ARDEX Torch Applied Membranes Associated Products ARDEX WPM 240 (SHELTERBIT PRIMER) PRIMER FOR BITUMINIOUS MEMBRANES A solvent based bitumen modified primer to be used to seal and prepare the substrate prior to the installation of ARDEX Torch Applied Bitumen membranes.
ARDEX PAVER SUPPORT PAD ARDEX Paver Support Pads are pads specifically designed to protect ARDEX Sheet Membranes when laying pavers over the membrane.
PRODUCT DESCRIPTION
The installation of Paver Support Pads also provides excellent drainage under the pavers thus avoiding the risk of paver flooding.
Black liquid comprising a bitumen cut dissolved in mineral spirits.
ARDEX Paver Support Pads are positioned at each corner of each paver installed as indicated in the diagrams below:-
PACKAGING
PACKAGING
5 litres and 20 litres.
Pack of 300
20mm
SHELF LIFE 12 months in the original unopened packaging stored at 23˚C.
COVERAGE Coverage of ARDEX WPM 240 (Shelterbit) Primer is approximately 5m2 per litre. Coverage will vary depending on the porosity of the substrate surface.
DRYING TIME Approx. 1-2 hours @ 23˚C.
APPLICATION Surface preparation: Ensure that the surface to be primed is dry and free from dust, oil, paint, curing compounds and any other contaminating materials.
Application: Stir contents well before use. Apply by brush, roller or airless spray. Primer must be dry before applying membrane.
CLEAN UP Wash equipment with ARDEX WPM 290 (Shelter WA) Solvent.
ARDEX DROPPER Formed from Butyral rubber these Outlets are available in a range of sizes to suit various drainage piping. The Outlets are inserted into the pipe, sealed into the pipe with silicone and the ARDEX Sheet Membranes are torched or bonded directly onto the Outlet providing an easy, quick and secure watertight seal.
FLAMMABILITY ARDEX WPM 240 Primer is classified flammable. It is essential to ensure the primer has fully dried before the ARDEX Torch Applied Bitumen Membranes are installed.
FIRST AID Swallowed: Give water to clean mouth. Do not induce vomiting. Skin: remove contaminated clothing. Wash skin thoroughly with soap and water. Eyes: hold open and flood with water for at least 15 minutes. Inhalation: remove to fresh air. If breathing is difficult administer oxygen. If irritation continues seek medical attention promptly.
LIMITATIONS Primer should be used with appropriate mask and breathing apparatus in areas with poor ventilation/air flow.
Stock Sizes 65mm OD 100mm OD