Golf Estudio by Andres Erburu

table of contents Acer............................................... 2 Power Play................................... 24 Dynacraft...................................... 36 iBella............................................ 42 Synchron...................................... 44 Tour Gear..................................... 45 Junior Clubs................................. 46 Wedges........................................ 48 Putters......................................... 54 Putter Shafts................................ 60 Graphite Shafts............................ 62 Steel Shafts.................................. 93 Grips.......................................... 102 Headcovers................................ 130 Gloves........................................ 131 Accessories................................ 132 Clubmaking Tools & Supplies...... 134 Reference................................... 142

ACER XF TITANIUM DRIVERS

THE XF GENERATI XTRA FORGIVING • XTRA FAR • XTRA FUN EXTRA PERFORMANCE IN A SUPER SLEEK PACKAGE

ACER XF TITANIUM DRIVER

ACER XF DRAW TITANIUM DRIVER

ION HAS ARRIVED XTRA FRIENDLY • XTRA FANTASTIC If you are sick and tired of hearing that this driver is “our longest and straightest…blah, blah, blah…our highest moment of inertia…blah, blah, blah, blah...and it has our deepest center of gravity to promote higher launch and low spin…blah, blah, blah”, then try this on for size. Do you want to have fun? You want to hit the ball far? Do you want to hit the ball in your own fairway? And do you want to enjoy golf with family and friends? Certainly you do! Then one of these three new models of the Acer XF series is right for you. How do we know? We made certain that each one of these drivers produces a different end result based on the most common challenges that golfers face today.

EXTRA FORGIVENESS • superior accuracy, even on mis-hits

Acer XF The Acer XF is our flagship model and available in a variety of lofts to suit players of all skill levels. The classic appearance has a lot of functionality found in those national name brand clubs but at a fraction of the cost. After all, you are simply looking for a driver that will provide you with all that extra forgiveness without worrying about all that technical mumbo jumbo. The Acer XF is finished with a durable black PVD coating which provides a stunning appearance that will make you the envy of your foursome.

CLASSIC SHAPE WITH CUTTING-EDGE FEATURES • pear-shaped profile • CAD designed BLACK PVD FINISH • sleek non-glare cosmetics

Distance yourself from the competition by adding power, confidence and forgiveness back to AVAILABLE STANDARD OR DRAW • choose standard for all player levels • choose draw to reduce slices

your game with the stylish Acer XF titanium driver series. Acer XF Draw Frustrated that the only fairways you manage to hit aren’t the ones you are aiming at? If that sounds like you, the XF Draw is the ultimate slice buster. Based upon our flagship model, the Draw version utilizes an offset hosel and more closed face angle to help square the face at impact. This provides much needed assistance to put you on the straight and narrow path to your own fairway (as well as lower scores). Maybe you don’t have time with you busy lifestyle to take lessons in order to solve your woes off of the tee. The Acer XF Draw (anti-slice) evens out the playing field by making you next shot straighter and further than conventional drivers you have tried in the past in much the same way offset irons benefit millions of golfers on a daily basis. Don’t dread your next shot off of the tee. Knock the snot out of it with confidence using the

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Driver

9.5º

58º

200 g

Square

460 cc

45"

Driver

10.5º

58º

200 g

1º Closed

460 cc

45"

Driver

12º

58º

200 g

1º Closed

460 cc

45"

Driver

14º

58º

200 g

1º Closed

460 cc

45"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Acer XF Draw.

ACER XF TITANIUM DRIVER

Acer XF Titanium Driver Available RH: 9.5º, 10.5°, 12°, 14º Available LH: 10.5°, 12º, 14° #TM-12853

ACER XF DRAW TITANIUM DRIVER

Bore Type: M1 Face Height: 55 mm Breadth: 114 mm

Acer XF Draw Titanium Driver Available RH: #10.5°, 12° Available LH: #10.5°, 12º #TM-1287 Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Driver

10.5º

58º

200 g

2º Closed

460 cc

45"

Driver

12º

58º

200 g

2º Closed

460 cc

45"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 55 mm Breadth: 114 mm

ACER XF LEGERRA TITANIUM DRIVER

JOIN THE LIGHTWE

EIGHT REVOLUTION LIGHTER HEADWEIGHT MEANS MORE DISTANCE WITHOUT MORE EFFORT

HOW TO PAIR THE LEGGERA FOR MAXIMUM DISTANCE The Acer XF Leggera is designed specifically for those who already hit a fairly straight ball but seeking the maximum amount of distance off of the tee. If you are not of Italian descent, Leggera translates into light

A typical modern driver weighs

about 320g.

By smartly pairing the

and here is how this driver works.

Acer XF Leggera with lightweight shafts

Golfers try to obtain more distance by using a lighter weight shaft, which most do so already. But that is

and grips, you can easily achieve a

only half of the equation if someone is seeking additional distance. The other component for tape measure

club that weighs 275g or less. That

drives is to increase the club length for greater leverage. But there is a potential problem. You see, existing

translates in faster clubhead speed and

head weights are too great to allow drivers to be made longer than they are already today creating a club that feels head heavy and unwieldy. This situation only defeats the purpose of a longer club by resulting into

more distance, without any extra effort.

In shafts, look to the new generation

of lighter weight models.

More and

a weak fade or slice off of the tee. And who wants that?

more manufacturers are opting to use

The solution is to marry a lighter weight head to a lighter and longer length shaft which further reduces

55g shafts as their stock shaft offering

the overall weight of the club for an even faster clubhead speed. Realize that manufacturers can’t just

for further weight reduction and there

magically remove weight from a massive 460cc titanium driver without some consequences. That is why

are some shafts available in the 40g

we shed the weight from only the crown area using a new construction technique. Our super-thin crown technology ensures the center of gravity is in the right place to create those monstrous drives you have only

range. The True Ace Death Stick and the new Acculite graphite shafts from Apollo, for example, are available at 45-

dreamed of.

55g and reasonably priced.

Greed is good, so go long and not wrong, with the Acer XF Leggera…

In grips, many lightweight grips are

available, notably the WinnLite series, with weights around 25g. Often you will find large weight savings by simply

LIGHTER WEIGHT CLUBHEAD • faster swingspeed for more distance • pair with lightweight shaft and grip for maximum results BLACK PVD FINISH WITH WHITE CROWN • more confidence at address THINNER CROWN • optimal center of gravity

changing out grips.

Acer XF Leggera Titanium Driver Available RH: 9.5°, 10.5°, 12° Available LH: 10.5° #TM-1288

nice balance and swingweight and to provide more leverage for even greater

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Driver

9.5°

57°

190 g

1° Closed

460 cc

46"

Driver

10.5°

57°

190 g

1° Closed

460 cc

46"

Driver

12°

57°

190 g

1° Closed

460 cc

46"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

it is recommended to make the driver

at least 1” longer (46”+) to maintain a

distance!

Bore Type: M1 Face Height: 55 mm Breadth: 114 mm

ACER XF FAIRWAY WOODS & HYBRIDS

SWEETNESS HAS A NEW NAME

ACER XF FAIRWAY WOOD

ACER XF HYBRID

AMAZING PERFORMANCE, GREAT LOOKS AND COMPREHENSIVE SELECTION ADD UP TO AN UNBEATABLE PACKAGE Acer XF Fairway Woods

Acer XF Hybrids

Versatility in a great looking and even greater performing

Versatility is not exclusive to the matching XF fairways. With

fairway wood is just one word to describe the Acer XF. The

the entire Acer XF line, now you have freedom of choice to

semi-shallow pear shape will appeal to a wide array of players

carry only what one is comfortable playing with. By mixing

from beginners to professionals. Each XF fairway uses

and matching the stylish XF hybrids, you are not tied down by

our exclusive variable crown thickness for ultimate weight

what constitutes a “traditional” set make up providing you with

distribution, superior balance and unbelievable performance,

complete customization. Let’s face it some players are better

while the variable face thickness provides an incredible sound

fairway players than others or their weakness is using certain

and feel at impact.

irons. Hybrids are designed to bridge that gap. For instance a

The XF is also available in various lofts that give players

2 and 3 hybrid club may replace a 5 and 7-wood respectively,

options, including a 4-wood for players looking to consolidate

but the shorter length provides more confidence. The broader

clubs in their bag to make room for a more needed club to fill

shape of a hybrid enables increased forgiveness over a long or

a void and provide better course management skills. Plus the

even mid iron.

4 and 7-wood combination make great companions to the

higher lofted driver options.

to many golfers’ bags. They are equally attractive to the rest

This is why the XF hybrids will make a welcome addition

of the Acer XF woods, but in a traditional hybrid shape. Plus they offer the same variable crown and face technologies for improved performance and feel. CLASSIC SHAPE IN A MODERN DESIGN • classic pear shaped profile • CAD designed styling

WOOD-STYLE HYBRID • wide sole design • CAD designed styling

VARIABLE CROWN TECHNOLOGY • enhanced weight distribution • optimum trajectory

VARIABLE FACE THICKNESS • superior distance, even on mis-hits

COMPREHENSIVE SELECTION • available in hard to find #4 wood (RH only) • available in standard or draw (not shown) • draw version (not shown) available spring 2011

AVAILABLE IN STANDARD OR DRAW • one of the few hybrid series in the industry available in both standard and draw versions • draw version (not shown) available spring 2011

Acer XF Hybrid Available RH: #2, 3, 4, 5, 6 Available LH: #3, 4, 5 #IW-1286

Acer XF Fairway Wood Available RH: #3, 4, 5, 7 Available LH: #3, 5, 7 #M-1286

Club

Loft

Lie

Weight

Offset

Volume

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

16º

59.5º

235 g

-9 mm

113 cc

RC* 40"

15º

58º

210 g

Square

171 cc

43"

19º

60º

242 g

-10 mm

114 cc

39.5"

17º

58.5º

215 g

Square

163 cc

42.5"

22º

60.5º

249 g

-11 mm

115 cc

39"

19º

59º

220 g

Square

156 cc

42"

25º

61º

256 g

-12 mm

116 cc

38.5"

21º

59.5º

230 g

Square

154 cc

41"

28º

61.5º

263 g

-13 mm

117 cc

38"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

Bore Type: M2 Face Height (#3): 35 mm Breadth (#3): 86 mm

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

Draw versions of both Fairway Woods & Hybrids coming Spring 2011!

Hosel Bore: 0.370 in Face Height (#3): 34 mm Breadth (#3): 60 mm

ACER XF IRONS

IT DOESNâ&#x20AC;&#x2122;T GET B ACER XF PROFESSIONAL

ACER XF STANDARD

ACER XF HIGH TRAJECTORY

PRECISION DESIGNED FROM THE GROUND UP

The new Acer XF Irons were designed from scratch, using advanced computer-aided design (CAD) systems to ensure performance at the earliest stages. Our designers worked with the foundry to maximize cutting-edge manufacturing techniques and precisely specify dozens of factors including center-of-gravity, moment-of-inertia to such seemingly minor details such as leading edge radius. All this up-front work helps us produce the best clubs at the best prices.

BETTER THAN THIS THE SIZZLING NEW ACER XF IRONS BRING THE LATEST IN TECHNOLOGY TO EVERY TYPE OF PLAYER

The Acer XF is our latest generation of game-

WHICH ACER XF IRON IS RIGHT FOR YOU?

improvement irons to replace our ever-popular Acer XK line that was named Golf Digest’s 2009 Best Value iron. More chiseled than its predecessor to garner more of a dramatic appearance, we were able to push the center of gravity even deeper (1.4mm) and lower (0.2mm) for improved

XF High Trajectory has a wide sole & larger offset

performance. Another way to put it is the XF stands for extra forgiveness.

XF Standard has standard sole & offset

XF Pro has thinner sole and reduced offset

The Acer XF iron is the standard version, but

there will be two other offshoots available to create three distinct models for a wide variety of players from beginner to professional. The standard XF is designed to fit the broadest range of golfers with ample offset to help the player square up the face at impact enabling the player to hit both straight and solid shots as well as instill confidence in their game.

#I-3303a Acer XF Standard Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW Club

Loft

Lie

Weight

Offset

Bounce

21°

59.5°

242 g

8 mm

0°

RC* 39"

23.5°

60.6°

249 g

7.5 mm

0°

38.5"

26°

61.3°

256 g

7 mm

0°

38"

The non-glare topline has been beveled to provide a

29°

62°

263 g

6.8 mm

1°

37.5"

less chunky appear at address.

33°

62.5°

270 g

6.5 mm

2°

37"

37°

63.5°

277 g

6 mm

3°

36.5"

In addition to the standard XF, the higher

launching XF High Trajectory is designed for higher handicappers, and the compact, reduced offset XF Pro model for better players. All three models are available for both right and left handed golfers. Lastly, the grooves are designed to conform to the

41°

64.5°

284 g

5.5 mm

4°

36"

46°

65°

291 g

5 mm

5°

35.5"

51°

65°

291 g

4.8 mm

5°

35.5"

56°

65°

298 g

4.5 mm

12°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 83.5 mm #5 Sole Width: 17.5 mm

Rules of Golf.

XF High Trajectory has shallow face for higher trajectory and better forgiveness

XF Standard has standard face for standard CG & trajectory

XF Pro has more compact face to allow the better player to shape the ball

#I-3308 Acer XF HT Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW

#I-3307 Acer XF Professional Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW

Club

Loft

Lie

Weight

Offset

Bounce

RC*

Club

Loft

Lie

Weight

Offset

Bounce

22°

59.5°

243 g

8 mm

0°

39"

21°

60°

242 g

4.3 mm

1°

RC* 39"

24.5°

60.6°

250 g

7.5 mm

0°

38.5"

24°

60.5°

249 g

3.8 mm

2°

38.5"

27°

61.3°

257 g

7 mm

0°

38"

27°

61°

256 g

3.8 mm

3°

38"

30°

62°

264 g

6.8 mm

1°

37.5"

31°

61.5°

263 g

3.3 mm

4°

37.5"

34°

62.5°

271 g

6.5 mm

2°

37"

35°

62°

270 g

3.3 mm

5°

37"

38°

63.5°

278 g

6 mm

3°

36.5"

39°

62.5°

277 g

2.8 mm

6°

36.5"

42°

64.5°

285 g

5.5 mm

4°

36"

43°

63°

284 g

2.3 mm

7°

36"

46.5°

65°

291 g

5 mm

5°

35.5"

47°

63.5°

291 g

1.8 mm

8°

35.5"

51°

65°

291 g

4.8 mm

5°

35.5"

51°

63.5°

291 g

1.6 mm

10°

35.5"

56°

65°

298 g

4.5 mm

12°

35.5"

56°

64°

298 g

1.3 mm

14°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 82 mm #5 Sole Width: 24 mm

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 79 mm #5 Sole Width: 17 mm

ACER XDS INSIDER DRIVER & FAIRWAY WOODS

GET ON THE

INSIDE TRACK

TAKE YOUR SWING INSIDE FOR LONGER DISTANCE AND GREATER ACCURACY

ACER XDS TITANIUM DRIVER

ACER XDS FAIRWAY WOOD

A Closed Face That Doesn’t Look Closed The Acer XDS Insider is uniquely masked so that the head appears square at address so the golfer can take his/her normal swing, even though it’s closed to help reduce fades and slices.

#1 HOW AN INSIDE-OUT SWING CREATES MORE DISTANCE One of the most common tendencies is when a golfer comes over the top and makes an outsidein move. This is evident by most shots off the tee resulting into a push, fade or the dreaded slice. A Golf Digest article “Add 42 Yards Now” explained that if you were able to change to more of an inside-out movement a golfer who swung 95 mph could gain as much as 42 yards. But through creating design features in the club head, the golfer can be encouraged to make more of an inside path. The Acer XDS Insider does precisely that. The profile of the head as well as the contour on the crown was specifically designed to create a mental picture of swinging from the inside. This will encourage one to swing the driver on an inside-out swing path instead of that dreaded distance robbing over-the-top move. The XDS Insider also helps you in two other ways. By adding internal weighting within the head in the heel area, this creates draw spin on center shots. The other method in creating a “draw bias” is the unique asymmetrical sole. More weight is shifted toward the heel in order to assist in rotating the head and squaring the face at impact. The face angle is a little more closed than normal to provide some additional corrective measures. In many cases when a golfer sees a closed club face they are not even aware they are manipulating

Goal: Get Into the Slot An inside-out swing is the most effective swing you can make. The majority of very good players employ an inside-out downswing, or what is commonly called “getting into the slot.” On the contrary, a high percentage of mid and high handicappers use an outside-in swing, which leads to slices and loss of power.

the club face or their stance open and essentially negating the potential benefit of the clubface being closed. The Acer XDS Insider’s addressed this problem as the face angle is cleverly disguised by the masking on the crown to provide a “square” appearance so they can just trust their natural swing.

#2 HOW THE ACER XDS INSIDER HELPS YOU PRODUCE THE INSIDE-OUT SWING The Acer XDS Insider Driver boasts a variable

Acer XDS Insider Fairway Woods feature three

face thickness, cup face design to make the entire

more technologies you can’t see to help your game:

club face become one gigantic sweet spot and

variable thickness face, variable crown technology

ensure that you get all the distance possible.

and internal weighting. The shallow face design and 4 way radius sole reduces contact with the turf for any course condition making this series one, if not, the most user-friendly fairway woods on the market today geared for the average golfer.

Visual Cues to Help Guide You The crown on the Acer XDS Insider is designed as a reminder to swing inside-out to create the most powerful and effective swings.

Acer XDS Insider Titanium Driver Available RH: #10.5°, 12° Available LH: #10.5° #TCM-1235

“Golf is a game that is played on a five-inch course - the distance between your ears.” - Bobby Jones

Acer XDS Insider Fairway Wood Available RH: #3, 5, 7 Available LH: #3, 5 #M-1235

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Club

Loft

Lie

Weight

Face Angle

Volume

Driver

10.5°

58°

200 g

1.5° Closed

460 cc

45"

16°

58°

210 g

1° Closed

165 cc

43"

Driver

12°

58°

200 g

1.5° Closed

460 cc

45"

19°

58.5°

220 g

0.5° Closed

155 cc

42"

22°

59°

230 g

Square

146 cc

41"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 56 mm Breadth: 116 mm

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

RC*

Bore Type: M2 Face Height (#3): 34 mm Breadth (#3): 87 mm

IT’S NOT A DRIVER IT’S NOT A 3-WOOD

IT’S

HOW DOES THE THRIVER IMPROVE YOUR DRIVES?

ACER XDS INSIDER TITANIUM THRIVER

S A THRIVER WHAT IS A THRIVER, YOU SAY?

IT’S A FAIRWAY-SEEKING

DEMON

If you are missing fairways off the tee on a

than a normal driver to allow for a shorter, more

When a standard driver goes long but wrong

regular basis, then the Acer XDS Insider Thriver

controllable length that now has the proper

and your #3 wood doesn’t give you the distance

was designed for you. We took the best aspects

amount of club weight. Plus we placed this

you need, the Acer XDS Insider “Thriver” edition

of a driver and a 3-wood to create the best of

added weight in a strategic location to produce

is that one club you have been searching for.

both worlds.

an even higher MOI. Combine the higher loft

For instance, a driver is approximately 3 times

(14º) of a stronger lofted #3 fairway wood and

the size of a #3 wood but has a much higher

what you now have is the ultimate in control off

moment of inertia (MOI) making it more forgiving

of the tee.

on off-center shots. Plus you have a large

The head shape and contour on the crown

confidence-building, thin face that produces a

was specifically designed to encourage one to

spring-like effect right up to the legal limit for

swing the driver on an inside-out swing path.

more distance. On the other hand, a 3 wood is

Plus the XDS Insider’s internal weighting creates

more lofted and this cuts down on side spin for

a draw enhancing ball flight on center impact.

straighter shots, plus the shorter length enables

The masking on the crown using our exclusive

you to have more control.

Square Optical Alignment System, cleverly

Why not just cut down your driver? It would

disguises the closed face angle to provide a

be too light to effectively control. The Acer XDS

“square” appearance so one can just trust their

Insider Thriver club head weighs a full 10g more

natural swing.

The Weight and Loft of a 3-Wood Combined with the Size of a Driver Sure, a lot of golfers already play the 3-wood off the tee. But a 3-wood is about 3 times smaller than a driver, so you end up with less room for error and risk getting under the ball for the dreaded moonshot.

Acer XDS Insider Titanium THRIVER Available RH: #14° Available LH: #14° #TCM-1234 Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Driver

14°

58°

210 g

1° Closed

460 cc

44"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 56 mm Breadth: 116 mm

Where Would You Rather Be? The recommended clublength for standard men is 44”, one inch shorter than a standard driver and one inch longer than a standard #3 wood. This creates a club that is long, but accurate.

RESULTS

45”

NORMAL 3 WOOD SHORT & STRAIGHT

“Whew, it’s still going good even though I didn’t hit it perfectly!”

ACER XDS THRIVER LONG & STRAIGHT

“Oh no, I got under it again!”

ASSEMBLY LENGTH

43”

NORMAL DRIVER LONG AND WRONG

44”

* RC = recommended clublength

ACER XDS WIDE SOLE HYBRID

THE PLAYABILITY OF A FAIRWAY WOOD THE ACCURACY OF AN IRON

If you thought hybrids were easy to hit, the

This hybrid design is enhanced by the

Acer XDS Wide Sole Hybrid series will blow

rails on the sole to help you power through

your mind.

the grass and prevent ‘digging’ at impact

We begin with our lower lofted models

for that solid contact with the ball. With the

which are designed for more distance.

club face well forward of the hosel, not only

Club

Loft

Lie

Weight

Offset

Volume

RC*

16°

57°

230 g

-8 mm

176 cc

40.5"

19°

58°

237 g

-10 mm

168 cc

40"

22°

59°

244 g

-12 mm

160 cc

39.5"

These are the same sizes as a normal fairway

will this prevent the possibility of shanking

25°

60°

251 g

-14 mm

152 cc

39"

wood providing not only much needed

the ball, but you will be able to hit that high

28°

61°

258 g

-16 mm

144 cc

38.5"

accuracy but confidence too compared

arching shot that you’ve always dreamed of

32°

61.5°

265 g

-18 mm

136 cc

38"

36°

62°

272 g

-19 mm

128 cc

37.5"

to those namby-pamby sized hybrids you

hitting. The Acer ‘Wide Sole’ Hybrids are built

#7 #8

40°

63°

279 g

-20 mm

120 cc

37"

might have tried. But as the loft of each head

to standard iron lengths providing you with

45°

63°

286 g

-21 mm

112 cc

36.5"

increases and less help is usually needed,

additional control and accuracy.

50°

64°

293 g

-21 mm

104 cc

36"

55°

64°

300 g

-21 mm

96 cc

36"

this set gradually decreases the size of the head.

Acer XDS Wide Sole Hybrid Available RH: #1-9, PW, SW #I-230

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

Hosel Bore: 0.370 in Face Height (#3): 34 mm Breadth (#3): 70.5 mm

ACER XDS CABRIOLET IRON

WE TOOK THE TOP DOWN SO YOU CAN ENJOY THE RIDE INTRODUCING QUITE POSSIBLY THE WIDEST SOLE IRON EVER CREATED

Transitional Technology Comparing the face of the 3-iron (top) vs. the 9-iron shows how the set transitions from shallow-face/ low-COG to a more traditional profile.

IS WIDER REALLY BETTER?

For nearly a decade golfers worldwide got their kicks out of the superb performance of the Acer XDS Wide Sole series by experiencing first hand the benefit that a wide sole iron can provide. The Acer XDS Cabriolet takes that same concept and combines it with the benefits of the modern hybrid.

For the majority of beginning golfers

and higher handicappers, the answer is a

Acer XDS Cabriolet Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW #I-252A

resounding YES! Most beginning golfers try to sweep or pick the ball off of the ground to make the ball get up in the air and end

Club

Loft

Lie

Weight

Offset

Bounce

RC*

up hitting the ball “fat”. The wider soled

21°

60°

242 g

4.8 mm

0°

39"

clubs simply help the club head glide along

24°

60.5°

249 g

4.3 mm

0°

38.5"

chassis of a hybrid. But we removed the heavy

27°

61°

256 g

3.8 mm

0°

38"

30°

61.5°

263 g

2.8 mm

1°

37.5"

crown or top and placed all that weight in the

33.5°

62.5°

270 g

1.8 mm

2°

37"

37°

63.5°

277 g

1.3 mm

3°

36.5"

41°

64°

284 g

1.3 mm

4°

36"

45°

64.5°

291 g

1.3 mm

5°

35.5"

50°

64.5°

291 g

0.8 mm

7°

35.5"

56°

64.5°

298 g

0.8 mm

10°

35.5"

The Acer XDS Cabriolet starts out with the

extra wide sole. This gets the ball up quickly and easily creating the best of both worlds; an iron appearance with hybrid accuracy! The progressive sole width (wider in the longer irons and gradually reducing in size in the scoring irons) provides the

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370””

the ground and into the ball so your shots are more solid.

In addition, the wider sole moves the

center of gravity lower on the clubhead, so that shots get up faster and fly higher, for more satisfying results.

#5 Blade Length: 84mm #5 Sole Width: 48mm

proper amount of relief where it benefits the most. If you are a beginner and need all the confidence and forgiveness possible to get you started, the Acer XDS Cabriolet’s are the perfect choice. The wider sole of the XDS Cabriolet Irons reduces digging and deceleration for better contact and a low center of gravity for higher trajectory.

ACER XDS REACT IRON

SNIPER ACCURACY

BEHEMOTH DISTANCE 16

The Acer XDS React Iron blends precision accuracy, superior distance, and solid feel to create the most forgiving iron you’ve ever played. Who says an advanced game-improvement model can’t look conventional? Not us! One look for yourself and you will see the Acer XDS React iron has a multitude of features that will attract a wide array of players. First we started out with a generous face area to instill confidence at address. The XDS React has an increased cambered sole radius accounting for a variety of turf conditions regardless if one is a digger or sweeper. Plus we offered just enough offset and a thinner top

TECHNOLOGY YOU CAN SEE... AND FEEL

line that provide less of a “chunky” appearance than most game improvement irons on the market today.

New advances in manufacturing have allowed

So on one hand the Acer XDS iron may look conventional but shrouded within the ultra-

us to expand the cavity to its limits for even

deep, asymmetrical multi-tiered cavity area fuels its extraordinary performance. Using new

better forgiveness and performance.

tooling techniques not available even as little as a year ago, we were able to carve out more material and redistribute it in the most optimum position. So much in fact, you can see where the extra weight is located. Not only will you have precision accuracy and unbelievably solid feel at impact, but the Acer XDS React irons are sneaky long too. If you are serious about your game, the Acer XDS React is one serious iron that just happens to be a lot of fun to hit! Conforms with USGA rules.

DEEP ASYMMETRICAL CAVITY • deeper, larger, wider cavity for superior forgiveness LARGER FACE • more confidence at address WIDE SOLE AND INCREASED SOLE RADIUS • solid feel and optimum trajectory

Acer XDS React Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW #I-3660b Club

Loft

Lie

Weight

Offset

Bounce

20°

59.25°

243 g

5.8 mm

0°

39"

23°

60°

250 g

5.5 mm

1°

38.5"

26°

60.75°

257 g

5 mm

2°

38"

29°

61.5°

263 g

4 mm

3°

37.5"

33°

62.75°

271 g

3 mm

4°

37"

37°

63°

278 g

3 mm

5°

36.5"

RC*

41°

63.75°

285 g

2 mm

6°

36"

45°

64.5°

291 g

2 mm

8°

35.5"

50°

64.5°

291 g

2 mm

9°

35.5"

55°

64.5°

298 g

1 mm

12°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370”

the Acer XDS React features a thinner and cleaner top line...

innovative new manufacturing methods allow us to distribute the weight in the most optimal positions

The green shaded area represents extra weight we were able to carve out using new tooling techniques, which is visibly displayed in the cavity

#5 Blade Length: 80mm #5 Sole Width: 24mm

while the sole remains thicker and wider for better forgiveness...

plus a large, confidence building face

ACER XK TITANIUM DRIVERS

JAW DROPPING DISTAN FIST PUMPING ACCUR ACER XK TITANIUM DRAW ACER XK TITANIUM STANDARD

SOLID DISTANCE AND DEADLY ACCURACY ARE THE HALLMARKS OF THE ACER XK TITANIUM DRIVERS 18

NCE RACY

FOCUS ON

VARIABLE FACE TECHNOLOGY

The Acer XK drivers are loaded with features to improve the game of a wide range of players. First we focused on the face technology by offering a variable face thickness, cup-face design. While it is easy to provide for the maximum allowable performance on center shots, the difference of a premium club is the ability to provide near perfect results with less than perfect shots. The cup-face moves the welds away from the corners of the head to provide a thinner, more active face to maximize ball speed on the off-center shots. The variable face thickness further reduces the wall thickness around the perimeter of the impact area so the entire club face becomes a gigantic sweet spot. Now off-center or miss hits will launch the ball directly down the fairway like you perfectly struck the ball in the center of the face. The shape of the head was carefully selected to appeal to the eye of a wide

In the early days of investment casting metal woods, it was typical that the center of the face was made slightly thicker than the perimeter areas to reinforce the clubface reducing the possibility of breakage. Those manufacturing issues have long been resolved, but the concept of creating a variable face thickness, which is incorporated into several manufacturers’ club head designs, is now done for another reason. Several years ago the USGA put a limit on the coefficient of restitution on clubs, primarily drivers. Testing for CT (characteristic time) has typically been conducted in only one place on the face – its center. It is very easy to achieve the maximum spring-like effect at the center of the face on a modern driver, but there is generally a large drop off in ball velocity the further the ball is struck off-center. By maintaining the thickness at the “sweet spot”, but reducing the thickness outside that area comes closer to providing near perfect results with less than perfect shots as the entire face becomes more active. This concept not only works in drivers, but other clubs as well. One by-product of the variable face in a stainless steel club head is a crisper sound at impact found with clubs using specialized materials as opposed to the muted sound of a head with uniform thicknesses. Heads featuring the Variable Face Thickness are the Acer XF fairways and hybrids, Acer XDS Insider drivers and fairways, Acer XK drivers, fairways and hybrids, Power Play Adrenaline drivers and fairways and Dynacraft Prophet ICT fairways and hybrids.

range of golfers, yet improve stability by expanding the front-to-back dimension. The center of gravity moves lower and further from the face to optimize launch conditions. The Acer XK Drivers are not only available in a multitude of loft angles, but hosel positions to meet all your custom fitting needs. There is the standard straight neck version as well as the Draw (slice-reducing) version, which incorporates a generous

STANDARD FORGED TITANIUM FACE

ACER XK VARIABLE THICKNESS CUP FACE

The variable thickness cup-face of the Acer XK Titanium Driver creates maximum rebound on the entire face, not just in the middle.

offset hosel - a larger offset than what is found on many of today’s most popular offset models. This helps to further assist squaring up the clubface without having to resort to a severely closed face angle.

DRAW TECHNOLOGY

Acer XK Titanium Driver Available RH: 9.5°, 10.5°, 12°, 14° Available LH: 10.5°, 12° #TCM-1081

How does it work?

Club

Loft

Lie

Weight

Face Angle

Volume

Driver

9.5°

58°

200 g

Square

460 cc

RC* 45"

Driver

10.5°

58°

200 g

0.5° Closed

460 cc

45"

Driver

12°

58°

200 g

1° Closed

460 cc

45"

Driver

14°

58°

200 g

1° Closed

460 cc

45"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 57 mm Breadth: 117 mm

Acer XK Draw Titanium Driver Available RH: 10.5°, 12° Available LH: 10.5°, 12° #TCM-1081OS Club

Loft

Lie

Weight

Face Angle

Volume

Driver

10.5°

58°

200 g

0.5° Closed

460 cc

45"

Driver

12°

58°

200 g

1° Closed

460 cc

45"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Offset hosel technology is fairly simple. By shifting the hosel forward, the center of gravity gets moved back further behind the shaft’s axis. Why does this help? The further behind the center of gravity becomes, the greater the tendency to close the face, thus reducing the likelihood of an open face at impact. Why don’t you see offset hosels more? Cosmetics are often one factor. An offset hosel appears unusual compared to a standard hosel. Plus the offset hosel is just one tool in a designer’s repertoire to help those who may push, fade or slice the ball. In terms of effectiveness, a closed face is very effective at changing the ball flight. The other option is shifting the weight distribution with in the head. However, designers can only shift so much weight in today’s larger heads, plus golfers generally don’t like the look of a severely closed face. A balanced combination of all three, like what we did in the Acer XK Draw, creates the best possible cure. Offset drivers (and fairway woods) are another option that can help assist golfers the same as those who rely on offset irons to straighten out their game.

RC*

Bore Type: M1 Face Height: 57 mm Breadth: 117 mm

An offset hosel (right) shifts weight further behind to help the face close at impact

ACER XK FAIRWAY WOODS & HYBRID

WHEN IT’S ALL ON THE LINE

ACER XK FAIRWAY STANDARD ACER XK FAIRWAY DRAW ACER XK HYBRID

Don’t mistake the Acer XK fairway woods for any ordinary stainless steel fairway wood. The ultra-wide profile, thin crown and variable face thickness make these high performance clubs capable of producing a high launching ball flight with incredible accuracy. There are two versions in the Acer XK fairway series. The standard straight neck version offers additional lofts to suit a player’s individual needs from a strong lofted 3-wood for players who have no problem getting the ball airborne to a high-lofted 9-wood not often found. A welcome addition is a 4-wood for those players wanting one fairway wood in their bag so they can add an extra wedge or hybrid and stay within the 14 club maximum to ladies or seniors looking for a complementary fairway for a high-lofted driver. The Draw version features an offset hosel to assist those golfers who suffer with slicing or severely pushing the ball from the fairway and in the rough. Not to be outshined, the Acer XK hybrids offer some of the same high performance features of the fairways, but in a compact version. With so much more weight allocated in its extra thick sole delivers that rock solid stability, incredible crisp feel and towering trajectory to hold greens better than that garden tool of an iron your were thinking about carrying.

What is

VARIABLE CROWN TECHNOLOGY?

XK FAIRWAYS & HYBRIDS FEATURE CUTTING EDGE TECHNOLOGY FOR GREATER PERFORMANCE

When it comes to being serious about club head design, our designers look at every possible way to save material that can be utilized better elsewhere. One area that manufacturers have explored is the

Acer XK Fairway Wood Available RH: #3+, 3, 4, 5, 7, 9 Available LH: #3, 5, 7 #M-1080 Club

Loft

Lie

#3+

13°

15°

17°

58.5°

crown or the top of the club head such as titanium drivers which are already very thin and lightweight. But no one had addressed stainless steel fairway

Weight

Face Angle

Volume

RC*

58°

210 g

0.5° Open

163 cc

43"

woods and hybrids which feature much thicker and

58°

210 g

Square

160 cc

43"

heavier crowns – at least until now.

215 g

Square

152 cc

42.5"

19°

59°

220 g

Square

145 cc

42"

Using our exclusive Variable Crown Technology

22°

59.5°

230 g

Square

140 cc

41"

(VCT), the crowns on stainless steel fairways and

25°

60°

235 g

Square

135 cc

40.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

Bore Type: M2 Face Height (#3): 36 mm Breadth (#3): 90 mm

hybrids are cast as little as 0.5mm thick in certain non-stress areas of the crown. To put that in perspective, that is equivalent to the thickness of 5 sheets of paper! Reinforcement ribs are left for more than adequate strength, while the VCT allows for the unwanted weight to be repositioned deep within the head. The results are club heads that are easy to get the ball airborne not to mention straight because

Acer XK Draw Fairway Wood Available RH: #3, 5, 7 Available LH: #3, 5 #M-1080OS Club

Loft

Lie

Weight

of the higher moment of inertia that is obtainable. Heads featuring the Variable Crown Technology are the Acer XF fairways and hybrids, Acer XDS

Face Angle

Volume

RC*

Insider fairways, Acer XK fairways and hybrids,

15°

58°

210 g

Square

160 cc

43"

19°

59°

220 g

Square

145 cc

42"

Power Play Adrenaline fairways, Power Play Caiman

22°

59.5°

230 g

Square

140 cc

41"

fairways and hybrids and Dynacraft Prophet ICT

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

Bore Type: M2 Face Height (#3): 36 mm Breadth (#3): 90 mm

fairways and hybrids.

Acer XK Hybrid Available RH: #3, 4, 5 Available LH: #3, 4, 5 #IW-1080 Club

Loft

Lie

Weight

Offset

Volume

RC*

19°

60°

242 g

-5.5 mm

110 cc

39.5"

22°

61°

249 g

-6.5 mm

105 cc

39"

25°

62°

256 g

-7.5 mm

100 cc

38.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

* RC = recommended clublength

Hosel Bore: 0.370 in Face Height (#3): 34 mm Breadth (#3): 60 mm

Weight has been shaved from the unnecessary areas of the crown, allowing the weight to be redistributed to areas where it’s need most

ACER XK TI-CEPTIONAL IRON

IT’S NOT JUST EXCEPTIONAL

IT’S TI-CEPTIONAL

THIN FACE TITANIUM CREATES HOTTER FACE AND GREATER FORGIVENESS If you thought our standard Acer XK

the face to be saved, you would be badly

irons were easy to hit, well you haven’t

mistaken. Simply substituting titanium where

experienced anything yet.

the stainless steel face resided, we shed

We didn’t just push the design envelope

45% or a total of 25g of weight from the

further we sent it packing by replacing that

face. All this weight was then put to much

boring stainless steel face with a thin sheet

better use by placing it in the toe and in the

Club

Loft

Lie

Weight

Offset

Bounce

of lightweight titanium to experience the

sole to help stabilize the head even more so

20°

59.5°

242 g

8 mm

-1°

39"

same benefits of a modern titanium driver

on an off-center shot.

22.5°

60.6°

249 g

7.5 mm

-0.5°

38.5"

25°

61.3°

256 g

7 mm

0°

38"

28°

62°

263 g

6.8 mm

1°

37.5"

RC*

wrapped up into an iron.

Now imagine your same old swing

32°

62.5°

270 g

6.5 mm

2°

37"

Why titanium? First it provides a

rejuvenated by producing greater distance

36°

63.5°

277 g

6 mm

3°

36.5"

responsive striking zone to increase ball

with no additional effort, in addition to

40°

64.5°

284 g

5.5 mm

4°

36"

45°

65°

291 g

5 mm

5°

35.5"

speed and distance. Secondly it allows for

creating a higher ball flight, more spin to hold

55°

65°

298 g

4.5 mm

12°

35.5"

an extraordinary source of weight savings

the greens and with pinpoint accuracy. You

that can be used to create unparalleled

can have it all with the Acer XK Ti-Ceptional

forgiveness for laser-like accuracy.

irons.

If you don’t think there is some weight in

THIN FACE TITANIUM TECHNOLOGY A CLOSER LOOK

HOTTER FACE AND GREATER PERIMETER WEIGHTING The lighter titanium face is encompassed by the heavier stainless body to provide more weighting around the perimeter and towards the back. This creates greater forgiveness on mis-hits. In addition, titanium face is stronger, allowing it to be made thinner than stainless steel. Thinner face equals greater rebound for increased distance.

Acer XK Ti-Ceptional Iron Available RH: #3-9, PW, SW #TI-3301A

Face: Titanium Body: 431 Stainless Steel Shafting Depth: 28 mm Hosel Bore: 0.370 in

Ferrule: Required #5 Blade Length: 84 mm #5 Sole Width: 20.2 mm

ACER XK IRONS

THE BEST VALUE IN GOLF

#I-3301 Acer XK Standard Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW Club

Loft

Lie

Weight

Offset

Bounce

21°

59.5°

242 g

8 mm

-1°

RC* 39"

23.5°

60.6°

249 g

7.5 mm

-0.5°

38.5"

26°

61.3°

256 g

7 mm

0°

38"

29°

62°

263 g

6.8 mm

1°

37.5"

33°

62.5°

270 g

6.5 mm

2°

37"

37°

63.5°

277 g

6 mm

3°

36.5"

41°

64.5°

284 g

5.5 mm

4°

36"

46°

65°

291 g

5 mm

5°

35.5"

51°

65°

291 g

4.8 mm

6°

35.5"

56°

65°

298 g

4.5 mm

12°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 84 mm #5 Sole Width: 16.8 mm

#I-3451 Acer XK Professional Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW Club

Loft

Lie

Weight

Offset

Bounce

The Acer XK Irons continue a long tradition of high performance Acer irons. These irons were meticulously crafted

21°

60°

242 g

4.3 mm

2°

39"

to ensure performance and playability for golfers of all levels. We utilized sophisticated CAD (computer aided design)

24°

60.5°

249 g

3.8 mm

2°

38.5"

27°

61°

256 g

3.8 mm

2°

38"

31°

61.5°

263 g

3.3 mm

2°

37.5"

to produce exacting ball flight for specific skill levels. This covers the gamut from professional and highly skilled

35°

62°

270 g

3.3 mm

3°

37"

amateurs (Pro), to the everyday golfer (Standard) to ladies, seniors or beginning players (HT). Several cosmetic

39°

62.5°

277 g

2.8 mm

4°

36.5"

software to create three distinct models. Each model optimizes the weight distribution and center of gravity location

RC*

43°

63°

284 g

2.3 mm

6°

36"

47°

63.5°

291 g

1.8 mm

8°

35.5"

the highest levels. No matter your skill, there is an XK iron for you. Listed “Best Value Irons” In Golf Digest 2009 Hot

51°

63.5°

291 g

1.6 mm

12°

35.5"

List Issue!

