TriLink Package Parts Program

Saw Chain and Accessories Packaged Parts Program

A top three supplier in the industry, TriLink® offers a complete line of saw chains, guide bars, and chainsaw related accessories to support users of all levels from loggers to professional lawn care to homeowners.

At TriLink® we believe that quality is the key to success. Our low kickback saw chains have been tested, approved, and listed by Underwriter’s Laboratories to meet all standards for low kickback chains per the American National Standard Safety Requirements (ANSI B175.1) for gasoline-powered chain saws. Our manufacturing facilities are audited quarterly by Underwriter’s Laboratories to maintain this listing and your confidence in our products.

YOUR LINK

TO QUALITY

SAW CHAIN

A proper understanding of the basic components and features of our saw chain aids in determining customer needs. Detailing out chain types, chain components, and key terminology this section offers a quick reference guide to understanding saw chains, guide bars, and their components. The following section has a comprehensive list of our packaged parts saw chain offerings.

SAW CHAIN

TYPES / STYLES INDUSTRY TERMS KEY COMPONENTS PACKAGING INNOVATIONS PRODUCT LISTING

FULL CHISEL CUTTERS SEMI CHISEL Leading Edge

FULL CHISEL Leading Edge

CHIPPER Leading Edge

Full chisel cutters are designed for fast, smooth cutting at high-speeds in clean conditions.

The square cutter edge, designed to reduce friction, provides an extremely smooth clean cut and fast chip clearance. The full chisel cutter is preferred by professional users and recommend for experienced users.

SEMI-CHISEL CUTTERS

The cutter on semi-chisel chains has a slight radius on the leading edge allowing it to stay sharper longer and cut faster in dirty conditions. A semi-chisel chain will take a less aggressive bite, or cut, from the wood.

CHIPPER CUTTERS

Specifically engineered with a large, curved radius, chipper cutters are designed for cutting parallel to the wood grain. Chipper chains are designed for use in sawmills. They are not recommended for handheld use.

SAW CHAIN TYPES 6

SAW CHAIN TYPES

SAW CHAIN BASICS PITCH

It is essentially the size of a saw chain. In order to determine a saw chain’s pitch, measure the distance between the center of any three consecutive rivets and then divide by two.

PITCH

GAUGE

KERF

GAUGE

A saw chain’s gauge is the thickness of a drive link measured at the tang. The guide bar’s gauge is the thickness of the bar groove opening. It’s essential that the drive link thickness c orrectly matches the width of the groove in the guide bar to prevent wear and provide a smooth, consistent, cut.

KERF

A saw chain’s kerf is the thickness of the actual cut in the wood. Optimum kerf for a saw chain is dependent on the chain saw’s horsepower, saw chain speed, guide bar length, and the type of timber being cut.

÷2

PITCHES

GAUGES

1/4"

.043" (1.1mm)

3/8" LP

.050" (1.3mm)

.325"

.058" (1.5mm)

3/8"

.063" (1.6mm)

.404"

.080" (2.0mm)

NARROW KERF

Commonly used on battery and smaller saws, the cutters are slimmer, resulting in a thinner or narrower cut.

KEY INDUSTRY TERMS KEY INDUSTRY TERMS

7

BUMPER LINK SAFETY CHAIN

1

CUTTER TOOTH

5

The cutter tooth is the part of the chain that does the actual cutting. As your saw chain moves around the bar, every individual cutter takes little chips, or bites, from the wood.

4

TIE STRAP

Working as connectors; tie straps work in conjunction with rivets to secure all of the chain parts together into a full loop. Tie straps are also used on the reverse side of a cutter tooth or a guard link securing them in place and connecting the chain’s parts.

1 CUTTER TOOTH Depth Gauge Setting

GUARD LINK SAFETY CHAIN

2

TIE STRAP

6

RIVET

Rivets are the round pegs, that when spun down, create a flat seal. The chain rivets function as a rotational pivot joint and work with the tie straps to hold the chain together.

3 RIVET

Gullet

Top Plate Lead Edge

Ramped Depth Gauge

Cut Clearance

Side Plate Cutting Edge

Rivet Hole(s) Toe

Rivet Hubs

Rivet Hole(s)

Flange Bearing

Heel

SAFETY SAW CHAIN TriLink® safety saw chain incorporates ramped depth gauges to allow smooth high speed cutting while reducing kickback and vibration. All TriLink® safety saw chain has been UL tested in accordance with ANSI B175.1 standards and meets all requirements.

