ARIADROP: Fiber to the MDU (FTTM)
2015 Issue 1
BECAUSE PERFORMANCE MATTERS
ARIADROP: Fiber to the MDU (FTTM)
1
ARIADROP™
DS-BS-2
04/07/2015
Overview ARIA Technologies ARIADROP™ System is designed to provide both labor and material savings to service providers deploying fiber to multiple dwelling unit (MDU) buildings. Utilizing pre-terminated solutions, ARIADROP™ products eliminate or minimize splicing and testing ensuring high quality networks throughout the MDU building. ARIA Technologies ARIADROP™ System is the ideal plug and play solution for delivering the fastest, most reliable service for MDUs and is available in configurations to meet the unique requirements of each MDU Design. Made to order pre-term lengths accommodate varying cable pathways and distances between distribution points. Pre-connectorized solutions assist with meeting demanding installation schedules.
Features and Benefits
Products
•
•
ARIA Splitter Cassettes
•
ARIA POE (Point of Entry) Building Entrance Cabinet
•
ARIA Small MDU Splitter Panel Building Entrance Cabinet
•
ARIA Tri-Panel Pre-Terminated Riser Distribution Panel
•
ARIA Jumpers (Patch Cords)
Pre-terminated Enclosures -Eliminate splicing or field termination reducing labor costs -Ensure a higher quality network -Speed up deployment times and help meet schedules
•
Spool vs. Reel System -No damage from reel “choke” mechanisms
•
Compact Designs -Minimal wall space required
•
Quality -Products 3rd party tested to Telcordia GR326, 1209, 1221
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
ARIADROP: Fiber to the MDU (FTTM) ARIADROP™
2 DS-BS-2
04/07/2015
Tri-Panel Riser Distribution Panels
Optical PON Splitters Point of Entry (POE) Building Entrance Cabinets
ARIA Technologies ARIADROP™ system enclosures can be supplied with Stubbed or Pigtailed Tri-Panel Distribution Panels which would be routed down the riser or cable pathways and “home run” down to the Building Entrance Panel at the Point of Entry (POE) and spliced to the OSP Backbone or Trunk Cable entering from the street or manhole. To further speed up deployment, these Tri-Panel Distribution Panels can be pre-loaded with cables connectorized at both ends for routing down to the Building Entrance Panel. Building Entrance Panels can be preloaded with Optical PON Splitters to further speed deployment and meet deadlines for installation.
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
ARIADROP: Fiber to the MDU (FTTM) Optical PON Splitters
DS-BS-2
2U LGX Cassette with One 1x32 Splitter One 1x32 PLC Splitter LC/APC Ports (Green) (UPC Available) Loaded into a 2U LGX Cassette Black powdercoated aluminum case
Top adapter port is the input port*
Features Low Insertion Loss High Isolation Low PDL Compact Design Good Channel-to-channel Uniformity Wide Operating Wavelength High Reliability and Stability
*Input can also be a 900um fiber in rear of cassette to splice to OSP Fibers
Applications FTTH/FTTM Systems PON Network CATV Links Communication Equipment
Specifications Parameter
Value
Operating Wavelength (nm)
1260~1650
Insertion Loss (dB)
17.2
Loss Uniformity (dB)
1.5
Polarization Dependent Loss (PDL) (dB)
0.3
Return Loss (dB)
55
Directivity (dB)
55
Wavelength Dependent Loss (dB)
0.8
Operating Temperature (째F)
-40~+85
Storage Temperature (째F)
-40~+85
Compliance Telcordia GR-1209-CORE Telcordia GR-1221-CORE RoHS
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
3 04/07/2015
ARIADROP: Fiber to the MDU (FTTM)
4
Optical PON Splitters
DS-BS-2
04/07/2015
Dimensions 129 mm
INPUT
100 mm
129 mm
1
5
9
13
2
6
10
14
3
7
11
15
4
8
12
16
17
21
25
29
18
22
26
30
19
23
27
31
20
24
28
32
ARIA
58 mm
Part Number
P O N - 1 X3 2 -
1 Adapter Output Type LCU = LC/UPC Singlemode LCA = LC/APC Singlemode
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
1
1
1
-
2
2
2 Adapter Input Type BK = Bulkhead adapter in front PG = fiber pigtail in rear (for splicing)
ARIADROP: Fiber to the MDU (FTTM)
5
Building Entrance Cabinets
DS-BS-2
04/07/2015
AWM Point of Entry (POE) ARIA Technologies AWM Point of Entry (POE) Building Entrance Cabinets provide an efficient point of entry in the MDU for splicing OSP Cable to Distribution Riser Cables. The ARIA AWM Point of Entry (POE) Building Entrance Cabinet holds up to fifteen 1x32 splitter cassettes and accommodates up to 480 output fibers. Enclosure dimensions: 35” x 24” x 12” (HxWxD). Ample cable slack is provided via the radius guides at each panel location on both the right and left sides. Additionally, cables are managed at every panel. A platform for mounting splice trays is provided at the bottom for easy access. Compression fittings and cable brackets are supplied standard to minimize the ordering of parts. 24.00" 3.00" 2.75"