56°

64°

298 g

1.3 mm

15°

35.5"

details were added to further augment the performance enhancements to ensure that these clubheads perform at

For the Majority of Golfers

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 78 mm #5 Sole Width: 18.1 mm

Acer XK Standard The Acer XK standard was created to fit the widest range of players. From the non-glare topline to the generous offsets, the XK Standard allows today’s players to hit both solid and straight shots for the

#I-3461 Acer XK HT Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW Club

Loft

Lie

Weight

Offset

Bounce

ultimate confidence in their game.

22°

59.5°

243 g

8.5 mm

-1°

39"

I-3301

24.5°

60.6°

250 g

8 mm

-0.5°

38.5"

27°

61.3°

257 g

7.5 mm

0°

38"

30°

62°

264 g

7.3 mm

1°

37.5"

34°

62.5°

271 g

7 mm

2°

37"

38°

63.5°

278 g

6.5 mm

3°

36.5"

For Better Players

Acer XK Professional The XK Pro model features all the important details a better golfer covets in a modern day iron: reduced

RC*

42°

64.5°

285 g

6 mm

4°

36"

47°

65°

291 g

5.5 mm

5°

35.5"

51°

65°

291 g

5.3 mm

6°

35.5"

56°

65°

298 g

5 mm

12°

35.5"

offset, more compact blade length, beveled sole and thinner topline. Superior workability while still retaining game-improvement qualities.

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 83 mm #5 Sole Width: 25.1 mm

I-3451

For Mid to High Handicappers and Women Golfers

Acer XK HT (High Trajectory) Acer XK Ladies HT Designed for mid to higher handicappers and slower swing players. A 30% wider sole than the standard Acer XK model coupled with additional loft and deeper center of gravity gets the ball up in the air quickly from virtually any lie. HT iron features royal blue accent colors, while Ladies HT features baby blue accent colors. I-3461

Acer XK HT

#I-3461W Acer XK HT Ladies Iron Available RH: #4-9, PW, AW, SW Club

Loft

Lie

Weight

Offset

Bounce

RC*

24.5°

60.6°

250 g

8 mm

-0.5°

37.5"

27°

61.3°

257 g

7.5 mm

0°

37"

30°

62°

264 g

7.3 mm

1°

36.5"

34°

62.5°

271 g

7 mm

2°

36"

38°

63.5°

278 g

6.5 mm

3°

35.5"

42°

64.5°

285 g

6 mm

4°

35"

47°

65°

291 g

5.5 mm

5°

34.5"

51°

65°

291 g

5.3 mm

6°

34.5"

56°

65°

298 g

5 mm

12°

34.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 83 mm #5 Sole Width: 25.1 mm

I-3361W Acer XK Ladies HT * RC = recommended clublength

FASTER

ITâ&#x20AC;&#x2122;S SIMPLE PHYSICS. LESS DRAG MEANS FASTER CLUBHEAD SPEED EQUALS LONGER DISTANCE.

WIND-TUNNEL OPTIMIZED The Power Play System Q Adrenaline went through several iterations in wind-tunnel tests to help us create the most streamlined profile.

ACTUAL WIND-TUNNEL FOOTAGE

NON-OPTIMIZED PROFILE In a non-optimized profile, the airflow breaks apart quickly, creating a large amount of drag and reducing clubhead speed.

POWER PLAY SYSTEM Q ADRENALINE In the Power Play System Q Adrenaline, the airflow stays close to the surface through the head, minimizing drag and maximizing clubhead speed.

POWER PLAY SYSTEM Q ADRENLINE DRIVER

REQUALSLONGER Looking for an adrenaline rush off the tee by

PLASMA WELDED

driving the club faster and the ball further than

There is one other piece of technology that sets

ever before? Of course you are! The all-new

this club apart and that is how it is constructed.

Power Play System Q Adrenaline driver will fuel

There are two methods of welding titanium pieces

that rush as it will be our most advanced driver to

together. In the construction of a traditional

date utilizing two of the latest technologies. Let’s

4-piece forged titanium head, the pieces are

start out by first explaining what you can see.

permanently joined together by gas tungsten arc welding (GTAW) or also known as tungsten inert

Slipstream technology

gas (TIG) welding. Plasma Arc Welding (PAW)

The bold looking, unique shape was

is an improvement over GTAW by providing a

aerodynamically designed for less drag or air

cleaner, more efficient weld that requires less

resistance. The rounded edges and sculpted

solder and prevents uneven welds that create

body allow air to flow around the clubhead with

weak spots from over-polishing.

the least amount of resistance resulting into

In addition, plasma welding can help eliminate

players increasing their swing speed with the

up to 7g of weight in a 460cc titanium driver.

same amount of effort.

When manufacturers are looking for every

To begin, we had a wind tunnel especially

possible gram of weight to utilize elsewhere, 7g

built for us in order to study the aerodynamics

is like the winning the lottery. What this does is

of various shaped drivers. We were looking for

allow all of this added weight to be repositioned

smoke that had good attachment to the body and

deep within the Power Play System Q Adrenaline

once the smoke waves passed the rear of the

driver so one can hit the ball longer and straighter.

club they would converge and continue on their

The result is the same high performance but at

original path. Once we found certain features that

a fraction of the cost of the more expensive cast

seemed to allow air flow to pass more efficiently

titanium heads on the market.

PLASMA WELDED FOR STRONGER BONDS

Standard welding is messy and requires a lot more material to create a strong bond.

we began the process of piecing together our first prototype.

High Rebound Face

After a few more modifications and prototypes

Lastly, the Power Play System Q Adrenaline

were tested, the end result is the Power Play

driver is equipped with a variable face, cup face

System Q Adrenaline driver you see in front of

construction to increase the ball speed and

you.

distance even on off-center shots.

SLIPSTREAM TECHNOLOGY • wind-tunnel optimized aerodynamic shape • faster clubhead speed and greater distance

Power Play System Q Adrenaline Titanium Driver Available RH: 9.5°, 10.5°, 12° Available LH: 10.5° #TCM-1276

PLASMA WELDED • stronger, thinner welds allow for better weight distribution VARIABLE HIGH REBOUND FACE • superior distance, even on mis-hits

Club

Loft

Lie

Weight

Face Angle

Volume

Driver

9.5°

58°

200 g

1° Closed

460 cc

45"

Driver

10.5°

58°

200 g

1° Closed

460 cc

45"

Driver

12°

58°

200 g

1° Closed

460 cc

45"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Plasma welding is stronger and cleaner than standard welds. Using less material to weld means that mass can be repositioned elsewhere in the head for maximum effectiveness.

RC*

Bore Type: M1 Face Height: 58 mm Breadth: 117 mm

POWER PLAY SYSTEM Q ADRENLINE FAIRWAY WOOD

CUTS LIKE

UNIRAIL SOLE TECHNOLOGY GETS POWER PLAY SYSTEM Q ADRENALINE FAIRWAY WOOD

UNI-RAIL MULTIFUnCTIONAL

Keel Sole Design The uni-rail of the Power Play Adrenaline fairway wood and hybrid cuts through turf like the a keel of a boat.

Instant Relief The Power Play Adrenaline uni-rail can adjust for variable lie angles with no problems.

The Power Play System Q Adrenaline Fairway Wood features the same aerodynamic profile as the driver

POWER PLAY SYSTEM Q ADRENALINE HYBRID

POWER PLAY SYSTEM Q ADRENLINE HYBRID

KNIFE

S THROUGH THE TOUGHEST STUFF Power Play System Q Adrenaline

but offset with stronger lofts to promote less

Fairway Wood

spin and more overall distance. These also

If you want to cut through the crap,

feature our progressive face thickness to

spinach, deep cabbage or what ever else you

expand the sweet spot, increase ball speed

may call it, let the Power Play Adrenaline’s

and produce that unbelievable sound and feel

uni-rail sole fairway woods plow right through

at impact.

it. As a matter of fact, the uni-rail is so

Peace out to bad lies forever…

versatile it is equally effective from the short Power Play Adrenaline Fairway Wood Available RH: #3, 5, 7 #M-1276

rough and fairway too. In addition, the unirail provides relief from virtually any lie and

UNI-RAIL DESIGN • cuts through the nastiest turf with ease • allows for variable lie adjustments

reduces surface contact from where ever you are hitting the ball from.

OPTIMIZED AERODYNAMIC SHAPE • faster clubhead speed for longer distances

Like our other high performance models, these have our variable crown technology to push weight ultra low to get the ball up easily,

PROGRESSIVE FACE THICKNESS • superior distance, even on mis-hits

Power Play System Q Adrenaline Hybrid

target. As with the original, the Adrenaline

Based upon our best selling hybrid

hybrid is available as a full set. Never hit a #1

of all time, the Power Play Adrenaline is

iron in your life? Now you can!

more than just a face lift, it is a complete

If you need only a single loft or a complete

makeover. What is new is a score line pattern

set, join the revolution of those who have

and grooves like an iron, improved weight

eschewed irons for the shape of the future.

distribution and a slightly larger size at

When regular irons can’t cut the mustard

address. Lastly, the addition of a unique uni-

anymore – the Power Play Adrenaline hybrid

rail sole is designed to efficiently get through

is there to the rescue.

the Adrenaline hybrids are easy to align, easy

IRON-STYLE HYBRID • smaller and more compact like an iron but with the ease of use of a hybrid

to hit, accurate and forgiving. But don’t forget about the ultra-low center of gravity over any conventional iron which makes it a cinch

AVAILABLE AS A FULL-SET • includes rare #1 & 2 iron!

for the ball gets up quickly and toward your

Lie

Weight

Face Angle

Volume

RC*

15º

58º

210 g

Square

148 cc

43"

18º

58.5º

220 g

Square

143 cc

42"

21º

59º

230 g

Square

138 cc

41"

Club

Loft

Lie

Weight

Offset

Volume

RC*

15º

60º

228 g

2 mm

88 cc

40.5"

18º

60.5º

235 g

1.5 mm

84 cc

40"

21º

61º

242 g

1 mm

83 cc

39.5"

24º

61.5º

249 g

0.5 mm

82 cc

39"

27º

62º

256 g

0 mm

82 cc

38.5"

30º

62.5º

263 g

-1 mm

80 cc

38"

34º

63º

270 g

-2 mm

79 cc

37.5"

38º

63.5º

277 g

-3 mm

78 cc

37"

42º

64º

284 g

-4 mm

77 cc

36.5"

47º

64º

291 g

-4 mm

76 cc

36"

52º

64º

298 g

-4 mm

75 cc

36"

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

Bore Type: M2 Face Height (#3): 34 mm Breadth (#3): 81.5 mm

Power Play System Q Adrenaline Hybrid Available RH: #1-9, PW, SW #IW-1276

UNI-RAIL DESIGN • cuts through the nastiest turf with ease • allows for variable lie adjustments

One of which is the hosel position ensures

Loft

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

any lie. However, a few things did not change.

Club

Hosel Bore: 0.370 in Face Height (#3): 32.5 mm Breadth (#3): 38 mm

The Power Play System Q Adrenaline Hybrids play just like irons, but better and easier. Available as a full set #1-SW!

THERE’S A NEW S

POWER PLAY SYSTEM Q ADRENLINE IRON

SHERIFF IN TOWN

AND IT’S TAKING NO PRISONERS

One word to describe the Power Play Adrenaline iron design is “sin-sational”. Its’ unique appearance is only equaled by its performance – the uncanny ability to provide additional power and keep your ball in play for eye-opening results. That’s the Power Play advantage! So when your adrenaline kicks in and you want to hit the ball hard, you want to do so without the fear of which direction the ball might go. Problem solved as the expanded

MULTI-BODY CONSTRUCTION MEANS MORE WEIGHT WHERE YOU NEED IT

sole combined with the Tri-Cavity weighting pushes perimeter weighting to their outermost limits. The large confidence-building face with the easy to align modest offset are additional assets designed to keep the ball on-line and toward your goal toward lower scores.

#I-3489A Power Play System Q Adrenaline Iron Available RH: #3-9, PW, AW, SW Club

Loft

Lie

Weight

Offset

Bounce

20°

59.25°

243 g

5.8 mm

0°

39"

23°

60°

250 g

5.5 mm

1°

38.5"

26°

60.25°

257 g

5 mm

2°

38"

29°

61.5°

263 g

4 mm

3°

37.5"

33°

62.25°

271 g

3 mm

4°

37"

37°

63°

278 g

3 mm

5°

36.5"

today. This type of construction is usually

41°

63.75°

285 g

2 mm

6°

36"

reserved for ultra-game improvement irons

45°

64.5°

291 g

2 mm

8°

35.5"

50°

64.5°

291 g

2 mm

9°

35.5"

55°

64.5°

298 g

1 mm

12°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

RC*

#5 Blade Length: 84.5 mm #5 Sole Width: 23.5 mm

The intricate shape of the Power Play Adrenaline iron required a two-piece construction not commonly found in irons

using multi-materials. Even though the Power Play Adrenaline iron consists wholly from stainless steel, a staggering 38% of the total weight of the iron resides in the rear flange making these exceptionally forgiving.

POWER PLAY CAIMAN TITANIUM DRIVER

UNLEASH THE BEAST “...this club is one of the best deals for a driver you’ll ever find and produces high moi and great ballflight.” Golf Tips Magazine 2009

What’s the most feared beast in all of South America? It is the Amazonian Black Caiman, which is exactly the

inspiration behind the unique geometric shaped driver. But this powerful black Caiman preys mostly on birdies and eagles and is fearless in devouring the competition on golf courses across the globe.

For the past few years, the Caiman has remained a top seller and a club

that receives rave reviews from a broad range of players and skill sets. The Caiman’s unique shape coupled with the internal weighting that was strategically located within the head is what gives this club head

Power Play Caiman Titanium Driver Available RH: 9.5°, 10.5°, 12° Available LH: 10.5° #TM-1005D Club

Loft

Lie

Weight

Face Angle

Volume

Driver

9.5°

59°

200 g

Square

460 cc

45"

Driver

10.5°

59°

200 g

0.5° Closed

460 cc

45"

Driver

12°

59°

200 g

0.5° Closed

460 cc

45"

excellent mass properties, extreme stability and exceptional raw distance off of the tee.

The lustrous black appearance is a Physical Vapor Deposition (PVD)

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 55 mm Breadth: 116 mm

coating, a process that involves the deposition of titanium carbon nitride under low vacuum conditions. But you don’t need a molecular physicist to tell you that it is really cool looking and extremely durable too.

* RC = recommended clublength

RC*

POWER PLAY CAIMAN RAWPOWER FAIRWAY WOOD

THERE’S POWER

THEN

THERE’S

RAWPOWER 3-WOOD DISTANCE MEETS 5-WOOD CONTROL

longest and straightest fairway of your life.

satisfactory results. Why? It’s that extra 1” longer

ingenuity in combining that same philosophy and

But here is the real key. Most golfers have no

length that makes it more difficult to return the club to

cutting edge technology to obtain maximum distance

problem hitting a 5-wood reasonably well, but when

the ball in a square impact position. With the Caiman

and forgiveness off the tee, into the ultimate fairway

they need extra distance they pull their 3-wood out

Rawpower, you get the best of both worlds: 5-wood

wood – the Caiman Raw Power Forged Fairway wood.

and all of the sudden they hit the club with less than

accuracy with 3-wood length. Note: For optimum

Our R&D department spared no expense and

First, we started out with a forged ultra-thin

effectiveness, the Caiman Rawpower is designed

maraging steel face insert to increase the ball speed

to be be built to the same length as a traditional

coming off of the face approaching the legal limit for

5-wood.

spring-like effect.

In addition to the “hot” face we elected to utilize

Power Play Caiman Rawpower Fairway Wood Available RH: #3 #FM-1005M

“cup face” technology. By significantly welding behind the perimeter of the face creates a greater trampoline effect over the entire hitting surface, resulting in greater distance even on off center hits. Combining the unique geometric shape, extra thick sole and internal weighting, we created the highest moment of inertia with a clubhead this size so you can hit the ball the

The Caiman Rawpower Fairway Wood shortens the clublength by 1” to give you greater control. Distance, however, is actually gained due to the unique clubhead design. The Caiman Rawpower not only gains greater distance than standard 3-woods, it lands more accurately. ** actual launch monitor data shown

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

15°

59°

218 g

Square

180 cc

42"

Face: Maraging Steel Body: Maraging Steel Hosel Bore: 0.335 in.

Bore Type: M2 Face Height: 35.5 mm Breadth: 84 mm

POWER PLAY CAIMAN FAIRWAY WOOD & HYBRID

DOUBLE THREAT EXTEND YOUR POWER GAME WITH CAIMAN FAIRWAY WOODS AND HYBRIDS

CAIMAN FAIRWAY WOOD

CAIMAN HYBRID

While at address you will see the same pleasing unique geometric shape as

The Caiman hybrid is a high performance option to replace those long, hard-to-hit

the matching Caiman driver, it is what you can’t see is what makes the Caiman

irons in your bag using the latest in technological know-how. The shape is truly

Fairway Woods special. These unique woods are engineered with a variable crown

unique, but it is what you don’t see that makes all the difference. The face is

thickness that measures as little as 0.5mm, which is the thickness of 5 sheets of

constructed of an active maraging face insert. This is quite possibly the hardest

paper! All the unwanted weight normally reserved for the crown was repositioned

and strongest material used in golf clubhead manufacturing and selection to provide

deep within the head. This provides you with a high launching ball flight with

longer distance than any hybrid you’ve ever used! Just like the matching stainless

incredible accuracy.

steel fairway woods, these possess a variable crown thickness as little as 0.5mm thick for higher launch and superior accuracy.

Available RH: #3, 5, 7 Available LH: #3, 5, 7 #M-1005 Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Club

Loft

Lie

Weight

Offset

Volume

16°

59°

210 g

Square

170 cc

43"

16°

59.5°

235 g

-5 mm

111 cc

40"

19°

59.5°

220 g

Square

155 cc

42"

19°

60°

242 g

-5 mm

107 cc

39.5"

22°

60°

230 g

Square

145 cc

41"

22°

60.5°

249 g

-6 mm

104 cc

39"

25°

61°

256 g

-6 mm

102 cc

38.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

Available RH: #2, 3, 4, 5 Available LH: #2, 3, 4, 5 #I-1005

Bore Type: M2 Face Height: 34.5 mm Breadth: 89 mm

Face: Maraging Steel Body: 431 Stainless Steel Face Angle: Square

RC*

Hosel Bore: 0.370 in Face Height (#3): 34 mm Breadth (#3): 61 mm

POWER PLAY CAIMAN RAWPOWER IRON

HARD ASSETS SUPER HARD MARAGING STEEL FACE GENERATES EXPLOSIVE DISTANCE

This powerful iron design has got some attitude and here is the reason

why. For starters the Caiman Raw Power irons are constructed differently

FOCUS ON

MARAGING STEEL

advantage out on the course, the outer shell of the Caiman iron head is precision cast to form the framework around a face plate of ultra-thin sheet of high strength 420 specialty maraging steel. This provides two things that an ordinary iron lacks; an explosive face for ball to thrust from and ability to expand the weight deeper and more rearward resulting in a driving trajectory with pinpoint accuracy.

The ultra-wide sole and massive rear center section not only creates

performance benefits, it gives the design the unique appearance you have come to expect from the Caiman line. Now you have the raw power to produce shots that you only dreamt of before.

MARAGING STEEL FACE The Power Play Caiman Iron uses an ultrahard maraging steel face, which is made thinner for superior rebound and distance.

Power Play Caiman Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW #I-3488 Club

Loft

Lie

Weight

Offset

Bounce

20°

59.25°

243 g

5.9 mm

0°

RC* 39"

23°

60°

250 g

5.6 mm

1°

38.5"

26°

60.75°

257 g

5.3 mm

2°

38"

29°

61.5°

264 g

5.0 mm

3°

37.5"

33°

62.75°

271 g

4.7 mm

4°

37"

37°

63°

278 g

4.4 mm

5°

36.5"

41°

63.75°

285 g

4.1 mm

6°

36"

45°

64.5°

291 g

3.8 mm

8°

35.5"

50°

64.5°

291 g

3.5 mm

9°

35.5"

56°

64.5°

298 g

3.2 mm

12°

35.5"

Face: 420 Maraging Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

#5 Blade Length: 82 mm #5 Sole Width: 30 mm

DEEP CENTER SOLE WEIGHTING The deep, rear center of gravity location creates a high moment of inertia for superior accuracy and feel.

Maraging steel used in the Power Play Caiman series are iron alloys known for their superior strength in the steel family. The name derives from the combination of Martensitic Aging. These alloys are extremely strong and can be produced into a very thin sheet as compared to normal stainless steel varieties for use in face inserts into fairway woods, hybrids and even irons. The purpose of utilizing thin maraging steel face inserts allow the face to flex to produce a high coefficient of restitution or rebound effect, just like the use of titanium in modern drivers as a way to increase the ball velocity coming off the face. In addition, there is a considerable weight savings that allows the golf club designer to place more weight elsewhere in the head to improve launch angles and reduce spin rates. Maraging steel is used in lieu of titanium because it is easily bonded (welded) to a stainless frame in fairway woods, hybrids and irons. A number of name brand golf manufacturers are currently using maraging steel in their premium performing golf clubs lines to increase performance but priced accordingly. A maraging face is usually a USD $30 add-on to any single fairway, hybrid or iron over the same design with a normal stainless face. The Caiman Raw Power fairway, hybrids and irons all feature maraging steel identical technological advantages found in the name brand clubs but at a fraction of the cost of the majors.

HARDER

from the same old irons you have used before. In order to give you an

MARAGING STEEL BETA TITANIUM 6AL-4V TITANIUM 17-4 STAINLESS STEEL 431 STAINLESS STEEL

SOFTER

CARBON STEEL 304 STAINLESS STEEL

POWER PLAY SYSTEM Q2 IRON

so good... WHICH TO CHOOSE?

IRON, WOOD-HYBRID OR IRON-HYBRID At no other time in the history of golf have players had more options when it comes to the equipment they play. Golf clubs can be expensive so it is wise to make an educated decision when it comes to purchasing equipment.

Why waste your hard earned money by

putting something in your bag that is not going to be used with any confidence? So here is a primer on the type of clubs used to tackle the intermediate to shorter distances to the green. Irons are the thin, elongated clubs designed to be hit off the ground.

Their narrow soles are better suited

it’s like making a deal with the devil

for golfers who tend to “hit down” on the ball or may prefer to open or close the face to manipulate the ball flight. Modern game-improvement irons are nearly as

What makes the Power Play System Q2 Iron so sinfully fun to play? The secret is

forgiving as hybrids and their offset hosel assist golfers

in the sole and rear cavity mass stabilizing bar. Enhanced perimeter weighting and

by squaring up the face upon impact. Very skilled golfers

wider, thicker sole focuses weight where it is needed for most golfers to experience

may still prefer a traditional 3 or 4-iron, but even on the

a higher ball flight, a more solid feel and with precision accuracy. Put some muscle

professional tours, many are switching to a hybrid.

between you and the ball and fire away in confidence.

Wood-Hybrids are built in many ways like a mini-metal wood, comprising of a wide sole and a hollow-bodied frame, more mass is pushed further away from the center of gravity making it the most forgiving of the three choices. These are shorter than a fairway wood for more control and solidness of contact and their shallow profile often creates a higher launch angle. Another advantage

advanced technology creates power and forgiveness

of a wood-hybrid is the wider sole, reducing “fat” shots. Iron-Woods are also known as a hybrid or a club comprising both wood and iron elements.

These

basically start out hollow-bodied irons as the face profile and appearance at address are similar to an iron. However the difference is a greater percentage of weight is shifted back away from the face to provide more

The dual-weight design of the Power Play System Q2 iron pushes the weight to the rear and bottom of the clubhead for higher moment of inertia and improved trajectory.

forgiveness on off-center shots. These also exhibit less offset than a traditional iron making it easier for some to align square to the target.

The split-sole design of the Power Play System Q2 iron moves the weight to the toe and heel, to provide power and momentum on off-center hits.

Power Play System Q2 Iron Available RH: #3-9, PW, AW, SW Available LH: #3-9, PW, SW #I-3486 Club

Loft

Lie

Weight

Offset

Bounce

20°

59.25°

243 g

5.8 mm

0°

39"

23°

60°

250 g

5.5 mm

1°

38.5"

26°

60.75°

257 g

5 mm

2°

38"

29°

61.5°

263 g

4 mm

3°

37.5"

33°

62.75°

271 g

3 mm

4°

37"

37°

63°

278 g

3 mm

5°

36.5"

41°

63.75°

285 g

2 mm

6°

36"

45°

64.5°

291 g

2 mm

8°

35.5"

50°

64.5°

291 g

2 mm

9°

35.5"

55°

64.5°

298 g

1 mm

12°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

RC*

#5 Blade Length: 79 mm #5 Sole Width: 19.8 mm

POWER PLAY SYSTEM Q HYBRID

POWER PLAY SELECT 5000 HYBRID

PUT THE SCREWS

THE ORIGINAL FULL-SET HYBRID

TO THE COMPETITION The “Tri-Port” weighting system creates a very deep, and we mean Grand Canyon

Are you among the many who struggle hitting a conventional

center of gravity deep to hit the ball higher and longer than irons of comparable

iron effectively? Well the answer to your problems may be the

lofts, while delivering exceptional control.

unconventional. Year after year the Power Play Select 5000

Each System Q hybrid comes equipped with three 6 gram screws. Additional

Hybrid has been one of our most popular line of clubs. The

weight screws may be purchased separately allowing you to configure the clubhead

reason is the innovative shape that makes it so easy to hit.

to either heavier of lighter swingweights or to accommodate for different length

options. Whether you need a single club to replace a long iron or a full set as an

weight below the equator of the ball, far more than a traditional

alternative to traditional irons, the System Q hybrid will allow you to put the screws

iron. The smooth sole design glides along the ground instead

to your competition.

of digging into it, plus the reduced offset makes it easier to

The compact size concentrates an unbelievable amount of

align. Add all these things together and this ensures that you get the ball up fast and directly toward your target.

Power Play System Q Hybrid Available RH: #2-9, PW, AW, SW Available LH: #2, 3, 4, 5 #I-358

3 Adjustable Weight Ports The System Q hybrid comes preconfigured with 6g screws in each port. Additional screws are available separately.

Club

Loft

Lie

Weight

Offset

Volume

RC*

Club

Loft

Lie

Weight

Offset

Volume

RC*

16°

60°

224 g

-3 mm

115 cc

41"

15°

60°

228 g

2 mm

75 cc

40.5"

19°

60°

231 g

-4.5 mm 110 cc

40.5"

18°

60.5°

235 g

1.5 mm

72 cc

40"

22°

61°

238 g

-5.5 mm 105 cc

40"

21°

61°

242 g

1 mm

72 cc

39.5"

25°

62°

245 g

-6.5 mm 100 cc

39.5"

24°

61.5°

249 g

0.5 mm

70 cc

39"

29°

62.5°

252 g

-7.5 mm

95 cc

39"

27°

62°

256 g

0 mm

70 cc

38.5"

33°

63°

259 g

-8.5mm

90 cc

38.5"

30°

62.5°

263 g

-1 mm

70 cc

38"

37°

63.5°

266 g

-9.5mm

90 cc

38"

34°

63°

270 g

-2 mm

70 cc

37.5"

41°

64°

273 g -10.5 mm 90 cc

37.5"

38°

64°

277 g

-3 mm

70 cc

37"

45°

64°

280 g -11.5 mm 90 cc

37"

42°

64°

284 g

-4 mm

70 cc

36.5"

50°

64°

287 g -12.5 mm 90 cc

36.5"

46°

65°

291 g

-4 mm

70 cc

36"

55°

64°

294 g -13.5 mm 90 cc

36"

52°

65°

298 g

-4 mm

70 cc

36"

Face: 17-4 Stainless Steel Body: 17-4 Stainless Steel Face Angle: 0.5° Closed (#2-5)

* RC = recommended clublength

Power Play Select 5000 Hybrid Available RH: #1-9, PW, SW Available LH: #1-9, PW, SW #I-94025

Face Angle: Square (6-SW) Hosel Bore: 0.370 in Face Height (#3): 34 mm Breadth (#3): 58.5 mm

Face: 17-4 Stainless Steel Body: 17-4 Stainless Steel Face Angle: Square

The Most Complete Hybrid Set in the Industry Never hit a #1 iron in your life? Well, now you can! Full sets are available for both right and left handed golfers making this the most versatile hybrid in golf today.

Hosel Bore: 0.370 in Face Height (#3): 36 mm Breadth (#3): 42.5 mm

DYNACRAFT PROPHET ICT SERIES

CHANGING THE WORLD, ONE DE CLASSIC PEAR SHAPE AND IMPROVED FITTING SYSTEM ALL WRAPPED UP INTO ONE The patent pending adjustable 8-position

game progresses or if you are simply looking

clubs on the market.

hosel defines the new Dynacraft Prophet ICT

for a change of new shaft technology, additional

The octagonal interchangeable hosel adapter

series (available on driver and fairway woods).

shafts and adapters (#ICTADAPTER) can be

will create eight distinct lie and face angle sets

Each hosel position provides differing lie angles

purchased. Imagine the possibilities of changing

of specifications from upright to flat to open to

and face angles, allowing you to optimize the

shafts quickly and efficiently without harming the

closed. Add this to the three different loft options

club to suit your swing tendencies. The hosel

shaft..

and the countless shafts on the market and you

is instantly adjustable, and changes can be

have an almost unlimited number of custom

made on-the-spot. The adjustable hosel is

Classic pear-shaped driver

not designed as a fitting tool (although it can

The new Dynacraft Prophet ICT driver offers

be used as one). Rather it is “Fit and Play”: a

complete customization with a Tour-preferred

Adjustable fairway woods

club you can be fit for on the spot and played

shape. No other club on the market is as diverse

The Dynacraft Prophet ICT series takes our

as the Prophet ICT driver. Not only do you have

revolutionary, patent pending interchangeable

the ability to change different shafts in seconds

hosel adapter to the fairway woods with the

with the tool supplied, but one can also fine-

same interchangeable Prophet ICT 8-position

immediately. As your

tune the angles to provide the best possible

fitting opportunities.

adapter. Each hosel insertion provides differing

combination to help improve accuracy on any

lie angles ranging from 2º upright to 2º flat

given day. This club can grow with the owner

and face angles that range from 2º open to 2º

instead of becoming obsolete like so many

closed, allowing you to optimize the club to suit your swing tendencies. Need a #3 fairway wood that can provide a draw on a certain hole and a #5 fairway wood that can create a cut for another? No problem. Purchase additional adapters (#ICTADAPTER) and you can interchange countless shafts on the market with an almost unlimited number of custom-fitting opportunities. The fairway woods feature the same

EGREE AT A TIME... shape and their compact size allows for some

combination with both the Prophet Tour and

degree of workability that most behemoth

CNC Forged irons. This creates a set of hybrids

geometric designs do not. Their variable face

and irons that can be perfectly matched for any

thickness provides for an incredible crisp sound

course condition. The Prophet ICT Hybrids are

and solid feel at impact.

assembled to the same length for predictable

Club

Loft

Lie

Weight

Face Angle

Volume

Driver

9.5°

Variable

200 g

Variable

405 cc

45"

distances to replace the #2-4 irons. These heads

Driver

10.5°

Variable

200 g

Variable

405 cc

45"

Matching hybrid stands on its own

also feature a four-way radius on the sole to

Driver

12°

Variable

200 g

Variable

405 cc

45"

The Dynacraft Prophet ICT Hybrids feature full

be hit from a variety of lies and turf conditions.

face progression. This characteristic, which is

Note: The Prophet ICT Hybrids do not have

found on fairway woods, is important for those

Adjustable Hosel Technology.

with a pull, draw or even hook flight pattern. The Prophet ICT is neutral biased so more accomplished players can confidently go after the ball without fear of hooking the ball. A substantial amount of time was spent modeling to strategically place weight deep elongated hosel length helps produce a more driving launch angle. We accomplished this

8 1

Bore Type: M1 Face Height: 55 mm Breadth: 106.5 mm

6 5

Club

Loft

Lie

Weight

Face Angle

Volume

15°

Variable

212 g

Variable

145 cc

43"

18°

Variable

222 g

Variable

137 cc

42"

21°

Variable

232 g

Variable

130 cc

41"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

3 4

RC*

Bore Type: M1 Face Height (#3): 34 mm Breadth (#3): 82 mm

Dynacraft Prophet ICT Hybrid Available RH: #2, 3, 4 #IW-1250

by incorporating our exclusive Variable Crown Technology to reduce needless weight in the crown area. Plus the Variable Face Technology provides a more active strike zone and incredible feel at impact.

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

RC*

Dynacraft Prophet ICT Fairway Wood with Adjustable Hosel Technology Available RH: #3, 5, 7 #MFX-1250

who hit the majority of hybrids on the market

within the head for added stability, yet the

Dynacraft Prophet ICT Titanium Driver with Adjustable Hosel Technology Available RH: 9.5°, 10.5°, 12° #TMFX-1250

align the dot with the position desired

The Prophet ICT hybrids possess a player inspired size and shape, are a perfect

Club

Loft

Lie

Weight

Offset

Volume

RC*

18°

59°

236 g

-11 mm

113 cc

39.5"

21°

59.5°

243 g

-11 mm

108 cc

39"

24°

60°

250 g

-11 mm

103 cc

38.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

Hosel Bore: 0.370 in Face Height (#3): 35 mm Breadth (#3): 59.5 mm

THIS LITTLE DEVICE CAN GIVE YOU 8-HEADS-IN-ONE POSITION 1

Creates Slight Pull Hit

POSITION 2

Creates Push or Fade Hit

POSITION 3

Creates Fade or Slice Hit

POSITION 4

HOOK

DRAW

Creates Push or Fade Hit

POSITION 5

Creates Slight Push Hit

POSITION 6

Creates Pull or Draw Hit

POSITION 7

Creates Draw or Hook Hit

8 6

STRAIGHT

FADE

4 15 2

SLICE

POSITION 8

Creates Pull or Draw Hit

diagram shown is for right handed golfer

DYNACRAFT PROPHET TOUR BLADES

SEXYBACK TIMES 2

PROPHET TOUR FORGED CNC

PROPHET TOUR IRON

Are you a player? You know the guy that shoots close to scratch or the hot shot with clubs that say “only God and I can hit these.” Not you? Well, don’t worry because few of us really can. But there is something about playing a set of sexy looking blade irons. Ask somebody who plays blades why and they will tell you that it allows them to work the ball to create different shots. But more importantly, on a perfectly struck shot, they will tell you there is no better feeling in the world. That’s because the weight is behind the ball, not spread out all over the place. I’ll let you in on a little secret. The Prophet Tour irons only looks like blades. Yeah, both have your compact blade length, thin top line, narrow sole and reduced offset, all the blah, blah, blah you come to expect from a blade. The biggest decision you may have to make is which one to choose.

HOW DO YOU MAKE A BLADE FORGIVING? Meet the Stability Slot This narrow cavity was created to move the weight slightly farther back to improve forgiveness without sacrificing workability. Ingeniously hidden so that a blade still looks like a blade should look, albeit in this case, a lot more awesome.

Hit the Ball Where You are Supposed to Our research indicated that the majority of blades did not have the center of gravity placed in the middle of the face, possibly due to the longer hosel design of traditional blades. We shorten the hosel and shifted the COG to the center, where it should be.

THE SWEETEST BLADE WE’VE EVER CREATED, NOW AVAILABLE IN FORGED

A new concept in forged iron production techniques The typical forged iron has a shallow cavity, or in many cases, no cavity at all. However, through advanced CNC milling, we can now create undercut cavity back irons that are as forgiving as standard cast cavity backs, but with the soft feel of forged.

Rivaling the feel of a forging, the Prophet

The Dynacraft Prophet Tour Forged CNC

Tour irons are investment cast from an

starts out with an attention to detail creating

ultra-soft 304 stainless steel. We set out to

right shape, blade length, offset, and toe

create a blade that felt amazing, but was

radius that more accomplished golfers will

also forgiving. So we created this thing

find timeless. The forged ultra-soft carbon

we call a Stability Slot. This concept is

steel provides an unprecedented level of feel.

similar to how an undercut cavity works by

The most discriminating player have pride

moving a little weight back from the face.

of ownership from these flawless, chrome-

Don’t worry, you can still work the ball,

finished irons.

but the few bad shots you make will still

Many players’ blades today have a heel

be playable. Plus we shortened the hosel

biased, not to mention higher, center of gravity

removing that excess weight in the heel so

location requiring a player to hunt for the

you have even more weight behind the ball

sweet spot. One of the other things we set

to experience the purest feel of all.

out to accomplish was creating some game

Did we tell you it is sexy looking too?

enhancement features into a player’s blade.

It does because it has a luxurious and

One way of accomplishing this feat was to

durable black PVD finish too.

shorten the hosel area and take that weight

The Dynacraft Prophet Tour might just

and reposition it so that the center of gravity

be the start of a new category as a game

would be in the center of the score line area to

improvement blade proving that not all

reward a well struck shot.

blades are hard to hit.

Each groove is CNC milled to conform to

Start with a Billet The Dynacraft Prophet Tour Forged CNC Iron starts out as a single billet. The billet is heated then pressed into the rough shape using several tons of force.

Drop Forging Through each successive step, it begins to look more like a finished iron. The basic shape of the club head along with a separate hosel is then welded together.

the Rules of Golf.

Dynacraft Prophet Tour Blade Iron Available RH: #3-9, PW, SW Available LH: #3-9, PW, SW #I-3452C

Dynacraft Prophet Tour Forged CNC Iron Available RH: #3-9, PW, SW #FI-303512

Club

Loft

Lie

Weight

Offset

Bounce

RC*

Club

Loft

Lie

Weight

Offset

Bounce

21°

60°

242 g

4.3 mm

2°

39"

21°

59°

242 g

4.3 mm

0°

RC* 39"

24°

60.5°

249 g

3.8 mm

2°

38.5"

24°

59.5°

249 g

3.8 mm

1°

38.5"

27°

61°

256 g

3.8 mm

2°

38"

27°

60°

256 g

3.3 mm

2°

38"

31°

61.5°

263 g

3.3 mm

2°

37.5"

31°

60.5°

263 g

2.8 mm

3°

37.5"

35°

62°

270 g

3.3 mm

3°

37"

35°

61°

270 g

2.3 mm

4°

37"

39°

62.5°

277 g

2.8 mm

4°

36.5"

39°

61.5°

277 g

1.8 mm

5°

36.5"

43°

63°

284 g

2.3 mm

6°

36"

43°

62°

284 g

1.3 mm

6°

36"

47°

63.5°

291 g

1.8 mm

8°

35.5"

47°

62.5°

291 g

0.8 mm

8°

35.5"

56°

64°

298 g

1.3 mm

15°

35.5"

56°

63°

300 g

0.3 mm

12°

35.5"

Face: 304 stainless steel Body: 304 stainless steel Hosel Bore: 0.370 in.

#5 Blade Length: 78 mm #5 Sole Width: 16.8 mm

Face: 1021 carbon steel Body: 1021 carbon steel Hosel Bore: 0.370 in.

