ex.vat
£43.58
£36.32 951777
Removes guesswork from setting bevel angles. The Rider Honing Guide is very similar in design to the classic Eclipse 36. It is an ideal tool for achieving a consistent bevel angle, every time you sharpen a blade. The bevel angle depends on the blade’s projection in front of the guide. The guide runs on a 12mm wide roller for smooth operation. The guide offers two tool-clamping positions. The upper jaw accommodates blades up to 78mm wide. The lower V-groove secures bevel edge chisels or thin tools from 3 to 48mm wide.
Code Honing Guide
Inc.vat
Ex.vat
£13.68
£11.40 340147
Code
The Knowledge Blog - Learn. Discover. Create @ axminstertools.com
18/08/2020 12:21