.75"
11.00"
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32 32
ARIA
each shelf can accommodate up to 96 output fibers
Radius guides
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
ARIA
ARIA
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32 32
32 32
32 32
32 32
32 32
32 32
32 32
32 32
32 32
32 32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
ARIA
ARIA
33" 32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
ARIA
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
ARIA
32 32
ARIA
Splice trays Splice tray platform and radius guides
Front
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
Radius guides
fiber mgmt. tray
ARIA
32
ARIA
Radius guides
32
32 32
32
1x32 cassette
ARIA
32
32
SRB bracket
ARIA
32
32
2.00"
32
32 32
32
32
compression fitting
32
32 32
ARIA
fiber mgmt. tray
32
4.00"
ARIA
32 32
6.00"
3.00"
32
32
32
1x32 coupler cassette
ARIA
2.75"
32
32
32
35.00"
12.00" .75"
Compression fitting or SRB bracket (top or bottom)
Splice trays Radius guide
Side
ARIADROP: Fiber to the MDU (FTTM)
6
Building Entrance Cabinets
DS-BS-2
04/07/2015
1x32 Splitter Cassette 88 mm (3U LGX)
100 mm
Input leg
Input
129 mm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
100 mm 32 SC openings
ARIA
Rear
Part Number
AW M - PO E -
1 Quantity of 1x32
Splitter Cassettes 01 = One 1x32 Splitter Cassette 02 = Two 1x32 Splitter Cassettes 03 = Three 1x32 Splitter Cassettes 04 = Four 1x32 Splitter Cassettes 05 = Five 1x32 Splitter Cassettes 06 = Six 1x32 Splitter Cassettes 07 = Seven 1x32 Splitter Cassettes 08 = Eight 1x32 Splitter Cassettes 09 = Nine 1x32 Splitter Cassettes 10 = Ten 1x32 Splitter Cassettes 11 = Eleven 1x32 Splitter Cassettes 12 = Twelve 1x32 Splitter Cassettes 13 = Thirteen 1x32 Splitter Cassettes 14 = Fourteen 1x32 Splitter Cassettes 15 = Fifteen 1x32 Splitter Cassettes
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Front
Side
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
1
1
-
2
2
2
-
2 Adapter Type SCU = SC/UPC Singlemode SCA = SC/APC Singlemode
3
3 3 Splitter Input BK = bulkhead adapter in rear PG = fiber pigtail in rear (for splicing)
ARIADROP: Fiber to the MDU (FTTM)
7
Building Entrance Cabinets
DS-BS-2
04/07/2015
Small MDU Splitter Panel ARIA Technologies Small MDU Splitter Panels provide a distribution point where OSP or Distribution cables can be spliced to preloaded PON Splitters housed inside the unit. The panel is wall mounted within the MDU and supplied fully tested and ready for deployment. Panel includes removable grounding or strain relief lugs. The lid is pad-lockable. Contact the sales department for other configurations.
Capacity Six various sized cable entry holes and their associated compression fittings are provided to enable multiple locations for incoming OSP or Distribution Cable and Patchcords. Capacity: 24 fiber SC with 1 Splice Tray or 32 fiber LC with 2 Splice Trays One splice tray is pre-loaded with up to three 1x8 splitters.
Part Number
SMDU- - 1
1 Quantity of 1x8 Splitters 1 = One 1x8 Splitter (SC/LC) 2 = Two 1x8 Splitters (SC/LC) 3 = Three 1x8 Splitters (SC/LC) 4 = Four 1x8 Splitters (LC)
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
2
3
3
2 Number of Splice Trays 1 = 1 Splice Tray (SC/LC) 2 = 2 Splice Trays (LC)
3 3 Splitter Output Type SCU = SC/UPC Singlemode SCA = SC/APC Singlemode LCU = LC/UPC Singlemode LCA = LC/APC Singlemode
ARIADROP: Fiber to the MDU (FTTM) Distribution Panels
DS-BS-2
Tri-Panel Pre-Terminated Riser Distribution Panels ARIA Tri-Panel Pre-terminated Riser Distribution Panels are deployed typically on every 3-4 floors of the MDU. Three sizes are available accommodating 24, 48, and 72 SC connectors or 48, 96, and 144 LC connectors per Panel. Tri-Panels can be preloaded at the factory with a pigtail or stub cable for splicing at the Building Entrance Panel, or connectorized at both ends with SC or LC connectors. Double-ended panels are supplied with a protective sock over the connectors as well as a pulling eye for easy routing to the POE. The Interlocking Plenum (“Cable-in-Conduit”) stub cable type option can further reduce deployment time and cost by decreasing the labor to just one placement of cable and conduit.