Mill the Cavity Advanced CNC milling for the Dynacraft Prophet Tour Forged CNC Iron allows for intricate undercut designs previously found only in cast clubheads

#5 Blade Length: 73mm #5 Sole Width: 19mm

After Milling All that’s left is the finishing of the clubhead

THE NEW SHAPE OF H

DYNACRAFT AVATAR XMOI HYBRID

HYBRID TECHNOLOGY THE DYNACRAFT XMOI HYBRIDS TRANSITION THROUGHOUT THE SET TO PROVIDE OPTIMAL PERFORMANCE FOR EACH CLUB

For the weekend warrior who wants

more typical hybrid appearance. That is

desperately to improve their game, this

they are a little wider and not quite as tall

set perfectly integrates all the necessary

allowing even less skilled players added

tools to help you achieve that goal. For

confidence with the ability to easily get the

instance, if you look inside the bag of the

ball airborne and increasing the solidness

typical golfer, they have a mish mash of

of contact.

clubs. They might have invested into a

The mid-irons progressively become

whole set of irons only to end up having

narrower as less game improvement is

some of those long irons sitting in the

required. These bridge the gap between

corner of the garage and then spending

the 3 and 4 in the set and the scoring

additional money on clubs that can actually

clubs.

hit but don’t remotely look like the rest of the irons. The Dynacraft Avatar XMOI

Club

Loft

Lie

Weight

Offset

Volume

RC*

21°

60°

242 g

4.8 mm

105 cc

39.5"

The scoring clubs starting with the #8

24°

60.5°

249 g

4.3 mm

102 cc

39"

27°

61°

256 g

3.8 mm

100 cc

38.5"

look more like a traditional iron at address

30°

61.5°

263 g

2.8 mm

95 cc

38"

33.5°

62.5°

270 g

1.8 mm

90 cc

37.5"

37°

63.5°

277 g

1.3 mm

85 cc

37"

41°

64°

284 g

1.3 mm

80 cc

36.5"

45°

64.5°

291 g

1.3 mm

75 cc

36"

50°

64.5°

291 g

0.8 mm

70 cc

36"

56°

64.5°

298 g

0.8 mm

65 cc

36"

set takes on a progressive appearance

and have the nice rounded topline to

throughout the set by blending together

provide plenty of face area. With three

part hollow-bodied iron, with the modern

wedges available, this provides for better

hybrid and making it look like a cohesive set. The #3 and 4 irons in this set have a

Dynacraft Avatar XMOI Hybrid Available RH: #3-9, PW, AW, SW #IH-430

course management by eliminating distance gaps.

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

Hosel Bore: 0.370 in Face Height (#3): 36 mm Breadth (#3): 45 mm

* RC = recommended clublength

LONG IRONS ARE WIDE-SOLED TO PREVENT DIGGING SHORT IRONS ARE NARROW-SOLED FOR PRECISION AND EVERYTHING TRANSITIONS IN-BETWEEN

THE BOLD

THESE ARE NOT YOUR FATHER’S GOLF CLUBS

Nearly all golf clubs on the market are

women who know what women want.

The iBella Bellissima Collection is a truly

have a clue what it is to be a woman.

beautiful design and concept, not only

Right, ladies? This game is difficult

for its stunning appearance but for its

enough that there is no need to penalize

performance to match. Our goal was

women before we ever step foot on the

concentrated on ladies-specific clubs

course, especially for the first time. Hey,

tailored to this demanding market, with

you guys, we don’t swing like men. We

specifications yielding a more user-

don’t want the same club that men use,

friendly line for today’s woman golfer.

but with some pastel colors that that

Each club dons a consistent,

you say makes it a “ladies” club. No,

contemporary appearance with soft,

we want something that will work for the

curving edges, an hourglass center

way women swing the club.

support surrounding a floral motif

The iBella Bellissima Collection is our

inlay and authentic Swarovski crystals

tribute to women’s golf. Designed by

embedded in the sole.

TECHNOLOGY FOR WOMEN

the Bellissima is slimmer, wider and shallower than standard woods, which moves the center of gravity lower and farther back

The result is higher launch angles and longer distances, even at reduced clubhead speeds

IBELLA BELLISSIMA

aND THE

BEAUTIFUL iBella Bellissima Titanium Driver Ultra-forgiving, the Bellissima driver is not only bold, but beautiful as well. The voluminous size and increased hitting surface will exude confidence at address. Coupled with additional loft, the ball will launch high off the tee for maximum distance. Lastly, it is finished in an exquisite gold PVD finish. Available RH: 15° #TM-100116

Gold PVD finish creates a driver that is exclusive and exquisite

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Driver

15°

57°

198 g

1° Closed

460 cc

44"

Face: 6-4 Titanium Body: 100% Titanium Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 56.5 mm Breadth: 116 mm

iBella Bellissima Iron The extremely wide and contoured sole was carefully selected for these irons to complement the swing style of most women golfers who take a sweeping motion. iBella Bellissima Fairway Wood

iBella Bellissima Hybrid

In other words they lack the strength to take a divot.

Why settle for anything less? The Bellissima Fairway

Seemingly transitioned hybrids allow a choice between

The wide sole coupled with the ample bounce allows

Woods are dimensionally proportioned to the matching

the fairways and easier-to-hit higher launching irons.

the club’s sole to effortlessly glide through the grass.

driver and will provide assuredness to get the ball up

These can be mixed and matched to provide the

However, a sweeping motion will almost assuredly

quickly from the fairway or rough. The thick, heavy

ideal set make up. You can make your own choice as

result into the ball being struck low on the clubface.

sole, shallow face and additional loft make these the

what you are more confident with. An incredible high

Therefore it was imperative to move the weight lower

most user-friendly women’s fairway woods on the

percentage of weight is concentrated very low to launch

to not only allow the ball to become airborne, but more

market.

the ball with ease and provide an ultra-solid feel.

importantly provide a solid feel at impact.

Available RH: #3, 5, 7 #M-100116

Available RH: #3, 4, 5, 6 #IW-100118

Available RH: #4-9, PW, SW #I-1231A

Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Club

Loft

Lie

Weight

Offset

Volume

RC*

Club

Loft

Lie

Weight

Offset

Bounce

19°

58°

210 g

0.5° Closed

170 cc

42"

22°

59.5°

242 g

-7 mm

115 cc

38.5"

26°

60°

249 g

6.8 mm

0°

38"

22°

58.5°

220 g

Square

155 cc

41"

25°

60°

249 g

-8 mm

116 cc

38"

29°

61°

256 g

6.3 mm

0°

37.5"

25°

59°

230 g

Square

150 cc

40"

28°

61°

256 g

-9mm

117 cc

37.5"

33°

62°

263 g

5.8 mm

1°

37"

32°

61.5°

263 g

-10 mm

118 cc

37"

37°

63°

270 g

5.3 mm

2°

36.5"

41°

63.5°

277 g

4.8 mm

3°

36"

46°

64°

284 g

4.3 mm

5°

35.5"

50°

64.5°

291 g

3.8 mm

6°

35"

55°

64.5°

295 g

2.8 mm

9°

35"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.335 in.

Bore Type: M2 Face Height (#3): 35 mm Breadth (#3): 85 mm

Face: 431 Stainless Steel Body: 431 Stainless Steel Face Angle: Square

Hosel Bore: 0.370 in Face Height (#3): 31 mm Breadth (#3): 67 mm

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in.

* RC = recommended clublength

RC*

#5 Blade Length: 86 mm #5 Sole Width: 26.4 mm

SYNCHRON II FAIRWAY WOOD

can’t hit an iron? can’t hit a hybrid? NO PROBLEM THE MOST VERSATILE FAIRWAY WOODS IN THE INDUSTRY FOR 13 YEARS RUNNING

FAIRWAY WOODS UP TO #15?

The Synchron II woods are our most popular fairway woods of all time because of their proven ease of play. With eight lofts available in RH and five in LH, this

Before hybrids existed, another group of clubheads where designed as alternatives to irons – the higher lofted fairway woods. These are considered #7 woods and beyond with lofts of 21* or greater possessing the same low and “deep” center of gravity (CG) that are so highly touted in describing hybrids. These clubs can be more advantageous for many golfers who may struggle not only getting the distance they need, but also stopping the ball on the green. Higher lofted fairway woods will hit the ball longer and higher than the same loft in an iron or even a hybrid. Why? They are lighter and their assembled lengths are longer to generate more clubhead speed. In addition, the low and rearward CG coupled with the more flexible shafts will yield a higher trajectory allowing the ball to stop on a dime. These might actually be the clubs you have been looking for all along to help improve your game.

Synchron II Fairway Wood Available RH: #3+, 3, 5, 7, 9, 11, 13, 15 Available LH: #3, 5, 7, 9, 11 #M-900TA Club

Loft

Lie

Weight

Face Angle

Volume

RC*

#3+

13°

58°

212 g

1° Closed

165 cc

43"

16°

59°

212 g

1° Closed

165 cc

43"

19°

60°

216 g

1° Closed

145 cc

42"

cut through the most difficult rough, but

24°

61°

220 g

1° Closed

125 cc

41"

still easy to hit from hard pan lies due to

28°

62°

225 g

1° Closed

120 cc

40.5"

#11

31°

62.5°

230 g

1° Closed

120 cc

40"

#13

34°

63°

235 g

1° Closed

110 cc

39.5"

#15

37°

63.5°

240 g

1° Closed

100 cc

39"

makes this series quite possibly the most versatile in the industry. The dual rails

the shallow face height and low center of gravity. See for yourself why these clubs are in so many bags across the globe!

Face: 17-4 Stainless Steel Body: 17-4 Stainless Steel Hosel Bore: 0.335 in.

Bore Type: M2 Face Height (#3): 32 mm Breadth (#3): 73 mm

TOUR GEAR FAMILY

WHEN YOU WANT VALUE LOOK TO

TOUR GEAR Tour Gear Ti-Alloy Driver Available RH: 10.5° #AMF-101047 Club

Loft

Lie

Weight

Face Angle

Volume

RC*

Driver

10.5°

56°

195 g

Square

460 cc

45"

Face: 7075 Aluminum Body: 7075 Aluminum Hosel Bore: 0.335 in.

Bore Type: M1 Face Height: 54 mm Breadth: 118 mm

Tour Gear Alloy Fairway Wood Available RH: #3, 5 #AM-230415 Club

Loft

Lie

Weight

Face Angle

Volume

RC*

16°

58°

208 g

0.5 Closed

170 cc

43"

21°

59°

218 g

0.5 Closed

150 cc

42"

Face: Aluminum Body: Aluminum Hosel Bore: 0.335 in.

Bore Type: BB Face Height (#3): 38 mm Breadth (#3): 87 mm

Tour Gear Alloy Hybrid Available RH: #3, 4 #AIW-100415

The Tour Gear set is perfect for the player ready to invest into their first set of clubs, but on a

What does the player give up going to the Tour Gear driver versus a comparable sized titanium driver? Forgiveness is not much different since the weight is spread around its perimeter. Where the difference lies is in the face thickness and the ball velocity coming off of the face. Most titanium drivers have a 3mm face or thinner. An aluminum face has to be much thicker to withstand the force of striking a ball therefore there is a drop off in the coefficient of restitution (COR) or rebound effect. What is this amount to in layman’s terms? Figuring if this golfer is a beginning male player swing close to 90 mph, he might give up 8 yards in carry and less roll, all else being equal. The matching fairways and hybrids are die cast of aluminum and iron of zinc to reduce cost compared to standard stainless steel. All have a level of game improvement features, but not to the same cutting edge degree as the steel models in this catalog. Note with the softer alloys, they will tend to show a bit more wear and tear. Lastly, the irons cannot be adjusted for lie.

Loft

Lie

Weight

Offset

Volume

22°

60°

236 g

- 9 mm

110 cc

40"

24°

60.5°

243 g

-10 mm

100 cc

39.5"

Face: Aluminum Body: Aluminum Face Angle: 0.5 Closed

ALLOY PERFORMANCE WHAT YOU CAN EXPECT

Club

limited budget. Economical, yet stylish, these will

RC*

Hosel Bore: 0.370 in Face Height (#3): 31 mm Breadth (#3): 65 mm

Tour Gear Zinc Iron Available RH: #3-9, PW, SW #ZI-0033A

help to get them started off correctly. Club

Loft

Lie

Weight

Offset

Bounce

21°

59°

242 g

4.9 mm

0°

39"

25°

60°

249 g

4.4 mm

1.5°

38.5"

confidence-building size for the beginning

28°

60.5°

256 g

4.4 mm

2°

38"

player. It is forged from 7075 aircraft grade

30°

61.5°

263 g

3.4 mm

2.5°

37.5"

aluminum to have the same size and weight

33°

62°

270 g

2.9 mm

3°

37"

38°

62.5°

277 g

2.9 mm

3.5°

36.5"

• The Tour Gear driver is the perfect

as today’s titanium driver, but at a fraction of the cost. • The matching fairway woods boast generous lofts to get the ball airborne as most golfers know what a struggle hitting those clubs can be. • The low profile hybrids will make the ideal

RC*

41°

63°

284 g

2.4 mm

7°

36"

47°

64°

291 g

1.4 mm

10°

35.5"

56°

64°

298 g

1.9 mm

15°

35.5"

Face: Zinc Body: Zinc Hosel Bore: 0.370 in.

#5 Blade Length: 79 mm #5 Sole Width: 22mm

note: due to the slightly larger hosel OD, when ordering ferrules, please use FR1013TG.

substitution for those hard-to-hit long irons. • Finally, the Tour Gear irons feature a generous hitting area with full perimeter weighting.

JUNIOR GOLF CLUBS

JUNIOR GOLF CLUBS DESIGNED WITH REAL KIDS IN MIND 46

Wait a minute. What do you mean “with real kids in mind”? Aren’t all junior clubs made for kids? Unfortunately, more often than not, that’s not the case. Many junior clubs are either big-people clubs cut to smaller size, which means that they are too large and too heavy for most kids, OR cheap imitation clubs meant mostly as toys, which means that your kids will be playing with wayless-than-optimal equipment that will hurt their games in the long run, if they continue to play golf at all. The Acer XP Protege and iBella Daisy junior clubs are designed and spec’d just for kids. Lighter weights, higher lofts, more flexible shafts are just some of the features built into these clubs to get your kids’ games going in the right direction.

FOR BOYS Acer XK Protege Junior Clubs

FOR GIRLS iBella Daisy Junior Clubs

Designed for kids by big kids, these are not just men’s sets cut smaller. Instead,

Get her started the correct way by introducing her to the game with the iBella

these clubs have specifications that will help them succeed from the first swing

Daisy set. It all starts out with lighter weight heads with more flexible shafts for

and not create bad habits from ill-fitted equipment. This is the key for maximum

their developing body. Ample loft will ensure she gets the ball in the air and excel

playability and long-lasting enjoyment of the game. Stand bags for age 5-8 are

so your precious little girl can enjoy herself out on the course. Stand bags for age

25” tall. Stand bags for age 9-12 are 30” tall.

5-8 are 25” tall. Stand bags for age 9-12 are 30” tall.

Available either as individual pre-assembled clubs or box set.

Available either as individual assembled clubs or box set.

7-Piece Set for Age 5-8 Recommended for kids 48-54 inches tall. Comes with: Driver with headcover, #5 Hybrid, #7 Iron, Putter, Stand Bag with rainhood #ACERXK1

7-Piece Set for Age 5-8 Recommended for kids 48-54 inches tall. Comes with: Driver with headcover, #5 Hybrid, #7 Iron, Putter, Stand Bag with rainhood #DAISY1

8-Piece Set for Age 9-12 Recommended for kids 54-60 inches tall. Comes with: Driver with headcover, #5 Hybrid, #7 Iron, #9 Iron, Putter, Stand Bag with rainhood #ACERXK2

8-Piece Set for Age 9-12 Recommended for kids 54-60 inches tall. Comes with: Driver with headcover, #5 Hybrid, #7 Iron, #9 Iron, Putter, Stand Bag with rainhood #DAISY2

Model #

Club

Loft

Lie

Weight

Volume

Material

Clublength

Model #

Club

Loft

Lie

Weight

Volume

Material

Clublength

ACERXK058-001

Driver

14°

56°

200 g

380 cc

Aluminum

33”

DAISY058-001

Driver

14°

56°

200 g

380 cc

Aluminum

33”

ACERXK058-005

#5 Hybrid

28°

61°

232 g

120 cc

Aluminum

30”

DAISY058-005

#5 Hybrid

28°

61°

232 g

120 cc

Aluminum

30”

ACERXK058-007

#7 Iron

38°

60°

238 g

Zinc

29.5”

DAISY058-007

#7 Iron

38°

60°

238 g

Zinc

29.5”

ACERXK058-PTR

Putter

4°

72°

245 g

Zinc

30.5”

DAISY058-PTR

Putter

4°

72°

245 g

Zinc

30.5”

BAG050-001

Stand Bag

BAG051-001

Stand Bag

Model #

Club

Loft

Lie

Weight

Volume

Material

Clublength

Model #

Club

Loft

Lie

Weight

Volume

Material

Clublength

ACERXK912-001

Driver

14°

56°

200 g

380 cc

Aluminum

37”

DAISY912-001

Driver

14°

56°

200 g

380 cc

Aluminum

37”

ACERXK912-005

#5 Hybrid

28°

61°

232 g

120 cc

Aluminum

34”

DAISY912-005

#5 Hybrid

28°

61°

232 g

120 cc

Aluminum

34”

ACERXK912-007

#7 Iron

38°

60°

238 g

Zinc

33.5”

DAISY912-007

#7 Iron

38°

60°

238 g

Zinc

33.5”

ACERXK912-009

#9 Iron

45.5°

61°

253 g

Zinc

32.5”

DAISY912-009

#9 Iron

45.5°

61°

253 g

Zinc

32.5”

ACERXK912-PTR

Putter

4°

72°

245 g

Zinc

30.5”

DAISY912-PTR

Putter

4°

72°

245 g

Zinc

30.5”

BAG052-001

Stand Bag

BAG053-001

Stand Bag

OUR MOST VERSAT VERSATILE D-GRIND SOLE PLUS A HUGE ASSORTMENT OF LOFTS PLUS FOUR DIFFERENT FINISHES EQUALS THE ACER XB WEDGE

The Acer XB combines the tradition, beauty and elegance of the past you would only expect with a blade style wedge. Starting with a classic teardrop shape, tapered hosel, very minimal offset, thin top line and narrow sole, no attention to detail is left out. The four-way cambered sole and moderate bounce angles allow for maximum playability from a variety of situations you may encounter on the course. The versatility of the D-grind sole allows for the face to be opened when needed and is good from any lie to produce creative face angle positions for shots like “bump and run” and “the flop” around the green. Perhaps the greatest attribute is that no other set of wedges are as complete and versatile as the Acer XB wedges. There are as many as 8 different lofts to choose from providing you with total short-game

pearl chrome

The D-grind sole allows you to open up the clubface while still keeping the leading edge low. This reduces the possiblity of blading the ball.

black

mirror

satin

ACER XB WEDGE

TILE SERIES OF WEDGES Acer XB Wedge Pearl Chrome Available RH: 52°, 56°, 60°, 64° Available LH: 52°, 56°, 60°, 64° #I-297C

management. Many golfers are content with the standard 52, 56 and 60 degree set up, which we have you covered. We also have the harder, if not impossible to find higher lofted wedges like the 64 and the 68 degree (satin finish only) for the high little delicate shots when you need to have the ball land softly. With so many pitching wedges being manufactured with 46º of loft, for many golfers it makes more sense to carry 50, 54 and 58 degree lofts instead. This way they have the nice

Club

Loft

Lie

Weight

Offset

Bounce

RC*

Gap

52°

64°

294 g

1 mm

12°

35.5"

Sand

56°

64°

300 g

0 mm

14°

35.5"

Lob

60°

64°

300 g

0 mm

12°

35.5"

High Lob

64°

300 g

0 mm

8°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in

56° Blade Length: 79 mm 56° Sole Width: 21.6 mm

Acer XB Wedge Black Available RH: 52°, 56°, 60°, 64° Available LH: 52°, 56°, 60°, 64° #I-297Q Club

Loft

Lie

Weight

Offset

Bounce

RC*

Gap

52°

64°

294 g

1 mm

12°

35.5"

Sand

56°

64°

300 g

0 mm

14°

35.5"

Lob

60°

64°

300 g

0 mm

12°

35.5"

High Lob

64°

300 g

0 mm

8°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in

56° Blade Length: 79 mm 56° Sole Width: 21.6 mm

separation in distance without gaps from their game-improvement irons and still cover the majority of shots they will encounter on the course. The appearance is equally as superb as its

Acer XB Wedge Mirror Available RH: 50°, 52°, 54°, 56°, 58°, 60°, 64° Available LH: 52°, 56°, 60°, 64° #I-297B

performance. The Acer XB Wedges are precision

Club

Loft

Lie

Weight

Offset

Bounce

RC*

cast in four different finishes: lustrous pearl chrome,

Gap

50°

64°

294 g

1 mm

10°

35.5"

an elegant non-glare matte black, brilliant high polish and maintenance-free satin. Lastly, the grooves conform to the Rules of Golf.

Gap

52°

64°

294 g

1 mm

12°

35.5"

Sand

54°

64°

300 g

0 mm

14°

35.5"

Sand

56°

64°

300 g

0 mm

14°

35.5"

Lob

58°

64°

300 g

0 mm

12°

35.5"

Lob

60°

64°

300 g

0 mm

12°

35.5"

High Lob

64°

300 g

0 mm

8°

35.5"

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in

which lofts to choose?

56° Blade Length: 79 mm 56° Sole Width: 21.6 mm

Acer XB Wedge Satin Available RH: 50°, 52°, 54°, 56°, 58°, 60°, 64°, 68° Available LH: 52°, 56°, 60°, 64° #I-297A

With so many lofts to choose from,

Club

Loft

Lie

Weight

Offset

Bounce

RC*

how do you know which ones

Gap

50°

64°

294 g

1 mm

10°

35.5"

Gap

52°

64°

294 g

1 mm

12°

35.5"

Sand

54°

64°

300 g

0 mm

14°

35.5"

Sand

56°

64°

300 g

0 mm

14°

35.5"

Lob

58°

64°

300 g

0 mm

12°

35.5"

pitching wedge. If your PW loft is

Lob

60°

64°

300 g

0 mm

12°

35.5"

45° - 46°, then go with a 50°, 54°,

High Lob

64°

300 g

0 mm

8°

35.5"

58° set makeup. If your PW loft is

Super HL

68°

64°

300 g

0 mm

6°

35.5”

are right for you? It’s easy. The goal is to try to get no less than 4° difference per loft. So look at your

47-48°, try a 52°, 56°, 60° set.

Face: 431 Stainless Steel Body: 431 Stainless Steel Hosel Bore: 0.370 in

56° Blade Length: 79 mm 56° Sole Width: 21.6 mm

DYNACRAFT DUAL MILLED CNC FORGED WEDGE

SOFT TOUCH, STOPS ON A DIME BUTTERY-SOFT forged carbon steel plus CNC milled grooves for the ultimate WEDGE

The Dynacraft Dual Milled wedges start with a five step forging process from a billet of soft 1021 carbon steel providing that unmistakable feel coveted by the most prestigious golfers in the world. This is indeed a true forging that is not to be construed with form forging using harder 8620 carbon steel that many other companies chose to manufacturer their wedges.

Dynacraft Dual Milled CNC Forged Wedge Available RH: 52°. 56°. 60° #FI-2585

Each groove is CNC milled to U-grooves that ensures consistency of both groove width and depth. Less sophisticated methods such as stamping or hand grinding are simply not as precise and accurate. A secondary skim milling operation is performed on the face to create tiny micro-grooves which helps to increase surface roughness and further channel moisture between the ball and clubface for maximum spin. A brilliant high-chrome finish provides the classic look for years of durability and beauty. A thin

Club

Loft

Lie

Weight

Offset

Bounce

RC*

Gap

52°

64°

300 g

2 mm

7°

35.5"

Sand

56°

64°

300 g

2 mm

12°

35.5"

Lob

60°

64°

300 g

2 mm

15°

35.5"

Face: 1021 Carbon Steel Body: 1021 Carbon Steel Hosel Bore: 0.370 in

topline and minimal offset, preferred by many at address, augment the semi-narrow 4-way camber sole design.

HOW TO DELIVER PERFECT CONSISTENCY Dual Face Skim Milling

CNC Milled Grooves

Ensure perfect flatness and

Ensure uniformity groove to

increased surface roughness for superior bite

SANDBLASTER WEDGE

WHEN YOU’RE ON THE BEACH

IT’S TIME TO GO SURFING

DUAL SOLE TECHNOLOGY PREVENTS DIGGING TO GET YOU OUT OF TROUBLE FAST

groove that you just can’t get

DEPTH

from cast grooves

56° Blade Length: 76 mm 56° Sole Width: 21 mm

ACER XC WEDGE

EVER SEEN A GAMEIMPROVEMENT WEDGE? NOW YOU HAVE.

Rarely is there any innovation in wedges today as most take on a classic blade shape that was popular decades ago. While the limited offset aids in alignment and the narrow sole allows for the ability of opening up the blade for flop shots and other creative attempts, they do little in the way of providing forgiveness when you are not on your “A” game. The Acer XC wedge series possess the thin topline, limited offset and blade-style appearance that golfers have been accustomed to. But the difference is in the weighting which you cannot see in the address position. The undercut channel redistributes material so the there is more weight lower and more rearward allowing for an increased trajectory and spin to hold the greens better. Aggressive grooves offer maximum spin and control on approach shots to and around the greens. See for yourself how the Acer XC wedges can offer golfers of all abilities tour level quality with game improvement features.

AN UNDERCUT ON A WEDGE? WHO’D DA THUNK IT?

Acer XC Wedge Available RH: 52°, 56°, 60° Available LH: 52°, 56°, 60° #I-286C Club

Loft

Lie

Weight

Offset

Bounce

RC*

Gap

52°

64°

290 g

0.5 mm

10°

35.5"

Sand

56°

64°

300 g

0 mm

14°

35.5"

Lob

60°

64°

300 g

0 mm

10°

35.5"

Face: 4-31 Stainless Steel Body: 4-31 Stainless Steel Hosel Bore: 0.370 in

56° Blade Length: 78 mm 56° Sole Width: 25 mm

Sure, everybody loves to talk about game-improvement irons, but nobody ever talks about game-improvement wedges. Why not? Tradition perhaps, but the fact is, not everybody is going to hit a wedge in the center of the face every time. So why not give yourself a little help for those times that you don’t?

The Sand Blaster is the ideal weapon from any trap.

Innovative dual sole technology acts like skiis in the water, gliding across the sand or rough! Unique hollow twopiece construction allows the sole width to be increased

Sandblaster Wedge Available RH: #52° #I-2772A

dramatically to make it the most forgiving sand wedge we have ever engineered in either soft or firm sand, and even chipping and pitching around the green. Designed with a negative offset or “face-forward” feature which will help those who may have a tendency to pick or sweep the ball and makes this club virtually shank-proof. Also features a very deep face and an ultra-wide, convex sole. Regain confidence in your short-game and lower your score with the Sand Blaster Wedge.

Dual Sole Technology Digging into the sand and deceleration of the clubhead are the biggest reasons your ball goes nowhere. The extra-wide sole is concaved in the middle to minimize drag and help accelerate the club through the sand.

Club

Loft

Lie

Weight

Offset

Bounce

RC*

52° Wedge

52°

64°

300 g

-4.5 mm

3°

35.5"

Face: 4-31 Stainless Steel Body: 4-31 Stainless Steel Hosel Bore: 0.370 in

Blade Length: 73 mm Sole Width: 57 mm

PROFESSIONAL OPEN SERIES 690 WEDGES

PEAK PERFORMANCE PRACTICALLY PRICED The Professional Open Series 690 wedges are the perfect balance of performance and value

The Professional Open Series 690 wedge series features a unique beveled sole combined with a tour proven shape and bounce design to provide accurate play from any lie. The satin finish wedge includes the hard-to-find 68º loft with 0º of bounce…now you can finally play the flop shot! Available in classic satin finish or non-glare black melonite.

Professional Open Series 690 Black Wedge Available RH: 52°, 56°, 60°, 64° Available LH: 52°, 56°, 60°, 64° #I-128Q Club

Loft

Lie

Weight

Offset

Bounce

RC*

Club

Loft

Lie

Weight

Offset

Bounce

RC*

Gap

52°

64°

291 g

1 mm

10°

35.5"

Gap

52°

64°

291 g

1 mm

10°

35.5"

Sand

56°

64°

298 g

0 mm

16°

35.5"

Sand

56°

64°

298 g

0 mm

16°

35.5"

Lob

60°

64°

305 g

0 mm

12°

35.5"

Lob

60°

64°

305 g

0 mm

12°

35.5"

High Lob

64°

312 g

0 mm

5°

35.5"

High Lob

64°

312 g

0 mm

5°

35.5"

Flop

68°

64°

312 g

0 mm

0°

35.5"

CHIPPERS

Face: 4-31 Stainless Steel Body: 4-31 Stainless Steel Finish: Black Melonite

Professional Open Series 690 Satin Wedge Available RH: 52°, 56°, 60°, 64°, 68° Available LH: 52°, 56°, 60°, 64° #I-128

Hosel Bore: 0.370 in 56° Blade Length: 79 mm 56° Sole Width: 20 mm

Face: 4-31 Stainless Steel Body: 4-31 Stainless Steel Hosel Bore: 0.370 in

Dynacraft Avatar Chipper The Avatar Chipper features a unique gooseneck hosel design which makes this club shank-proof. Stainless steel construction with an extremely wide sole prevents scuffing the turf. Available RH #CP-25 Loft: 35° Lie: 71° Weight: 310g Material: 431 Steel Hosel Bore: 0.370” RC*: 35”

56° Blade Length: 79 mm 56°Sole Width: 20 mm

True Ace Chipper The True Ace Chipper features a cavity back and toe/heel weighting with an elongated face for optimal accuracy. Four-way chamber sole allows the club to glide through the grass to ensure solid contact with the ball.

Two-Way Chipper The Two-Way Chipper has a double-sided face to get you out of the most difficult situations. This club can be used by either right or left handed players.

Available RH

#i-450

#ZC-06 Loft: 35° Lie: 71° Weight: 315g Material: Zinc Bore: 0.370” RC*: 35”

Can be used either RH or LH

Loft: 18° Lie: 73° Weight: 305g Material: Zinc Bore: 0.370” RC*: 35”

ACER XK CHIPPER & FLIPPER

GETTING IT CLOSE HAS NEVER BEEN EASIER NEW! Acer XK Flipper #CP1026H-001

Acer XK Chipper #CP1025H5-001

Acer XK Chipper with 37° loft

Acer XK Flipper with 46° loft

The Acer XK Chipper series is enhanced with the addition of the Acer XK Flipper, for those situations when you don’t want a lot of roll.

The original Acer XK Chipper combines the

near the hole around the green? If the answer

loft of an 8-iron with the weight and lie of a

to that is not very good, then one of these ultra-

putter. The ultra-wide contoured sole glides

wide soled clubs may be that club you have

across either the rough or the close cropped

been missing from the bag. Use the 37º XK

apron surrounding the green. Gooseneck, over

Chipper when you have some room for the ball

the-hosel design increases the effective face area

to release and roll toward the hole or the 47º XK

and eliminates the possibility of shanking the ball

Flipper when you need to make that “fly & die” or

like with an iron. The Acer XK Chipper is perfect

“pop and stop” shot.

for producing that pitch and run shot around the green. However, what happens when you miss the green short sided or when there is little room

Acer XK Chipper Available RH & LH Loft: 37° Lie: 72° Head Weight: 331g Shaft Size: 0.370” (steel shaft only) Recommended Clublength: 34” Model #: CP1025H5-001

Acer XK Flipper Available RH & LH Loft: 46° Lie: 72° Head Weight: 331g Shaft Size: 0.370” (steel shaft only) Recommended Clublength: 34” Model #: CP1026H-001

between the fringe and the hole to work with? A pitch and run shot will surely run the ball past the hole and further from your goal. What you need is a club that is a cross between a chip shot and a flop and there is only one club on the market to do just that - innovative Acer XK Flipper, which is not just another ordinary chipper on the market. Now ask yourself how comfortable are you at

Use the Acer XK Chipper when you want to roll the ball close to the hole. Use the Acer XK Flipper when you want the ball to fly close and stop.

pulling a wedge out of your bag to cozy the ball

dynacraft on-line putter

GET YOUR PUTTING ON-LINE

MEET THE WORLD’S FIRST TRIPLE-MULTI-TASKING PUTTER The On-Line is a multi-functional putter that the first thing you will say, is why didn’t someone come out with this before? For starters, the mallet design offers plenty of heel-toe weighting to ensure the ball rolls straight on its intended target. The size of the horseshoe shaped opening was not only carefully selected to act an extremely effective alignment guide, but you can scoop up the ball without having to bend over. If you look closely, there are two slits on either side of the putter. With

THE DYNACRAFT ON-LINE PUTTER IS THREE PUTTERS-IN-ONE

the ball cradled while the putter is suspended in the air, these slit coincide exactly with the equator of the ball. Take a Sharpie pen and you can mark straight lines on both sides of the ball. Finally, no more digging in your bag looking for your ball marker tool, it is already built into the On-Line putter.

1. MARK YOUR BALL (sharpie not included)

Align…Putt…Pick up…Mark your ball…The Dynacraft On-line putter does it all!

Dynacraft On-Line Putter Available RH #P-390 Material: Stainless Steel Lie: 72° Loft: 3° Weight: 365g Shaft: 90° Bores / Posts Blade Length: 101.5mm Sole Width: 73mm Length: 34”

2. ALIGN & PUTT

3. SCOOP IT UP!

IBELLA VOLARE & TIARA PUTTER

NO MEN ALLOWED WOMENS PUTTERS DESIGNED ONLY FOR WOMEN. ONLY FROM IBELLA.

iBella Volare Putter

iBella Tiara Putter

Exclusively designed for women, the Volare putter is iBella’s

Exclusively designed for women, the iBella Tiara Putter dons

answer to the classic blade putter. At address, the Volare

a contemporary look with soft, flowing edges, an hourglass

takes the shape of butterfly wings which furnishes the

center support and is surrounded by authentic Swarovski

enhanced heel / toe weighting to deliver exceptional results.

crystals in the outer ring. The beautiful appearance is not

Authentic Swarovski crystals accent this contemporary

adorned for its looks alone, by also crafted to maximize

design.

forgiveness by placing the weight where it is needed most. Rounding out the shape, the Tiara putter is center-shafted for

Available RH #P-385

ease of alignment and consists of a diamond-milled periwinkle face insert for a perfectly flat surface.

Material: Stainless Steel Lie: 72° Loft: 3° Weight: 370g Shaft: Straight Blade Length: 35.5mm Sole Width: 115.5mm Length: 34”

Available RH #P-188C Material: Stainless Steel Lie: 71° Loft: 3° Weight: 365g Shaft: Straight (0.370” steel only) Blade Length: 93mm Sole Width: 106mm Length: 34”

acer cb putters

BREAKING THE MOLD Each Acer CB series putter started out as an idea to provide the most rear and extreme perimeter weighting available today in each model. Any amount of unwanted twisting can result in the ball being lipped out or traveling completely off-line. For many years heel/toe weighted putters have improved upon providing a more balanced design than blade style models of the past. The Acer CB series take it one notch higher by shifting that weight as far rearward as possible. This does two important things. The extreme perimeter weighting creates an ultra-high MOI keeping the ball traveling on its intended line without loosing energy. Secondly, moving the weight rearward helps reduce the skidding of the ball and helps the ball start rolling quicker for better distance control.

CB7 Available RH #P-181

CB8 Available RH #P-198

CB2 Available RH #CB2

CB3 Available RH #P-169

Material: Stainless Steel Lie: 72° Loft: 3° Weight: 368g Shaft: Straight (0.370” steel only) Blade Length: 101.5mm Sole Width: 101.5mm Length: 34”

Material: Stainless Steel Lie: 72° Loft: 3° Weight: 390g Shaft: 90° Bores / Posts Blade Length: 89.5mm Sole Width: 97.5mm Length: 34”

Body: Aluminum Ring: Stainless Steel Lie: 70° Loft: 3° Weight: 420g Shaft: Straight (0.370” steel only) Blade Length: 127mm Sole Width: 111mm Length: 34”

Material: Stainless Steel Lie: 90° Loft: 3° Weight: 405g Shaft: 90° Bores / Posts Blade Length: 67mm Sole Width: 95mm Length: 34”

WHAT MAKES THE CB PUTTERS SO FORGIVING?

CB4 Available RH #P-177

CB5 Available RH #P-178

CB6 Available RH #P-179

Material: Stainless Steel Lie: 70° Loft: 3° Weight: 370g Shaft: Straight (0.370” steel only) Blade Length: 68mm Sole Width: 96mm Length: 34”

Material: Stainless Steel Lie: 90° Loft: 3° Weight: 400g Shaft: 90° Bores / Posts Blade Length: 69.5mm Sole Width: 83mm Length: 34”

Material: Stainless Steel Lie: 72° Loft: 3° Weight: 360g Shaft: Straight (0.370” steel only) Blade Length: 73mm Sole Width: 74mm Length: 34”

It’s all about moment of inertia. Moment of inertia (MOI) is a measure of resistance to twist. The higher the MOI, the more resistant the clubhead is to twisting, and the straighter the ball will go on mis-hits.

BIONIK NANO WHITE PUTTERS

WHEN IT’S EASIER TO SEE, IT’S EASIER TO SINK Hot Nano White finish added to best selling Bionik 101 & 105 putters! Bionik 105 Nano White Putter #ZP794N-001

Bionik 101 Nano White Putter #ZP795N-001

Did you know that one of the biggest problems in putting is lining up the ball? It’s true. Research has shown that most of us can make a consistent putting stroke, but we can’t tell when we’re lined up incorrectly. Enter the new Bionik Nano White putters. Our best-selling Bionik 105 and Bionik 101 putters are now available with a high-optic vivid white finish. The nano white combined with black alignment bars provide the perfect color contrast to help ensure that you are properly lined up at address. It not only works great, but

Bionik 101 Nano White Putter Available RH & LH Body Material: Zinc Face Insert: Milled Aluminum Lie: 72° Head Weight: 330g Shaft Size: 0.370” Straight Recommended Clublength: 34” Model #: ZP795N-001

creates an unusually striking and extremely durable new appearance. The zinc body is highlighted with an aluminum precision milled face insert to provide a soft but crisp feel. Requires a straight .370” straight putter shaft .

The high contrast finish of the Bionik White Nano putters makes it easier to line up your putt

Bionik 105 Nano White Putter Available RH Body Material: Zinc Face Insert: Milled Aluminum Lie: 72° Head Weight: 320g Shaft Size: 0.370” Straight Recommended Clublength: 34” Model #: ZP794N-001

Features aluminum face insert for that soft yet crisp feel

BIONIK PUTTERS

AFFORDABILITY WITHOUT COMPROMISE

The Bionik putters are the new standard in value. State-of-theart design and performance is combined with affordability to create a putter that any golfer can enjoy and be proud of.

Bionik 500 Series with TPU Insert

Bionik 501

Bionik 502

Bionik 503

Bionik 504

Bionik 505

Available RH & LH #ZP97110B

Available RH & LH #ZP97010B

Available RH & LH #ZP96710B

Available RH & LH #ZP96610B

Available RH #ZP-969

Material: Zinc Lie: 90° Loft: 3° Weight: 355g Shaft: 90° Bores / Posts Blade Length: 116mm Sole Width: 55mm Recommended Clublength: 34”

Material: Zinc Lie: 90° Loft: 3° Weight: 330g Shaft: 90° Bores / Posts Blade Length: 116mm Sole Width: 55mm Recommended Clublength: 34”

Material: Zinc Lie: 72° Loft: 3° Weight: 330g Shaft: Straight Blade Length: 105mm Sole Width: 68mm Recommended Clublength: 34”

Material: Zinc Lie: 72° Loft: 3° Weight: 335g Shaft: Straight Blade Length: 105mm Sole Width: 68mm Recommended Clublength: 34”

Material: Zinc Lie: 72° Loft: 3° Weight: 360g Shaft: Straight Blade Length: 105mm Sole Width: 68mm Recommended Clublength: 34”

Bionik 100 Series with Aluminum Insert

WHICH TYPE OF INSERT IS RIGHT FOR YOU? The Bionik Series of putters features two types of insert.

Bionik 105

Bionik 101

Available RH #ZP794A

Available RH & LH #ZP795B

Material: Zinc Lie: 72° Weight: 320g Shaft: Straight Recommended Clublength: 34”

Material: Zinc Lie: 72° Weight: 330g Shaft: Straight Recommended Clublength: 34”

The soft TPU insert of the Bionik 500 Series allows the ball to stay on the face a fraction longer, providing enhanced feel. Use this type of insert for faster greens. The Bionik 100 Series features a milled aluminum insert, to provide crisp feedback at impact. Use this type of insert for medium speed greens.

VALUE PUTTERS

Brass Putter

Gray Zinc Putter

Black Zinc Putter #506

Black Zinc Putter #515

Black Zinc Putter #509

Black Zinc Putter #520

Two-Way Zinc Putter #103

Junior Putter

Material: Brass Lie: 73° Weight: 300g Shaft: Straight Length: 34”

Material: Zinc Lie: 74° Weight: 295g Shaft: Straight Length: 34”

Material: Zinc Lie: 73° Weight: 295g Shaft: Straight Length: 34”

Material: Zinc Lie: 73° Weight: 305g Shaft: Straight Length: 34”

Material: Zinc Lie: 72° Weight: 300g Shaft: Straight Length: 34”

Zinc Lie: 73° Weight: 245g Shaft: Straight Length: 34”

Available RH #P-306

Available RH #ZP-230

RH: #P-506 LH: #P-110

Available RH #ZP-114H

Available RH #ZP-109H

Available RH #ZP-112

Can be used RH or LH #P-103

RH: #JRP LH: #JRPL

PUTTER HOSEL ADAPTERS These precision cast, stainless steel adapters are designed to fit virtually any putter with a 0.370” parallel bore 90° socket and transform it into an entirely different putter regardless of manufacturer. Each has an attractive neutral bead blast finish and three styles to choose from. Directions: Simply test fit stem into the putter’s socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft – it’s that simple!

