CHOOSE YOUR UJK PARF GUIDE SYSTEM PARF SYSTEM
PARF SYSTEM MK II
3mm holes along the length at 96mm centres
6mm holes along the length at 96mm centres
Supplied with
2 x 1m Parf Sticks (rules)
3mm Drill Guide
Used to guide the 3mm drill bit
1x
2x
3mm Drill Bit
3mm Drill Bit with Centrotec Holder 3 x 3mm Guide Pins
Used to keep your Parf Sticks in place when marking out
Guide Block
CNC manufactured to work in harmony with all parts of the system.
2 x Low Profile Parf Dogs
Included to replace the guide pins for the second round of drilling. Plus these are very useful once your table is complete
20mm Cutter & Split Stop Collar
Dust Port
Invaluable when drilling into MDF
Ruler Connector Pin
Ideal for marking out smaller tops
£139.96
£199.98
Ex.vat: £116.63
Ex.vat: £166.65
Code: 102278
Code: 104779
UJK Parf Chamfer Tool UJK 20mm Cutter & Split Stop Collar For Parf Guide System
Give your worktable another dimension.
If you ever need to replace your cutter. This cutter bores an exact 20mm hole as required by the Parf Guide Systems. With tungsten carbide tips for a long lasting working life, the distinctive design ensures an exceptionally clean hole. Suitable for all 1/4” hex quick change systems, including the Festool CENTROTEC. Inc.vat 20mm Cutter & Split Stop Collar For Parf Guide System
160 147-166_Workstations_2020.indd 160
£42.78
Ex.vat
Code
£35.65 105403
This specially designed tool cuts a neat, small chamfer around the precise 20mm dog hole made by the 20mm cutter. Allowing full use of the UJK Parf Super Dog when fitted with its stop collar, it removes sharp edges around holes, preventing damage from repeated insertion of dogs, clamps and other accessories. If the edge becomes dull, turn the cutter 90° to a fresh edge; in all probability, it will never need replacing. Only suitable for use with MDF or ply with a melamine facing. Not included with the Parf Guide System. Parf Chamfer Tool
Inc.vat
Ex.vat
Code
£25.98
£21.65 104464
UJK Parf Dust Port This is invaluable when drilling into MDF to produce your multifunction benchtop. This dust port firmly attaches to the Parf Guide Block. It allows direct connection to a vacuum extractor removing dust and debris. The design allows the dust port to fit on either side of the guide block - whichever is most convenient. The outlet is 38mm diameter. Parf Dust Port 21mm - 38mm
Inc.vat
Ex.vat
£26.68 £11.58
£22.23 105100 £9.65 102534
Code
Find the right tool for the job from over 15,000 products at axminstertools.com
17/08/2020 13:07