Manga Studio The [sHD] window appears.
Method 3: Change SHD (EX only) Using the super High Density (sHD) function, we can apply the most appropriate smoothing processing to ensure the reproduction of the original image without the appearance of jagged edges.
5
1. Select a layer From the [Layers] window, select a medium-resolution raster layer. Here, we select a 150-dpi raster layer. 6
5
For [Layer Type] select [Threshold as Reference], [Diffusion], or [Dither].
6
Click [OK].
The [Change Layer Type] window reappears. 7
Click [OK].
4. Completing layer type change The layer type change is now complete. The layer icon will change according to the new type of the layer.
2. Select the command From the [Layers] menu, select the [Change Layer Type] command. 3. Make the layer settings A [Change Layer Type] window will appear.
1
Check that [Raster Layer] is set for [Layer Type].
2
For [Resolution] select a resolution that is higher than that of the original layer. Here, we select 600 dpi.
3
Place a check mark in the [Use sHD] check box.
4
Click the [sHD settings...] button.
Explanation/Operation Using the [sHD] filter, a low-resolution image can be enhanced to produce an image with the equivalent of four times the resolution. If a sketch is scanned at a high resolution of around 600 dpi, then setting 600 dpi in the [sHD] window will not produce any improvement in the image.
160