BUILDING BELLY & LONG PUTTERS The belly putter is really nothing more than an extension of a regular putter as the stance and hand position is usually the same as with a conventional putter. Existing putters can be made into belly putters, while heavier heads (350 - 400g range) work best for this. You can either re-shaft with a longer shaft specifically designed for belly putters or extend an existing putter by approximately 9” (you can always shorten it if it a little too long). Most belly putters are in the 38”-45” range, with 43” being most popular. Unlike belly putters, long putters cannot be easily converted from a standard putter. Most long putters have a lie angle of approximately 79°. It is very difficult to find bent putter shafts with the proper lie angle for putters with a 90° bore/socket. Therefore we have made available a special hosel adapter. Long putter perform best with heavier heads (400g +) as the added head weight helps from a feel standpoint and the stroke tends to be shorter. Long putter are generally in the 46-52” range and will depend upon the height and anchor point on the body as the exact length which might be best for the golfer.

Long/Broomstick Putter Adapter Converts the lie angle to 79° for use as a long or broomstick putter as the post is designed to fit the inside diameter of the Apollo 53” long putter shaft. Weighs 20g and these will work for either a RH or LH putter. #H-001

Slant Hosel Putter Adapter Converts a RH putter designed to have a compound triple bent shaft with the proper lie/offset and accept a straight shaft. Weighs 44g. #H-002

Plumber’s Neck Putter Adapter Converts a RH putter designed to have a compound triple bent shaft with the proper lie and reduced or nonoffset configuration and accept a straight shaft. Weighs 44g. #H-003

79° lie for long putters no offset

72° lie for standard & belly putters

slant offset

72° lie for standard & belly putters

plumber’s neck offset

PUTTER SHAFTS

ABOUT FREQUENCY FILTERED SHAFTS

Stepped

Stepless

Bent

The UST-Mamiya Frequency Filtered putter shafts amplify touch and feel to improve the ability of players to perceive or feel where ball impact occurs on the face. A Filtering Diffuser is located in the mid-section and filters out higher, unwanted vibrations. Therefore, only the true feeling of the ball impacting the putter face is released to the hands. This instantaneous feedback results in improved putting ability. Interlinked Carbon fiber in the butt-section creates a tremendous amount of hoop strength for a consistently solid feel in the hands. The steel tip-section makes the shaft a perfect fit for the hottest putter heads on the market.

Frequency Filtered

STANDARD LENGTH SHAFTS FOR PUTTERS WITH ANGLED HOSELS / BORES Brand

Model #

Description

Usage

Bend

Tip Dia.

Butt Dia.

Weight

Apollo

APPS36

Standard Stepped 36"

Straight stepped shaft for conventional length putters

Straight

0.370"

0.590"

36"

116 g

Apollo

APPN36

Standard Stepless 36"

Straight stepless shaft for conventional length putters

Straight

0.370"

0.590"

36"

120g

Apollo

AP46OP

Double Bend 72º (Offset)

Fits RH or LH putter with standard 70°-72º bore angle to create offset

Offset

0.370"

0.590"

36"

116g

True Temper

USTP

Stepless Putter

Straight stepless shaft for conventional length putters

Straight

0.370"

0.600"

38”

122g

True Temper

STP

Stepless Putter Tapered

Fits select OEM standard length putters requiring a straight 0.355” taper putter shaft such as Ping.

Straight

0.355" Taper

0.600"

38”

122g

UST-Mamiya

USTFFS

Frequency Filtered Straight

Straight stepless shaft for conventional length putters

Straight

.370"

0.580"

36"

106g

LONG/BELLY SHAFTS FOR PUTTERS WITH ANGLED HOSELS / BORES Brand

Model #

Description

Usage

Bend

Tip Dia.

Butt Dia.

Length

Weight

Apollo

APPN43

Stepless Belly 43"

Straight stepless shaft for belly length putters

Straight

0.370"

0.600"

43"

130g

Apollo

APPN53

Long Stepless 53"

Straight stepless shaft for long or chest length putters

Straight

0.370"

0.600"

53"

236g

True Temper

UCSP

Stepped Belly Putter

Straight stepped shaft for belly length putters

Straight

0.370"

0.600"

50”

214g

True Temper

UCSP625

Stepped Long Putter

Straight stepped shaft for long or chest length putters

Straight

0.370"

0.625"

53”

227g

True Temper

USTP625

Stepless Long Putter

Straight stepless shaft for long or chest length putters

Straight

0.370"

0.625"

53”

234g

STANDARD LENGTH SHAFTS FOR STANDARD PUTTERS WITH 90° BORES / POSTS Brand

Model #

Description

Usage

Bend

Tip Dia.

Butt Dia.

Length

Weight

Apollo

AP46CP

Triple Bend 90º

Fits RH putter with 90º bore angle to achieve @ 72º lie angle plus offset

Offset + 72° Lie

0.370"

0.590"

35"

120g

Apollo

APL46CP

Triple Bend 90º LH

Fits LH putter with 90º bore angle to achieve @ 72º lie angle plus offset

Offset + 72° Lie

0.370"

0.590"

35"

120g

Apollo

STA12P3675

Single Bend Curved 75º

Fits RH or LH putter with 90º bore angle to achieve @ 75º lie angle

75° Lie

0.370"

0.590"

36"

115g

True Temper

USTP1B

Stepless Single Bend

Fits RH or LH putter with 90º bore angle to achieve @ 72º lie angle

72° Lie

0.370"

0.600"

38”

122g

True Temper

USTP2B

Stepless Double Bend

Fits RH putter with 90º bore angle to achieve @ 72º lie angle plus offset

Offset + 72° Lie

0.370"

0.600"

38”

122g

UST Mamiya

USTFFDB2

Frequency Filter Curved

Fits RH putter with 90º bore angle to achieve @ 72º lie angle plus offset

Offset + 72° Lie

0.370"

0.580"

36"

106g

LONG/BELLY SHAFTS FOR PUTTERS WITH 90° BORES / POSTS Brand

Model #

Description

Usage

True Temper

USTP6251B

Stepless Single Bend

Fits RH or LH long or chest length putter with 90º bore angle to achieve @ 72º lie angle

True Temper

USTP6252B

Stepless Double Bend

Fits RH long or chest length putter with 90º bore angle to achieve @ 72º lie angle plus offset

Bend

Tip Dia.

Butt Dia.

Length

Weight

72° Lie

0.370"

0.625"

51”

234g

Offset + 72° Lie

0.370"

0.625"

52”

234g

Hosel Type

Tip Dia.

Butt Dia.

Length

Weight

Straight

0.382" ID

0.600"

38”

128g

SHAFTS FOR SPECIALTY PUTTERS Brand

True Temper

Model #

STPF

Description

Usage

Stepless Flared Putter

Fits select OEM putters requiring a flare tip shaft fitting over a post such as Ping and classic models like Titleist Bullseye, Arnold Palmer and Wilson 8802.

Getting Started 1 Organize components The first step to accurate and efficient clubmaking is to organize all the components and small parts necessary to build a club or an entire set. Place the heads, shafts, grips, ferrules and any other small parts on a clean surface to ensure that all the required components are present to complete the job.

2 Mark shafts for trimming Find the shaft(s) in the catalog that you will be using. In the specification box it will state the appropriate trimming chart and any relevant shaft notes. Then consult the shaft trimming charts found in the back of this catalog. On a piece of paper, write down the proper amount to tip trim for each club. Use a small ruler and felt tip pen, mark the position to be tip trimmed (if necessary) onto the shaft. Also, mark the butt end with the felt tip pen with the appropriate clubhead number for easy identification.

3 Tip trim each shaft When working with steel shafts, a tubing cutter can be used for trimming. For graphite shafts, a Grit Edge Blade can be mounted onto any hacksaw frame. Never use a tubing cutter on graphite. If you have a bench grinder, an abrasive cut-off wheel can cut any shaft material. Remember, when using any motorized equipment, make sure to used proper eye protection. Most importantly, to avoid costly mistakes, double-check your trimming amounts before cutting each shaft.

4 Prepare Shaft Tip To ensure a secure bond, it is necessary to abrade the tip of the shaft before assembly. To do this, use a 1” strip of coarse grit sandpaper to roughen the chrome on the tip of steel shafts. For graphite shafts, simply remove only the shiny coating and paint from the tip of the shaft. A belt sander can be used to speed up the process. Special belts are made strictly for graphite shafts. Test fit the shaft into the hosel. In the rare event the shaft does not fit, do not sand extra from the tip, rebore the hosel larger.

5 Install the ferrule Most clubheads require a ferrule, or plastic trim piece that provides a transition from the hosel of the clubhead to the shaft. Ferrules are sized to fit either wood or iron shafts. To install: Twist the small end of the ferrule onto the shaft and straighten. Next, using some sort of homemade ferrule tool, push the shaft down to move the ferrule up the shaft. Place the shaft into the hosel and tap down the butt end of the shaft onto a firm surface, while securely holding the head. This will drive the ferrule to it’s final position.

How to Build A Golf Club 6 Mix and apply epoxy

Mix your 24 hour, 2-part shafting epoxy according to directions. Stir the epoxy until it has an even consistency. Quick cleanup tip: mix small amounts of epoxy on a piece of paper or tape then discard the paper or tape when you are finished. You don’t have to use large amounts of epoxy to achieve a secure bond. To apply, spin the tip of the shaft in epoxy until you have a thin coating on the shaft tip. Then, while spinning the shaft into the club’s hosel using an up and down motion, this will ensure an even consistency. Thoroughly clean excess epoxy.

7 Mark butt end of shaft Using a 48” clubmaking ruler, measure the club for it’s final length. Position the club down on the ground with it the club sitting in playing position. Position the 48” ruler by resting it on the ground by the heel of the club and up along the backside of the shaft. Mark the length of the club on the shaft with a felt tip marker. Remember to leave 1/8” for the grip cap.

8 Butt trim each shaft When working with steel shafts, a tubing cutter can be used for trimming. For graphite shafts, a Grit Edge Blade can be mounted onto any hacksaw frame. Never use a tubing cutter on graphite. If you have a bench grinder, an abrasive cut-off wheel can cut any shaft material. Remember, when using any motorized equipment, make sure to used proper eye protection. Most importantly, to avoid costly mistakes, double-check your trimming amounts before cutting each shaft.

9 Install the grip and clean up We can only show a brief tutorial on how to assemble a golf club on this page. For a much more thorough explanation on the proper assembly of golf clubs, including swingweighting and bending of irons, consult the Modern Guide to Clubmaking book. Assembling your own golf clubs can be both fun and rewarding, not to mention that it can help save you money over purchasing name brand clubs.

GRAPHITE SHAFTS True Ace

Death Stick HS527

Blue Crush HS622

Green Ghost HS6837

Orange Ion HS671

Available WR, WS

Available WRS

Red Storm Hybrid GS282B Available IRS

Death Stick An extremely lightweight and stable design that performs like shafts costing many times more. Constructed from ultra high modulus materials, the Death Stick allows you to go aggressively after the ball without sacrificing accuracy. Leave your playing partners staring at how far you just nailed it. Blue Crush The lightweight True Ace Blue Crush is specifically designed with an ultra-low torque which provides tip stable performance for larger headed drivers. Green Ghost The Green Ghost provides high performance with a higher launch angle for a more active feel and greater air time. Low torque and lightweight design produces long accurate shots. Orange Ion The Orange Ion is a premium graphite shaft tailored to the stronger golfer. Tour trajectory provides a strong boring ball flight, and the low torque and quality construction produces consistent results time after time. Pink Diamond A high performance graphite shaft designed specifically for ladies. Ultra-lightweight performance is excellent for any lady golfer. Red Storm Hybrid The Red Storm Hybrid Shaft is specially designed for the increasingly popular hybrid clubs. Featuring a tip stable, low torque design for increased accuracy.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Death Stick Wood - R Death Stick Wood - S

HS527-001-WR HS527-001-WS

Wood Wood

R S

56 g 56 g

5.0° 4.7°

0.595" 0.595"

0.335" 0.335"

46" 46"

5.5" 4.5"

Mid Mid

G G

Blue Crush Wood - R/S

HS622-001-WRS

Wood

R/S

65 g

3.3°

0.600"

0.335"

46"

3.5"

Low

R:ZB | S:ZC

Green Ghost Wood - R/S

HS6837-001-WRS

Wood

R/S

67 g

4°

0.615"

0.335"

46"

3.5"

Mid-High

R:ZB | S:ZC

Orange Ion Wood - R/S

HS671-001-WRS

Wood

R/S

69 g

3.9°

0.625"

0.335"

46"

Low-Mid

R:ZB | S:ZC

Red Storm Hybrid - R/S

GS282B-001-IRS

Hybrid

R/S

85 g

2.8°

0.600"

0.370"

41"

Low-Mid

R:GG | S:JJ

Proper Method of Cutting Graphite and Steel Shafts

When assembling a variety of golf clubs, clubmakers could potentially encounter shafts made from many different materials. Metal shafts can be cut with a variety of tools, from a simple tubing cutter to a motorized device such as an abrasive cut-off saw. In contrast, graphite and compositetype shafts are best cut by abrasive cutting devices to prevent splintering the shafts. Which tool or method is used will be dependent on what level of tool investment has been made in the shop, as well as what shaft materials are going to be cut.

Graphite, Fiberglass, or Composites Hacksaw with grit edge blade or rod saw blade, abrasive cut-off wheel, high-speed rotary tool, motorized chop saw Standard Weight Steel / Lightweight Steel Tube cutter, high-speed rotary tool, abrasive cut-off wheel, motorized chop saw

Ultra-Lightweight Steel High-speed rotary tool, abrasive cut-off wheel, motorized chop saw Titanium, Aluminum Tube cutter, high-speed rotary tool, abrasive cut-off wheel, motorized chop saw

GRAPHITE SHAFTS CADENCE

HS5827A Cadence Blue Ultralight 60

GS903A Cadence Blue Iron/Hybrid

Available WAL, WRS

Available IAL, IRS

Cadence Orange Ultralight 65 HS672A

Cadence Orange Fairway 70 GS25656A

Cadence Orange Hybrid 75 FW80H2A

Cadence Orange Iron 75 GS256561A

Available WRS

Available IRS

Cadence Red Ultralight 65 HS623A

Cadence Red Fairway 80 HS903A

Cadence Red Hybrid 80 GS287A

Cadence Red Iron 85 GS904

Available WRS

Available iRS

Cadence Blue The Blue series is designed for golfers with smoother swings or those seeking slightly higher launch conditions without sacrificing control. The wood shaft is suitable for drivers and fairway woods and the iron shaft serves double-duty by making an excellent hybrid shaft as well. The lower frequency (stiffness) and low torque provide a uniquely soft feel, yet proving high performance results. Cadence Orange The Orange series provides a nice balance of distance and control with players of average strength and tempo. Based on models of the past with proven track records, these four shafts bundled together form a cohesive line consisting of driver, fairway, hybrid and iron shafts that can be easily mixed and matched to create a seamless custom set. Medium tip stiffness in each model produces a mid launch angle. Cadence Red The Red series is designed for the harder-hitting golfers to provide additional control. Heavier weight and/or increased stiffness help to provide incredible stability for golfers that may have faster swing speeds or quicker and more aggressive tempos. Four distinct shafts in the series start with a stiffer-tipped, ultra-lightweight driver shaft. The fairway, hybrid and iron shafts all are heavier counterparts possessing the same stiffer tip section for greater control and slightly lower launch conditions.

Description

Model #

Cadence Blue 60 Wood - A/L Cadence Blue 60 Wood - R/S

HS5827A-001-WAL HS5827A-001-WRS

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Wood Wood

A/L R/S

63 g 63 g

4.8° 4.5°

0.600" 0.600"

0.335" 0.335"

46" 46"

5.5" 5.5"

High High

L:F | A:D R:F | S:D

Cadence Blue Iron/Hy - A/L Cadence Blue Iron/Hy - R/S

GS903A-001-IAL GS903A-001-IRS

Iron Iron

A/L R/S

81 g 88 g

3.5° 2.7°

0.600" 0.600"

0.370" 0.370"

41" 41"

5.5" 5.5"

High High

L:GG | A:JJ R:GG | S:JJ

Cadence Orange 65 Wood - R/S

HS672A-001-WRS

Wood

R/S

72 g

3.9°

0.630"

0.335"

46"

Mid

R:ZB | S:ZC

Cadence Orange Fairway 70 - R/S

GS25656A-001-WRS

Fairway

R/S

82 g

5.8°

0.600"

0.335"

45"

Mid

R:M | S:V

Cadence Orange Hybrid 75 - R/S

FW80H2A-001-IRS

Hybrid

R/S

83 g

3.7°

0.600"

0.370"

42"

5.5"

Mid

R:GG | S:JJ

Cadence Orange Iron 75 - R/S

GS256561A-001-IRS

Iron

R/S

85 g

3.5°

0.600"

0.370"

41"

5.5"

Mid

R:DD | S:PP

Cadence Red Ultralight 65 - R/S

HS623A-001-WRS

Wood

R/S

69 g

3.3°

0.600"

0.335"

46"

Low-Mid

R:ZB | S:ZC

Cadence Red Fairway 80 - R/S

HS903A-001-WRS

Fairway

R/S

89 g

3.9°

0.615"

0.335"

45"

Low-Mid

R:L | S:M

Cadence Red Hybrid 80 - R/S

GS287A-001-IRS

Hybrid

R/S

88 g

3.3°

0.600"

0.370"

41"

5.5"

Low-Mid

R:GG | S:JJ

Cadence Red Iron 85 - R/S

GS904-001-IRS

Iron

R/S

89 g

3.1°

0.605"

0.370"

40"

5.5"

Low-Mid

R:DD | S:PP

WHITE, LIGHT, AND NICELY PRICED The best-selling Acer Velocity graphite series is now available in hot new white NEW ACER VELOCITY GRAPHITE WHITE One of the features of graphite shafts, aside from their lightweight nature and ability create more diverse products than steel, is that they come in a variety colors to match the cosmetics of virtually any clubhead and / or shaft combination. Coloring is important for other factors as well. It is one of the reasons why major shaft and club manufacturers spend considerably time and thought in devising a color scheme that consumers can spots in the few seconds they are shown on TV. Color is also important from a marketing perspective. Color coordinating the shaft with the colors in the head and grip provides shelf appeal for retailers to make it stand out from the crowd. But one of the forgotten elements of color is the psychology behind the colors. Lighter colors give the impression that what you are holding appears not as heavy. Today, that is especially important when the trend is toward ultra-lightweight. The Acer brand has quite a few different models to choose from and the Acer Velocity White gives one more option from the seven on the color palette for consumers and custom clubmakers to choose from.

GRAPHITE SHAFTS ACER VELOCITY

Acer Velocity White GS100653

Acer Velocity Black GS10065

Acer Velocity Blue GS100651

Acer Velocity Red GS100652

Acer Velocity Silver GS10065L1

Acer Velocity Pink GS10065L

Acer Velocity Light Blue GS10065L2

Available IAL, IRS WAL, WRS

Available IAL, WAL

Acer Velocity Acer Velocity graphite shafts are designed with a higher kick point for optimum trajectory, and flexed just right for added distance in every swing. Available in seven popular colors, the Acer Velocity shafts are a great match for any clubhead.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Acer Velocity White Iron - A/L Acer Velocity White Iron - R/S Acer Velocity White Wood - A/L Acer Velocity White Wood - R/S

GS100653-001-IAL GS100653-001-IRS GS100653-001-WAL GS100653-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

66 g 69 g 66 g 68 g

4° 4° 6° 6°

0.580" 0.580" 0.595" 0.595"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 6" 6"

High High High High

L:GG | A:JJ R:GG | S:JJ L:D5 | A:H5 R:D5 | S:H5

Acer Velocity Black Iron - A/L Acer Velocity Black Iron - R/S Acer Velocity Black Wood - A/L Acer Velocity Black Wood - R/S

GS10065-001-IAL GS10065-001-IRS GS10065-001-WAL GS10065-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

66 g 69 g 66 g 68 g

4° 4° 6° 6°

0.580" 0.580" 0.595" 0.595"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 6" 6"

High High High High

L:GG | A:JJ R:GG | S:JJ L:D5 | A:H5 R:D5 | S:H5

Acer Velocity Blue Iron - A/L Acer Velocity Blue Iron - R/S Acer Velocity Blue Wood - A/L Acer Velocity Blue Wood - R/S

GS100651-001-IAL GS100651-001-IRS GS100651-001-WAL GS100651-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

66 g 69 g 66 g 68 g

4° 4° 6° 6°

0.580" 0.580" 0.595" 0.595"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 6" 6"

High High High High

L:GG | A:JJ R:GG | S:JJ L:D5 | A:H5 R:D5 | S:H5

Acer Velocity Red Iron - A/L Acer Velocity Red Iron - R/S Acer Velocity Red Wood - A/L Acer Velocity Red Wood - R/S

GS100652-001-IAL GS100652-001-IRS GS100652-001-WAL GS100652-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

66 g 69 g 66 g 68 g

4° 4° 6° 6°

0.580" 0.580" 0.595" 0.595"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 6" 6"

High High High High

L:GG | A:JJ R:GG | S:JJ L:D5 | A:H5 R:D5 | S:H5

Acer Velocity Silver Iron - A/L Acer Velocity Silver Iron - R/S Acer Velocity Silver Wood - A/L Acer Velocity Silver Wood - R/S

GS10065L1-001-IAL GS10065L1-001-IRS GS10065L1-001-WAL GS10065L1-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

66 g 69 g 66 g 68 g

4° 4° 6° 6°

0.580" 0.580" 0.595" 0.595"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 6" 6"

High High High High

L:GG | A:JJ R:GG | S:JJ L:D5 | A:H5 R:D5 | S:H5

Acer Velocity Pink Iron - A/L Acer Velocity Pink Wood - A/L

GS10065L-001-IAL GS10065L-001-WAL

Iron Wood

A/L A/L

66 g 66 g

4° 6°

0.580" 0.595"

0.370" 0.335"

40" 46"

5.5" 6"

High High

L:GG | A:JJ L:D5 | A:H5

Acer Velocity Lt. Blue Iron - A/L Acer Velocity Lt. Blue Wood - A/L

GS10065L2-001-IAL GS10065L2-001-WAL

Iron Wood

A/L A/L

66 g 66 g

4° 6°

0.580" 0.595"

0.370" 0.335"

40" 46"

5.5" 6"

High High

L:GG | A:JJ L:D5 | A:H5

GRAPHITE SHAFTS power play

dynacraft

ibella

Power Play Adrenaline GS256551

Power Play System Q GS6862

Dynacraft Super Collider GS256542

iBella Bellissima HSG6012

iBella Obsession HSG60611

Available IAL, IRS WAL, WRS

Available IL, WL

Power Play Adrenaline Ultralight wood shaft for added distance and mid weight iron shaft for added control, the Power Play Adrenaline gives you the proper set of specifications you need when going for it under pressure. These combo-flex shafts are designed to fit a wide range of players and skill levels. Power Play System Q Featuring a lightweight, mid-torque design, the Power Play System Q shaft will fit golfers of all skill levels. Dynacraft Super Collider This golf ball accelerating shaft is designed to fit a wide range of players with providing the right amount of weight and flex for additional distance, control and feel. The unique 360 degree graphics allow the shaft to be aligned in any position and look aligned; perfect for clubmakers who conduct their shaft alignment and especially for installation in the Dynacraft Prophet ICT adjustable driver series. iBella Bellissima These are the perfect complement to match with the iBella Bellissima family of clubheads. The softer tip section helps increase trajectory coupled with the ultra lightweight design for added speed and more importantly added distance. iBella Obsession Created especially for the iBella Obsession collection, this very lightweight, flexible design creates added distance and feel for today’s woman golfer.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Power Play Adrenaline Iron - A/L Power Play Adrenaline Iron - R/S Power Play Adrenaline Wood - A/L Power Play Adrenaline Wood - R/S

GS256551-001-IAL GS256551-001-IRS GS256551-001-WAL GS256551-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

76 g 82 g 61 g 64 g

4° 3.5° 6° 6°

0.580" 0.600" 0.580" 0.590"

0.370" 0.370" 0.335" 0.335"

41" 41" 46" 46"

5.5" 5.5" 6" 6"

Mid Mid Mid-High Mid-High

L:DD | A:LL R:DD | S:PP L:F | A:D R:D | S:H

Power Play System Q Iron - A/L Power Play System Q Iron - R/S Power Play System Q Wood - A/L Power Play System Q Wood - R/S

GS6862-001-IAL GS6862-001-IRS GS6862-001-WAL GS6862-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

66 g 69 g 66 g 68 g

4° 4° 6° 6°

0.580" 0.580" 0.590" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 6" 6"

High High High High

L:GG | A:JJ R:GG | S:JJ L:D | A:H R:D | S:H

Dynacraft Super Collider Iron - A/L Dynacraft Super Collider Iron - R/S Dynacraft Super Collider Wood - A/L Dynacraft Super Collider Wood - R/S

GS256542-001-IAL GS256542-001-IRS GS256542-001-WAL GS256542-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

76 g 82 g 61 g 64 g

4° 3.5° 6° 6°

0.580" 0.600" 0.580" 0.590"

0.370" 0.370" 0.335" 0.335"

41" 41" 46" 46"

5.5" 5.5" 6" 6"

Mid Mid Mid-High Mid-High

L:DD | A:LL R:DD | S:PP L:F | A:D R:D | S:H

iBella Bellissima Iron - L iBella Bellissima Wood - L

HSG6012-001-IL HSG6012-001-WL

Iron Wood

L L

63 g 63 g

4.5° 6.5°

0.580" 0.580"

0.370" 0.335"

40" 46"

5" 5"

High High

GG E

iBella Obsession - Iron A/L iBella Obsession - Wood A/L

HSG60611-001-IAL HSG60611-001-WAL

Iron Wood

A/L A/L

60 g 60 g

4.5° 6.3°

0.570" 0.580"

0.370" 0.335"

40" 46"

5.5" 6"

High High

L:GG | A:JJ L:D | A:H

tour gear

powerflex

tour series

Tour Gear Renaissance FW9502

Powerflex FW501 FW46

Powerflex FW114 FW11413

Available IAL, IRS WAL, WRS

Available IRS, WRS

Available IAL, IRS WAL, WRS

Tour Series Commercial Grade CGG

Tour Series Junior CS200 Available I, W

Available I, W

Tour Gear Renaissance An economical shaft for beginning and intermediate golfers designed with a heavier weight to quell a quick tempo and provide much needed accuracy and control. Powerflex FW501 The Powerflex FW 501 features filament wound construction, so there is no spline and is extremely consistent around the circumference of the shaft. Powerflex FW114 The Powerflex FW 114 is a value priced shaft designed for mid to high handicappers. Tour Series Commercial Grade Tour Series Commercial Grade shafts are an outstanding price point alternative. In simple and clean black/gold cosmetics. Tour Series Junior Specifically designed for juniors. A more flexible fiberglass composite provides the soft flex to help get the ball airborne.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Tour Gear Renaissance Iron - A/L Tour Gear Renaissance Iron - R/S Tour Gear Renaissance Wood - A/L Tour Gear Renaissance Wood - R/S

FW9502-001-IAL FW9502-001-IRS FW9502-001-WAL FW9502-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

80 g 80 g 81 g 81 g

6° 6° 7° 7°

0.595” 0.595” 0.595” 0.595”

0.370” 0.370” 0.335” 0.335”

40” 40” 46” 46”

5” 5” 6” 6”

Mid Mid Mid Mid

L:GG | A:JJ R:GG | S:JJ L:D | A:H R:D | S:H

Powerflex FW501 Iron - R/S Powerflex FW501 Wood - R/S

FW46-001-IRS FW46-001-WRS

Iron Wood

R/S R/S

86 g 85 g

3.5° 6°

0.600" 0.600"

0.370" 0.335"

40" 46"

6" 6"

Low-Mid Low-Mid

R:GG | S:JJ R:D | S:H

Powerflex FW114 Iron - A/L Powerflex FW114 Iron - R/S Powerflex FW114 Wood - A/L Powerflex FW114 Wood - R/S

FW11413-001-IAL FW11413-001-IRS FW11413-001-WAL FW11413-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

100 g 114 g 100 g 106 g

7° 6° 9° 8.5°

0.590" 0.590" 0.600" 0.600"

0.370" 0.370" 0.335" 0.335"

41" 41" 46" 46"

5.5" 5" 6" 5.5"

Mid-High Mid-High Mid-High Mid-High

L:GG | A:JJ R:GG | S:JJ L:D | A:H R:D | S:H

Tour Series Commercial Grade Iron Tour Series Commercial Grade Wood

CGG-001-I CGG-001-W

Iron Wood

0.370" 0.335"

39" 45"

Tour Series Junior Iron Tour Series Junior Wood

CS200-001-I CS200-001-W

Iron Wood

0.370" 0.335"

37" 40"

72 g 72 g Jr. Jr.

72 g 72 g

0.500" 0.500"

GG D 5" 7"

High High

FF A

GRAPHITE SHAFTS apollo acculite

new for 2011 apollo acculite graphite series

The Acculite Graphite is a comprehensive, premium shaft series designed to fit a wide array of golfers and clubhead designs. The entire series comprises of mid-launching filamentwound shafts that exhibit unprecedented consistency around the total circumference of the shaft for precision control. Weights range from sub 50-grams for ultra-light and ultra-long drivers for increased distance to progressively heavier weight models designed for stronger golfer or those seeking more control in the fairway woods and irons.

Acculite 45 APGAC45

Acculite 50 APGAC50

Acculite 60 APGAC60

Acculite 70 APGAC70

Acculite 80 APGAC80

Available WL

Available WR, WS

Available IL, IR, IS WL, WR, WS

Available IR, IS, WR, WS

Acculite Graphite 45/50 Series Apollo has redefined sub ultra-lightweight technology by creating an unbelievable light weight, yet stable design. The high modulus material is filament wound around a special forming mandrel with a reduced tapered profile to create the necessary strength and unprecedented consistency around the total circumference of the shaft. The result a medium or flatter trajectory compared to other shafts in their weight class for greater speed at impact for exceptional distance, control and accuracy even at extended lengths. Acculite Graphite 60 Series Apollo’s signature series combines premium materials in a lightweight design well suited for an exceptional combination of distance and feel for a wide array of golfers. Acculite Graphite 70 Series Designed for golfers who seek a balance of distance and control, the filament wound construction bestows superior consistency with a firm, yet responsive feel throughout the swing and upon impact. Acculite Graphite 80 Series The heavier weight series geared for more aggressive golfers when control comes at a premium. The wood shafts make viable fairway wood shafts that can be mixed and matched with others in the series to provide seamless set.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Acculite Graphite 45 Wood - L

APGAC45-001-WL

Wood

47 g

7°

0.585"

0.335"

46"

Mid

Acculite Graphite 50 Wood - R Acculite Graphite 50 Wood - S

APGAC50-001-WR APGAC50-001-WS

Wood Wood

R S

54 g 54 g

5.5° 5.5°

0.605" 0.610"

0.335" 0.335"

46" 46"

4" 4"

Mid Mid

F F

Acculite Graphite 60 Iron - L Acculite Graphite 60 Iron - R Acculite Graphite 60 Iron - S Acculite Graphite 60 Wood - L Acculite Graphite 60 Wood - R Acculite Graphite 60 Wood - S

APGAC60-001-IL APGAC60-001-IR APGAC60-001-IS APGAC60-001-WL APGAC60-001-WR APGAC60-001-WS

Iron Iron Iron Wood Wood Wood

L R S L R S

60 g 63 g 63 g 60 g 61 g 61 g

2.8° 2.8° 2.8° 4.9° 4.9° 4.9°

0.585" 0.605" 0.605" 0.585" 0.600” 0.600”

0.370" 0.370" 0.370" 0.335" 0.335" 0.335"

40" 40" 40" 46" 46" 46"

4" 4" 4" 4" 4" 4"

Mid Mid Mid Mid Mid Mid

GG GG GG F F F

Acculite Graphite 70 Iron - R Acculite Graphite 70 Iron - S Acculite Graphite 70 Wood - R Acculite Graphite 70 Wood - S

APGAC70-001-IR APGAC70-001-IS APGAC70-001-WR APGAC70-001-WS

Iron Iron Wood Wood

R S R S

73 g 75 g 73 g 73 g

5° 5° 5.5° 5.5°

0.580" 0.580" 0.600" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5" 5" 5" 5"

Mid Mid Mid Mid

GG GG F F

Acculite Graphite 80 Iron - R Acculite Graphite 80 Iron - S Acculite Graphite 80 Wood - R Acculite Graphite 80 Wood - S

APGAC80-001-IR APGAC80-001-IS APGAC80-001-WR APGAC80-001-WS

Iron Iron Wood Wood

R S R S

81 g 83 g 81 g 83 g

3.5° 3.5° 5° 5°

0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5" 5" 5" 5"

Mid Mid Mid Mid

GG GG F F

GRAPHITE SHAFTS apollo balistik

apollo shadow

Balistik APGBAL

Shadow Graphite APGSH

Available I, W

Available IAL, IRS WAL, WRS

Shadow UL APGSHUL

Shadow Junior APGSHJR

Available IAL, IRS WAL, WRS

Available I, W

Balistik The Balistik is a clubmaker’s dream. Trim up to four distinct flexes giving you the ultimate in clubmaking flexibility! Mid torque and mid weight design fits the majority of players. Shadow Graphite The Apollo Shadow is a 100% graphite shaft well suited for the mid handicapper. Apollo performance in a mid torque and mid weight design allows you to fit the majority of players. Shadow Filament Wound Filament wound construction eliminates the wobble found in many sheet wrapped shafts providing superior consistency from shaft to shaft. Shadow UL The Shadow UL is an excellent ultralight graphite shaft designed for the mid handicapper. Light 62g weight allows for faster swing speeds, while the mid torque provides accuracy without feeling too harsh. Shadow Hybrid The Apollo Shadow Hybrid is designed specifically for hybrid shafts. Featuring a low torque, tip stable design and a higher launch angle to get the ball up in the air quickly. Shadow Junior Designed specifically for juniors, the Shadow Junior Graphite features a super flexible design to help get the ball up. The 0.500” butt fits most junior grips.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Par.

Ball Flight

Trim Code

Balistik Iron - Multiflex Balistik Wood - Multiflex

APGBAL-001-I APGBAL-001-W

Iron Wood

S/R/A/L S/R/A/L

86 g 86 g

4.6° 5.4°

0.600" 0.600"

0.370" 0.335"

47" 52"

13" 12"

Mid Mid

L:DD | A:LL | R:MM | S:NN L:I | A:J | R:P | S:S

Shadow Graphite Iron - A/L Shadow Graphite Iron - R/S Shadow Graphite Wood - A/L Shadow Graphite Wood - R/S

APGSH-001-IAL APGSH-001-IRS APGSH-001-WAL APGSH-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

78 g 78 g 78 g 78 g

4.5° 4.5° 5.5° 5.5°

0.580" 0.600" 0.580" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

6" 6" 6" 6"

Mid Mid Mid Mid

L:GG | A:JJ R:GG | S:JJ L:D | A:H R:D | S:H

Shadow UL Iron - A/L Shadow UL Iron - R/S Shadow UL Wood - A/L Shadow UL Wood - R/S

APGSHUL-001-IAL APGSHUL-001-IRS APGSHUL-001-WAL APGSHUL-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

62 g 62 g 62 g 62 g

4.5° 4.5° 5° 5°

0.580" 0.600" 0.580" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 40" 46" 46"

5.5" 5.5" 5.5" 5.5"

Mid Mid Mid Mid

L:GG | A:JJ R:GG | S:JJ L:D | A:H R:D | S:H

Shadow Junior Iron Shadow Junior Wood

APGSHJR-001-I APGSHJR-001-W

Iron Wood

Jr. Jr.

70 g 70 g

0.500" 0.500"

0.370" 0.335"

34" 37"

5" 7"

High High

FF A

aldila RIP

RIP 60 ALRIP60

RIP 70 ALRIP70

RIP Hybrid ALRIPHY

Available WR, WS, WX

Available IR, IS, IX

RIP The Aldila RIP employs patent-pending technology and exclusive materials to completely transform shaft design from the inside out. The result is a revolutionary shaft with optimum flex and torque characteristics with incredible feel. In addition, the hoop strength, or cross-sectional stability of the shaft is also increased to provide greater shaft stability near the clubhead.

What is S-Core?

Aldila’s patented S-core Technology dramatically stabilizes the shaft’s cross-section through the use of an internal carbon-fiber rib system. S-core Technology (featured in found in the R.I.P., VooDoo, NV VooDoo series) increases the hoop stiffness by 80% over conventional graphite and as much as 60% over competitors’ attempts at cross-sectional stabilization. That increased stability allows these select shafts to better resist shaft ovaling and deformation during the swing -thus maximizing energy transfer to the ball and yielding unparalleled distance and accuracy. And because the shaft’s symmetry is maintained throughout the swing, it loads and unloads more consistently, enabling you to more reliably deliver the club head to the ball every swing.