8

SAW CHAIN COMPONENTS

CHAIN COMPONENTS

NON-SAFETY CHAIN

2

DRIVE LINK

A drive link’s tang sits inside a guide bar rail keeping the chain attached and aligned. The power head’s sprocket utilizes the drive links to pull the chain around the guide bar and keep it moving.

4

DRIVE LINK

3

BUMPER LINK

A safety version of a drive link, a bumper link reduces chainsaw kickback while cutting in addition to keeping the chain attached, aligned, and moving.

5

Rivet Hole(s)

BUMPER LINK

GUARD LINK

A guard link is a safety version of a tie strap, reducing the chances of kickback by limiting the cutter tooth from snagging on small branches or other imperfections.

6

GUARD LINK

Rivet Hole(s)

Rivet Hole(s) Tang

Tang

NON-SAFETY SAW CHAIN

VS.

All TriLink® professional non-safety saw chain are designed and engineered for fast, smooth cutting at high speeds in all cutting conditions. Non-Safety saw chain’s do not include bumper links or guard links.

SAW CHAIN COMPONENTS

9

BAR LENGTH

DRIVE LINK ICON

Large, bold placement for quick match to chainsaw’s bar length

A quick reference alpha numeric reference to each individualized change

DRIVE LINK COUNT

FITS

Number of drive links on the chain, the numeric part of the drive link icon

OEM top fitments highlighted to narrow replacement chain search with key brands

BUMP OUT

DIE CUT

Visual extrusion providing focus to key information and color-coding

Showcases the chain while emphasizing

PITCH

DRIVE LINK COUNT

Based on the chainsaw’s power head, converted to an alpha character for our drive link icon

Number of drive links on the chain, the numeric part of the drive link icon

COLOR CODING

TriLink’s color-coded system spans across all chains, bars, and sharpening accessories. Based off the chainsaw’s pitch, the color coding links the bars and sharpening accessories to the correct chain loops, providing a quick visual aid in finding their correct replacement chain, bar, or sharpening tool.

10 PACKAGING INNOVATIONS

PACKAGING INNOVATIONS Utilizing the chain’s pitch and drive link count each chain has a unique identifier for quick reference when replacing your saw chain.

CHAIN PITCH

CHAIN PITCH

&

ALPHA NUMERIC CHARACTER

Q 1/4”

DRIVE LINK COUNT

S / SC

M / MC

L / LC

3/8” LP

.325”

3/8” std (Standard)

(Low Profile)

THE ADDED “C” DENOTES A FULL CHISEL CHAIN

COLOR-CODED PACKAGING

11

TRILINK® PART NO. 14334TK 14340TK 14350TK 14352TK 14355TK 14356TK 15033TK 15040TK 15044TK 15045TK 15049TK 15050TK 15052TK 15053TK 15055TK 15056TK 15057TK 15062TK 25066NKTK 25072NKTK 25080NKTK 25872TK 75072TK 75078TK 76367TK 76374TK 76381TK 85060TK 85068TK 85070TK 85072TK

12 SAW CHAIN ASSORTMENT

CHAIN DESCRIPTION 8in Semi-Chisel Chain 10in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 16in Semi-Chisel Chain 16in Semi-Chisel Chain 8in Semi-Chisel Chain 10in Semi-Chisel Chain 12in Semi-Chisel Chain 12in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 16in Semi-Chisel Chain 16in Semi-Chisel Chain 16in Semi-Chisel Chain 18in Semi-Chisel Chain 16in Semi-Chisel Narrow Kerf Chain 18in Semi-Chisel Narrow Kerf Chain 20in Semi-Chisel 18in Full Chisel Chain 18in Full Chisel Chain 20in Full Chisel Chain 16in Full Chisel Chain 18in Full Chisel Chain 20in Full Chisel Chain 16in Full Chisel Chain 18in Full Chisel Chain 20in Full Chisel Chain 20in Full Chisel Chain

