UJK ROUTING JIGS Cabinet & Recess Hinge Jig To speed up the fitting of butt and cabinet hinges, this simple device will soon pay for itself in the time saved when cutting the recesses. The UJK Cabinet & Recess Hinge Jig cuts the hinge recess using a combination of a router fitted with an appropriate guide bush and cutter. For instance, using a 26mm guide bush and 20mm cutter, the template will cut recesses for 100mm and 50mm butt hinges (4” butts may require using a 25mm guide bush). Use a 40mm guide bush with a 9mm cutter for 75mm or 25mm hinges. Just take out the waste from the corners with a corner chisel and your hinges will drop in nicely. For concealed cabinet hinges, use a 24mm guide bush with a 12mm cutter for a 35mm recess and a 30mm guide bush with a 9mm cutter for a 26mm recess. Full instructions supplied with jig. Please note: UJK Universal Sub-Base & Fixing Kit (718650) and UJK Stainless Steel Guide Bush (101873) may be required to adapt your router for use.
Cabinet & Recess Hinge Jig 26 mm Forstner Bit 35 mm Forstner Bit
Inc.vat
Ex.vat
£44.98 £13.18 £17.58
£37.48 106382 £10.98 501932 £14.65 501936
Code
Visit axminstertools.com for our full range of Zipbolt connectors
Variable Angle Kitchen Worktop Jig The recipe for the finest kitchen. This professional patented kitchen worktop jig is capable of 45° and 90° left or right hand joints in worktops with widths of 250, 300, 400, 450, 500, 550, 600, 616, 620-IKEA, 650 and 700mm. It enables you to make peninsular joints, corner radii of 40mm and 100mm, 90° square end cuts plus 45° and 22.5° angle cuts. There are also facilities for cutting 35mm cabinet door hinge recesses (18mm carcass), a hole for tap fixings 35mm (3/4” BSP) and three slots for 65mm and 150mm joining bolts. The jig is CNC cut from 12mm thick solid compact phenolic resin which is very stable and doesn’t warp. Permanently engraved into the top are instructions, diagrams and pin-hole locations. It also solves problems regarding out of square Variable Angle Worktop Jig Kitchen Worktop Cutter 1/2” shank joints. With the addition of the optional accessory, the Angle Adjustment Plate (sold separately), the jig will cut 30mm Guide Bush (10mm projection) accurate left and right hand joints between 85° and 95°. 700mm Jig Storage Bag Supplied with full and comprehensive instructions and a Angle Adjustment Plate pack of four aligning pins. Aligning Pins (Pkt 4)
Zipbolt Worktop Connectors Fast, strong and secure worktop connectors.
Inc.vat
Ex.vat
Code
£96.98 £13.88 £10.96 £14.38 £19.18 £4.28
£80.82 £11.57 £9.13 £11.98 £15.98 £3.57
508615 107254 101875 101502 508620 508621
For worktops of 25mm and over, the standard 170mm Zipbolt connector would be our first choice. With a mechanism 20mm deep requiring a 35mm housing bore they are compatible with most worktop jigs. A 5mm hex bit will be required for tensioning these connectors. If the worktop joint is adjacent to a sink or hob then the shorter 85mm connector may be the best option. Worktop Connector 85mm Worktop Connector 170mm Mini Benchtop Connector 100mm
Inc.vat
Ex.vat
£2.18 £2.78 £2.58
£1.82 £2.32 £2.15
Code
Inc.vat
Ex.vat
£82.98 £10.96 £4.28
£69.15 105279 £9.13 101876 £3.57 508621
504438 504439 504434
Worktop Radius Jig A perfect companion to the UJK Worktop Jig. Offering many more options for routing various radii both internal and external in worktops, this jig is equally useful in a cabinet or furniture workshop where there is frequent need to rout a particular radius. CNC machined from 12mm thick solid compact phenolic resin, this professional jig is very accurate, durable and stable. To set up, simply place the locating pins in the appropriate holes and locate them on the edges of the workpiece. It features six radii; 40mm, 60mm, 80mm, 100mm, 150mm and 250mm; both internal and external. It has a slot for straight cuts up to 820mm, and 26mm and 35mm cabinet hinge recess cutouts. The corners of the jig offer 50mm, 100mm and 150mm radii and a 45mm option. Supplied with full and comprehensive instructions and a pack of four aligning pins. You’ll require a couple of clamps to hold the jig in place and a 30mm guide bush to fit your router.
Worktop Radius Jig 30mm Guide Bush Aligning Pins (Pkt 4)
Join our email club - the best way to get deals, news and much more from Axminster
171-205_Routing & Moulding_2020.indd 199
Code
199 19/08/2020 12:33