GRAPHITE SHAFTS aldila voodoo

aldila nv voodoo

Voodoo 60 ALVOOD60

Voodoo 75 ALVOOD75

Voodoo Hybrid ALVOODHY

NV Voodoo 60 ALNVVD60

NV Voodoo 75 ALNVVD75

Available WR, WS, WX

Available WR, WS

Voodoo The Aldila Voodoo gives you more distance. How? By increasing the cross-sectional stiffness, the degree of cross-sectional deformation (ovaling) is reduced, thus more energy is stored in pure bending and released into the ball at impact. The Voodoo is based on the VS Proto profile but with their patented S-Core technology. NV Voodoo The Aldila NV Voodoo is based upon the popular NV profile but supplemented with their patented S-Core internal structure to increase energy efficiency to the ball.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

RIP 60 Wood - R RIP 60 Wood - S RIP 60 Wood - X

ALRIP60-001-WR ALRIP60-001-WS ALRIP60-001-WX

Wood Wood Wood

R S X

62 g 63 g 70 g

3.6° 2.9° 2.8°

0.595" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Low-Mid Low-Mid Low-Mid

W3 W3 W3

RIP 70 Wood - R RIP 70 Wood - S RIP 70 Wood - X

ALRIP70-001-WR ALRIP70-001-WS ALRIP70-001-WX

Wood Wood Wood

R S X

73 g 74 g 76 g

3.2° 2.6° 2.5°

0.605" 0.605" 0.605"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Low-Mid Low-Mid Low-Mid

W3 W3 W3

RIP Hybrid - R RIP Hybrid - S RIP Hybrid - X

ALRIPHY-001-IR ALRIPHY-001-IS ALRIPHY-001-IX

Hybrid Hybrid Hybrid

R S X

86 g 90 g 89 g

2.2° 2° 1.8°

0.610" 0.610" 0.615"

0.370" 0.370" 0.370"

42" 42" 42"

3" 3" 3"

Low-Mid Low-Mid Low-Mid

SS SS SS

Voodoo 60 Wood - R Voodoo 60 Wood - S Voodoo 60 Wood - X

ALVOOD60-001-WR ALVOOD60-001-WS ALVOOD60-001-WX

Wood Wood Wood

R S X

65 g 66 g 68 g

4.2° 3.4° 3.2°

0.630" 0.630" 0.630"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Mid Mid Mid

W3 W3 W3

Voodoo 75 Wood - R Voodoo 75 Wood - S Voodoo 75 Wood - X

ALVOOD75-001-WR ALVOOD75-001-WS ALVOOD75-001-WX

Wood Wood Wood

R S X

74 g 76 g 78 g

3.9° 3.2° 2.8°

0.630" 0.630" 0.630"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Mid Mid Mid

W3 W3 W3

Voodoo Hybrid - R Voodoo Hybrid - S

ALVOODHY-001-IR ALVOODHY-001-IS

Hybrid Hybrid

R S

90 g 90 g

3.4° 2.8°

0.630" 0.630"

0.370" 0.370"

42" 42"

3" 3"

Mid Mid

SS SS

NV Voodoo 60 Wood - R NV Voodoo 60 Wood - S

ALNVVD60-001-WR ALNVVD60-001-WS

Wood Wood

R S

73 g 73 g

4° 3.2°

0.630" 0.630"

0.335" 0.335"

46" 46"

3" 3"

Mid Mid

W3 W3

NV Voodoo 75 Wood - R NV Voodoo 75 Wood - S

ALNVVD75-001-WR ALNVVD75-001-WS

Wood Wood

R S

81 g 82 g

3.5° 2.8°

0.625" 0.625"

0.335" 0.335"

46" 46"

3" 3"

Mid Mid

W3 W3

GRAPHITE SHAFTS ALDILA VS PROTO

VS Proto 60 ALVS60

VS Proto 70 ALVS70

VS Proto 80 ALVS80

Available WR, WS

VS Proto Hybrid 80 ALVS80HY

VS Proto Hybrid 95 ALVS95HY

Available IR, IS

VS Proto The VS Proto Series feature Aldila’s exclusive Next-Generation Micro Laminate Technology. Carbon Nano-Tubes, combined with Aldila’s proprietary A65 Performance Resin System, utilizing Advanced Ultra High Modulus graphite fibers, all synthesized into Micro Laminate Technology. Unparalleled performance and feel for those seeking superior distance and a lower, more controllable ball flight.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

VS Proto 60 Wood - R VS Proto 60 Wood - S

ALVS60-001-WR ALVS60-001-WS

Wood Wood

R S

63 g 63 g

3.2° 3.2°

0.600" 0.600"

0.335" 0.335"

46" 46"

3" 3"

Low-Mid Low-Mid

W3 W3

VS Proto 70 Wood - R VS Proto 70 Wood - S

ALVS70-001-WR ALVS70-001-WS

Wood Wood

R S

71 g 71 g

2.8° 2.8°

0.600" 0.600"

0.335" 0.335"

46" 46"

3" 3"

Low-Mid Low-Mid

W3 W3

VS Proto 80 Wood - R VS Proto 80 Wood - S

ALVS80-001-WR ALVS80-001-WS

Wood Wood

R S

81 g 81 g

2.2° 2.2°

0.600" 0.600"

0.335" 0.335"

46" 46"

3" 3"

Low-Mid Low-Mid

W3 W3

VS Proto Hybrid 80 - R VS Proto Hybrid 80 - S

ALVS80HY-001-IR ALVS80HY-001-IS

Hybrid Hybrid

R S

82 g 82 g

2.0° 2.0°

0.630" 0.630"

0.370" 0.370"

42" 42"

3" 3"

Low-Mid Low-Mid

SS SS

VS Proto Hybrid 95 - R VS Proto Hybrid 95 - S

ALVS95HY-001-IR ALVS95HY-001-IS

Hybrid Hybrid

R S

94 g 94 g

1.4° 1.4°

0.630" 0.630"

0.370" 0.370"

42" 42"

3" 3"

Low-Mid Low-Mid

SS SS

GRAPHITE SHAFTS aldila dvs

ALDILA en fuego

DVS 60 ALDVS60

DVS 90 Hybrid ALDVS90HY

Serrano ALSERR

Wasabi ALWASA

Habanero ALHABA

Serrano Hybrid ALSERRHY

Available WR, WS

Available IR, IS

Available WR, WS, WX

Available IR, IS, IX

En Fuego Series The En Fuego shafts feature unique balance, weight, torque, and flex properties designed to maximize the energy of your swing. The innovative high center of gravity increases the performance of today’s modern clubhead designs. DVS The DVS features an innovative, new responsive tip design for extra kick at impact with an optimum launch. Stabilized with a unique flex profile and very low torque – distance is maximized. Aldila’s revolutionary Micro Laminate Technology, enhanced with carbon nanotubes, provides for perfect feel. High performance technology harnessed and perfected into a special blend of weight, torque, flex and feel.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

DVS 60 Wood - R DVS 60 Wood - S

ALDVS60-001-WR ALDVS60-001-WS

Wood Wood

R S

63 g 63 g

3.3° 3.3°

0.625" 0.630"

0.335" 0.335"

46" 46"

3.5" 3.5"

Mid Mid

W3 W3

DVS 95 Hybrid - R DVS 95 Hybrid - S

ALDVS90HY-001-IR ALDVS90HY-001-IS

Hybrid Hybrid

R S

91 g 91 g

1.8° 1.8°

0.625" 0.625"

0.370" 0.370"

42" 42"

3.5" 3.5"

Mid Mid

SS SS

Serrano Wood - R Serrano Wood - S Serrano Wood - X

ALSERR-001-WR ALSERR-001-WS ALSERR-001-WX

Wood Wood Wood

R S X

62 g 63 g 61 g

4.5° 4.2° 4.0°

0.640" 0.640" 0.640"

0.335" 0.335" 0.335"

46" 46" 46"

2.5" 2.5" 2.5"

Low-Mid Low-Mid Low-Mid

W3 W3 W3

Wasabi Wood - R Wasabi Wood - S Wasabi Wood - X

ALWASA-001-WR ALWASA-001-WS ALWASA-001-WX

Wood Wood Wood

R S X

62 g 63 g 61 g

4.5° 4.2° 4.0°

0.640" 0.640" 0.640"

0.335" 0.335" 0.335"

46" 46" 46"

2.5" 2.5" 2.5"

Mid Mid Mid

W3 W3 W3

Habenero Wood - R Habenero Wood - S Habenero Wood - X

ALHABA-001-WR ALHABA-001-WS ALHABA-001-WX

Wood Wood Wood

R S X

60 g 62 g 61 g

5.3° 5.2° 5°

0.640" 0.640" 0.640"

0.335" 0.335" 0.335"

46" 46" 46"

2.5" 2.5" 2.5"

Mid-High Mid-High Mid-High

W3 W3 W3

Serrano Hybrid - R Serrano Hybrid - S Serrano Hybrid - X

ALSERRHY-001-IR ALSERRHY-001-IS ALSERRHY-001-IX

Hybrid Hybrid Hybrid

R S X

91 g 90 g 90 g

1.8° 1.8° 1.8°

0.625" 0.625" 0.625"

0.370" 0.370" 0.370"

42" 42" 42"

2.5" 2.5" 2.5"

Mid Mid Mid

SS SS SS

GRAPHITE SHAFTS ALDILA NV

NV 55 Pink ALNV55P

NV 65 Green ALNV65

NV 75 Green ALNV75

Available WL

Available WR, WS, WX

NV Hybrid 85 Green ALNV85HY

NV Pro Iron 105 Green ALNV105

Available IR, IS

NV The Aldila NV features Aldila’s exclusive Micro Laminate Technology. This new exclusive technology offers the player enhanced performance and feel. The consistent taper and slim profile produces a shaft with consistent performance, flex and feel from the butt-end to the tip and eliminates the dull, boardy feel of other performance shafts on the market. The NV is the leading shaft series on the PGA and Nationwide Tours.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

NV 55 Pink Wood - L

ALNV55P-001-WL

Wood

55 g

4.2°

0.615"

0.335"

46"

Mid

NV 65 Green Wood - R NV 65 Green Wood - S NV 65 Green Wood - X

ALNV65-001-WR ALNV65-001-WS ALNV65-001-WX

Wood Wood Wood

R S X

67 g 67 g 68 g

3.5° 3.5° 3.5°

0.620" 0.625" 0.625"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Low-Mid Low-Mid Low-Mid

W3 W3 W3

NV 75 Green Wood - R NV 75 Green Wood - S NV 75 Green Wood - X

ALNV75-001-WR ALNV75-001-WS ALNV75-001-WX

Wood Wood Wood

R S X

78 g 78 g 79 g

2.8° 2.8° 2.8°

0.620" 0.625" 0.625"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Low-Mid Low-Mid Low-Mid

W3 W3 W3

NV Hybrid 85 Green - R NV Hybrid 85 Green - S

ALNV85HY-001-IR ALNV85HY-001-IS

Iron Iron

R S

84 g 84 g

2.5° 2.5°

0.630" 0.630"

0.370" 0.370"

42" 42"

3" 3"

Low-Mid Low-Mid

SS SS

NV Pro Iron 105 Green - R NV Pro Iron 105 Green - S

ALNV105-001-IR * ALNV105-001-IS *

Iron Iron

R S

105 g 105 g

2.5° 2.4°

0.625” 0.625”

0.370” 0.370”

37” - 41” 37” - 41”

2” 2”

Low-Mid Low-Mid

SS SS

* Aldila NV Pro Iron is sold in individual lengths for #2 iron through wedges.

GRAPHITE SHAFTS ALDILA nvs

NVS 45 PInk ALNVS45P

NVS 55 PInk ALNVS55P

NVS 65 Orange ALNVS65

NVS 75 Orange ALNVS75

Available WL

Available WR, WS

NVS Hybrid 85 Orange ALNVS85HY Available WR, WS

NVS The Aldila NVS features the same unmatched performance and incredible feel of the original NV, with a higher launch. While the NV is a tip-stiff, low launch shaft, the NVS features a more responsive tip for those seeking a higher ball fight.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

NVS 45 PInk Wood - L

ALNVS45P-001-WL

Wood

47 g

5.8°

0.620”

0.335”

46”

3”

Mid-High

NVS 55 PInk Wood - L

ALNVS55P-001-WL

Wood

54 g

4.4°

0.620”

0.335”

46”

3”

Mid

NVS 65 Orange Wood - R NVS 65 Orange Wood - S

ALNVS65-001-WR ALNVS65-001-WS

Wood Wood

R S

67 g 68 g

3.6° 3.6°

0.620” 0.625”

0.335” 0.335”

46” 46”

3” 3”

Mid Mid

W3 W3

NVS 75 Orange Wood - R NVS 75 Orange Wood - S

ALNVS75-001-WR ALNVS75-001-WS

Wood Wood

R S

75 g 75 g

3.2° 3.2°

0.620” 0.625”

0.335” 0.335”

46” 46”

3” 3”

Mid Mid

W3 W3

NVS Hybrid 85 Orange - R NVS Hybrid 85 Orange - S

ALNVS85HY-001-IR ALNVS85HY-001-IS

Hybrid Hybrid

R S

84 g 84 g

2.8° 2.8°

0.630” 0.630”

0.370” 0.370”

42” 42”

3” 3”

Mid Mid

SS SS

SHAFT TERMINOLOGY FLEX The common term given to the relative bending properties of a golf club shaft. Standard designation for flex: L - Ladies A or R2 - Amateur or Senior R - Regular S - Stiff X - Extra Stiff

TORQUE The amount of twist in a shaft under a given amount of force. Lower torque shafts twist less than do higher torque shafts. BUTT DIAMETER Refers to the measurement of the larger end of the shaft (in inches) where the grip is to be installed (for example, .580” or .600”). TIP DIAMETER Refers to the measurement of the smaller end of the shaft (in inches) where the clubhead is to be installed. Standard tip sizes are 0.370” for irons and 0.335” for woods. WEIGHT The weight of the raw shaft before installation. The weight of the shaft has an

effect on swing speed and control. Theoretically, the lighter the shaft, the faster one can swing. However, a shaft that is too light may result in reduced control of the club due to inconsistent tempo. The optimum goal is to find the lightest shaft one can control. LENGTH Refers to the length of a raw, uncut shaft before installation. Not to be confused with CLUBLENGTH, which is the length of the completed club in the address position. TIP PARALLEL The length at which the shaft tip maintains the same tip diameter. Generally indicates how much the tip of the shaft may be

trimmed. BALL FLIGHT A relative indicator of how high the ball will travel in its trajectory. Typically, golfers with slower swing speeds will obtain greater distance with higher ball flight. Conversely, stronger players will maximize distance with a lower ball flight. TRIM CODE The trim code corresponds to suggested trimming instructions to achieve a particular flex for a particular club. For combination flex shafts, the code will be listed to the right of the flex.

GRAPHITE SHAFTS ALDILA value series

VL Black VL

VX Black VX

VL Champagne VLC

VLHybrid VLHY

VX Hybrid VXHY

Available IAL, WAL

Available IRS, WRS

Available IAL, WAL

Available IL, IA

Available IR, IS

Value Series The Aldila Value Series makes entry level graphite shafts more affordable while retaining premium quality & craftsmanship. Made of 100% graphite. VX for regular/stiff combination flex & VL/VLC for ladies/senior combination flex. The new VL/VX hybrids come in individual flexes at extended raw lengths.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

VL Black Iron - A/L VL Black Wood - A/L

VL-001-IAL VL-001-WAL

Iron Wood

A/L A/L

77 g 79 g

4.5° 5.5°

0.580” 0.585”

0.370” 0.335”

41” 46”

7” 7”

High High

L: RR | A: UU L: F | A: H

VX Black Iron - R/S VX Black Wood - R/S

VX-001-IRS VX-001-WRS

Iron Wood

R/S R/S

88 g 87 g

4.5° 5.5°

0.600” 0.600”

0.370” 0.335”

41” 46”

7” 7”

Mid-High Mid-High

R: RR | S: UU R: F | S: H

VL Champagne Iron - A/L VL Champagne Wood - A/L

VLC-001-IAL VLC-001-WAL

Iron Wood

A/L A/L

77 g 79 g

4.5° 5.5°

0.580” 0.585”

0.370” 0.335”

41” 46”

7” 7”

High High

L: RR | A: UU L: F | A: H

VL Hybrid - L VL Hybrid - A

VLHY-001-IL VLHY-001-IA

Hybrid Hybrid

L A

72 g 74 g

2.8° 2.8°

0.590" 0.590"

0.370" 0.370"

42" 42"

5" 5"

High High

SS SS

VX Hybrid - R VX Hybrid - S

VXHY-001-IR VXHY-001-IS

Hybrid Hybrid

R S

76 g 78 g

2.8° 2.8°

0.580" 0.585"

0.370" 0.370"

42" 42"

5" 5"

Mid-High Mid-High

SS SS

PROJECT X GRAPHITE TECHNOLOGY

project x graphite

Zonal Design Theory Project X driver and hybrid shafts are engineered using True Temper’s proprietary Zonal Design Theory (ZDT) which divides the shaft into three zones—butt, mid and tip sections. Each zone is optimized for performance using a specific design technology. Butt section Hex-Axial Reinforcement Technology provides unmatched cross sectional stability minimizing energy lost to ovalization. Mid section Constant Taper Design eliminates localized bending and creates even loading and unloading for maximum energy transfer. Tip section Elongated Double Wrapped 55 MSI Reinforcement for a firmer tip section which minimizes droop and lag and reduces back spin. Tour Launch and Spin Like the Project X iron shafts, Project X driver and hybrid shafts provide penetrating launch conditions with ultra low spin. The stiff butt, soft midsection combine with the double reinforced tip section to maintain a strong angle of attack and greatly reduce spin, even in higher loft drivers. Project X Wood UPJX Available WR+, WS, WS+, WX, WX+

Project X Hybrid UPJXHY

Project X

typical graphite shafts

Available IR+, IS, IS+, IX, IX+

Project X The name that revolutionized steel shafts and won major tournaments around the world just got better. Introducing the new Project X driver and hybrid shafts, the Next Generation in sophisticated Project X engineering. The new Project X driver shaft has a similar bend profile to Project X iron shafts. The driver shaft’s firm tip design yields a penetrating launch and low spin while its low torque and reinforced cross section provide the most stable shaft performance on tour. The new Project X hybrid shaft’s stiffness profile matches Project X iron shafts and its weight provides perfect transition from iron shafts to woods shafts. The hybrid shaft’s bend profile and stability enhancements was designed to reduce both directional and distance dispersion.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Project X Wood - R+ (5.0) Project X Wood - S (5.5) Project X Wood - S+ (6.0) Project X Wood - X (6.5) Project X Wood - X+ (7.0)

UPJX50-001-WR UPJX55-001-WS UPJX60-001-WS UPJX65-001-WX UPJX70-001-WX

Wood Wood Wood Wood Wood

R+ S S+ X X+

60 g 62 g 66 g 69 g 69 g

4.3° 3.7° 3.3° 3.3° 3.3°

0.595" 0.595" 0.600" 0.600" 0.600"

0.335" 0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46" 46"

3" 3" 3" 3" 3"

Mid Mid Mid-Low Low Low

W W W W W

Project X Hybrid - R+ (5.0) Project X Hybrid - S (5.5) Project X Hybrid - S+ (6.0) Project X Hybrid - X (6.5) Project X Hybrid - X+ (7.0)

UPJXHY50-001-IR UPJXHY55-001-IS UPJXHY60-001-IS UPJXHY65-001-IX UPJXHY70-001-IX

Hybrid Hybrid Hybrid Hybrid Hybrid

R+ S S+ X X+

84 g 85 g 92 g 95 g 97 g

3.0° 3.0° 2.3° 2.3° 2.3°

0.595" 0.595" 0.600" 0.600" 0.605"

0.370" 0.370" 0.370" 0.370" 0.370"

42" 42" 42" 42" 42"

3" 3" 3" 3" 3"

Mid Low Low Low Low

II II II II II

GRAPHITE SHAFTS grafalloy booyah

grafalloy prolaunch amp

Booyah GRFMBOO

grafalloy prolaunch axis

ProLaunch AMP GRFMAMP

Available WR, WS, WX

Available WA, WR, WS, WX

ProLaunch Red with Axis Technology GRFMAXR

ProLaunch Blue with Axis Technology GRFMAXB

Available WR, WS, WX

Available WA, WR, WS, WX

ProLaunch Platinum with Axis Technology GRFMAXP Available WA, WR, WS, WX

Booyah The radical superlite design of Grafalloy’s new Booyah shaft brings fun back to the forefront of the game by delivery ultimate distance with maximum ball flight and peak trajectory. ProLaunch AMP Flex Trajectory Technology optimizes ball flight thorughout the flex range based on specific player profiles resulting in higher trajectories in the softer flexes and more penetrating trajectories in the stiffer flexes. ProLaunch with Axis Technology Grafalloy’s Micro-Mesh Tip Design with the Smart-Ply™, which positions ultra-thin layers of fibers along six separate axes increasing the efficiency in energy transfer from the golfer to the ball and reducing off plane bending to keep the head on line for increased accuracy. The ProLaunch Axis Red shaft creates a boring, penetrating ball flight. ProLaunch Axis Blue maximizes distance for players seeking higher launch angles. The ProLaunch Platinum with Axis Technology produces towering drives that flatten quickly offering a penetrating trajectory with optimal spin.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Booyah Wood - R Booyah Wood - S Booyah Wood - X

GRFMBOO-001-WR GRFMBOO-001-WS GRFMBOO-001-WX

Wood Wood Wood

R S X

49 g 49 g 51 g

4° 4° 4°

0.595" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

High High High

G G G

ProLaunch AMP Wood - A ProLaunch AMP Wood - R ProLaunch AMP Wood - S ProLaunch AMP Wood - X

GRFMAMP-001-WA GRFMAMP-001-WR GRFMAMP-001-WS GRFMAMP-001-WX

Wood Wood Wood Wood

A R S X

57 g 58 g 62 g 63 g

4.5° 4° 3.5° 3.3°

0.600" 0.600" 0.600" 0.600"

0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46"

3" 3" 4" 3"

High High Mid Low

W W W W

ProLaunch Red Axis Wood - R ProLaunch Red Axis Wood - S ProLaunch Red Axis Wood - X

GRFMAXR-001-WR GRFMAXR-001-WS GRFMAXR-001-WX

Wood Wood Wood

R S X

62 g 62 g 63 g

3.8° 3.8° 3.8°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Low Low Low

W W W

ProLaunch Blue Axis Wood - A ProLaunch Blue Axis Wood - R ProLaunch Blue Axis Wood - S ProLaunch Blue Axis Wood - X

GRFMAXB-001-WA GRFMAXB-001-WR GRFMAXB-001-WS GRFMAXB-001-WX

Wood Wood Wood Wood

A R S X

58 g 58 g 58 g 60 g

4.5° 4° 4° 4°

0.600" 0.600" 0.600" 0.600"

0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46"

3" 3" 3" 3"

High High High High

W W W W

ProLaunch Platinum Axis Wood - A ProLaunch Platinum Axis Wood - R ProLaunch Platinum Axis Wood - S ProLaunch Platinum Axis Wood - X

GRFMAXP-001-WA GRFMAXP-001-WR GRFMAXP-001-WS GRFMAXP-001-WX

Wood Wood Wood Wood

A R S X

49 g 58 g 65 g 68 g

4° 3.5° 3.3° 3.3°

0.600" 0.600" 0.600" 0.600"

0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46"

4” 4” 4” 4”

Mid-High Mid-High Mid-High Mid-High

G G G G

GRAPHITE SHAFTS grafalloy prolaunch red

grafalloy prolaunch blue

ProLaunch Red GRFMPLR Available WR, WS, WX

ProLaunch Blue 45 GRFMPL45

ProLaunch Blue 55 GRFMPL55

ProLaunch Blue 65 GRFMPL65

ProLaunch Blue 65 0.350 GRFMPL350

Available WL, WA, WR, WS

Available WA, WR, WS, WX

Available WR, WS, WX

ProLaunch Red Low ball flight counterpart to the original ProLaunch. Proprietary Micro-Mesh tip technology provides lower torque for greater stability while offering superior feel at impact compared to other low trajectory, tip-stiff composite shaft designs. ProLaunch Blue The proprietary Micro-Mesh material found in blue tip technology radically improves the torsional stability of the shaft while promoting a responsive feel at impact. This technological advancement enhances shot consistency by keeping the clubface square at impact leading to greater distance and accuracy off the tee.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

ProLaunch Red Wood - R ProLaunch Red Wood - S ProLaunch Red Wood - X

GRFMPLR-001-WR GRFMPLR-001-WS GRFMPLR-001-WX

Wood Wood Wood

R S X

62 g 62 g 66 g

3° 3° 3º

0.600" 0.600" 0.610"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3” 3"

Low Low Low

W W W

ProLaunch Blue 45 Wood - L ProLaunch Blue 45 Wood - A ProLaunch Blue 45 Wood - R ProLaunch Blue 45 Wood - S

GRFMPL45-001-WL GRFMPL45-001-WA GRFMPL45-001-WR GRFMPL45-001-WS

Wood Wood Wood Wood

L A R S

44 g 44 g 44 g 48 g

5° 5° 5° 5°

0.595" 0.595" 0.595" 0.595"

0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46"

2" 2" 2" 2"

High High High High

W W W W

ProLaunch Blue 55 Wood - A ProLaunch Blue 55 Wood - R ProLaunch Blue 55 Wood - S ProLaunch Blue 55 Wood - X

GRFMPL55-001-WA GRFMPL55-001-WR GRFMPL55-001-WS GRFMPL55-001-WX

Wood Wood Wood Wood

A R S X

56 g 56 g 58 g 58 g

4º 4° 4° 4º

0.600" 0.600" 0.605" 0.605"

0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46"

3" 3" 3" 3"

High High High High

W W W W

ProLaunch Blue 65 Wood - R ProLaunch Blue 65 Wood - S ProLaunch Blue 65 Wood - X

GRFMPL65-001-WR GRFMPL65-001-WS GRFMPL65-001-WX

Wood Wood Wood

R S X

64 g 64 g 64 g

3.2º 2.8º 2.8º

0.600" 0.605" 0.605"

0.335" 0.335" 0.335"

46" 46" 46"

4.5" 4.5" 4.5"

High High High

G G G

ProLaunch Blue 65 350 Wood - R ProLaunch Blue 65 350 Wood - S ProLaunch Blue 65 350 Wood - X

GRFMPL350-001-WR GRFMPL350-001-WS GRFMPL350-001-WX

Wood Wood Wood

R S X

64 g 64 g 64 g

3.2º 2.8º 2.8º

0.600" 0.605" 0.605"

0.350" 0.350" 0.350"

46" 46" 46"

4.5" 4.5" 4.5"

High High High

G G G

Proper Assembly of Graphite Shafts

grafalloy procustom

1 Remove all oil and debris from hosel prior to assembly with a fast drying solvent such as acetone. 2 Lightly abrade the chrome on steel shafts or the paint and polyurethane on graphite shaft tips for maximum adhesion. Take care to avoid damaging the shaft structure by abrading too much as manufacturers will not warrant broken shafts as a result of this. 3 Countersink the hosel 20° (all heads shown in this catalog are pre-countersunk for you). This process ensures that the shaft is protected from the sharp edges of the hosel, which could cause graphite shaft breakage. Avoid using too much epoxy as excess epoxy can go up far up inside the shaft tip and lead to pre-mature breakage. 4 A ferrule provides added shaft protection and gives the club a finished look.

ProLaunch Blue Hybrid GRFMPLHY

ProLaunch Blue Iron GRFMPL

Available IA, IR, IS, IX

Available IA, IR, IS

ProCustom GRFMPC Available IAL, IRS, WAL, WRS

ProCustom The Pro Custom is the perfect fit for clubmakers. Ultralight design provides distance, consistency and accuracy. Multiple trim options allows for inventory flexibility.

Description

Model #

ProLaunch Blue Hybrid - A ProLaunch Blue Hybrid - R ProLaunch Blue Hybrid - S ProLaunch Blue Hybrid - X

GRFMPLHY-001-IA GRFMPLHY-001-IR GRFMPLHY-001-IS GRFMPLHY-001-IX

ProLaunch Blue Iron - A ProLaunch Blue Iron - R ProLaunch Blue Iron - S

GRFMPL-001-IA GRFMPL-001-IR GRFMPL-001-IS

ProCustom Iron - A/L ProCustom Iron - R/S ProCustom Wood - A/L ProCustom Wood - R/S

GRFMPC-001-IAL GRFMPC-001-IRS GRFMPC-001-WAL GRFMPC-001-WRS

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Hybrid Hybrid Hybrid Hybrid

A R S X

79 g 80 g 81 g 82 g

2.6º 2.4º 2.4º 2.4º

0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370"

41" 41" 41" 41"

4" 4" 4" 4"

High High High High

II II II II

Iron Iron Iron

A R S

80 g 81 g 82 g

3.2º 3° 3°

0.600" 0.600" 0.600"

0.370" 0.370" 0.370"

41" 41" 41"

6" 6” 6”

High High High

AA AA AA

Iron Iron Wood Wood

A/L R/S A/L R/S

74 g 77 g 68 g 70 g

4.1° 3.9° 5° 5°

0.590" 0.590" 0.595" 0.600"

0.370" 0.370" 0.335" 0.335"

43" 43" 48" 48"

8" 8" 6" 6"

Mid Mid Mid Mid

L:AA | A:CC R:AA | S:CC L:X1 | A:Y1 R:X1 | S:Y1

GRAPHITE SHAFTS fujikura e300 series

E350 FJE350

E360 FJE360

E370 FJE370

E380 FJE380

E380 Hybrid FJE380HB

E380 Iron FJE380I

Available WR, WS, WX

Available IR, IS, IX

E300 Series Designed for the stronger, faster tempo golfer that desires both a low spin and low launch angle. The E300 models provide maximum stability throughout the swing for that confidence to “go for it”!

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

E350 Wood - R E350 Wood - S E350 Wood - X

FJE350-001-WR FJE350-001-WS FJE350-001-WX

Wood Wood Wood

R S X

57 g 58 g 60 g

4.2° 4.2° 4.2°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid Mid Mid

L L L

E360 Wood - R E360 Wood - S E360 Wood - X

FJE360-001-WR FJE360-001-WS FJE360-001-WX

Wood Wood Wood

R S X

65 g 68 g 71 g

3.8° 3.8° 3.8°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Low-Mid Low-Mid Low-Mid

L L L

E370 Wood - R E370 Wood - S E370 Wood - X

FJE370-001-WR FJE370-001-WS FJE370-001-WX

Wood Wood Wood

R S X

78 g 79 g 80 g

3.3° 3.3° 3.3°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Low Low Low

L L L

E380 Wood - R E380 Wood - S E380 Wood - X

FJE380-001-WR FJE380-001-WS FJE380-001-WX

Wood Wood Wood

R S X

82 g 85 g 86 g

3.2° 3.2° 3.2°

0.605" 0.605" 0.605"

0.335" 0.335" 0.335"

46" 46" 46"

2.5" 2.5" 2.5"

Low Low Low

L L L

E380 Hybrid - R E380 Hybrid - S E380 Hybrid - X

FJE380HB-001-IR FJE380HB-001-IS FJE380HB-001-IX

Hybrid Hybrid Hybrid

R S X

87 g 88 g 89 g

2.8° 2.8° 2.8°

0.610" 0.610" 0.610"

0.370" 0.370" 0.370"

42" 42" 42"

3.5" 3.5" 3.5"

Mid Mid Mid

XX XX XX

E380 Iron - R E380 Iron - S E380 Iron - X

FJE380I-001-IR FJE380I-001-IS FJE380I-001-IX

Iron Iron Iron

R S X

89 g 90 g 91 g

3.4° 3.4° 3.4°

0.600" 0.600" 0.600"

0.370" 0.370" 0.370"

41.5" 41.5" 41.5"

6.5" 6.5" 6.5"

Mid Mid Mid

AA AA AA

GRAPHITE SHAFTS fujikura e200 series

E250 FJE250

E260 FJE260

E270 FJE270

E270 Hybrid FJE270HB

E270 Iron FJE270I

Available WR, WS

Available WR, WS, WX

Available IR2, IR, IS, IX

Available IR2, IR, IS

E200 Series Designed to fit the broadest range of golfers desiring a mid launch angle and mid spin characteristics for control and maximum distance.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

E250 Wood - R E250 Wood - S

FJE250-001-WR FJE250-001-WS

Wood Wood

R S

58 g 58 g

4.2° 4.2°

0.600" 0.600"

0.335" 0.335"

46" 46"

4" 4"

Mid-High Mid-High

L L

E260 Wood - R E260 Wood - S E260 Wood - X

FJE260-001-WR FJE260-001-WS FJE260-001-WX

Wood Wood Wood

R S X

66 g 67 g 68 g

3.9° 3.9° 3.9°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

3" 3" 3"

Mid-High Mid-High Mid-High

L L L

E270 Wood - R E270 Wood - S E270 Wood - X

FJE270-001-WR FJE270-001-WS FJE270-001-WX

Wood Wood Wood

R S X

72 g 73 g 74 g

3.8° 3.8° 3.8°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

2.5" 2.5" 2.5"

Mid-High Mid-High Mid-High

L L L

E270 Hybrid - R2 E270 Hybrid - R E270 Hybrid - S E270 Hybrid - X

FJE270HB-001-IR2 FJE270HB-001-IR FJE270HB-001-IS FJE270HB-001-IX

Hybrid Hybrid Hybrid Hybrid

R2 R S X

69 g 72 g 73 g 74 g

3.7° 3.7° 3.7° 3.7°

0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370"

42" 42" 42" 42"

6.5" 6.5" 6.5" 6.5"

Mid-High Mid-High Mid-High Mid-High

XX XX XX XX

E270 Iron - R2 E270 Iron - R E270 Iron - S

FJE270I-001-IR2 FJE270I-001-IR FJE270I-001-IS

Iron Iron Iron

R2 R S

77 g 78 g 79 g

3.5° 3.5° 3.5°

0.610" 0.610" 0.610"

0.370" 0.370" 0.370"

41" 41” 41”

6" 6" 6"

Mid-High Mid-High Mid-High

AA AA AA

Note: The R2 flex is equivalent to what most manufacturers designate as Senior or A flex

GRAPHITE SHAFTS fujikura e100 series

fujikura sakura

E150 FJE150

E160 E160

E160 Hybrid FJE160HB

E160 Iron FJE160I

Sakura FJSAKUW

Sakura Sport FJSAKUSP

Available WR2, WR, WS

Available IR2, IR, IS

Available IL, WL

E100 Series The 100 Series is designed specifically for the player who is ready to get better but not yet ready for the Tour. Higher spin and a high launch profile allows for greater accuracy and distance with a minimum of effort. Sakura Sakura was engineered for the unique performance attributes of today’s women golfer who expect the best from their golf equipment. These are very lightweight and amongst the most flexible shafts on the market to help to increase distance and trajectory for slow swinging golfers. Sakura Sport The Sakura Sport expands the women’s shaft portfolio by offering a model designed specifically for the female golfer with a faster, stronger swing tempo.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

E150 Wood - R2 E150 Wood - R E150 Wood - S

FJE150-001-WR2 FJE150-001-WR FJE150-001-WS

Wood Wood Wood

R2 R S

55 g 56 g 57 g

4.5° 4.5° 4.5°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

High High High

L L L

E160 Wood - R2 E160 Wood - R E160 Wood - S

FJE160-001-WR2 FJE160-001-WR FJE160-001-WS

Wood Wood Wood

R2 R S

64 g 65 g 66 g

4.5° 4.5° 4.5°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

L L L

E160 Hybrid - R2 E160 Hybrid - R E160 Hybrid - S

FJE160HB-001-IR2 FJE160HB-001-IR FJE160HB-001-IS

Hybrid Hybrid Hybrid

R2 R S

60 g 65 g 66 g

4.1° 4.1° 4.1°

0.600" 0.600" 0.600"

0.370" 0.370" 0.370"

42" 42" 42"

6.5" 6.5" 6.5"

Mid-High Mid-High Mid

WW WW WW

E160 Iron - R2 E160 Iron - R E160 Iron - S

FJE160I-001-IR2 FJE160I-001-IR FJE160I-001-IS

Iron Iron Iron

R2 R S

60 g 64 g 65 g

3.8° 3.8° 3.8°

0.600" 0.600" 0.600"

0.370" 0.370" 0.370"

41.5" 41.5" 41.5"

6.5" 6.5" 6.5"

Mid-High Mid-High Mid-High

AA AA AA

Sakura Iron - L Sakura Wood - L

FJSAKUW-001-IL FJSAKUW-001-WL

Iron Wood

L L

60 g 54 g

4.2° 4.9°

0.585" 0.600"

0.370" 0.335"

40" 46"

6" 4"

High Mid-High

AA L

Sakura Sport Iron - L Sakura Sport Wood - L

FJSAKUSP-001-IL FJSAKUSP-001-WL

Iron Wood

L L

60 g 64 g

4° 4.5°

0.600" 0.600"

0.370" 0.335"

41.5" 46"

6.5" 4"

Mid-High Mid

AA L

Note: The R2 flex is equivalent to what most manufacturers designate as Senior or A flex

The Top Selling Custom Upgrade Shafts In America 4 Years And Counting...

Quality Performance Feel

=Distance

We started with the premise that life is too short to layup. Then we fuse the world’s best super-premium materials with the world’s most advanced designs to create the top selling custom upgrade shafts in America four years running, and most likely, the longest playing, most accurate carbon fiber golf

008 - 2009 -2 2

001

- 20 0

shafts in the world. Visit ustmamiya.com

#1 CUSTOM UPGRADE SHAFT IN AMERICA

USAÊÊÊÊÊJAPANÊÊÊÊÊENGLANDÊÊÊÊÊAUSTRALIAÊÊÊÊÊBANGLADESHÊÊÊÊÊCHINA

GRAPHITE SHAFTS UST-mamiya ATTAS

Attas 5 Series USTAT5

Attas 6 Series USTAT6

Attas 7 Series USTAT7

Available WR2, WR, WS

Available WR, WS, WX

Attas T2 4 Series USTAT24

Attas T2 5 Series USTAT25

Attas T2 6 Series USTAT26

Attas T2 7 Series USTAT27

Available WR2, WR

Available WR2, WR, WS

Available WR, WS, WX

Attas Only the finest premium prepreg materials are selected for use in every hand-crafted ATTAS shaft. Ultra tight tolerances are achieved through the use of low resin prepreg in the precision controlled one-off production process. Features a responsive tip with mid to high launch trajectory. Designed with stiff mid-section profile, stabilized butt section and constant taper profile. Attas T2 Ultra-thin, high modulus low resin prepreg materials creates improved feel and feedback. Linear EI (stiffness) Technology platform maximizes full length plies to improve efficiency of shaft loading. Improved accuracy and distance through consistent transfer of energy throughout the shaft. Note: Please allow additional shipping time for Attas shafts.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Attas 5 Series Wood - R2 Attas 5 Series Wood - R Attas 5 Series Wood - S

USTAT5-001-WR2 USTAT5-001-WR USTAT5-001-WS

Wood Wood Wood

R2 R S

53 g 53 g 53 g

5.3° 5.2° 5.2°

0.595" 0.597" 0.597"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

Attas 6 Series Wood - R Attas 6 Series Wood - S Attas 6 Series Wood - X

USTAT6-001-WR USTAT6-001-WS USTAT6-001-WX

Wood Wood Wood

R S X

67 g 68 g 69 g

3.7° 3.7° 3.6°

0.605" 0.608" 0.610"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

Attas 7 Series Wood - R Attas 7 Series Wood - S Attas 7 Series Wood - X

USTAT7-001-WR USTAT7-001-WS USTAT7-001-WX

Wood Wood Wood

R S X

75 g 77 g 78 g

3° 2.9° 2.9°

0.610" 0.610" 0.614"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

Attas T2 4 Series Wood - R2 Attas T2 4 Series Wood - R

USTAT24-001-WR2 USTAT24-001-WR

Wood Wood

R2 R

47 g 47 g

5.5° 5.5°

0.591" 0.591"

0.335" 0.335"

46" 46"

4" 3.5"

Mid-High Mid-High

E E

Attas T2 5 Series Wood - R2 Attas T2 5 Series Wood - R Attas T2 5 Series Wood - S

USTAT25-001-WR2 USTAT25-001-WR USTAT25-001-WS

Wood Wood Wood

R2 R S

52 g 52 g 52 g

5.6° 5.3° 5.3°

0.614" 0.614" 0.618"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

Attas T2 6 Series Wood - R Attas T2 6 Series Wood - S Attas T2 6 Series Wood - X

USTAT26-001-WR USTAT26-001-WS USTAT26-001-WX

Wood Wood Wood

R S X

65 g 65 g 68 g

3.8° 3.4° 3.4°

0.603" 0.603" 0.607"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

Attas T2 7 Series Wood - R Attas T2 7 Series Wood - S Attas T2 7 Series Wood - X

USTAT27-001-WR USTAT27-001-WS USTAT27-001-WX

Wood Wood Wood

R S X

73 g 73 g 75 g

3.3° 2.9° 2.9°

0.603" 0.603" 0.607"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

Note: The R2 flex is equivalent to what most manufacturers designate as Senior or A flex

GRAPHITE SHAFTS UST-mamiya proforce AXIVCORE

ProForce AXIVCore Tour Green 60 USTAXG60

ProForce AXIVCore Tour Green 70 USTAXG70

ProForce AXIVCore Tour Black 69 USTAXBK69

ProForce AXIVCore Tour Black 79 USTAXBK79

ProForce AXIVCore Tour Black Hybrid USTAXBKHY

ProForce AXIVCore Blue 59 USTAXBL59

ProForce AXIVCore Blue 69 USTAXBL69

ProForce AXIVCore Blue Hybrid 85 USTAXBLHY

Available WR, WS, WX

Available IS

Available WL, WA, WR, WS

Available WR, WS, WX

Available IR, IS

ProForce AXIVCore Tour Green The Green Series uses superior high modulus carbon fiber in the butt and mid section and is available in multiple weights and flexes to fit various swing profiles. ProForce AXIVCore Tour Black The Tour Black Series’ flexible, low torque tip section offers high launch, low spin, and better control, and is available in multiple weights and flexes to fit various swing profiles. ProForce AXIVCore Blue The Blue Series’ active tip section provides a higher launch for longer carry distance, and is available in multiple weights and flexes to fit various swing profiles. Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

AXIVCore Tour Green 60 Wood - R AXIVCore Tour Green 60 Wood - S AXIVCore Tour Green 60 Wood - X

USTAXG60-001-WR USTAXG60-001-WS USTAXG60-001-WX

Wood Wood Wood

R S X

64 g 65 g 67 g

3.4° 3.3° 3.3°

0.600” 0.600” 0.600”

0.335” 0.335” 0.335”

46” 46” 46”

4” 4” 4”

Mid Mid Mid

E E E

AXIVCore Tour Green 70 Wood - R AXIVCore Tour Green 70 Wood - S AXIVCore Tour Green 70 Wood - S

USTAXG70-001-WR USTAXG70-001-WS USTAXG70-001-WX

Wood Wood Wood

R S X

74 g 75 g 76 g

2.6° 2.6° 2.6°

0.605” 0.605” 0.605”

0.335” 0.335” 0.335”

46” 46” 46”

4” 4” 4”

Mid Mid Mid

E E E

AXIVCore Tour Black 69 Wood - R AXIVCore Tour Black 69 Wood - S AXIVCore Tour Black 69 Wood - X

USTAXBK69-001-WR USTAXBK69-001-WS USTAXBK69-001-WX

Wood Wood Wood

R S X

68 g 68 g 68 g

3.1° 3.1° 3.1°

0.610” 0.610” 0.610”

0.335” 0.335” 0.335”

46” 46” 46”

4” 4” 4”

High High High

E E E

AXIVCore Tour Black 79 Wood - R AXIVCore Tour Black 79 Wood - S AXIVCore Tour Black 79 Wood - X

USTAXBK79-001-WR USTAXBK79-001-WS USTAXBK79-001-WX

Wood Wood Wood

R S X

74 g 77 g 77 g

2.7° 2.5° 2.5°

0.610” 0.615” 0.615”