PITCH

GAUGE

3/8" LP 3/8" LP 3/8" LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8” LP 3/8" LP .325" .325" .325" .325" .325" .325” .325” .325" .325” 3/8" 3/8" 3/8" 3/8"

.043” .043” .043” .043" .043” .043" .050" .050" .050" .050” .050” .050” .050” .050” .050” .050” .050” .050” .050” .050” .050” .058” .050” .050” .063” .063” .063” .050” .050” .050” .050”

DRIVE LINK ICON S34.043 S40.043 S50.043 S52.043 S55.043 S56.043 S33 S40 S44 S45 S49 S50 S52 S53 S55 S56 S57 S62 M66NK M72NK M80NK M72.058 MC72 MC78 MC67.063 MC74.063 MC81.063 LC60 LC68 LC70 LC72

EACHES QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

INNER PACK MASTER PACK QTY QTY 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30 5 30

SAW CHAIN ASSORTMENT KEY FITMENTS Ryobi, Craftsman, and many more Husqvarna, Echo, Ryobi, and many more Stihl Husqvarna, Echo, Ryobi, and many more Stihl Husqvarna, Dewalt, Greenworks Craftsman, Greenworks, and many more Echo, Craftsman, Greenworks, and many more Stihl, Echo, and many more Husqvarna, Echo, Greenworks, and many more Poulan and McCulloch Stihl, Remington, and many more Husqvarna, Echo, Craftsman, and many more Remington, Homelite, and many more Stihl, Craftsman, and many more Husqvarna, Echo, Craftsman, and many more Echo, Remington, and many more Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, and many more Husqvarna, Echo, and many more Husqvarna, Craftsman, and many more Husqvarna, Poulan, and many more Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, Craftsman, and many more Stihl Stihl Stihl Husqvarna, Echo, Craftsman, and many more Husqvarna, Poulan, and many more Husqvarna, Echo, and many more Stihl, Husqvarna, Echo, and many more

SAW CHAIN ASSORTMENT

13

2 CHAIN VALUE PACKS Offering two chains in one value pack, we target the top three chains on the market providing value to our customers. The 2 chain value pack also acts as a space saver with a smaller footprint and less packaging material than if the chains were packed individually.

TRILINK® PART NO. 15052X2TK 15056X2TK 15062X2TK

14 SAW CHAIN - 2 Packs

CHAIN DESCRIPTION 14in Semi-Chisel Chain - Two Pack 16in Semi-Chisel Chain - Two Pack 18in Semi-Chisel Chain - Two Pack

PITCH

GAUGE

3/8" LP 3/8" LP 3/8" LP

.050” .050” .050”

DRIVE LINK ICON S52 S56 S62

EACHES QTY 1 1 1

INNER PACK MASTER PACK QTY QTY 5 30 5 30 5 30

SAW CHAIN - 2 PACKS KEY INFORMATION Keeping the consistent look as our single packs, includes all the pertinent chain detail

COLOR-CODING Our drive link icon and the color-coding are prevalent across all chains

2 CHAIN CALL OUT Large, bold call out that highlights the 2 pack value

SMALLER FOOTPRINT Based on the chainsaw’s power head, converted to an alpha character for our drive link icon KEY FITMENTS Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, Craftsman, and many more

SAW CHAIN - 2 PACKS

15

METALLIC FINISH Packaging insert utilizes a metallic ink to correspond with the coloring of the chain’s cutters

KEY INFORMATION Keeping the consistent look as our single packs, includes all the pertinent chain detail

Metallic CUTTERS Die Cut window showcases the Titanium finish on chain

TITANIUM CALL OUT Large, bold focus on chain being made with Titanium coated cutters

TRILINK® PART NO. T65052TK T65056TK T65062TK T75072TK T85072TK

16 TITANIUM SAW CHAIN

CHAIN DESCRIPTION 14in Full Chisel Titanium Chain 16in Full Chisel Titanium Chain 18in Full Chisel Titanium Chain 18in Full Chisel Titanium Chain 20in Full Chisel Titanium Chain

PITCH

GAUGE

3/8" LP 3/8" LP 3/8" LP .325” 3/8”

.050” .050” .050” .050” .050”

DRIVE LINK ICON SC52 SC56 SC62 MC72 LC72

EACHES QTY 1 1 1 1 1

INNER PACK MASTER PACK QTY QTY 5 30 5 30 5 30 5 30 5 30

TITANIUM CHAIN Targeting the professional users our Titanium chain is made with titanium and chrome coated cutters and designed to cut at high-speeds in clean conditions.