TRI-2X Dimensions: 7”x12”x3.75” (HxWxD) Capacity: Holds 2 adapter plates 6-Pack duplex SC or LC: 24 fibers 6-Pack quad LC: 48 fibers Cable Entry/Exit Holes: 2 patch side and 2 splice side
TRI-4X Dimensions: 7”x12”x7.6” (HxWxD) Capacity: Holds 4 adapter plates 6-Pack duplex SC or LC: 48 fibers 6-Pack quad LC: 96 fibers Cable Entry/Exit Holes: 2 patch side and 2 splice side
TRI-6X Dimensions: 12”x12”x6.6” (HxWxD) Capacity: Holds 6 adapter plates 6-Pack duplex SC or LC: 72 fibers 6-Pack quad LC: 144 fibers Cable Entry/Exit Holes: 2 patch side and 2 splice side
102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
8
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
04/07/2015
ARIADROP: Fiber to the MDU (FTTM)
9
Distribution Panels
DS-BS-2
04/07/2015
Tri-Panel Pre-Terminated Riser Distribution Panels •
Optional lock for patch compartment and separate lock for splice compartment available (Part Number: LOCK252)
•
Single door design requires less wall space
•
Angled adapter plate mounting surface makes it easy to access the connectors
•
All metal construction offered in white or black
•
Sizable splicing compartment provides ample room for pigtail storage and protection
Part Number
TRI -
1
1
-
2
2
- 3
1 Enclosure Size
4
4
5
6
6
5 Fiber Type
2X = TRI-2X 4X = TRI-4X 6X = TRI-6X
2 Adapter Plate Type 06 = 6 Port (SC) 08 = 8 Port (SC) 12 = 12 Port (SC/LC) 24 = 24 Port (LC)
3 Adapter Plate Quantity
1 = 1 Plate 2 = 2 Plates 3 = 3 Plates 4 = 4 Plates 5 = 5 Plates 6 = 6 Plates
4 Adapter Type Singlemode SCU = SC/UPC SCA = SC/APC LCU = LC/UPC LCA = LC/APC 102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
4
- -
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com
Singlemode S = SMF-28e+ B = SMF Bend Insensitive G.657 A/B
6 Stub Cable Type DR = Distribution Riser Rated DP = Distribution Style Plenum Rated AP = Interlocking Armor Plenum Rated IR = Indoor/Outdoor Riser Rated IP = Indoor/Outdoor Plenum Rated OA = Outside Plant Armored ON = Outside Plant Non-Armored AJ = Non-Armored Alternative Jacket
-
7
7
7
-
8
8
8
8
-
9
7 Stub Connectors 000 = No Connectors Singlemode SCU = SC/UPC SCA = SC/APC LCU = LC/UPC LCA = LC/APC
8 Stub Length XXXF = XXX Feet XXXM = XXX Meters
9 Enclosure Color B = Black W = White
ARIADROP: Fiber to the MDU (FTTM)
10
Fiber Optic Cable Assemblies
DS-BS-2
04/07/2015
Jumpers (Patch Cords) ARIA Technologies offers a complete line of simplex and duplex jumpers in singlemode and multimode configurations with Corning, Draka, and OFS fiber that is manufactured to Telcordia GR326-CORE Issue 4 specifications. Custom colors are available for easy identification in CATV headends, Telco COs, or Data Centers.
Features Free of surface defects with a proper radius of curvature, fiber height, and apex offset. Low insertion loss: 0.4dB max and <0.2dB typical. Low return loss: <-55dB for UPC and <-65dB for APC. Easy to remove buffer coating. 50 degree angled boots are available Meets or exceeds all industry standards for singlemode fiber performance.
Part Number 1
R A-
2
2
- -
1 Cable Size
4
4
4
5
5
4 Connector Type End 1
1 = 1.6 mm 2 = 2.0 mm
2 Cable Construction 01 = Simplex 02 = Duplex
3 Fiber Type Singlemode S = SMF-28e+ B = SMF Bend Insensitive G.657 A/B Multimode 1 = 62.5/125μm 2 = 50/125μm 3 = 50/125μm OM3 4 = 50/125μm OM4 102 Wright Brothers Ave Livermore, CA 94550 www.ariatech.com
3
-
5
-
6
6
6
6
5 Connector Type End 2
Singlemode SCU = SC/UPC SCA = SC/APC LCU = LC/UPC LCA = LC/APC LU5 = LC/UPC with 50° boot FCU = FC/UPC FCA = FC/APC STU = ST/UPC
Singlemode SCU = SC/UPC SCA = SC/APC LCU = LC/UPC LCA = LC/APC LU5 = LC/UPC with 50° boot FCU = FC/UPC FCA = FC/APC STU = ST/UPC
Multimode SCM = SC LCM = LC LM5 = LC with 50° boot FCM = FC STM = ST
Multimode SCM = SC LCM = LC LM5 = LC with 50° boot FCM = FC STM = ST
000 = Pigtail (No Connector)
6 Length XXXF = Length in Feet XXXM = Length in Meters
Phone (925) 447-7500 Fax (925) 447-7511 sales@ariatech.com