0.335” 0.335” 0.335”

46” 46” 46”

4” 4” 4”

High High High

E E E

AXIVCore Tour Black Hybrid - S

USTAXBKHY-001-IS

Hybrid

99 g

2.5º

0.605”

0.370”

42”

6”

Mid-High

AXIVCore Blue 59 Wood - L AXIVCore Blue 59 Wood - A AXIVCore Blue 59 Wood - R AXIVCore Blue 59 Wood - S

USTAXBL59-001-WL USTAXBL59-001-WA USTAXBL59-001-WR USTAXBL59-001-WS

Wood Wood Wood Wood

L A R S

57 g 58 g 58 g 58 g

4.9° 4.4° 4.1° 3.9°

0.590” 0.595” 0.595” 0.600”

0.335” 0.335” 0.335” 0.335”

46” 46” 46” 46”

4” 4” 4” 4”

High High High High

E E E E

AXIVCore Blue 69 Wood - R AXIVCore Blue 69 Wood - S AXIVCore Blue 69 Wood - X

USTAXBL69-001-WR USTAXBL69-001-WS USTAXBL69-001-WX

Wood Wood Wood

R S X

69 g 69 g 69 g

3.8° 3.8° 3.8°

0.605” 0.605” 0.605”

0.335” 0.335” 0.335”

46” 46” 46”

4” 4” 4”

High High High

E E E

AXIVCore Blue 85 Hybrid - R AXIVCore Blue 85 Hybrid - S

USTAXBLHY-001-IR USTAXBLHY-001-IS

Hybrid Hybrid

R S

85 g 87 g

2.9° 2.9°

0.595” 0.600”

0.370” 0.370”

42” 42”

6” 6”

High High

YY YY

GRAPHITE SHAFTS UST-mamiya proforce v2

ProForce V2 65 USTV265

ProForce V2 65 0.350 USTV2350

Available WR, WS, WX

UST-mamiya proforce RV2

ProForce V2 75 USTV275

Available WR, WS, WX

ProForce V2 Hybrid 0.370 USTV2HY

ProForce V2 Hybrid 0.335 USTV2HY

ProForce Rv2 75 Gold USTRV275

ProForce Rv2 95 Gold USTRV295

Available IR, IS

Available WR, WS

Available IR, IS

ProForce V2 Proforce V2 is designed for players seeking a flatter, more penetrating ball flight. The firm tip section produces a medium launch condition and increased ball speed. The Proforce V2 uses the most superior materials and design to produce a very stable, consistent golf shaft. The super low-torque provides maximum control for today’s larger club heads. ProForce Rv2 Gold The Tour tested ProForce Gold Iron shaft line is designed for improved balance and control. Proforce Rv2 95 is for better players looking for better performance and playability than lightweight steel. Extra distance compared to standard steel and improved control compared to lightweight steel.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

ProForce V2 65 Wood - R ProForce V2 65 Wood - S ProForce V2 65 Wood - X

USTV265-001-WR USTV265-001-WS USTV265-001-WX

Wood Wood Wood

R S X

65 g 66 g 66 g

3° 3° 2.9°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid Mid Mid

E E E

ProForce V2 65 0.350 Wood - R ProForce V2 65 0.350 Wood - S ProForce V2 65 0.350 Wood - X

USTV2350-001-WR USTV2350-001-WS USTV2350-001-WX

Wood Wood Wood

R S X

65 g 66 g 66 g

3° 3° 2.9°

0.600" 0.600" 0.600"

0.350" 0.350” 0.350”

46" 46" 46"

4" 4" 4"

Mid Mid Mid

E E E

ProForce V2 75 Wood - R ProForce V2 75 Wood - S ProForce V2 75 Wood - X

USTV275-001-WR USTV275-001-WS USTV275-001-WX

Wood Wood Wood

R S X

75 g 76 g 76 g

2.2° 2.2° 2.2°

0.605" 0.605" 0.605"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid Mid Mid

E E E

ProForce V2 Hybrid 0.370 - R ProForce V2 Hybrid 0.370 - S

USTV2HY-001-IR USTV2HY-001-IS

Hybrid Hybrid

R S

84 g 86 g

3.2° 3.2°

0.600" 0.605"

0.370" 0.370"

41" 41"

3.5" 3.5"

Mid-High Mid-High

YY YY

ProForce V2 Hybrid 0.335 - R ProForce V2 Hybrid 0.335 - S

USTV2HY-001-WR USTV2HY-001-WS

Hybrid Hybrid

R S

70 g 72 g

3.4° 3.4°

0.605" 0.605"

0.335" 0.335"

44" 44"

3.5" 3.5"

Mid-High Mid-High

ZD ZD

ProForce Rv2 75 Gold Iron - R ProForce Rv2 75 Gold Iron - S

USTRV275-001-IR USTRV275-001-IS

Iron Iron

R S

81 g 83 g

3.2° 3.2°

0.595" 0.600"

0.370" 0.370"

40" 40"

5.5" 5.5"

Mid-High Mid-High

AA AA

ProForce Rv2 95 Gold Iron - R ProForce Rv2 95 Gold Iron - S

USTRV295-001-IR USTRV295-001-IS

Iron Iron

R S

98 g 98 g

2.9° 2.9°

0.600" 0.600"

0.370" 0.370"

40" 40"

5.5" 5.5"

Mid Mid

AA AA

GRAPHITE SHAFTS UST-mamiya mp series

UST-mamiya 65 GOLD

MP5 Wood USTMP5

MP6 Iron USTMP6

65 Gold UST65G

Available WL, WA, WR, WS

Available IL, IA, IR, IS

Available WA, WR, WS

UST-mamiya IROD

UST-mamiya COMPETITIOn

iRod Transitional Iron USTIRI

iRod Transitional Hybrid USTIRHYB

Available IR, IS

Competition Series USTCOMP Available IAL, IRS, WAL, WRS

MP5 / MP6 The Micro-Lite shafts add extreme power, feel, and control to your game. 38 Micro-Ply layers improve feel without sacrificing performance. 65 Gold The UST 65 GOLD is a new light weight shaft designed quite simply - to hit the ball farther with greater accuracy. The very same, advanced, high modulus carbon fiber materials used in the original Proforce models are used in the 65 GOLD. We believe this shaft offers the best value in the industry for a true high performance golf shaft. iRod iRod is a low-cost “transition” iron/hybrid series. Iron shafts are intended for use in 5-W, while hybrids are designed for longer 3 & 4 irons/hybrids. Competition Series Available in a stylish color scheme, the lighter weight combo design of the Competition 65 Series provides the ultimate club building flexibility and helps maximize distance, while offering golfers the perfect fit.

Description

Model #

UST MP5 Wood - L UST MP5 Wood - A UST MP5 Wood - R UST MP5 Wood - S

USTMP5-001-WL USTMP5-001-WA USTMP5-001-WR USTMP5-001-WS

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Wood Wood Wood Wood

L A R S

50 g 50 g 51 g 52 g

4.6° 4.0° 3.7° 3.6°

0.610" 0.610" 0.615" 0.615"

0.335" 0.335" 0.335" 0.335"

46" 46" 46" 46"

4" 4" 4" 4"

High High Mid-High Mid-High

E E E E

UST MP6 Iron - L UST MP6 Iron - A UST MP6 Iron - R UST MP6 Iron - S

USTMP6-001-IL USTMP6-001-IA USTMP6-001-IR USTMP6-001-IS

Iron Iron Iron Iron

L A R S

54 g 66 g 69 g 72 g

4.5° 4.3° 4.3° 4.3°

0.578" 0.596" 0.599" 0.600"

0.370" 0.370" 0.370" 0.370"

39" 41" 41" 41"

5.5" 5.5" 5.5" 5.5"

High High Mid-High Mid-High

AA AA AA AA

UST 65 Gold Wood - A UST 65 Gold Wood - R UST 65 Gold Wood - S

UST65G-001-WA UST65G-001-WR UST65G-001-WS

Wood Wood Wood

A R S

59 g 62 g 62 g

4° 3.9° 3.9°

0.595" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-High Mid-High Mid-High

E E E

UST iROD Transitional Iron - R UST iROD Transitional Iron - S

USTIRI-001-IR USTIRI-001-IS

Iron Iron

R S

74 g 77 g

3.9° 3.8°

0.598" 0.598"

0.370" 0.370"

39" 39"

5.5" 5.5"

Mid-High Mid-High

FF FF

UST iROD Transitional Hybrid - R UST iROD Transitional Hybrid - S

USTIRHYB-001-IR USTIRHYB-001-IS

Hybrid Hybrid

R S

70 g 73 g

4.3° 4.2°

0.600" 0.600"

0.370" 0.370"

42" 42"

5.5" 5.5"

Mid-High Mid-High

YY YY

UST Competition Series Iron - R/S UST Competition Series Iron - A/L UST Competition Series Wood - A/L UST Competition Series Wood - R/S

USTCOMP-001-IAL USTCOMP-001-IRS USTCOMP-001-WAL USTCOMP-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

80 g 83 g 63 g 66 g

4.8° 4.6° 4.9° 4.9°

0.595" 0.600" 0.595" 0.600"

0.370" 0.370" 0.335" 0.335"

42" 42" 47" 47"

6.5" 6.5" 4.5" 4.5"

High Mid-High Mid-High Mid

L:AA | A:BB R:AA | S:BB L:E | A:K R:E | S:K

GRAPHITE SHAFTS SK FIBER

Superfly SKFLY

Corsair 75 SKCOR75

Rocket 85 SKROCK85

Helium SKHE

Pure Energy SKPE

Available WA, WR, WS

Available WR, WS

Available WS, WX

Available WA, WR

Available WR, WS

Superfly The new lamination technology and materials used in the manufacture of the Superfly make it the lighest in the SK Fiber line yet its lower torque and proprietary layup process delivers exceptional control without sacrificing performance. Corsair The Corsair 75 is a mid weight shaft designed to deliver ultra-efficient power transfer and tight shot patterns. Stiffer tipped makes an excellent choice for golfers with a quicker tempo whether with the driver or fairway woods. Rocket 85 Tour weighted and engineered with the stiffness needed for low ball spin and pinpoint accuracy needed on the pro tours. The proprietary lay-up processes and high-modulus material delivers consistent frequency-tuned shafts for the exacting performance golfers require. Helium The Helium features microweave technology that produces consistent performance by reducing head drop and twist at impact for maximum distance and pinpoint accuracy. Pure Energy Pure Energy is designed for today’s oversized heads. The low to mid-high kick point and responsive tip help to reduce hooks and slices while adding distance.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Superfly Wood - A Superfly Wood - R Superfly Wood - S

SKFLY-001-WA SKFLY-001-WR SKFLY-001-WS

Wood Wood Wood

A R S

45 g 50 g 55 g

3.8° 3.5° 3.2°

0.605" 0.605" 0.605"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

High Mid Low

E E E

Corsair 75 Wood - R Corsair 75 Wood - S

SKCOR75-001-WR SKCOR75-001-WS

Wood Wood

R S

74 g 77 g

3.2° 3.°

0.610” 0.610”

0.335” 0.335”

47” 47”

5” 5”

Low-Mid Low

ZE ZE

Rocket 85 Wood - S Rocket 85 Wood - X

SKROCK85-001-WS SKROCK85-001-WX

Wood Wood

S X

85 g 88 g

2.7° 2.4°

0.610” 0.610”

0.335” 0.335”

47” 47”

5” 5”

Low Low

ZE ZE

Helium Wood - A Helium Wood - R

SKHE-001-WA SKHE-001-WR

Wood Wood

A R

55 g 58 g

4.5° 4.3°

0.610" 0.615"

0.335" 0.335"

46" 46"

5" 5"

Mid-High Low-Mid

E E

Pure Energy Wood - R Pure Energy Wood - S

SKPE-001-WR SKPE-001-WS

Wood Wood

R S

62 g 65 g

4° 3.8°

0.605" 0.610"

0.335" 0.335"

48" 48"

7" 7"

Mid Mid

Q Q

POSSIBLY THE MOST CONSISTENT SHAFTS IN THE INDUSTRY Some shaft manufacturers aren’t as well known as others, but gain a cult following. One such company is SK Fiber. The reason is their Consist Frequency Guarantee where every shaft is held to unheard of tight tolerances of ± one cpm. For those that don’t know about frequency, it is a measure of the shaft’s stiffness. One cpm (cycle per minute) is the equivalent to approximately 1/10th of a flex. That is the tightest tolerances in the industry to delivery peace of mind for consistent performance so players of all skill levels can play their very best.

Tour Trac 80 SKTT80

Tour Trac 100 SKTT100

V.I.P. SKVIP

Wedge Force SKWF

Available IA, IR, IS WA, WR, WS

Available IR, IS, IX

Available ILL, WLL

Available IA, IR

Tour Trac 80 The Tour Trac 80’s mid torque and mid kick point provide optimum ball control and trajectory for tight shot patterns and exceptional distance. Tour Trac 100 Tour performance and weight with a firm butt, stiff tip and low torque produces low spin, boring ball trajectory for superior feel and control. The Tour Trac 100 has the strength and feel of steel with the performance and vibration suppression of graphite and an excellent choice for low handicap players making the transition from steel to graphite. V.I.P. Exceptional performance and high launch profile for players with slow smooth swing speeds looking for increased club head speed and distance. Wedge Force Finally a performance graphite golf shaft designed specifically for the scoring wedges. Crafted with a firm butt and responsive tip section for optimal launch angles and ball spin.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Tour Trac 80 Iron - A Tour Trac 80 Iron - R Tour Trac 80 Iron - S Tour Trac 80 Wood - A Tour Trac 80 Wood - R Tour Trac 80 Wood - S

SKTT80-001-IA SKTT80-001-IR SKTT80-001-IS SKTT80-001-WA SKTT80-001-WR SKTT80-001-WS

Iron Iron Iron Wood Wood Wood

A R S A R S

69 g 72 g 75 g 76 g 79 g 81 g

3.8° 3.6° 3.5° 4.0° 3.8° 3.6°

0.600" 0.605" 0.610" 0.600" 0.605" 0.610"

0.370" 0.370" 0.370" 0.335" 0.335" 0.335"

40" 40" 40" 45" 45" 45"

5" 5" 5" 5" 5" 5"

Mid Mid Mid Mid Mid Mid

KK KK KK R R R

Tour Trac 100 Iron - R Tour Trac 100 Iron - S Tour Trac 100 Iron - X

SKTT100-001-IR SKTT100-001-IS SKTT100-001-IX

Iron Iron Iron

R S X

108 g 110 g 112 g

2.6° 2.3° 2.2°

0.620” 0.620” 0.620”

0.370” 0.370” 0.370”

41” 41” 41”

5” 5” 5”

Low-Mid Low Low

ZZ ZZ ZZ

V.I.P. Iron - LL V.I.P. Wood - LL

SKVIP-001-ILL SKVIP-001-WLL

Iron Wood

LL LL

61 g 61 g

3.8° 6.1°

0.580" 0.580"

0.370" 0.335"

40" 45"

6" 6"

High High

HH E

Wedge Force 100 - A Wedge Force 110 - R

SKWF100-001-IA SKWF110-001-IR

Wedge Wedge

A R

100 g 110 g

2.7° 2.5°

0.610" 0.620"

0.370" 0.370"

38" 38"

4" 4"

Low-Mid Mid

SS SS

GRAPHITE SHAFTS what makes the new image shafts unique?

NEW IMAGE GRAPHITE SHAFTS

Each New Image shaft is required to meet rigid specification checks. Those shafts that do meet the strict tolerances are then labeled with a serial number, flex, flex weight (deflection weight), length, torque and tip diameter. Each New Image shaft then goes through a process to determine the point of least resistance to the bend of the shaft. The location of the logo is strategically placed to a “face up” or “face down” position to maximize the shaft’s performance. The shafts are uniquely painted as well, as the color will change depending upon sun or shade, or at different angles.

Gold Image NIGI

Red Image NIRI

Emerald Image NIEI

Purple Image NIPI

Berry Image NIBI

Available WS, WX

Available WR, WS, WX

Available IA, IR, IS WA, WR, WS

Available IL, WL

Lipstick Red Image NILRI Available IL, WL

Gold Image The premier shaft in the New Image line. This high performance shaft has it all. Designed specifically for the golf professional. Red Image A high performance shaft specifically designed for the player looking for a true ultra-light shaft. Designed for pure distance and dead-on accuracy. Emerald Image A superior quality shaft line complete with woods and irons. Designed for golfers with easier swings to ensure consistency and distance. Purple Image Designed exclusively for women, this shaft surpasses industry standards. Designed for a straighter, farther and more controlled ball flight. Berry Image Designed exclusively for women, this shaft surpasses industry standards. Designed for a straighter, farther and more controlled ball flight. Lipstick Red Image The Lipstick Red Image Graphite features the same forgiving playability as other New Image ladies shafts in a new hot color.

Description

Model #

Shaft Type

Flex

Weight

Torque

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Gold Image Wood - S Gold Image Wood - X

NIGI-001-WS NIGI-001-WX

Wood Wood

S X

68 g 71 g

2.5° 2.3°

0.600" 0.600"

0.335" 0.335"

46" 46"

4" 4"

Mid-Low Mid-Low

A4 A4

Red Image Wood - R Red Image Wood - S Red Image Wood - X

NIRI-001-WR NIRI-001-WS NIRI-001-WX

Wood Wood Wood

R S X

58 g 61 g 61 g

3.5° 3.4° 3.4°

0.600" 0.600" 0.600"

0.335" 0.335" 0.335"

46" 46" 46"

4" 4" 4"

Mid-Low Mid-Low Mid-Low

A4 A4 A4

Emerald Image Iron - A Emerald Image Iron - R Emerald Image Iron - S Emerald Image Wood - A Emerald Image Wood - R Emerald Image Wood - S

NIEI-001-IA NIEI-001-IR NIEI-001-IS NIEI-001-WA NIEI-001-WR NIEI-001-WS

Iron Iron Iron Wood Wood Wood

A R S A R S

69 g 75 g 76 g 70 g 78 g 80 g

3.7° 3.6° 3.6° 4.1° 4° 3.9°

0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.335" 0.335" 0.335"

40" 40" 40" 46" 46" 46"

5.5" 6" 6" 5" 5" 5"

Mid Mid Mid Mid Mid Mid

QQ QQ QQ D D D

Purple Image Iron - L Purple Image Wood - L

NIPI-001-IL NIPI-001-WL

Iron Wood

L L

69 g 69 g

4° 4.5°

0.580" 0.580"

0.370" 0.335"

40" 46"

5" 5"

High High

QQ F

Berry Image Iron - L Berry Image Wood - L

NIBI-001-IL NIBI-001-WL

Iron Wood

L L

69 g 69 g

4° 4.5°

0.580" 0.580"

0.370" 0.335"

40" 46"

5" 5"

High High

QQ F

Lipstick Red Image Iron - L Lipstick Red Image Wood - L

NILRI-001-IL NILRI-001-WL

Iron Wood

L L

69 g 69 g

4° 4.5°

0.580" 0.580"

0.370" 0.335"

40" 46"

5" 5"

High High

QQ F

STEEL SHAFTS apollo COLORED STEPLESS STEEL

EXPERIENCE STEEL SHAFTS IN A WHOLE NEW SPECTRUM The ever popular Apollo Stepless Steel shafts are now available in multiple colors to bring life to any golf club. Apollo Colored Stepless Steel Series Graphite shafts come in a cornucopia of colors and helps to bring flavor and life to a club. Steel shafts are, well, typically chrome. So we thought to ourselves, why not make steel shafts colored? Especially in irons, where steel shafts dominate, there is often a drabness as compared to the wow of drivers and fairway woods. Sure, you could put in a graphite shaft, but not every golfer needs graphite or a lighter weight shaft in their irons. The additional weight of steel provides heft to pace out the golferâ&#x20AC;&#x2122;s timing and tempo so they can maintain control, especially with golfers who possess higher clubhead speeds or quicker tempo swings. True, you can find heavier and stiffer graphite iron shafts on the market, but no where near the economical price of a steel shaft. Introducing the all-new Apollo Colored Stepless Steel Series. Based upon our popular Standard Stepless design, but instead of the same boring high-chrome finish, these shafts are coated with a durable finish to provide a stunning appearance. Available in four distinctive colors (Black, Blue, Red and Ivory) in R/S combination flex iron models to match the most popular color schemes in heads and grips today. The Apollo Colored Steel series give golfers (and professional club fitters) just one more option in their arsenal to help lower their score while making a statement about their game.

Description Black Steel Iron - RS Blue Steel Iron - RS Red Steel Iron - RS Ivory Steel Iron - RS

Model # APMSSBK-001-IRS APMSSBL-001-IRS APMSSRD-001-IRS APMSSIV-001-IRS

Black Steel APMSSBK

Blue Steel APMSSBL

Red Steel APMSSRD

Ivory Steel APMSSIV

Available IRS

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Iron Iron Iron Iron

R/S R/S R/S R/S

128 g 128 g 128 g 128 g

0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370"

41" 41" 41" 41"

9.5" 9.5" 9.5" 9.5"

Mid Mid Mid Mid

R:FF | S:BB R:FF | S:BB R:FF | S:BB R:FF | S:BB

STEEL SHAFTS APOLLO acculite

APOLLO phantom

Acculite 75 APMACL75

Acculite 85 APMACL

Acculite 95 APMACL95

Available IR, IS

Available IRS

Acculite 95 Gunsmoke APMGUN Available IRS

APOLLO hump

Phantom APMPHT

Hump Shaft APMHUMP

Available IRS

Available IR, IS

Hump Shaft Tapered APMHUMPT Available IX

The Acculite 75 represents the latest in sub ultra-lightweight technology. This is a full 10 grams lighter than the Acculite 85 and geared more toward those who have a smoother tempo to produce the greatest club head speed possible with a steel shaft. The Acculite 75 is the perfect alternative to graphite in terms of weight, yet produces the consistency long associated with steel shafts. Acculite 85 A cut weight 20 grams lighter than most lightweight steel shafts providing additional feel, trajectory and distance golfers seek from a graphite offering, yet the stability that steel in renowned for. Acculite 95 The Apollo Acculite 95 is yet another high performance steel shaft. Donâ&#x20AC;&#x2122;t let the more traditional step pattern fool you. This shaft delivers an astonishing blend of balance, control and feel. Apollo Gunsmoke features a very durable and equally attractive Physical Vapor Deposition (PVD) coating made popular on many high-end clubheads. Phantom Astonishingly lightweight and unusually sleek, the Phantom possesses a stepless tapered profile which helps produce its incredible feel. A full half ounce lighter than most stepless designs manufactured today to generate more club head speed and distance with less effort. Manufactured to tighter weight tolerances for increased consistency in flex. Hump Shaft The HUMP features an enhanced tip section which offers tip stability on all shots for improved distance and accuracy.

Description

Model #

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Acculite 75 Iron - R Acculite 75 Iron - S

APMACL75-001-IR APMACL75-001-IS

Iron Iron

R S

82 g 85 g

0.595" 0.595"

0.370" 0.370"

40" 40"

11" 9"

High High

RR RR

Acculite 85 Iron - R Acculite 85 Iron - S

APMACL-001-IR APMACL-001-IS

Iron Iron

R S

92 g 95 g

0.600" 0.600"

0.370" 0.370"

40" 40"

11" 9.75"

High High

RR RR

Acculite 95 Iron - R/S

APMACL95-001-IRS

Iron

R/S

105 g

0.600"

0.370"

42"

9.88"

Mid-High

R:RR | S:UU

Acculite 95 Gunsmoke Iron - R/S

APMGUN-001-IRS

Iron

R/S

105 g

0.600"

0.370"

42"

9.88"

Mid-High

R:RR | S:UU

Phantom Iron - R/S

APMPHT-001-IRS

Iron

R/S

105 g

0.600"

0.370"

42"

9.75"

Mid

R:RR | S:UU

Hump Shaft Iron - R Hump Shaft Iron - S Hump Shaft Tapered Iron - X

APMHUMP-001-IR APMHUMP-001-IS AMPHUMPT-001-IX

Iron Iron Iron

R S X

110 g 115 g 115 g

0.580" 0.580" 0.620"

0.370" 0.370" 0.355"

41" 41" 39"

3" 3" 0"

Low Low Low

SS SS SS

STEEL SHAFTS APOLLO balistik

APOLLO shadow

APOLLO spectre lite

Balistik APMBA

Shadow Steel APMSH

Spectre Lite APMSP

Available I, W

Available IAL, IRS, WAL, WRS

APOLLO standard

Standard Stepless APMSS

Standard Stepped APMCG

Available IRS, WRS

Available AL, IRS, WAL, WRS

Apollo Junior APMJR Available 0.500 I & W, 0.560 I

Balistik Trim up to four distinct flexes with one shaft, allowing the ultimate in customization! Shadow Steel The Shadow’s low kickpoint produces higher trajectories for improved distance and softer landings. Features the unmistakable tight step pattern. Spectre Lite The Spectre Lite features a lightweight design in a longer length! A great option for building longer clubs. Mid kickpoint. Standard Stepless / Standard Stepped Apollo’s offers two economical shafts that fit a wide array of golfers; a stepped version as well as a stepless steel version which offers a high-end look at an unbelievable price. Apollo Junior Economically priced, the more flexible design is perfect for younger golfers.

Description

Model #

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Balistik Iron - Multiflex Balistik Wood - Multiflex

APMBA-001-I APMBA-001-W

Iron Wood

S/R/A/L S/R/A/L

136 g 135 g

0.600" 0.600"

0.370" 0.335"

44" 48"

12.5" 12"

Mid-High Mid-High

L:RR | A:TT | R:UU | S:V V L:A | A:B | R:Z | S:ZA

Shadow Steel Iron - A/L Shadow Steel Iron - R/S Shadow Steel Wood - A/L Shadow Steel Wood - R/S

APMSH-001-IAL APMSH-001-IRS APMSH-001-WAL APMSH-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

110 g 128 g 115 g 135 g

0.580" 0.600" 0.580" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 42" 45" 47"

17.5" 13" 18.125" 16.125"

High High High High

L:RR | A:TT R:RR | S:UU L:A | A:B R:A | S:C

Spectre Lite Iron - A/L Spectre Lite Iron - R/S Spectre Lite Wood - A/L Spectre Lite Wood - R/S

APMSP-001-IAL APMSP-001-IRS APMSP-001-WAL APMSP-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

98 g 105 g 106 g 115 g

0.580" 0.600" 0.580" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 42" 45" 47"

9" 11" 12.88" 13.88"

Mid Mid Mid Mid

L:RR | A:TT R:RR | S:UU L:A | A:B R:A | S:C

Standard Stepless Iron - R/S Standard Stepless Wood - R/S

APMSS-001-IRS APMSS-001-WRS

Iron Wood

R/S R/S

125 g 135 g

0.600" 0.600"

0.370" 0.335"

41" 46"

9.5" 10.5"

Mid Mid

R:FF | S:AA R:A | S:B

Standard Stepped Iron - A/L Standard Stepped Iron - R/S Standard Stepped Wood - A/L Standard Stepped Wood - R/S

APMCG-001-IAL APMCG-001-IRS APMCG-001-WAL APMCG-001-WRS

Iron Iron Wood Wood

A/L R/S A/L R/S

115 g 125 g 125 g 130 g

0.580" 0.600" 0.580" 0.600"

0.370" 0.370" 0.335" 0.335"

40" 40" 45" 46"

13.5"" 12" 12.125" 10.125"

Mid Mid Mid Mid

L:FF | A:AA R:FF | S:AA L:A | A:B R:A | S:B

Apollo Junior 0.500 Butt Iron Apollo Junior 0.500 Butt Wood Apollo Junior 0.560 Butt Iron

APMJR500-001-I APMJR500-001-W APMJR560-001-I

Iron Wood Iron

Jr. Jr. Jr.

102 g 107 g 106 g

0.500" 0.500" 0.560"

0.370" 0.335" 0.370"

35" 40" 35"

11.75" 12.88" 10.125"

High High High

FF A FF

STEEL SHAFTS tt dynamic gold sl

Dynamic Gold SL UDGSL Available IR, IS, IX

tt dynamic gold w/sensicore

Dynamic Gold SL Tapered Iron DGSL

Dynamic Gold with Sensicore USNDG

Dynamic Gold with Sensicore Tapered Iron SNDG

Available IR, IS, IX, WR, WS, WX

Available IR, IS, IX

tt dynamic gold

Dynamic Gold UDG Available IR, IS, IX, WR, WS, WX

Available IR, IS, IX

Dynamic Gold Tapered Iron DG

Dynamic Gold 0.350â&#x20AC;? Wood UDG350

Available IR, IS, IX

Available WR, WS, WX

Dynamic Gold SL Identical appearance and performance as Dynamic Gold but over 20 grams lighter. Dynamic Gold with Sensicore A frequency tuned polymer core, located inside the shaft, eliminates up to 70% of unwanted vibration at impact. Dynamic Gold This high-flex, tour weight shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

Description

Model #

Dynamic Gold SL Iron - R300 Dynamic Gold SL Iron - S300 Dynamic Gold SL Iron - X100 Dynamic Gold SL Tapered Iron - R300 Dynamic Gold SL Tapered Iron - S300 Dynamic Gold SL Tapered Iron - X100

UDGSL-001-IR3 UDGSL-001-IS3 UDGSL-001-IX1 DGSL-001-IR3 DGSL-001-IS3 DGSL-001-IX1

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Iron Iron Iron Iron Iron Iron

R S S R S S

104 g 109 g 109 g 104 g 109 g 109 g

0.600" 0.605" 0.605" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.355" 0.355" 0.355"

41" 41" 41" 41-37" 41-37" 41-37"

8" 6" 6" 0" 0" 0"

Low Low Low Low Low Low

AA AA AA SS SS SS

Dynamic Gold Sensicore Iron - R300 Dynamic Gold Sensicore Iron - S300 Dynamic Gold Sensicore Iron - X100 Dynamic Gold Sensicore Wood - R300 Dynamic Gold Sensicore Wood - S300 Dynamic Gold Sensicore Wood - X100 Dynamic Gold Sensicore Tapered Iron - R300 Dynamic Gold Sensicore Tapered Iron - S300 Dynamic Gold Sensicore Tapered Iron - X100

USNDG-001-IR3 USNDG-001-IS3 USNDG-001-IX1 USNDG-001-WR3 USNDG-001-WS3 USNDG-001-WX1 SNDG-001-IR3 SNDG-001-IS3 SNDG-001-IX1

Iron Iron Iron Wood Wood Wood Iron Iron Iron

R S X R S X R S X

124 g 127 g 128 g 121 g 123 g 120 g 124 g 127 g 128 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.335" 0.335" 0.335" 0.355" 0.355" 0.355"

41" 41" 41" 46" 46" 46" 41-37" 41-37" 41-37"

11.625" 9.625" 9.625" 12.5" 10.5" 8.5" 0" 0" 0"

Low Low Low Low Low Low Low Low Low

AA AA AA A1 A1 A1 SS SS SS

Dynamic Gold Iron - R300 Dynamic Gold Iron - S300 Dynamic Gold Iron - X100 Dynamic Gold Wood - R300 Dynamic Gold Wood - S300 Dynamic Gold Wood - X100 Dynamic Gold Tapered Iron - R300 Dynamic Gold Tapered Iron - S300 Dynamic Gold Tapered Iron - X100 Dynamic Gold 0.350 Wood - R300 Dynamic Gold 0.350 Wood - S300 Dynamic Gold 0.350 Wood - X100

UDG-001-IR3 UDG-001-IS3 UDG-001-IX1 UDG-001-WR3 UDG-001-WS3 UDG-001-WX1 DG-001-IR3 DG-001-IS3 DG-001-IX1 UDG350-001-WR3 UDG350-001-WS3 UDG350-001-WX1

Iron Iron Iron Wood Wood Wood Iron Iron Iron Wood Wood Wood

R S X R S X R S X R S X

127 g 130 g 130 g 125 g 127 g 124 g 127 g 130 g 130 g 122 g 124 g 121 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.580" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.335" 0.335" 0.335" 0.355" 0.355" 0.355" 0.350" 0.350" 0.350"

41" 41" 41" 46" 46" 46" 41-37" 41-37" 41-37" 45" 45" 45"

12.125" 10.125" 10.125" 12.5" 10.5" 8.5" 0" 0" 0" 14.38" 12.38" 10.38"

Low Low Low Low Low Low Low Low Low Low Low Low

AA AA AA A1 A1 A1 SS SS SS A1 A1 A1

STEEL SHAFTS tt dg spinner

tt gs75

DG Spinner Wedge Tapered Iron DGSPINW

tt gs85

tt gs95

GS75 UG75

GS85 UGS85

Available IR, IS

GS85 Tapered Iron GS85

GS95 UG95 Available IR, IS

Available IR, IS

Available Wedge, Wedge+

GS95 Tapered Iron GS95 Available IR, IS

DG Spinner Wedge A wedge shaft designed specifically to increase ball spin as much as 700+ RPM during full and low impact approach shots for maximum stopping power on the green. GS75 The GS75 is the lightest steel alloy golf shaft in the world. The GS75 provides improved responsiveness, durability, performance and feel. GS85 The latest addition to True Temper’s super lightweight GS family, and is designed for all player profiles. It is easy to swing and delivers stability and consistency. GS95 True Temper introduces the all-new GS95, a lightweight steel shaft that is easy to swing and gives a great ‘graphite-like’ feel. Designed to perform for players of all ability, GS95 delivers the stability and consistency of steel yet provides a new, unique feel that sets it apart from every shaft on the market. Featuring innovative Speed Step design, the GS95 incorporates a responsive tip that increases your initial launch angle and maximizes your ball’s peak trajectory, while giving you the best feel in steel. Description

Model #

Dynamic Gold Spinner Wedge SW/LW Dynamic Gold Spinner Wedge Plus PW/AW

DGSPINW-001-3700 DGSPINWP-001-3700

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Wedge Wedge

Wedge Wedge +

124 g 131 g

0.600" 0.600"

0.355" 0.355"

37" 37"

0" 0"

Low Low

SS SS

GS75 Iron - R300 GS75 Iron - S200

UG75-001-IR UG75-001-IS

Iron Iron

R S

86 g 88 g

0.600" 0.600"

0.370" 0.370"

40" 40"

12" 8.75"

High High

FF FF

GS85 Iron - R300 GS85 Iron - S300 GS85 Tapered Iron - R300 GS85 Tapered Iron - S300

UG85IR UG85IS G85IR G85IS

Iron Iron Iron Iron

R S R S

92 g 94 g 92 g 94 g

0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.355" 0.355"

40 - 36.5" 40 - 36.5" 40 - 36.5" 40 - 36.5"

Variable Variable Variable Variable

High High High High

SS SS

GS95 Iron - R300 GS95 Iron - S300 GS95 Tapered Iron - R300 GS95 Tapered Iron - S300

UG95IR UG95IS G95IR G95IS

Iron Iron Iron Iron

R S R S

101.5 g 103.5 g 101.5 g 103.5 g

0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.355" 0.355"

40 - 36.5" 40 - 36.5" 40 - 36.5" 40 - 36.5"

Variable Variable Variable Variable

High High High High

SS SS SS SS

* GS85 & GS95 sold in individual lengths for #3-W. Please specify when ordering.

turn any steel shaft into a sensicore shaft WITH GENUINE TRUE TEMPER SENSICORE INSERTS

SensiCore is an insert which reduces vibration 70% better than other steel shafts and 25-30% better than graphite shafts. SensiCore improves feel and provides golfers the ability to practice and play longer because it decreases the harmful effects of “shock” on the hands, wrists, elbows, and shoulders. Originally built into True Temper models, the SensiCore inserts are now sold in a pack of eight to fit inside any steel shaft. The SensiCore insert is 14” long and weighs a mere 4 grams. The insert does not affect the playability or alter swingweight. 8 inserts per package. #SNPACK8-001 NOTE: Do not use Sensicore Inserts with the following True Temper products: GS75, GS85, GS95.

STEEL SHAFTS tt dynalite gold xp

Dynalite Gold XP UMZL

tt dynalite gold

Dynalite Gold XP Tapered Iron MZL

Available IR, IS

Dynalite Gold SL ULGSL

tt dynalite

Dynalite Gold SL Tapered Iron LGSL

Available IR, IS

Available IR, IS, IX

tt lite

tt multi-step

Dynalite 100 UL

TT Lite XL U2L / UTTXL

Available IRS, IAL

Available IAL, IRS, WAL, WRS

Available IR, IS, IX

TT Lite XL Tapered Iron 2XL

Multi-Step Lite TTSU Available IAL, IRS

Available IR, IS

Dynalite Gold XP Delivers “Xtra” trajectory and spin performance through a more responsive tip section designed to promote a higher launch angle and peak trajectory for maximum distance. Dynalite Gold SL Dynalite Gold SL’s tip responsive design promotes a high ball flight to optimize trajectory for lower ball hitters. The shaft offers the same incredible benefits of increased ball speed, added distance and less fatigue found only in the SL series of shafts by True Temper. Dynalite 100 Dynalite’s lightweight, low-flex design has made it a favorite among golfers of all levels. TT Lite XL This mid-flex design is a great choice for any wood or iron. R/S shafts come in longer lengths for a wider array of assembly options. Multi-Step Lite Multi-Step Lite is designed with a unique step pattern that creates tip flexibility for players seeking higher launch angles from a steel shaft. The extended parallel tip section allows multiple trimming options for nearly all golfers.

Description

Model #

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Tip Parallel

Ball Flight

Trim Code

Dynalite Gold XP Iron - R300 Dynalite Gold XP Iron - S300 Dynalite Gold XP Tapered Iron - R300 Dynalite Gold XP Tapered Iron - S300 Dynalite Gold XP Tapered Iron - X100

UMZL-001-IR UMZL-001-IS MZL-001-IR MZL-001-IS MZL-001-IX

Iron Iron Iron Iron Iron

R S R S X

117 g 121 g 113 g 117 g 120 g

0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.355" 0.355" 0.355"

41" 41" 41-37" 41-37" 41-37"

12.125" 10.125" 0" 0" 0"

High High High High High

AA AA SS SS SS

Dynalite Gold SL Iron - R300 Dynalite Gold SL Iron - S300 Dynalite Gold SL Tapered Iron - R300 Dynalite Gold SL Tapered Iron - S300 Dynalite Gold SL Tapered Iron - X100

ULGSL-001-IR ULGSL-001-IS LGSLIR LGSLIS LGSLIX

Iron Iron Iron Iron Iron

R S R S X

104 g 105 g 102 g 103 g 108 g

0.600" 0.605" 0.600" 0.600" 0.600"

0.370" 0.370" 0.355" 0.355" 0.355"

41" 41" 42-37" 42-37" 42-37"

8" 6" 0" 0" 0"

High High High High High

AA AA SS SS SS

Dynalite 100 Iron - A/L Dynalite 100 Iron - R/S

UL-001-IAL UL-001-IC

Iron Iron

A/L R/S

112 g 122 g

0.580" 0.600"

0.370" 0.370"

41" 42"

13.75" 12.5"

High High

L:AA | A:BB R:AA | S:CC

TT Lite XL Iron - A/L TT Lite XL Iron - R/S TT Lite XL Wood - A/L TT Lite XL Wood - R/S TT Lite XL Tapered Iron - R TT Lite XL Tapered Iron - S

U2L-001-IAL UTTXL-001-IC U2L-001-WAL UTTXL-001-WC 2XLIR 2XLIS

Iron Iron Wood Wood Iron Iron

A/L R/S A/L R/S R S

110 g 128 g 110 g 126 g 113 g 118 g

0.580" 0.600" 0.580" 0.600" 0.620" 0.620"

0.370" 0.370" 0.335" 0.335" 0.370" 0.370"

40" 43" 46" 48" 40 - 36" 40 - 36"

10" 13.5" 13.5" 13.5" 0" 0"

Mid Mid Mid Mid Mid Mid

L:AA | A:BB R:AA2 | S:CC2 L:A1 | A:B1 R:A1 | S:C1 SS SS

Multi-Step Lite Iron - A/L Multi-Step Lite Iron - R/S

TTSU-001-IAL TTSU-001-IC

Iron Iron

A/L R/S

119 g 125 g

0.580" 0.600"

0.370" 0.370"

42" 42"

17.5" 14.25"

High High

L:AA | A:BB R:AA | S:CC

STEEL SHAFTS project x

Project X UPROJX Available IR+, IS, IS+, IX, IX+

project x flighted

Project X Tapered Iron PROJX

Project X Flighted UPROJXF

Available IR+, IS, IS+, IX, IX+

project x rifle spinner

Project X Flighted Tapered PROJXF

Rifle Spinner Wedge URSWEI Available IR, IR+, IS, IS+, IX

Available IR+, IS, IS+, IX, IX+

Rifle Spinner Tapered Wedge RSWEI Available IR, IR+, IS, IS+, IX

Project X Features a different constant taper per inch for each shaft in the set resulting in more energy transfer to the ball. The ball gets up faster and flattens out for a penetrating trajecory. Project X Flighted Flighted technology features a change in kick point within each shaft throughout the set. Long irons provide a lower kick point for higher ball flight and easier launch while the short irons have a higher kick point for a lower trajectory and greater control.