Recommended for use by experienced users they cut 20% faster than semi-chisel chains.

FULL CHISEL SAW CHAIN Titanium and CHROME COATED CUTTERS Cuts 20% Faster than semi-chisel chains KEY FITMENTS Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, Craftsman, and many more Husqvarna, Echo, Makita, and many more Stihl, Husqvarna, Makita and many more

TITANIUM SAW CHAIN

17

GUIDE BARS

Guide bars are designed to provide a guide and support rail for the moving saw chain. In addition to detailing out key guide bar types, features, and terminology this section offers a complete listing of our bar and chain combo and guide bar offerings for the packaged parts program.

GUIDE BAR

KEY COMPONENTS TYPES / STYLES PACKAGING INNOVATIONS PRODUCT LISTING

GUIDE BARS

Guide bars can be divided into two key parts: the nose and bar mounts. The bar nose will determine the bar type and the bar mounts determines the correct guide bar for your chainsaw’s power head.

Sprocket

Roller Bearings

GUIDE BAR TYPES:

Carving bars have a small radius nose and are designed for precision shape cutting, pruning, and trimming.

Mini-Laminate have a single rivet in the sprocket nose, are lighter-weight and designed for less demanding tasks.

Laminate bars include four rivets in the sprocket nose and are typically used by the semi-professional users.

The sturdy construction stands up to more demanding cutting situations than a mini-laminate bar.

Replaceable Sprocket Nose (RSN) bars have a detachable nose tip that allows the nose, where most wear and tear happens, to be replaced rather than replacing the whole bar.

Hard Nose bars are constructed from a solid piece of steel and are specifically engineered and designed for use when cutting in dirty conditions.

20 GUIDE BAR TYPES and COMPONENTS

Sprocket Rivet(s)

NOSE - SPROCKET TIP*

*Determined by bar type (Mini-Laminate shown)

GUIDE BAR COMPONENTS Bar Mount

Adjustment Hole

Saw Chain Lead-In Edge

Mounting Slot

Oil Hole

Bar Rails

SIDE RAILS

Bar Rails

BAR MOUNT

GUIDE BAR TYPES and COMPONENTS

21

BAR AND CHAIN COMBOS DRIVE LINK ICON

Our color-coded reference corresponding to the guide bar and the chain loop

SMALLER FOOTPRINT

The slim clamshell design eliminates wasted space and material with a better product presentation

PAINT SCHEME

Custom bar design visually adding attention and brand building distinction

DRIVE LINK ICON

TRILINK® PART NO. BL1501450-1074TK BM1501452-1041TK BM1501656-1041TK BM1501862-1041TK BL2501872-11095TK BL2502078-11041TK BL7502078-11095TK BR7632081-4025TK BL8502070-4176TK BL8502072-4025TK

BAR and CHAIN DESCRIPTION 14in Laminate Bar and Semi-Chisel Chain 14in Mini-Laminate Bar and Semi-Chisel Chain 16in Mini-Laminate Bar and Semi-Chisel Chain 18in Mini-Laminate Bar and Semi-Chisel Chain 18in Laminate Bar and Semi-Chisel Chain 20in Laminate Bar and Full Chisel Chain 20in Laminate Bar and Full Chisel Chain 20in RSN Bar and Full Chisel Chain 20in Laminate Bar and Full Chisel Chain 20in Laminate Bar and Full Chisel Chain

GUIDE BAR (only) TRILINK® PART NO. L3502072-11095TK

BAR and CHAIN DESCRIPTION 20in Laminate Bar and Full Chisel Chain

Added to the new bar design for customer reference and confirming bar and chain fitment compatibility

22 GUIDE BAR ASSORTMENT

GUIDE BAR Assortment PITCH

GAUGE

3/8" LP 3/8" LP 3/8" LP 3/8” LP .325" .325" .325" .325" .3/8" 3/8"

.050” .050” .050” .050” .050” .050” .050” .063” .050” .050”

PITCH

GAUGE

3/8"

.050”

DRIVE LINK ICON S50 S52 S56 S62 M72 M78 MC78 MC81.063 LC70 LC72

BAR MOUNT 1074 1041 1041 1041 11095 11041 11095 4176 4025 4025

EACHES QTY 1 1 1 1 1 1 1 1 1 1

INNER PACK MASTER PACK QTY QTY 3 12 3 12 3 12 3 12 3 12 3 12 3 12 3 12 3 12 3 12

DRIVE LINK ICON L72

BAR MOUNT 11095

EACHES QTY 1

INNER PACK MASTER PACK KEY FITMENTS QTY QTY 3 12 Husqvarna, Makita, Poulan and more

KEY FITMENTS Stihl Husqvarna, Echo, Craftsman and more Husqvarna, Echo, Craftsman and more Husqvarna, Echo, Craftsman and more Husqvarna, Makita, Poulan and more Echo, Pouian, Craftsman and more Husqvarna, Makita, Poulan and more Stihl Echo, Craftsman, Poulan and more Stihl

GUIDE BAR ASSORTMENT

23

Accessories

The safest chain is a sharp chain. Proper sharpening and maintenance ensures that your chainsaw and saw chain continue to run smooth, cut fast, and last longer. TriLink® offers a complete range of maintenance tools, cutting accessories, and safety equipment to fit all of your saw chain needs. As your guide bar and saw chain ages proper maintenance or replacement is highly recommended to ensure top performance.

Accessories

SHARPENING FIELD SAFETY

ROUND FILES

Packaged 2 per pack, our precision spiral cut design provides fast sharpening without scoring the cutter surface

8 PIECE SHARPENING FIELD KIT ROUND FILE AND FILING GUIDE

Includes a round file, a chromed file guide, and handle enabling user to sharpen the chain at the correct angles with precision

A complete solution for sharpening chain in the field, including round file for each size, filing guide, handle, flat file, depth gauge, and a carrying case

FLAT FILE AND DEPTH GAUGE

A complete filing system for resetting depth gauges after sharpening

SHARPENING STONES

Three to a pack they are designed for use with Electric Sharpeners and precision engineered for precise, fast, and efficient sharpening

26 SHARPENING ACCESSORIES

12V DC Electric SHARPENER

Includes heavy-duty power connection cable, chain angle guide, replacement nose tips, tightening wrench, and one of each sharpening stone size; all you need to sharpen chain in one package

SHARPENING ACCESSORIES

Professional Chain Grinder

Mounts to bench or wall for quick, convenient, and precise chain sharpening

BAR MOUNT SHARPENER

Mounting directly to the guide bar this assists in manually sharpening saw chain to precise settings

SHARPENING ACCESSORIES TRILINK® PART NO. 5322FTK 3162FTK 7322FTK 532FGTK 316FGTK 732FGTK 532SSTK 316SSTK 732SSTK BMS2000TK DGFF001TK ECS12VDCTK FK001TK PCG001TK

DESCRIPTION 5/32” Replacement Round Files - 2 Pack 3/16” Replacement Round Files - 2 Pack 7/32” Replacement Round Files - 2 Pack 5/32” Round File and Filing Guide 3/16” Round File and Filing Guide 7/32” Round File and Filing Guide 5/32” Sharpening Stones - 3 Pack 3/16” Sharpening Stones - 3 Pack 7/32” Sharpening Stones - 3 Pack Bar Mount Sharpener Flat File and Depth Gauge 12 Volt DC Electric Sharpener 8 Piece Sharpening Field Kit Professional Chain Grinder

PITCH 3/8" LP .325" 3/8" 3/8” LP .325” 3/8” 3/8” LP .325” 3/8” All All All All All

COLOR CODING

EACHES QTY 2 2 2 1 1 1 3 3 3 1 1 1 1 1

INNER PACK MASTER PACK QTY QTY 8 192 8 192 8 192 4 100 4 100 4 100 10 200 10 200 10 200 1 20 8 192 2 20 5 20 1 1

SHARPENING ACCESSORIES

27

Felling Wedges

Designed for use in preventing pinching of the chainsaw while cutting and aiding in the directional felling of trees; offered in both 5” and 8” size configurations