100

Description

Model #

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Ball Flight

Trim Code

Project X Iron - R+ (5.0) Project X Iron - S (5.5) Project X Iron - S+ (6.0) Project X Iron - X (6.5) Project X Iron - X+ (7.0) Project X Tapered Iron - R+ (5.0) Project X Tapered Iron - S (5.5) Project X Tapered Iron - S+ (6.0) Project X Tapered Iron - X (6.5) Project X Tapered Iron - X+ (7.0)

UPROJX50 UPROJX55 UPROJX60 UPROJX65 UPROJX70 PROJX50 PROJX55 PROJX60 PROJX65 PROJX70

Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron

R+ S S+ X X+ R+ S S+ X X+

115 g 115 g 120 g 125 g 130 g 115 g 115 g 120 g 125 g 130 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370" 0.370" 0.355" 0.355" 0.355" 0.355" 0.355"

41.5-37" 41.5-37" 41.5-37" 41.5-37" 41.5-37" 41.5-37" 41.5-37" 41.5-37" 41.5-37" 41.5-37"

Low-Mid Low-Mid Low-Mid Low-Mid Low-Mid Low-Mid Low-Mid Low-Mid Low-Mid Low-Mid

SS SS SS SS SS SS SS SS SS SS

Project X Flighted Iron - R+ (5.0) Project X Flighted Iron - S (5.5) Project X Flighted Iron - S+ (6.0) Project X Flighted Iron - X (6.5) Project X Flighted Iron - X+ (7.0) Project X Tapered Flighted Iron - R+ (5.0) Project X Tapered Flighted Iron - S (5.5) Project X Tapered Flighted Iron - S+ (6.0) Project X Tapered Flighted Iron - X (6.5) Project X Tapered Flighted Iron - X+ (7.0)

UPROJXF50 UPROJXF55 UPROJXF60 UPROJXF65 UPROJXF70 PROJXF50 PROJXF55 PROJXF60 PROJXF65 PROJXF70

Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron

R+ S S+ X X+ R+ S S+ X X+

115 g 120 g 125 g 130 g 135 g 115 g 120 g 125 g 130 g 135 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370" 0.370" 0.355" 0.355" 0.355" 0.355" 0.355"

42-37.5" 42-37.5" 42-37.5" 42-37.5" 42-37.5" 42-37.5" 42-37.5" 42-37.5" 42-37.5" 42-37.5"

Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable

SS SS SS SS SS SS SS SS SS SS

Rifle Spinner Wedge - R (4.5) Rifle Spinner Wedge - R+ (5.0) Rifle Spinner Wedge - S (5.5) Rifle Spinner Wedge - S+ (6.0) Rifle Spinner Wedge - X (6.5) Rifle Spinner Tapered Wedge - R (4.5) Rifle Spinner Tapered Wedge - R+ (5.0) Rifle Spinner Tapered Wedge - S (5.5) Rifle Spinner Tapered Wedge - S+ (6.0) Rifle Spinner Tapered Wedge - X (6.5)

URSWEI-001-IR URSWEI-001-IRP URSWEI-001-IS URSWEI-001-ISP URSWEI-001-IX RSWEI-001-IR RSWEI-001-IRP RSWEI-001-IS RSWEI-001-ISP RSWEI-001-IX

Wedge Wedge Wedge Wedge Wedge Wedge Wedge Wedge Wedge Wedge

R R+ S S+ X R R+ S S+ X

115 g 115 g 120 g 125 g 130 g 115 g 115 g 120 g 125 g 130 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370" 0.370" 0.355" 0.355" 0.355" 0.355" 0.355"

37" 37" 37" 37" 37" 37" 37" 37" 37" 37"

Mid-High Mid-High Mid-High Mid-High Mid-High Mid-High Mid-High Mid-High Mid-High Mid-High

SS SS SS SS SS SS SS SS SS SS

project x rifle

parallel tapered 0.350 tip shafts

project x rifle flighted

which to choose? In this catalog, unless otherwise specified, all shafts are parallel tipped. That means the tip fits into irons with 0.370” bored and woods with 0.335” bores. All of the clubheads offered in this catalog are bored for parallel tip. In some shaft offerings, there are also the so-called taper-tip shafts. These shafts are primarily used for re-shafting select irons from the OEMs. Taper tip bores are 0.355”. Taper tip shafts must be specified by length or club number. Certain OEMs also use 0.350” bores on their woods. Appropriately, use 0.350” shafts for re-shafting these clubs. Be sure to check the bore size before ordering shafts for re-shafting OEM clubs to ensure the correct fit.

Rifle URIFM

Rifle Tapered RIFM

Rifle Flighted URIFMF

Available IA, IR, iR+, IS, IS+, IX, IX+

Available IR, iR+, IS, IS+, IX, IX+

Rifle Flighted Tapered RIFMF Available IR, iR+, IS, IS+, IX, IX+

Rifle Rifle steel shafts feature patented stepless design and are Frequency Matched. An excellent choice for all players. Rifle Flighted Flighted technology features a change in kick point within each shaft throughout the set. Long irons provide a lower kick point for higher ball flight and easier launch while the short irons have a higher kick point for a lower trajectory and greater control. Rifle Spinner Wedge Originally made for PGA Tour players who like a softer feel in their scoring irons, the Rifle Spinner is a scoring wedge shaft designed for sand, lob and gap wedges. Description

Model #

Shaft Type

Flex

Weight

Butt Size

Tip Size

Length

Ball Flight

Trim Code

Rifle Iron - A (4.0) Rifle Iron - R (4.5) Rifle Iron - R+ (5.0) Rifle Iron - S (5.5) Rifle Iron - S+ (6.0) Rifle Iron - X (6.5) Rifle Iron - X+ (7.0) Rifle Iron - A (4.0) Rifle Tapered Iron - R (4.5) Rifle Tapered Iron - R+ (5.0) Rifle Tapered Iron - S (5.5) Rifle Tapered Iron - S+ (6.0) Rifle Tapered Iron - X (6.5) Rifle Tapered Iron - X+ (7.0)

URIFM40 URIFM45 URIFM50 URIFM55 URIFM60 URIFM65 URIFM70 RIFM40 RIFM45 RIFM50 RIFM55 RIFM60 RIFM65 RIFM70

Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron

A R R+ S S+ X X+ A R R+ S S+ X X+

105 g 110 g 115 g 120 g 125 g 130 g 135 g 105 g 110 g 115 g 120 g 125 g 130 g 135 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370" 0.370" 0.370" 0.370" 0.355" 0.355" 0.355" 0.355" 0.355" 0.355" 0.355"

Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable

High High Mid-High Mid-High Mid Mid Mid High High Mid-High Mid-High Mid Mid Mid

SS SS SS SS SS SS SS SS SS SS SS SS SS SS

Rifle Flighted Iron - R (4.5) Rifle Flighted Iron - R+ (5.0) Rifle Flighted Iron - S (5.5) Rifle Flighted Iron - S+ (6.0) Rifle Flighted Iron - X (6.5) Rifle Flighted Iron - X+ (7.0) Rifle Flighted Tapered Iron - R (4.5) Rifle Flighted Tapered Iron - R+ (5.0) Rifle Flighted Tapered Iron - S (5.5) Rifle Flighted Tapered Iron - S+ (6.0) Rifle Flighted Tapered Iron - X (6.5) Rifle Flighted Tapered Iron - X+ (7.0)

URIFMF45 URIFMF50 URIFMF55 URIFMF60 URIFMF65 URIFMF70 RIFMF45 RIFMF50 RIFMF55 RIFMF60 RIFMF65 RIFMF70

Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron

R R+ S S+ X X+ R R+ S S+ X X+

110 g 115 g 120 g 125 g 130 g 135 g 110 g 115 g 120 g 125 g 130 g 135 g

0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600" 0.600"

0.370" 0.370" 0.370" 0.370" 0.370" 0.370" 0.355" 0.355" 0.355" 0.355" 0.355" 0.355"

Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable

SS SS SS SS SS SS SS SS SS SS SS SS

All Project X shafts are sold in individual lengths #1-9, wedge. Please specify when ordering.

101

GRIPS KARMA GRIPS

SYNTHETIC wrap

karma WRAP

Karma Wrap The Karma Wrap grips feature soft rubber compound in a traditional wrap style. New for 2011 are the hot white and red Wraps! Synthetic Wrap The Karma Synthetic Wrap is a soft two-piece overwrap style grip that feels great and wonâ&#x20AC;&#x2122;t slip! Now available in two hot new colors: white and red! Karma Scented Cleanse your mind, body and spirit out on the golf course with the new Karma Scented Grips. Fragrances are mixed into rubber compound to provide a holistic approach White Wrap RF-100

Red Wrap RF-101

Black Wrap RF-55

0.600 round 49g

0.600 round 46g

0.600 round 52g

Black Synthetic Wrap RF-44

White Synthetic Wrap RF-107

0.600 round 43g

0.600 round 39g

Red Synthetic Wrap RF-108 0.600 round 39g

KARMA Scented

102

Vanilla Scented Grip RF-97

Pink Rose Scented Grip RF-88

0.560 round 40g

Green Jasmine Scented Grip RF-89

Purple Lavender Scented Grip RF-90

Brown Chocolate Scented Grip RF-94

0.560 round 40g

to improving your golf score. The Karma Scented grips are available in five unique colors and fragrances.

GRIPS KARMA GRIPS

MULTI-TEXTURE

Multi-Texture The Karma Multi-Texture features modern styling and premium performance. Multiple textured surfaces ensure a sure grip. The MultiTexture cord incorporates cord in the lower half of the grip for superior control. Dual Touch The Karma Dual Touch are available in numerous color combinations! These exciting Karma grips are not only multi-colored, but multitextured to provide various amounts of slip-resistance for the thumbs and upper/lower hands areas of the hands where it is needed most.

Multi-Texture Black/Red RF-05

Multi-Texture Black/White RF-80

Multi-Texture USA RF-79

0.600 round 48g

0.600 round 50g

Multi-Texture Black/Red Oversize (+1/16”) RF-87 0.600 round 62g

Multi-Texture USA Oversize (+1/16”) RF-86

Black/Red Multi-Texture Cord RF-56

0.600 round 62g

0.600 round 50g

dual touch

Dual Touch Black/Blue RF-54

Dual Touch Black/Red RF-65

Dual Touch Black/Orange RF-62

Dual Touch Black/Yellow RF-63

Dual Touch Black/Pink RF-64

Dual Touch Black/White RF-93

Dual Touch Blue/Black RF-06

0.600 round 48g

0.560 round 42g

0.600 round 48g

0.600 round 50g

103

GRIPS BLACK VELVET

KARMA GRIPS

WHITE VELVET

Black Velvet The Karma Black Velvet grips feature classic all-black color scheme with familiar and proven grip pattern. New softer rubber compound. White Velvet The Karma White Velvet grips feature the same proven compound and performance as our best-selling Black Velvet, but in the hottest new color in golf: white! Now available in multiple sizes for true custom fitting. Colored Velvet These Karma grips feature the same feel and tackiness Black Velvet Junior RF-69

Black Velvet Ladies RF-76

0.540 round 37g

0.560 round 39g

Black Velvet RF-07 0.600 round 48g

Black Velvet Midsize (+1/32â&#x20AC;?) RF-08

Black Velvet Jumbo (+1/16â&#x20AC;?) RF-52

0.600 round 55g

0.600 round 66g

White Velvet RF-95 0.600 round 53g

White Velvet Midsize RF-98

White Velvet Jumbo RF-99

0.600 round 57g

0.600 round 67g

colored VELVET

104

Ladies Blue Velvet RF-09

Ladies Pink Velvet RF-04

Light Blue Velvet Junior RF-77

Black/Blue Velvet RF-45

Black/Silver Velvet RF-46

0.560 round 39g

0.540 round 34g

0.600 round 52g

as the Black Velvet, but in various color schemes. The Light Blue Velvet Junior is perfect for either boys or girls.

GRIPS KARMA GRIPS

Black/WHITE VELVET

Air Cell

Black/White Velvet The Karma Black/White Velvet grips feature the same feel and tackiness as the Black Velvet grips, but in a white fill color scheme. Air Cell The unique Air Cell openings extend along the interior of the grip trapping air between the dual layer constructions resulting into improved shock-absorbing compared with that of conventional rubber grips. The Velvet material and distinctive pattern ensure excellent traction, feel and durability. Velvet Paddle Putter Grip The Karma Velvet Paddle Putter grips feature the familiar velvet pattern and is manufactured using a soft rubber compound for proven

Black/White Velvet RF-10 0.600 round 48g

performance.

Black/White Velvet Midsize (+1/32”) RF-12

Black/White Velvet Jumbo (+1/16”) RF-53

0.600 round 55g

0.600 round 66g

Black/White Velvet Junior RF-11

Air Cell Black/Blue RF-74

Air Cell Black/Red RF-75

0.540 round 37g

0.600 round 51g

Synthetic Wrap Paddle Putter Grip The Karma Synthetic Wrap Paddle Putter grips are soft two-piece overwrap style

velvet putter grip

grips that feels great and

SYNTHETIC WRAP putter grip

won’t slip!

Junior Black Velvet Paddle Putter RF-51

Light Blue Velvet Junior Paddle Putter RF-78

0.540 48g

Black Velvet Paddle Putter RF-50

Red Velvet Paddle Putter RF-47

0.580 66g

White Synthetic Wrap Paddle Putter RF-109 0.600 round 69g

Red Synthetic Wrap Paddle Putter RF-110 0.600 round 71g

105

GRIPS dual touch midsize putter grip

synthetic midsize putter grip

KARMA GRIPS Dual Touch Midsize Putter Grip The Karma Dual Touch putter grips are in style! Featuring the same soft Karma rubber compound in an all-new no-slip pattern, the multiple colors will allow you match virtually any color scheme. Synthetic Midsize Putter Grip The Karma Overwrap putter grips feature a soft two-piece overwrap style grip that feels great and wonâ&#x20AC;&#x2122;t slip! Large paddle shape for stability. Multi-Density Midsize Putter Grip The Karma Multi-Density putter grips feature multi-

Dual Touch Midsize Pink Putter RF-61

Dual Touch Midsize Blue Putter RF-58

Dual Touch Midsize Orange Putter RF-59

Dual Touch Midsize Yellow Putter RF-60

Dual Touch Midsize Red Putter RF-57

Blue/Silver Overwrap Midsize Putter RF-48

Gray/Silver Overwrap Midsize Putter RF-49

0.580 85g

0.580 72g

density material construction for the ultimate in feel and performance. Seamless construction and two-color combination creates a modern look. Jumbo Putter Grip The Karma Jumbo Putter Grips feature a comfortable

multi-density MIDSIZE putter grip

jumbo putter grip

pistol shape for those with larger hands. A multi-textured construction starts out with smooth and tacky top and sides and rounded out with a soft, yet high traction bottom outlined in white.

106

Black/Yellow Multi-Density Midsize Putter RF-83

Black/Red Multi-Density Midsize Putter RF-84

Black/Blue Multi-Density Midsize Putter RF-85

0.580 77g

Jumbo Putter Black RF-91

Jumbo Putter Black/Red RF-92

0.580 112g

GRIPS KARMA GRIPS

Supra putter grip

TWO-PIECE putter grip

Supra Putter Grip Measuring nearly 1.75 inches across, the Karma Supra super-oversized jumbo putter grips keep your wrists rock steady so that only the big muscles in the arms and shoulders are used to create a repeatable pure pendulum stroke. The Karma Supra installs just like any normal grip. Conforms with USGA Rules. Two-Piece Putter Grip Finally, Karma brings its renown combination of superior value and premium performance to long and belly putters! Works great on most long putter shafts. Training Grip

Supra Jumbo Putter Black RF-70

Supra Jumbo Putter Orange RF-71

Supra Jumbo Putter Red RF-72

0.560 204g

The Karma training grips

Supra Jumbo Putter Lavender RF-73

Two-Piece Putter Grip RF-68 0.600 45g / 97g

0.560 204g

place the hands in the correct position every time. Excellent for beginners or to put on training clubs. IBELLA GRIPS TRAINING grip

Obsession

ibella obSession

ibella bellissima

The iBella Obsession grips are perfectly matched to the iBella Obsession line of clubheads. Featuring distinct design and soft synthetic seamless construction, these grips are sure to make a statement. Bellissima The perfect companion to the iBella Bellissima Collection of clubheads, this grip features an elegant black and mocha two-tone color scheme. The Bellissima putter grip features a multi-density material construction for the ultimate in feel and performance.

Mens Training Grip RF-27

Mens Training Grip (LH) RF-25

Ladies Training Grip RF-26

iBella Obsession IBGRIP

0.600 73g

0.560 62g

0.580 round 43g

iBella Obsession Putter IBPGRIP 0.580 72g

iBella Bellissima RF81 0.560 41g

iBella Bellissima Multi-Density Putter RF82 0.580 77g

107

Introducing the new VDRâ&#x201E;˘ The variable depth surface design delivers the ultimate in traction and control.

The new VDR grip features variable depth texture that gives you confidence in all weather conditions. This advanced material minimizes harmful vibrations from the clubhead at impact. Try the VDR and take your game to a whole new level.

Learn more at GolfPride.com

GRIPS GOLF PRIDE

VDR

VDR The VDR offers an exceptional combination of high performance texture, striking appearance, and an innovative new vibration dampening rubber material providing a 30 percent reduction in high frequency vibrations versus a standard rubber grip. This allows golfers greater shot control and consistency, due to the elimination of fatigue and increased grip pressure. The computer designed variable depth three-dimensional texture is designed to enhance the playerâ&#x20AC;&#x2122;s connection with the club via the grip. The texture is intended to do a better function of channeling moisture, improve traction and feel in both wet and dry conditions.

VDR Undersize Black RE-148 0.580 round 45 g

VDR Standard Black RE-143

VDR Standard White RE-144

VDR Standard Blue RE-145

VDR Standard Red RE-146

VDR Midsize Black RE-147

0.600 round 50 g

0.600 round 57 g

Tour Wrap 2G With a modernized look and fresh, new colors, the Tour Wrap 2G now features enhanced tackiness and an even softer material

tour wrap 2g

for a great new feel. This one-piece, simulated wrap grip combines the look and feel of luxury leather with the durability, economy, and performance of high-tack rubber.

Tour Wrap 2G Undersize Black RE-128 0.580 round 43 g

Tour Wrap 2G Black 0.580 RE-129

Tour Wrap 2G Black 0.600 RE-130

Tour Wrap 2G White RE-131

Tour Wrap 2G Red RE-132

Tour Wrap 2G Midsize Black RE-133

Tour Wrap 2G Jumbo Black RE-134

Tour Wrap BCT Cord RE-07

0.580 round 50 g

0.600 round 48 g

0.600 round 55 g

0.600 round 48 g

0.600 round 58 g

0.600 round 73 g

0.600 round 52.5g

109

GRIPS GOLF PRIDE

NEW DECADE MULTI-COMPOUND

New Decade MultiCompound Golf Pride’s most popular grip. This innovative hybrid grip fuses the positive performance of rubber and cord for an exciting new look and feel. The MultiCompound boasts Golf Pride’s exclusive black Velvet Cord in the upper hand area for firm all-weather control, and a soft rubber material in the lower hand for ultimate control and responsiveness.

New Decade MCC 0.580 Red RE-141

New Decade MCC 0.580 Red Ribbed RE-137

New Decade MCC 0.600 Red RE-34

New Decade MCC 0.600 Red Ribbed RE-138

0.580 round 48.5g

0.580 ribbed 48.5g

0.600 round 46.5g

0.600 ribbed 46.5g

New Decade MCC Blue RE-25

New Decade MCC White RE-107

New Decade MCC Green RE-26

0.600 round 46.5g

NEW DECADE MULTI-COMPOUND MIDSIZE

how often should you change your grips? It has been proven that worn or slick grips can cost you valuable strokes. Think of it the same way as putting new tires on your car when the tread becomes bald and unsafe to drive. Just like new tires, not only do you get peace of mind safety-wise, but better performance. Golf grips are made of materials that age and wear over time. They naturally degrade from the exposure to heat and sunlight as well as the dirt and oils from your hands. While proper cleaning can prolong the life of a grip, there is only so long the grip can last.

110

New Decade MCC Orange RE-27

New Decade MCC Yellow RE-94

New Decade MCC Sky Blue RE-95

New Decade MCC Purple RE-127

0.600 round 46.5g

New Decade MCC Midsize Red RE-31

New Decade MCC Midsize Blue RE-108

New Decade MCC Midsize White RE-126

0.600 round 59g

Softer grips, such as those made of polyurethane, will tend to wear quicker than rubber grips, with the more expensive corded grips lasting the longest. Avid golfers will re-grip their clubs at the beginning of each year, while others will elect to re-grip every 2 or 3 years based on amount of play. Even if a club has never been played, it’s a good idea to change it every 5 years.

GRIPS GOLF PRIDE

TOUR VELVET

Tour Velvet The most popular grip in golf today combines an exclusive, state-of-the-art rubberblend compound with a computer-designed, non-slip surface pattern for maximum playability, comfort, and confidence. The Tour Velvet is the standard upon which many club manufacturers base their designs. Tour Velvet BCT The Tour Velvet BCT (Brushed Cotton Technology) cord grip is constructed with tighter-weave cotton twill fiber that offers great traction and all-weather performance, but with new improved feel for the ultimate in comfort. Tour Velvet Junior RE-83 0.500 ribbed 45g

Tour Velvet Undersize 0.560 Ribbed RE-60

Tour Velvet Undersize 0.580 Ribbed RE-136

0.560 ribbed 50g

0.580 ribbed 47.5g

Tour Velvet Tour Velvet Tour Velvet Tour Velvet Tour Velvet Tour Velvet Undersize Standard 0.580 Standard Standard 0.600 Standard Standard 0.620 0.580 Ribbed RE-42 0.580 Ribbed RE-72 0.600 Ribbed RE-155 Pink Logo RE-104 RE-78 0.580 round 0.600 round 0.620 round 51.5g 49.5g 45g RE-81 0.580 ribbed 0.600 ribbed 0.580 ribbed 47.5g

51.5g

49.5g

TOUR VELVET BCT CORD

Tour Velvet Midsize (+1/16â&#x20AC;?) RE-43 0.600 round 53.5g

Tour Velvet Jumbo (+1/8â&#x20AC;?) RE-04 0.600 round 61g

Tour Velvet BCT Cord 0.580 RE-82

Tour Velvet BCT Cord 0.580 Ribbed RE-139

Tour Velvet BCT Cord 0.600 RE-05

Tour Velvet BCT Cord 0.600 Ribbed RE-140

0.580 round 52.5g

0.580 ribbed 52.5g

0.600 round 50.5g

0.600 ribbed 50.5g

Tour Velvet BCT Cord Red RE-117 0.600 round 50.5g

Tour Velvet BCT Cord Blue RE-118 0.600 round 50.5g

111

GRIPS DD2

dual durometer

PATRIOT

GOLF PRIDE DD2 The DD2 from Golf Pride is a technically advanced, all-rubber grip that combines a firm core for stability with a soft, gold-textured exterior for outstanding comfort and control. The firm, black core material extends to the grip surface in key areas to create a visual thumb-placement guide while providing additional stability throughout the grip. Dual Durometer The Dual Durometer is a high-performance grip, engineered in a breakthrough two-layer thermoset rubber construction. The firm inner layer optimizes control and

DD2 Sky Blue Undersize RE-106 0.580 round 46.5g

DD2 White RE-135

DD2 Red RE-99

DD2 Blue RE-97

0.600 round 49.5g

Dual Durometer RE-74 0.600 round 49g

Dual Durometer Midsize RE-75

Dual Durometer Lite RE-154

0.600 round 56g

0.600 round 39g

Patriot RE-102 0.600 round 46.5g

feedback while the soft, hightraction outer skin maximizes comfort and feel. Patriot The Patriot grip is designed with a uniquely textured surface pattern that includes strategically placed black pebbled bands. These bands,

v-55

along with a supple tri-

vyne

colored rubber construction, provide exceptional traction for added playability. The Patriot is designed for players of all skill levels. V-55 The V-55 offers a soft, high-traction surface pattern with the exclusive hand placement guide for improved performance. VYNE The first grip series designed for female golfers, the VYNE represents a significant step forward in womenâ&#x20AC;&#x2122;s-specific grips. While designed with a supple rubber compound that minimizes shock and discomfort, and a unique visual element creating a guide for hand placement,

112

V-55 RE-76

V-55 Ribbed RE-142

V-55 BCT Cord RE-152

0.600 round 50g

0.600 ribbed 50g

0.600 round 50.5g

V-55 BCT Cord Ribbed RE-153 0.600 round 50.5g

VYNE Undersize Grape RE-109

VYNE Standard Blueberry RE-112

0.580 round 45g

0.580 round 51.5g

VYNE Midsize Strawberry RE-116 0.600 round 58g

Subtle texturing combined with a soft feel provides added touch and comfort that women golfers prefer.

GRIPS GOLF PRIDE

player’s wrap putter grip

tour classic putter grip

tour tradition putter grip

Player’s Wrap Putter The Players Wrap putter grip pairs a smooth paddle front and a half wrap back in a simulated leather wrap, providing added comfort and touch on the greens. Smooth surface wipes clean for reliable performance. Tour Tradition Putter Designed with a smaller, paddle front design, the Tour Tradition putter grips feature the time honored shape used by Tour professionals. Its standard size and all-rubber construction provides increased feel and responsiveness for truer putts. Tour Classic Putter With a large diameter, the Tour Classic putter keeps wrist action to a minimum for

Player’s Wrap Putter RE-149

Tour Tradition Putter Black RE-120

Tour Tradition Putter Blue RE-121

Tour Tradition Putter Red RE-122

Tour Classic Putter Black RE-124

Tour Classic Putter Red RE-125

0.580 76g

0.580 58g

0.580 84g

improved putting accuracy. The rounded back fills the hands comfortably while the flat paddle front promotes a controlled, confident stroke. V-RAD Putter

v-rad putter grip

Designed with Advanced

VELVET PRO SERIES putter grip

jumbo crown putter grip

david leadbetter training grip

David Leadbetter Training Grip RE-157

Composite Rubber, the new V-RAD putter grip enhances feel and durability, while maintaining the performance and quality standards you expect from Golf Pride. Its unique semi-pistol shape fits a wide variety of hand sizes, providing a satisfying feel for truer putts, regardless of your putting style. Velvet Pro Series Putter Medium size all rubber putter with Tour Velvet surface pattern, flat front and pistol back. Jumbo Crown Putter Jumbo-size putter with flat front and pistol back. Leadbetter Training Grip An excellent practice tool for learning and reinforcing the mechanics and feel of proper hand placement on the club.

V-RAD Rivalry USA Putter RE-151

V-RAD Camo Putter RE-150

V-RAD Optik Putter RE-93

Velvet Pro Series Putter RE-156

Jumbo Crown Putter RE-87

0.580 70g

0.580 81g

0.580 65g

0.580 142g

0.600 60g

113

A PASSION FOR THE GAME. A LIFETIME OF INNOVATION.

For over 85 years, Lamkin has crafted superior grips that give golfers a better grasp on their game. Innovative technology, combined with an obsession for golf, goes into every grip we produce and delivers a product that is far superior to any other on the market. Just like golfing legend Arnold Palmer, who has relied on Lamkin grips since his first victory in 1955, our reputation is based on a lifetime of commitment and passion for the game. ARNOLD PALMER

PERMA-WRAP CLASSIC w/3GEN ®

CROSSLINE

PERFORMANCE PLUS w/3GEN ®

E.B.L. PUTTER w/3GEN ®

N-DUR ® w/3GEN ®

Feature patent pending technology designed to dampen vibration, while staying tacky in all weather conditions.

R.E.L. w/3GEN ®

3GEN GRIPS

GRIPS LAMKIN

R.E.L. WITH 3GEN

N-DUR WITH 3GEN

R.E.L. with 3GEN The R.E.L. with 3GEN features Lamkin’s proven functional and innovative 3GEN synthetic rubber compound that can help golfers improve control of their swings. The R.E.L. with 3GEN is Lamkin’s latest premium grip for all woods and irons that combines this revolutionary material with a distinctive surface pattern. Both of these aspects together gracefully allow the golfer to apply very light grip pressure and gain more control of the club throughout the golf swing. N-DUR with 3GEN The revolutionary 3GEN proprietary synthetic rubber compound is paired with N-DUR’s traction-enhancing dual-surface design to create

R.E.L. with 3GEN RL-169 0.600 round 52 g

the most advanced grip

N-DUR with 3GEN White/Black RL-152

N-DUR with 3GEN White/Red RL-153

N-DUR with 3GEN White/Blue RL-154

0.580 round 57 g

on the market today. The

N-DUR with 3GEN White/ Black Midsize (+1/16”) RL-168 0.600 round 68 g

hexagon-patterned back panel promotes light tension and protects hands from twisting at impact while the front comfort panel reduces

PERFORMANCE PLUS WHITE WITH 3GEN

fatigue and promotes an

PERFORMANCE PLUS BLACK WITH 3GEN

ideal grip position to hit the ball longer with increased accuracy. Performance Plus with 3GEN The latest revolution in golf is here. 3GEN maximizes hand traction for a natural grip position. An enlarged grip profile works with 3GEN to improve overall comfort and stability. End result: Hands marry together in a unified grip and produce stronger swings with a higher swing speed, more accuracy and less hand tension.

Performance Plus White with 3GEN Undersize RL-172 0.580 round 53 g

Performance Plus White with 3GEN RL-155 0.600 round 59 g

Performance Plus White with 3GEN Midsize (+1/16”) RL-156 0.600 round 67 g

Performance Plus Black with 3GEN RL-170 0.600 round 55 g

Performance Plus Black with 3GEN Midsize (+1/16”) RL-171 0.600 round 63 g

115

GRIPS LAMKIN

CROSSLINE TOUR

Crossline Tour The Crossline Tour features softer compound and modified crossline pattern for superior comfort with exceptional durability. Hand alignment guide promotes proper hand placement. Crossline Lamkin’s most popular grip. The pattern is recognizable. The performance is unmistakable. The proprietary M2 rubber compound adds tack and reduces stress while the distinctive pattern reduces torque and increases hand traction for the ultimate performance grip. Reformulated materials and softer composition offer tour Crossline Tour 0.580 RL-98

Crossline Tour 0.600 RL-178

Crossline Tour Midsize RL-99

0.580 round 52g

0.600 round 50g

0.580 round 62g

Crossline Tour Oversize (+1/8”) RL-100 0.580 round 77g

Crossline Tour Full Cord RL-101

Crossline Tour Navy Blue RL-133

Crossline Tour Red RL-134

0.580 round 52g

CROSSLINE

116

Crossline Undersize RL-181

Crossline Standard 0.580 RL-07

Crossline Standard 0.600 RL-67

0.580 round 49g

0.580 round 52g

0.600 round 50g

Crossline Standard Ribbed RL-179

Crossline Midsize (+1/16”) RL-17

0.580 ribbed 52g

0.580 round 63g

Crossline Jumbo (+1/8”) RL-19 0.580 round 78 g

performance that’s easier on the hand.

GRIPS LAMKIN Crossline Cord Lamkin’s top-selling grip for woods and irons, it offers a recognizable surface pattern and unmistakable performance. The proprietary rubber compound adds tackiness and durability, while the distinctive surface pattern increases hand traction and reduces torque, making it the ultimate performance grip. A favorite among Tour pros, the all-weather Crossline Cord is layered with a soft cord fabric that maximizes traction. Crossline Black The same quality you’ve come to expect from Crossline in a sleek black version. Perma Wrap Classic with 3GEN The ever-popular Perma-

Crossline Cord 0.580 RL-08

Crossline Cord 0.600 RL-69

0.580 round 52g

0.600 round 52g

Wrap Classic is now available

Crossline Cord Midsize (+1/16”) RL-18 0.580 round 65g

Crossline Black RL-63

Crossline Black Cord RL-180

0.580 round 52g

0.580 round 54g

in a solid white color, made with 3GEN material. PermaWrap Classic Standard White with 3GEN is made with a seamless cylinder mold, as opposed to a two-piece mold. The advantage is

Perma Wrap Classic with 3gen

Perma Wrap Classic

Perma Wrap

the grip doesn’t have to be buffed, so it leaves the grip incredibly tacky. In fact, it’s the tackiest grip Lamkin makes. Perma Wrap Classic The Perma Wrap Classic combines serious performance and a variety of sizes for players who prefer a wrap-style grip. Its non-slip surface is moisture retardant. So you can simply wipe it down and enjoy a completely dry grip. Perma Wrap The Perma Wrap combines serious durability and performance for the player who prefers a wrap-style grip. The exceptional tacky feel and extra traction of the DJ9 compound provides the desired feedback from the clubhead.

Perma Wrap Classic White with 3GEN RL-173

Perma Wrap Classic Standard RL-64

Perma Wrap Classic Mid (+1/16”) RL-65

Perma Wrap Classic Jumbo (+1/8”) RL-66

0.580 round 54g

0.580 round 52g

0.580 round 66g

0.580 round 81g

Perma Wrap Standard RL-32 0.580 round 52g

Perma Wrap Oversize (+3/32”) RL-35 0.580 round 63g

117

GRIPS crossline paddle putter grip

e.b.l. putter grips

jumbo putter grip

Deep Etched Paddle Putter grip

LAMKIN E.B.L. Made of Lamkin’s proprietary 3GEN material, which is Lamkin’s softest synthetic rubber compound that reduces any vibration without dulling the feel of the putt. This allows you to keep your forearms relaxed, apply very light grip pressure and minimize hand tension for smooth, consistent strokes. Crossline Paddle Putter The Crossline Paddle combines the paddle and pistol shapes. Thick around the back and flat on top to round at the end.

E.B.L. Pistol Putter Gray/ Black with 3GEN RL-174

E.B.L. Paddle Putter Red/ Black with 3GEN RL-175

E.B.L. Paddle Putter White/ Black with 3GEN Midsize RL-176

0.580 73g

0.580 76g

0.580 93g

E.B.L. Smooth Pistol White with 3GEN RL-177

Crossline Paddle Putter RL-22

Deep Etched Paddle Putter RL-20

0.580 70g

0.580 77g

0.580 79g

Jumbo Putter RL-09 0.580 112g

Jumbo Putter This extra large putter grip is perfect for big hands or even arthritic hands.

A NOTE ABOUT GRIP CORE SIZES The core size indicates the inside diameter of the grip. Core sizes help match the correct size grip to the shaft. By manipulating the core size in combination with shaft butt diameter, the clubmaker can custom-fit grip sizes to perfectly match the golfer. Most manufacturers indicate the core size of the grip on the inside lip. For instance, a shaft has a butt diameter of 0.600”. To make a Men’s Standard grip size, you would select a 0.600” core grip. However, a Men’s 0.580” grip can stretch over the 0.600” butt diameter. This makes the grip slightly oversized (+1/64”) and is done routinely by clubmakers and golfers alike to produce a little larger grip, but smaller than a midsize. This practice is done in lieu of adding additional wraps of masking tape to increase the grip size. The opposite situation is putting on a larger grip core size than the shaft. For instance, if one would place a Men’s 0.600” grip onto a 0.580” shaft the grip would be loose without stretching the grip down to hold it in place. Stretching the grip further down makes the grip slightly undersized – in this case (-1/64”). This practice can be done to create a grip size for a man with smaller hands. For a full explanation on grip sizing, please consult the Modern Guide to Clubmaking.

118

Deep Etched Paddle Putter These deep horizontal etched patterns on this large paddle style putter provide a uniquely firm feel for a solid stroke.

0.500”

0.560”

0.580”

0.600”

0.500” Standard Junior

0.560” Standard Ladies

0.580” Mens 0.580

0.600” Mens 0.600

Gripology The science of feel.

Quality, Performance , Feel, Hot, Cold, Wet or Dry! Originally designed to complement the best selling custom upgrade shafts in America, UST Mamiya grips are rapidly becoming an essential tool for better players all over the world. Six different combinations of design, compounds and performance requirements ensure the perfect

008 - 2009 -2 2

001

- 20 0

fit and feel for your game. Visit USTMamiya.com

#1 CUSTOM UPGRADE SHAFT IN AMERICA ®

* Based on Golf Datatech survey of annual U.S. aftermarket sales

USAÊÊÊÊÊJAPANÊÊÊÊÊENGLANDÊÊÊÊÊAUSTRALIAÊÊÊÊÊBANGLADESHÊÊÊÊÊCHINA

GRIPS ust-mamiya

pro dc

pro dv cord

Pro DV Cord Innovative compression and injection molding process. Bottom is cord with a torsion control insert on top. Designed for exceptional torsional strength and feel. Pro DC The Pro DC features a dual compound/multi-color/ half-cord design unique to and exclusively developed by UST Mamiya. The Pro DC features a unique 4/3 compound, ofter preferred by better players and avid golfers looking for both torsional strength in the upper hand and a soft, velvety feel in the mid section of the grip.

Pro DV Cord Black/White 0.580 RU-12

Pro DV Cord Black/White 0.600 RU-13

Pro DV Cord Black/Red 0.600 RU-14

0.580 round 51g

0.600 round 51g

Pro DC Black/White RU-06

Pro DC Black/Blue RU-07

Pro DC Black/Red RU-08

Pro DC Black/Gold RU-09

0.600 round 51g

Comp DV Innovative compression and injection molding technique. Designed for exceptional torsional strength and feel. Comp SC Featuring a select compound/ multi-color design, UST Mamiya designers utilized

comp dv

only the finest quality natural

comp sc

rubber available to create this unique grip. The three quarter wrap in the upper section provides low torque as well as the ultimate in traction and feel.

120

Comp DV Cord White/ Black 0.580 RU-15

Comp DV Cord White/ Black 0.600 RU-16

Comp DV Cord Black/ Red 0.600 RU-17

0.580 round 50g

0.600 round 50g

Comp SC Black/White RU-02

Comp SC Black/Blue RU-03

Comp SC Black/Red RU-04

Comp SC Black/Gold RU-05

0.600 round 50g

GRIPS ust-mamiya

tour pc

st1 putter grip

Tour PC Premium compound grips. These grips provide a velvet soft feel in an exceptionally torsionally tight, long lasting grip. ST1 Putter Grip Soft touch surface produces unique feel. Features polyurethane material and three distinct sizes to fit all golfers.

Tour PC Black RU-01

Tour PC White RU-10

0.600 round 51g

0.600 round 55g

Tour PC Black Midsize RU-11

ST1 Putter Standard RU-18

ST1 Putter Midsize RU-19

ST1 Putter Jumbo RU-20

0.600 round 68g

0.600 60g

0.600 76 g

0.600 99 g

TACKI-MAC

ITOMIC IT2

Itomic IT2 Itomic iT2 incorporate negative ions with a velvet surface combined with a new proprietary, ultra -tacki, ultra lightweight compound for a very unique look and feel for golfers. The men’s standard is smaller than original Itomic line of grips. Like the original Itomic grip they are made from a revolutionary blend of thermoforming materials is both very durable and high performing in all weather conditions. Itomic IT2 grips maintain their tacky feel and clean easily with warm soapy water.

Itomic IT2 Black RT-21

Itomic IT2 Black Midsize RT-22

Itomic IT2 White RT-29

Itomic IT2 White Midsize RT-30

0.600” round 46g

0.600” round 50g

0.600” round 46g

0.600” round 50g

121

GRIPS itomic

TACKI-MAC Itomic The Itomic line of grips incorporate a velvet surface, combined with a proprietary, ultra tacky elastomeric compound for a very distinctive look and more importantly feel. Itomic Wrap The traditional perforated wrap style pattern provides a maintenance-free, ultra-tacky surface for superior traction and performance. Tacki-Mac Standard Computer-designed, non-slip surface pattern for a soft, non-abrasive feel, enhanced comfort and “grabby surface”.

Itomic Black RT-13

Itomic Blue RT-14

Itomic Red RT-15

Itomic White RT-16

0.600 round 54g

0.600 round 55g

0.600 round 54g

Itomic Black Midsize RT-17

Itomic Blue Midsize RT-18

Itomic Red Midsize RT-19

Itomic White Midsize RT-20

0.600 round 58g

itomic wrap

Itomic Wrap Black RT-23 0.600 round 53g

122

Itomic Wrap Itomic Wrap Black Midsize Black Jumbo RT-24 RT-25 0.600 round 57g

0.600 round 68g

Itomic Wrap White RT-26 0.600 round 53g

tacki-mac classic

Itomic Wrap Itomic Wrap White Midsize White Jumbo RT-27 RT-28 0.600 round 57g

0.600 round 68g

Mens Mens Oversize Arthritic Standard #10 #13 (+3/64”) Oversize #27 RT-01 RT-05 (+3/32”) RT-12 0.580 round 0.600 round 51g

57g

0.600 round 71g

Tacki-Mac Arthritic The unique serrated design and soft compound gives outstanding control and feel for anyone looking for a 3/32” oversized grip. Excellent for golfers with weaker hand strength.