28 FIELD ACCESSORIES

SCRENCH

Enables quick and easy field adjustments to keep your chainsaw, includes a 13mm and 19mm deep socket for guide bar nuts and spark plugs, and flat head screwdriver for adjusting chain tension

FIELD ACCESSORIES

Grease Gun/Injector

Easily adds needed lubrication to your guide bar; designed for multiple use with quick, easy, re-loadable refills

FIELD ACCESSORIES TRILINK® PART NO. FW001TK FW001TK LG001TK TS1319TK

DESCRIPTION 5” Felling Wedge 8” Felling Wedge Grease/Lubrication Injector Scrench (Screwdriver / Wrench combo)

EACHES QTY 1 1 1 1

INNER PACK MASTER PACK QTY QTY 4 120 3 72 4 120 8 160

FIELD ACCESSORIES

29

Safety CHAPS

One size fits most design, with 39” pant length, and an open back design providing mobility and comfort even in hot working conditions UL Certified and Approved Rated for protection from GAS SAWS ONLY

30 SAFETY ACCESSORIES

Safety GLOVES

Made with a breathable padded spandex, secure grip patches located on the inner palms, ballistic nylon protection on the back of the left hand for protection from chainsaw kickback, and elastic Velcro for adjustable fit Rated for protection from GAS SAWS ONLY

SAFETY ACCESSORIES

Safety Helmet

Meeting ANSI Z89.1-2003 Type 1 Class E, G, and C standards, the safety helmet comes with a ratchet style harness to adjust fit, wide sealing ear muffs with noise reduction up to 20 decibels, and a wire mesh face guard to protect from debris spray

Foldable ear Muffs

Foldable, adjustable, and comfortable with a one size fits most design, noise reduction rating of 20 decibels, and meets ANSI S3.19 NRR22 standards

SAFETY ACCESSORIES TRILINK® PART NO. CPSXL500TK EM001TK GV001TK PSH001TK

DESCRIPTION Safety Chainsaw Chaps Foldable Ear Muffs Chainsaw Safety Gloves Safety Helmet w/ Ear Muffs & Face Shield

EACHES QTY 1 1 1 1

INNER PACK MASTER PACK QTY QTY 3 3 3 12 6 72 1 12

SAFETY ACCESSORIES

31

800-457-7444

866-472-0298

orders@stens.com

Saw Chain and Accessories Packaged Parts Program

ORDER FORM

CUSTOMER INFO Customer Name:

Vendor Number:

CUSTOMER ADDRESS Address:

City:

State:

Postal Code:

Country:

Phone:

Parts will ship in full Inner Packs only; inner pack quantities listed below.

1 order = 1 Full PDQ pack

SAW CHAIN LOOPS TRILINK® PART NO. 14334TK 14340TK 14350TK 14352TK 14355TK 14356TK 15033TK 15040TK 15044TK 15045TK 15049TK 15050TK 15052TK 15053TK 15055TK 15056TK 15057TK 15062TK 25066NKTK 25072NKTK 25080NKTK 25872TK

PART DESCRIPTION 8in Semi-Chisel Chain 10in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 16in Semi-Chisel Chain 16in Semi-Chisel Chain 8in Semi-Chisel Chain 10in Semi-Chisel Chain 12in Semi-Chisel Chain 12in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 14in Semi-Chisel Chain 16in Semi-Chisel Chain 16in Semi-Chisel Chain 16in Semi-Chisel Chain 18in Semi-Chisel Chain 16in Semi-Chisel Narrow Kerf Chain 18in Semi-Chisel Narrow Kerf Chain 20in Semi-Chisel 18in Full Chisel Chain

800-457-7444

866-472-0298

INNER PACK QTY. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

ORDER QTY.

orders@stens.com

Saw Chain and Accessories Packaged Parts Program

ORDER FORM

Parts will ship in full Inner Packs only; quantities listed below.

1 order = 1 Full PDQ pack

SAW CHAIN LOOPS (continued) TRILINK® PART NO. 75072TK 75078TK 76367TK 76374TK 76381TK 85060TK 85068TK 85070TK 85072TK

PART DESCRIPTION 18in Full Chisel Chain 20in Full Chisel Chain 16in Full Chisel Chain 18in Full Chisel Chain 20in Full Chisel Chain 16in Full Chisel Chain 18in Full Chisel Chain 20in Full Chisel Chain 20in Full Chisel Chain

INNER PACK QTY. 5 5 5 5 5 5 5 5 5

ORDER QTY.

INNER PACK QTY. 5 5 5

ORDER QTY.

INNER PACK QTY. 5 5 5 5 5

ORDER QTY.

INNER PACK QTY. 3 3 3 3 3 3 3 3 3 3

ORDER QTY.

SAW CHAIN 2 Packs TRILINK® PART NO. 15052X2TK 15056X2TK 15062X2TK

PART DESCRIPTION 14in Semi-Chisel Chain - Two Pack 16in Semi-Chisel Chain - Two Pack 18in Semi-Chisel Chain - Two Pack

TITANIUM CHAIN TRILINK® PART NO. T65052TK T65056TK T65062TK T75072TK T85072TK

PART DESCRIPTION 14in Full Chisel Titanium Chain 16in Full Chisel Titanium Chain 18in Full Chisel Titanium Chain 18in Full Chisel Titanium Chain 20in Full Chisel Titanium Chain

BAR AND CHAIN COMBOS TRILINK® PART NO. BL1501450-1074TK BM1501452-1041TK BM1501656-1041TK BM1501862-1041TK BL2501872-11095TK BL2502078-11041TK BL7502078-11095TK BR7632081-4025TK BL8502070-4176TK BL8502072-4025TK

PART DESCRIPTION 14in Laminate Bar and Semi-Chisel Chain 14in Mini-Laminate Bar and Semi-Chisel Chain 16in Mini-Laminate Bar and Semi-Chisel Chain 18in Mini-Laminate Bar and Semi-Chisel Chain 18in Laminate Bar and Semi-Chisel Chain 20in Laminate Bar and Full Chisel Chain 20in Laminate Bar and Full Chisel Chain 20in RSN Bar and Full Chisel Chain 20in Laminate Bar and Full Chisel Chain 20in Laminate Bar and Full Chisel Chain

800-457-7444

866-472-0298

orders@stens.com

Saw Chain and Accessories Packaged Parts Program

ORDER FORM

Parts will ship in full Inner Packs only; quantities listed below.

1 order = 1 Full PDQ pack

GUIDE BAR TRILINK® PART NO. L3502072-11095TK

PART DESCRIPTION 20in Laminate Bar and Full Chisel Chain

INNER PACK QTY. 3

ORDER QTY.

INNER PACK QTY. 8 8 8 4 4 4 10 10 10 1 8 2 5 1

ORDER QTY.

INNER PACK QTY. 4 3 4 8

ORDER QTY.

INNER PACK QTY. 3 3 6 1

ORDER QTY.

SHARPENING ACCESSORIES TRILINK® PART NO. 5322FTK 3162FTK 7322FTK 532FGTK 316FGTK 732FGTK 532SSTK 316SSTK 732SSTK BMS2000TK DGFF001TK ECS12VDCTK FK001TK PCG001TK

PART DESCRIPTION 5/32” Replacement Round Files - 2 Pack 3/16” Replacement Round Files - 2 Pack 7/32” Replacement Round Files - 2 Pack 5/32” Round File and Filing Guide 3/16” Round File and Filing Guide 7/32” Round File and Filing Guide 5/32” Sharpening Stones - 3 Pack 3/16” Sharpening Stones - 3 Pack 7/32” Sharpening Stones - 3 Pack Bar Mount Sharpener Flat File and Depth Gauge 12 Volt DC Electric Sharpener 8 Piece Sharpening Field Kit Professional Chain Grinder

FIELD ACCESSORIES TRILINK® PART NO. FW001TK FW001TK LG001TK TS1319TK

PART DESCRIPTION 5” Felling Wedge 8” Felling Wedge Grease/Lubrication Injector Scrench (Screwdriver / Wrench combo)

SAFETY ACCESSORIES TRILINK® PART NO. CPSXL500TK EM001TK GV001TK PSH001TK

PART DESCRIPTION Safety Chainsaw Chaps Foldable Ear Muffs Chainsaw Safety Gloves Safety Helmet w/ Ear Muffs & Face Shield

CUSTOMER SIGNATURE

800-457-7444

866-472-0298

orders@stens.com