GRIPS avon

pro d2x

Pro D2x Pro D2x is a dual-molded compound boasting a firm rubber upper and softer rubber lower section in a dual-color design. The Pro D2x grip supports the strongleft, weak-right philosophy of gripping a golf club. The firm rubber, all-weather lower section combines comfort, feedback and feel for a true connection between the player and the club. Pro D2x Half-Cord The same dual molded constructions as the Pro D2x, but with soft cord infused into the upper half of the grip for superior control.

Pro D2x White/Black RA-19

Pro D2x Blue/Black RA-14

Pro D2x Yellow/Black RA-15

Pro D2x Orange/Black RA-16

Pro D2x Green/Black RA-17

0.580 round 50g

Pro D2x White/Black Half-Cord RA-20

Pro D2x Blue/Black Half-Cord RA-18

0.580 round 50g

Chamois The Original Chamois design with its innovative Air-Cushioned Absorption System (ACAS) continues to set the grip standard in comfort and control for over two decades. Because of it’s soft supple feel it is preferred by golfers in need of arthritic

chamois

nexus

relief. Nexus Nexus is the all weather favorite because of it’s firm responsive feel in all conditions. A combination of high-tech compound and high performance design.

Chamois Mens Black RA-01 0.580 round 55g

124

Chamois Jumbo Black (+3/32”) RA-07

Chamois Ladies Charcoal RA-04

0.600 round 66g

0.560 round 39g

Nexus RA-09 0.580 ribbed 52g

GRIPS WINN

WINNLITE SOFT

WINNLITE MEDIUM

WinnLite WinnLite grip technology was developed for golfers who are looking for longer distance, more accurate shots, and higher ball flight. WinnLite grips translate to lighter club weight which equals faster swingspeed, resulting in increased distance. WinnLite grips will give you better clubhead feel for more accurate shotmaking and increase your launch angle resulting in a higher ball flight. WinnLite Soft is comprised of V17-Soft material for ultimate comfort, shock absorption and feel. WinnLite Medium is comprised of V17 material for all around feel and performance. WinnLite Firm is comprised of PolyCord material for high performance. PCi Triple Line

WinnLite Soft WinnLite Soft WinnLite Soft WinnLite Soft Standard Lady Standard Lady Standard Standard Hero RW-116 White RW-103 RW-118 RW-117 0.580 round 0.600 round 0.600 round 20g

Designed with the tour player

0.580 round 20g

25g

WinnLite Soft Midsize (+1/16”) RW-104

WinnLite Soft Midsize Hero (+1/16”) RW-119

WinnLite Soft Oversize (+1/8”) RW-105

0.600 round 28g

0.600 round 25g

0.600 round 37g

WinnLite Medium RW-106 0.600 round 25g

WinnLite Medium Midsize (+1/16”) RW-107 0.600 round 25g

in mind while improving play for golfers at any level. The grip’s innovative Triple Line embossing pattern and firm yet comfortable feel particularly favors players

PCI TRIPLE LINE

WINNLITE FIRM

with high swing speeds while offering unmatched response and control for all shotmakers. This durable grip performs in all weather conditions.

WinnLite Firm WinnLite Firm WinnLite Firm WinnLite Standard Standard Standard Hero Firm Midsize Black White RW-120 (+1/16”) RW-108 RW-109 RW-110 0.600 round 0.600 round 26g

0.600 round 26g

26g

0.600 round 28g

PCi TL Black RW-80

PCi TL Blue RW-81

PCi TL Red RW-82

0.600 round 50g

PCi TL Midsize (+1/16”) RW-83 0.600 round 54g

PCi TL Oversize (+1/8”) RW-84 0.600 round 58g

125

GRIPS PCI

WINN

PCI HYBRID

PCi PCi is designed for golfers who desire ultimate control without sacrificing comfort. The V17 polymer is combined with a cord underlayer that results in a firm feel and superior performance. PCi Hybrid Horizontally positioned black polymer cord in the thumb area provides optimum texture to prevent slippage while vertically positioned cord underneath the grip delivers torque resistance. DSi For players who prefer a soft, comfortable grip with all-weather playability. The PCi Black RW-58 0.600 round 50g

PCi Black Ribbed RW-127 0.600 ribbed 50g

PCi Copper RW-59 0.600 round 50g

PCi Half-Cord Black RW-60

PCi Hybrid Black RW-62

PCi Hybrid Black/Red RW-61

0.600 round 50g

PCi Hybrid Black/Red Ribbed RW-128 0.600 ribbed 50g

PCi Hybrid Midsize RW-63 0.600 round 52g

PCi Hybrid Oversize (+1/8”) RW-64 0.600 round 55g

DSI

DSi Lady Black RW-76 0.580 round 41g

126

DSi Black RW-98

DSi Black/Red RW-55

0.600 round 50g

DSi Midsize (+1/16”) RW-56

DSi Oversize (+1/8”) RW-78

0.600 round 52g

0.600 round 57g

new Dura-Soft Integration (DSi) grip line utilizes Winn’s V17 material to deliver both comfort and performance.

GRIPS WINN

XI7

XI7 JUNIOR

Xi7 Designed for higher swing speeds, the new Xi7 features a highly textured, firm feel with optimum torque resistance resulting in a cord-like feel while minimizing hand-wear and fatigue. Xi7 Junior Xi7 junior grips feature Excel Soft material for feel and comfort for junior golfers. The 0.550” core works well on both 0.500” and 0.560” shafts.

Excel Winn’s original grips remain as popular as ever. Classic grip models actually become tackier in damp or humid conditions. These are available in two different firmnesses; soft (formerly

Xi7 XF Black RW-48

Xi7 XF Blk/Red RW-49

0.600 round 50g

Xi7 XF Midsize (+1/16”) RW-50

Xi7 XF Oversize (+1/8”) RW-79

0.600 round 52g

Xi7 Excel Soft Junior Blue RW-72

Xi7 Excel Soft Junior Orange RW-73

0.550 round 32g

0.600 round 57g

RF) and medium (older XF). The Excel Wedge grip provides added length to give players more options to fine-tune their hand positions according to the distance and difficulty of each shot.

EXCEL SOFT

Excel Soft Undersize Black RW-99 0.600 round 38g

Excel Soft Black RW-08

Excel Soft Tan RW-100

0.600 round 42g

Excel Soft Black Midsize (+1/32”) RW-21 0.600 round 43g

Excel Soft Copper Midsize (+1/32”) RW-114 0.600 round 43g

Excel Soft Black Oversize (+1/8”) RW-95 0.600 round 47g

Excel Soft Copper Oversize (+1/8”) RW-115

Excel Soft Wedge Grip RW-74 0.590 round 52g

0.600 round 47g

127

GRIPS EXCEL MEDIUM

EXCEL AVS AI

WINN

G8 RAVE

Excel AVS AI The Excel material meets Winn’s new AI technology. AVS technology uses a sheet of grip material to enclose the underlisting lengthwise, resulting in a vertical seam that seals the grip on the backside. AI Technology allows joining and combining of different materials, colors, textures, and degrees of firmness in one grip. G8 Rave The G8 Rave features marble technology: striking colors and fresh designs while offering signature G8 comfort, control, durability, tackiness, and all-weather playability. Golfers can now express Excel Medium Black RW-23 0.600 round 42g

Excel Medium Black Midsize (+1/32”) RW-97

Excel AVS AI Lady Black/ Light Blue RW-75

Excel AVS AI Lady Black/ Pink RW-40

0.600 round 43g

0.580 round 41g

0.580 round 40g

Excel AVS AI Graphite/Red RW-39 0.600 round 50g

G8 Rave Lady RW-53

G8 Rave RW-96

0.580 round 40g

0.600 round 50g

themselves on the golf course with high performance and visual flair. Medallist Pistol Putter The most popular Tour, OEM and aftermarket putter shape. Soft, tacky Excel material combines with AI technology which integrates different

pro pistol putter grip

textures and colors.

medallist pistol putter grip

NEW HERO GRIPS FROM WINN

128

Triple Line Pro Pistol Putter Red/White/ Blue RW-126

Triple Line Medallist Pistol Putter Hero RW-121

0.590 64g

0.590 60g

Triple Line Medallist Pistol Putter RW-111 0.590 60g

Excel Medallist Pistol Putter Black RW-65

Excel Medallist Pistol Putter Black/Pink RW-122

0.590 57g

In deference to our brave men and women in uniform, Winn’s camouflage green/ khaki Hero grips combine high performance with a worthy cause. A portion of all Winn Hero grip sales proceeds will go to the Troops First Foundation to recognize, honor, and support our U.S. soldiers who have risked life and limb for this nation.

GRIPS WINN

MIDSIZE PISTOL PUTTER GRIP

JUMBO PISTOL PUTTER GRIP

Midsize Pistol Putter A thicker version of the Medallist Pistol for those who prefer midsize grips. The soft, tacky Excel polymer optimizes feel and comfort for confidence on the greens. Jumbo Pistol Putter The jumbo is quickly gaining popularity on the Tour and with OEMs. The soft, tacky Excel polymer provides excellent feel and comfort for confidence on the greens. Giant Pistol Putter The Giant Pistol putter is Winn’s largest putter offering. This colossal grip helps stabilize your stroke by eliminating wrist movement while promoting a smooth tempo. The soft, tacky Excel polymer optimizes feel and comfort for confidence on the greens.

Triple Line Triple Line Excel Midsize Excel Midsize Midsize Pistol Midsize Pistol Pistol Putter Pistol Putter Putter Hero Putter Black Red/White/ RW-124 RW-112 RW-66 Blue RW-123 0.590 0.590 0.590 79g

79g

75g

0.590 76g

Triple Line JumboLite Pistol Putter RW-113

Excel Jumbo Pistol Putter Black RW-67

Excel Jumbo Pistol Putter Blue RW-92

Excel Jumbo Pistol Putter Red RW-93

0.590 62g

0.600 124g

Excel Lite Jumbo Pistol Putter Red/ White/Blue RW-125 0.600 60g

Long / Belly Putter These extra long grips are perfect for either long or belly putters. giant PISTOL PUTTER GRIP

Excel Giant Pistol Putter RW-89 0.600 270g

Excel Giant Pistol Putter USA RW-90 0.600 270g

long / belly PUTTER GRIP

21” Round Belly Putter RW-91

Two-Piece Long Putter RW-22

0.600 144g

0.620 45g / 90g

21” Red/Black Pistol Belly Putter RW-20 0.600 155g

129

ANIMAL HEADCOVERS

TAKE A WALK ON THE WILD SIDE

New 2011 animal headcovers are whimsical, functional and priced just right. Why put any boring old headcover in your bag? Let your personality show with these fun animal headcovers. As always, Hireko brings you the best quality products affordably. You wonâ&#x20AC;&#x2122;t find better animal headcovers close to this price. Available in a variety of fun species and styles. Fits drivers up to 460cc.

130

Parrot Headcover #AHCA-001

Tiger Headcover #AHCB-001

Dalmation Headcover #AHCC -001

Warthog Headcover #AHCD-001

Beagle Headcover #AHCE-001

Lion Headcover #AHCF-001

Mallard Duck Headcover #AHCI-001

Bald Eagle Headcover #AHCJ -001

Gorilla Headcover #AHCK-001

Raccoon Headcover #AHCL-001

Penguin Headcover #AHCM-001

Gator Headcover #AHCN-001

Dolphin Headcover #AHCO -001

Emperor Penguin Headcover #AHCQ-001

Donkey Headcover #AHCR-001

Gopher Headcover #AHCS-001

HEADCOVERS & MORE

Acer Driver Headcover Single #HCZD3563-001

Power Play Driver Headcover Single #HCZD3562-001

Dynacraft Driver Headcover Single #HCZD3564-001

Dynacraft ICT Driver Headcover IBella Bellissima Driver Headcover Synchron Fairway Headcover Single Single Single with four tags (#3, 5, 7, 9) #HCZD3271-001 #HCZD3136 #KT01SS-0FW

Acer Fairway Headcover Power Play Fairway Headcover Dynacraft Fairway Headcover Single with four tags (#3, 5, 7, 9) Single with four tags (#3, 5, 7, 9) Single with four tags (#3, 5, 7, 9) #HCZD3563-0FW #HCZD3562-0FW #HCZD3564-0FW Acer Hybrid Headcover Single with individual tags Available #1-9, PW, SW #HCZDHY3563

Power Play Hybrid Headcover Single with individual tags Available #1-9, PW, AW, SW #HCZDHY3562

Black Sock Headcover 3-pc Set (Driver, #3, X) #HCSBK

Dynacraft Hybrid Headcover Single with individual tags Available #3-9, PW, AW, SW #HCZDHY3564

Pink Sock Headcover 3-pc Set (Driver, #3, X) #HCSPK

No Logo Contour Driver Headcover Single #KT01S

IBella Bellissima Fairway HC Individually numbered (#3, 5, 7) #HCZD3271-0FW IBella Bellissima Hybrid Headcover Individually numbered (#3, 4, 5, 6) #HCZDHY3271

No Logo Fairway Headcover Individually numbered (#3, 5, 7, 9) #KT01-3/5/7/9

Wood-Style Hybrid Headcover Individually numbered (#1-9, PW, SW) #KT01HY

Iron-Style Hybrid Headcover Individually numbered (#1-9, PW, SW) #KT01Y

CABRETTA LEATHER GOLF GLOVES Tour Gear Cabretta Golf Glove Soft cabretta leather glove with mesh lining for comfort and breathability. Note: LH glove is for right-handed golfers and vice-versa.

Utility Fur Headcover Single with four tags (15°, 18°, 21°, 24°) #KT01D

Neoprene Iron Headcover Individually numbered (#3-9, PW, SW, AW, LW) #PCZD1391

Acer CB Putter Headcover Single #KT01CB

iBella Tiara Putter Headcover Single #KT01IB

Mens Small (LH only) Mens Medium (LH & RH) Mens Medium-Large (LH & RH) Mens Large (LH & RH) Mens XL (LH & RH) Mens Cadet Medium (LH only) Mens Cadet Large (LH only) Mens Cadet XL (LH only) Ladies Medium (LH only) Ladies Large (LH only) Ladies XL (LH only) #TGGLV

Economy Cabretta Golf Glove Full cabretta leather glove features excellent fit and comfort.

Neoprene Mallet Putter Headcover Single #KT01W (Standard) #KT01BW (Oversized)

Neoprene Blade Putter Headcover Single #PCZD2123

Mesh Blade Putter Headcover Single #KT01F

Men’s Medium (LH only) Men’s Medium-Large (LH only) Men’s Large (LH only) Men’s XL (LH only) Men’s Cadet Medium (LH only) Men’s Cadet Large (LH only) Ladies Medium (LH only) Ladies Large (LH only) #GLV

131

THE BEST VALUE IN GOLF ACCESSORIES

TGPP1

Steel Pull Cart

TGJR01

Junior Golf Cart

TGTC5B

Itâ&#x20AC;&#x2122;s the little things that can improve the game. Tour Gear golf accessories help you maintain your clubs, improve your swing, and make your play on the course perfect regardless of where you play.

Three Wheel Push Cart

Featuring sturdy steel construction,

Constructed from sturdy lightweight steel,

Why pull when you can push? Easier to steer, easier on your arms, and

handle designed to the shape of your

our Junior Cart glides easily over the

more stable overall. Folds for easy portability. Lightweight aluminum design

hand, scorecard holder, a place for your

fairways. Also contains a water bottle and

includes two ball holders, scorecard/pencil holder, and tee holder.

balls and tees and water bottle and

holder to keep your junior hydrated. One

holder. One step collapsible design.

step collapsible design.

TGAC104

TGAC102P

TGAC102A

TGAC311

15â&#x20AC;&#x2122; Golf Ball Retriever

Golf Ball Pickup Tube

Golf Ball Shag Bag

Rubber Golf Ball

Adjustable shaft extends to

A quick and easy way

Stop bending over

Pickup

15 feet. Scoop style head is

to pick up your practice

to pick up balls! Our

Just attach to your

perfect to retrieve balls from

balls. Holds up to 20

new Shag Bag comes

grip for easy pick up

the water or gnarly rough.

golf balls.

equipped with an

of your balls. No more

oversize pocket for easy

bending over!

storage of accessories and an aluminum tube for long lasting durability.

132

TGAC121 Portable Flag with Cup Designed to simulate live playing conditions, our Portable Flag and cup sets up in minutes. The three sections lock together to make an authentic flagstick. Flag constructed of heavy duty nylon.

TGAC118 Oversized Driving Net

TGAC103 Chipping Net

TGUM112

Turn you backyard into a driving range

A great practice aid to improve your

62” Deluxe Golf Umbrella Black

with our Oversized Driving Net. Use your

chipping with the durable nylon netting

62 inches of wind busting construction.

full swing with actual balls. Easy to setup

on a weather resistant tubular frame

Push button auto-open feature allows

and 10’ x 8’ x 5’ dimensions.

construction. The angle of the 18”

easy, effortless opening.

diameter net is fully adjustable to make shots easy or more difficult.

TGAC205 Putting Cup

TGAC302 Electric Putting Cup

TGAC305 Three Rubber Tees White

TGAC338 Glove Keeper

Durable plastic putting cup catches

Improve your putting with our convenient

These high-quality and durable tees are

Retain the original shape of gloves with

ball and keeps it in place. Work on your

Electric Putting Cup with automatic ball

made tough to stand many a beating.

our new Glove Keeper. Attaches easily to

putting game anywhere!

return. Includes regulation size putting

Each pack contains three rubber tees (1

your bag and retains the original shape

cup perfect for home or office.

each 1.5 inches, 1 each 1.75 inches and

of your glove in between rounds.

1 each 2 inches.

TGAC341 Spray Brush

TGAC362 3-in-1 Pocket Brush

TGAC417

TGAC309 3-in-1 Divot Tool

Get your clubs cleaner with the spray

Nylon bristles for cleaning woods, brass

Two-Sided Cleaning Brush

The ultimate divot tool! A ball marker,

brush, which contains a handy refillable

brisltes for irons and a spike for cleaning

Features nylon bristles on one side for

divot tool and spike wrench all in one!

spray bottle. Clip securely fastens to

grooves are contained in one easy to use

woods and brass bristles on other for

bag for quick access.

tool. Fits easily in your pocket!

irons. Great cleaning tool with clip to attach to bag.

White Golf Tees

TGAC331

TGAC312C

TGAC307

TEE2340100 - 100 pcs 2.3/4” Golf Tees

PU Foam Practice Golf Balls - 6 pack

Practice Golf Balls w/Holes - 12 pack

Ball Markers - 15 pack

TEE2340500 - 500 pcs 2-3/4” Golf Tees

Want to practice near your home or

Practice anywhere with our perforated

You won’t find a better deal on a pack

TEE3140100 - 100pcs 3-1/4” Golf Tees

fragile surroundings? These Foam

plastic balls. Flies like a real golf ball!

of ball markers. Throw them in your bag

TEE3140500 - 500 pcs3-1/4” Golf Tees

Practice Golf Balls allow you to play

and keep the change in your pocket!

anywhere, even near glass windows!

Package includes 12 markers.

133

CLUBMAKING TOOLS & SUPPLIES

epoxy Tips

Shafting Epoxy

One Club Packet EPS

Epoxy Mixing Cups MIT054

8 or 16 oz. Kit

4 oz. Kit

Glue Gun EPGUN Tube

Epoxy Mixing Sticks MIT048

Model #

Usage

Size

EP03

24 Hour Epoxy

16 oz. Kit

For all standard assembly

3000 psi

1:1

20 minutes

3 hours

24 hours

EP01

24 Hour Epoxy

4 oz. Kit

For all standard assembly

3000 psi

1:1

20 minutes

3 hours

24 hours

Mis Ratio

Pot Life

Set Time

Curing Time

24 hours

EPS

24 Hour Epoxy

One-Club Packet

For all standard assembly

3280 psi

1:1 premix

20 minutes

3 hours

EPCART

24 Hour Epoxy Tube

1.5 oz. Tube

Slightly higher viscosity for graphite shafts

3000 psi

1:1 premix

1 minute

3 hours

24 hours

8POLYAHB

Fast Setting Epoxy

8 oz. Kit

Fast setting epoxy with good strength

3000 psi

1:1

1 minute

5 minutes

30 minutes

EP04

5 MInute Quickset Epoxy

1.0 oz. Tube

For quick repairs on putters and emblems

1500 psi

1:1

1 minute

5 minutes

24 hours

EP05

24 Hour Epoxy

1.0 oz. Tube

For all standard assembly

4500 psi

2:1 premix

20 minutes

3 hours

24 hours

EP06

5 Minute Quickset Epoxy

1.5 oz. Tube

Fast setting epoxy with good strength

2900 psi

1:1

1 minute

5 minutes

24 hours

EPGUN

Glue Gun

Gun applicator for use with EPCART & EP04

MIT054

Epoxy Mixing Cups

100 cups marked in oz, tbsp, & mL

MIT048

Epoxy Mixing Sticks

100 sticks for mixing & applying epoxy

THE MOST AFFORDABLE FITTING SYSTEM IN THE WORLD In the past, custom clubmakers have relied on storing dozens if not a hundreds of demo clubs to fit potentially any customer that would walk into their shop. Not only is finding ample storage a logistical nightmare, but there is also the high cost of a head, shaft and grip for each club. Providing your customer with choice quickly became cost prohibitive. Now anyone can custom fit quickly and affordably with the QuikFit system. The QuikFit adapter is epoxied onto any standard parallel tipped iron or wood shaft, which can be interchanged with a selection of specially-bored 6 irons and drivers from this catalog. Screw the adapter into the head and in seconds you can hit real golf balls. When you are done, unscrew and put in another clubhead. Want to fit shafts instead of clubheads? Simply purchase more cost-effective Quikfit adapters and install them onto multiple shafts. With just a few adapters, you have a huge combination of possibilities. You can now stock in a very small footprint what used to take up a whole section of your shop. The weight of the head plus the QuikFit adapter is virtually identical to a standard head weight, providing nearly identical results to an actual club.

#QF-001-I QuikFit for Irons (0.370” bore) #QF-001-W Quikfit for Woods (0.335” bore)

134

Lap Shear Strength

Description

LOOK FOR THIS ICON

fitting for clubhead

clubhead A

clubhead B

clubhead C

fitting for shaft shaft A

shaft B

shaft C

CLUBMAKING TOOLS & SUPPLIES

Ferrules & Stuff

Less time, less fuss, our new ferrules are designed to fit our products right without spending time to finish them off. Three matching sizes are available in each color and length; Titanium Drivers (12.6mm base), Stainless Fairways (12.2mm base) and Irons (13.6mm base). The FR1013TG is designed to fit the Tour Gear irons or any iron that requires a 14.8mm base. Sold 12 per package.

Silver Ring FR1026 Iron FR1027 Driver FR1027F Fairway

Gold Ring FR1020 Iron FR1021 Driver FR1021F Fairway

Pink Ring FR1032 Iron FR1033 Driver FR1033F Fairway

Purple Ring FR1036 Iron FR1037 Driver FR1037F Fairway

Blue Ring FR1022 Iron FR1023 Driver FR1023F Fairway

Red Ring FR1024 Iron FR1025 Driver FR1025F Fairway

1/8” Black FR1009 Iron FR1010 Driver FR1010F Fairway

Hosel Plug Prevents epoxy from entering the inside of a hollow head. Incorporates an easy to grip pin that can be held during placement of the plug or during removal and resetting, making them much more user friendly than those preinstalled from the foundry. Fits 0.335” ID. Pack of 20. #HP335

OEM REPAIR CENTER

UNIVERSAL FERRULES

Through-Bore Plugs Tapered plugs for finishing through-bore heads with graphite shafts. Specify for graphite or steel shafts. 25pcs per package. #TBP - plug for graphite #TBP1 - plug for steel

0.350” Wood Ferrule 1/2” Non-Collared Ferrules .350” x .545”. Pack of 12. BB001 0.350” Shaft Conversion Ferrule The shaft conversion ferrule fits into the 0.350” bore to allow for standard 0.335” shaft. Pack of 4. FR1017 Wood Bushing Ferrules Hand sand to allow 0.335” shafts to fit woods with 0.365” to 0.405” hosels. Pack of 4. BWF

1/4” Black FR1011 Iron FR1012 Driver FR1012F Fairway

1/2” Black FR1013 Iron FR1014 Driver FR1014F Fairway FR1013TG Iron

3/4” Black FR1015 Iron FR1016 Driver FR1016F Fairway

CALLAWAY Metal Sleeve Kit for Callaway I-MIX Install a permanent shaft on Callaway’s I-MIX heads. Kit includes metal sleeve adapter, 0.350” adapter, 0.335” adapter, 2º adjustable clock ferrule BB003 2° Ferrule for Callaway Woods Reshaft VFT, ERC II, Great Big Bertha II, Steelhead III, Fusion, 454, 460X, FT-i and FT-5 with 0.335” shaft plus allow for 2° adjustments. Sold individually. BB002

Iron Bushing Ferrules Hand sand to allow 0.370” shafts to fit irons with 0.395” to 0.405” bores. Pack of 4. BFI

Ferrule for Callaway Woods Reshaft VFT, ERC II, Great Big Bertha II, Steelhead III, Fusion, 454, 460X, FT-i and FT-5 with 0.335” or 0.350” shaft. Sold individually. VFT (for 0.335” shafts) VFT350 (for 0.350” shafts)

Ferrule for Nike Woods Reshaft Nike Sasquatch or Sumo driver with 0.335” shaft. Pack of 4. BB008 (for Sasquatch) BB009 (for Sumo)

Ferrule for Callaway FT-iz Woods Re-shaft Callaway FT-iz driver or fairway woods with 0.335” shaft. Sold individually. BB006 (for drivers) BB007 (for fairway woods)

NIKE

PING 2° Ferrule for Ping (&Taylor Made) Woods Re-shaft Ping G2, G5 and G10 drivers and allow for 2º adjustments. Uses 0.335” shaft. Sold individually. BB016 Ferrule for Ping G Series Woods Fits Ping G2, G5, G10, Rapture and Rapture V2 driver and fairway woods with a 0.335” or 0.350” shaft. Pack of 4. BB010 (for 0.335” shafts) BB011 (for 0.350” shafts) Conversion Ferrule for Ping ISI Drivers Re-shaft Ping T ISI, Tec & SI3 RH titanium drivers with 0.335” shaft. Sold individually. ISI

Ferrule for Callaway Diablo Hybrid Re-shaft Callaway Diablo hybrid with 0.370” shaft. Sold individually. BB004

Ferrule for Callaway FT Hybrid Re-shaft Callaway FT hybrid with 0.370” shaft. Sold 4 per pack. BB005 Ferrule for Callaway Irons 1/8” Tall “Wide” Collar Ferrules fits most old and new Callaway irons with a 0.370” shaft. Sold in pack of 12. FR201

TAYLOR MADE

Chrome Cleaner Removes heat marks left on the hosel after shaft removal. Works on all metal. 5 oz. #CHROME

Shafting Beads Aligns, centers and cushions shaft. Eliminates off-center shafts and uneven bonds. Add to mixed epoxy 4-6% by volume. #SB

Rattle Stop Eliminates head rattles by trapping loose debris. Put a few drops inside the hosel and allow it to flow inside the head. Ultra-tacky, one-part glue never cures. No mixing required. #RS

2° Ferrule for Taylor Made (& Ping) Woods Re-shaft TaylorMade R7 / R5 / New Burner / Superquad drivers and allow for 2º adjustments. Uses 0.335” shaft. Sold individually. BB016 Taylor Made R9 Shaft Sleeve Replaces adjustable sleeve on R9 models with 0.335” shafts. Makes the same 2° adjustments as original sleeve. R9SLV Taylor Made R9 Head Screw Replacement Screws for the R9 and Super Tri Heads, they also fit the TaylorMade Wedge Face Insert Plates. BB015

Ferrule for Taylor Made Woods Fits TaylorMade R7 / R5 / New Burner / Superquad driver with a 0.335” or 0.350” shaft. FR200 (for 0.335” shafts) sold individually BB012 (for 0.350” shafts) sold in pack of 4 Ferrule for Taylor Made R7 Irons Re-shaft TaylorMade R7 and R9 irons with a 0.370” shaft. Sold in pack of 12. BB013 Ferrule for Taylor Made RAC Irons Re-shaft TaylorMade RAC HT, CGB, OS and LT irons with a 0.370” shaft. Sold in pack of 12. BB014 Taylor Made Weight Screws Fits TaylorMade R5, R7, R9 plus Monza putters Model # R9WT-002 R9WT-005 R9WT-008 R9WT-010 R9WT-012 R9WT-014 R9WT-016

Description Taylor Made 2g Screw Taylor Made 5g Screw Taylor Made 8g Screw Taylor Made 10g Screw Taylor Made 12g Screw Taylor Made 14g Screw Taylor Made 16g Screw

135

CLUBMAKING TOOLS & SUPPLIES

THE CLUBMAKING TOOL YOU’VE BEEN WAITING FOR The Ferrule Block is the breakthrough device to save you time and money

The Ferrule Block is more than just a fast, efficient way of installing ferrules onto

the shaft; it is an indispensable combination measuring tool that will become a mainstay on any clubmaker’s workbench.

The top of The Ferrule Block features a counter-bored recess for the ferrule

to sit without slipping and will accept all standard sized ferrules from 0.335” to oversized 0.370” iron ferrules. Once you have started the ferrule onto your shaft, simply push down until the shaft is seated into The Ferrule Block. Now the ferrule is installed safely enough onto the shaft that you can use the head to drive it on the rest of the way.

The Ferrule Block is also a handy measurement tool to help identify the most

common sized tip and butt diameters used in the industry today. Measure butts and tips quickly and accuracy.

Whether you are installing ferrules or identifying shaft tip or butt diameters, The

Ferrule Block will become your most trusted and used tool in your shop!

place the ferrule into the recess and tamp down to seat onto the shaft

#FBLOCK

left side gauge checks tip diameter right side gauge checks butt diameter

Counterweights

Weight Plugs & Lead Tape

Screw Weights

The overall balance of a golf club is very important to achieve the optimal results by producing more solidness of contact, consistency, speed and greater distance. A club that is overall too head-heavy is difficult to return the club to a square position. In addition, it may encourage a player to release the club too early in the downswing and rob a player of valuable distance. Counter-balance plugs can help solve these problems by shifting the balance point of the club closer to the hands and helping the club swing faster. They are also great for over-length clubs. Simply insert into the butt end of the shaft prior to installing the grip. Specify steel or graphite shaft. The models for steel will fit shafts with a 0.600” butt or larger.

Use weight plugs to add weight to your clubs. All plugs are inserted into the tip end of the shaft. Lead tape may be placed anywhere on the clubhead to fine-tune swingweighting and clubhead performance.

These allen weight screws fit the Power Play System Q line of woods, irons, wedges & chipper, as well as the Acer CB Putters. The 4mm allen wrench works with all weights listed below.

Model #

Usage

CWG08-001

Graphite 8g

CWG12-001

Graphite 12g

CWG16-001

Graphite 16g

CWG20-001

Graphite 20g

CWG24-001

Graphite 24g

CWG28-001

Graphite 28g

CWG32-001

136

Plug for Graphite Shafts

Plug for Steel Shafts

NOTE: 4g = 1 swingweight

counterweights fit right into the butt of the shaft

Lead Tape

Graphite 32g

CWS08-001

Steel 8g

CWS12-001

Steel 12g

CWS16-001

Steel 16g

CWS20-001

Steel 20g

CWS24-001

Steel 24g

Model #

Usage

Material

Qty per Pack

Model #

Weight / Description

Material

Length

Dot Color

BW15I3

Fits steel iron shafts

Brass

30 pcs

AASCREW2G

2 gram

Aluminum

11 mm

none

BW15I5

Fits steel iron shafts

Brass

30 pcs

ASSCREW4G

4 gram

Steel

8 mm

Black

BW15I7

Fits steel iron shafts

Brass

30 pcs

ATSCREW6G

6 gram

Tungsten

9 mm

White

BW15W3

Fits steel wood shafts

Brass

30 pcs

ATSCREW8G

8 gram

Tungsten

10 mm

Yellow

BW15W5

Fits steel wood shafts

Brass

30 pcs

ATSCREW12G

12 gram

Tungsten

14 mm

Red

BW15W7

Fits steel wood shafts

Brass

30 pcs

4MMWRENCH

4mm allen wrench

ASCRKIT1

Kit of 4g, 6g, 8g, 12g, Wrench

LWGI

Fits graphite shafts

Lead

30 pcs

LWGW

Fits graphite shafts

Lead

30 pcs

LT100

Lead Tape - 100” Roll

Lead

single

CLUBMAKING TOOLS & SUPPLIES Gripping Supplies

Double Sided Grip Tape Solvent activated grip tape. #SG075 - 3/4” x 36 yards #SG200 - 2” x 36 yards

Pip Strip Pre-cut, individual 2” wide by 10” long strips of either solvent or water activated grip tape.

Grip Tape Dispenser Heavy duty grip tape dispenser can be used free standing or bolted down. Winds tape liner onto a spool as you pull the tape. Saves time when gripping clubs.

#PIP - Solvent based strip #IWT - Water activated strip

#MIT-027

MIT029

MIT028

NSH

Grip Solvent Non-flammable, nontoxic grip solvent. Easy pour quart container. #BGSV

Grip Remover Gun Loosens the grip for easy removal by injecting solvent through a needle #MIT029 - Grip Remover Gun with Needle #MIT028 - Replacement Needle (single) #NSH - Needle Saver Hose

Grip Tape Remover Tool This lightweight precision machined aluminum tool removes the grip tape quickly & easily. The blade can be resharpened for extended use. #MIT-030

gripping tips

The Grip Rip The professional way to remove grips. The Mitchell Grip Rip quickly and safely removes grips from steel and graphite shafts. Insert the butt end of the shaft into the device. Pull the shaft back out and the hidden blade “rips” the grip away. Locks in a vise. #GR - Mitchell Grip Rip #GRB - Replacement Blade

Make sure to use the proper liquid for the tape you are using, that is, only use solvent on solventbased tape or use clear glass cleaner on the water-reactivated tape. Use plenty of solvent/ liquid when installing the grip as it will make it easier to install. Allow a minimum of 3 hours (24 hours is safest) before playing a recently installed grip to reduce the risk of the grip coming loose; temperature and the compound the grip is made from can vary drying times. For safety reasons, avoid using highly flammable solvents such a lighter fluid, gasoline and paint thinner (to name a few from). Know and understand proper grip sizing with the various butt diameters and core sized grips – the Modern Guide to Clubmaking is a great reference book.

137

CLUBMAKING TOOLS & SUPPLIES

Tips for clamping a shaft in a vise Care must be taken when clamping shafts, especially ultralight graphite shafts with thin walls. Gradually build up the clamping pressure so the shaft is “snug”. When clamping extremely lightweight shafts, it may be better to clamp close to the tip as tip end is generally thicker and less likely to crack as a result of too much pressure.

Shaft Vises

Pro Tour Vise Grip A heavy duty grip vise with quick lever action clamp. Easy shaft size adjustment. Extruded rubber jaws allows for secure clamping. #1 in tour repair vans. Mounts on vise (not included). #MIT022

Pro Tour Vise Pads Protects shafts & clubheads with this magnetized aluminum vise pads. Features 4” V-Groove rubber jaws. #MIT055

Rubber Vice Clamp Rubber Vice Clamp is used with a vice to protect the shaft and hold the club securely in place during assembly and disassembly procedures. #RAVC

Aluminum Shaft Clamp Five non-marking shaft diameter holes (.335, .350, .370, .400 & .500) Covers the range of shafts offered today. Great for removing or installing ferrules. #MIT023

Shaft Extenders

Aluminum Shaft Extenders (extends 2 clubs) Aluminum shaft extenders are affordable and allpurpose. #ALX - Aluminum Shaft Extender for Graphite Shafts #ALXS - Aluminum Shaft Extender for Steel Shafts

Graphite Shaft Extenders (extends 1 club) Graphite extenders provides exacting fit for most graphite shafts. GSEG lengthens the majority of graphite shafts. GSEGO lengthens thin-walled ultralightweight graphite shafts. #GSEG - Shaft Extender for Graphite Shafts #GSEGO - OS Shaft Extender for Graphite Shafts

Steel Shaft Extenders (extends 2 clubs) Steel shaft extenders provide exacting fit for most steel shafts. #EX580 - Shaft Extender for 0.580 Steel Shafts #EX600 - Shaft Extender for 0.600 Steel Shafts

138

How to install golf shaft extenders 1 Never extend a graphite shaft more than 2” . Any more may cause premature failure due to stress where the extension is made. 2 Always use either graphite or aluminum to extend a graphite shaft. Using steel will create a shear point where the extension is made, causing almost certain shaft failure. 3 Always epoxy the extension in place, do not rely on a pressure fit. 4 Try to abrade the extension piece prior to installation to give the epoxy a better hold. 5 Remember that extending the shaft will increase the club’s swingweight. For the first ½”, it may only increase by 1.5 points because the weight of the extender that goes into the shaft and epoxied in place acts as a counterbalance. Then each additional ½” of extension will increase the swingweight by 3 points.

Model #

Usage

Extends

Outside Diameter

Stem Diameter (Shaft ID)

EX580

Steel

2 clubs

0.580”

0.540”

EX600

Steel

2 clubs

0.600”

0.560”

ALXS

Steel

2 clubs

0.590”

0.560”

GSEG

Graphite

1 club

0.600”

0.490”

GSEGO

Graphite

1 club

0.600”

0.540”

ALX

Graphite

2 clubs

0.585”

0.490”

CLUBMAKING TOOLS & SUPPLIES

The Hyde Knife • Heavy-Duty Utility Knife • 4” Long x 1-1/4” Wide: 7-1/2” Total Length • 14 Gauge Steel Blade With A Riveted Wooden Handle • Use For Many Different Repair Jobs • Cut Off Grips, Clean Shafts, Open Boxes, Etc. #MIT053

Hook Blade Knife • Ergonomically Designed • Heavy Casting For Firm Grip • Magnets Hold Blade When Opening The Knife • Deep Hook Blades Ideal For Cutting Off Grips • Includes 5 Hook Blades #MIT051

Replacement Hook Blades Replacement blades for Hook Blade Knife. 5 Pack. #MIT052

Spiral Deburring Roll & Mandrel Use in drill to clean out hosels afer reshafting or prior to assembly for best bond. #SDRM - Kit of Mandrel & 5 Rolls #SDRR - Five Replacement Rolls

Groove Tool • Aluminum Disk • Triangular Carbide Insert • Lasts A Lifetime • Cleans Grooves • Re-Sharpens Grooves • Maintain Groove Width & Depth Note: Re-sharpening grooves may be deemed non-conforming for tournament play under USGA rules. #MIT017

Sanding Belts

Broken Steel Shaft Extractor Use to remove steel iron shafts broken off at the hosel. Apply heat to break epoxy bond. Thread the Shaft Extractor into broken shaft with a ½” wrench. Slide extracting sleeve over Shaft Extractor and install nut and washer. Use 1/2” wrench to turn nut to back out broken shaft. Use heat resistant gloves to prevent injury. #MIT061

MIT042 MIT043

MIT044 MIT045

Drill Bits #MIT018 - 8.6mm Bit (0.335”) #MIT019 - 9.4mm Bit (0.370”) #MIT020 - 20° Countersink Bit #MIT021 - Deburr Ball

Steel Shaft Sanding Belt

White Cloth Ferrule Belt

Graphite Shaft Sanding Belt

Red Egyptian Ferrule Belt

Model #

Description

Usage

130C

Steel Shaft Sanding Belt

For steel shaft tip abrasion

1” x 30”

MIT050

Graphite Shaft Sanding Belt

For graphite shaft tip abrasion

1” x 30”

MIT057

Red Egyptian Ferrule Dressing Belt

For turning down ferrules

1” x 30”

MIT012

Steel Shaft Sanding Belt

For steel shaft tip abrasion

1” x 42”

MIT015

Graphite Shaft Sanding Belt

For graphite shaft tip abrasion

1” x 42”

MIT013

White Cloth Ferrule Dressing Belt

For turning down ferrules

1” x 42”

MIT014

Red Egyptian Ferrule Dressing Belt

For turning down ferrules

1” x 42”

Hosel Brushes Great for removing old epoxy and debris from inside hosels. Brushes without handle can be attached to drill. #MIT042 - Iron Brush w/o Handle #MIT043 - Wood Brush w/o Handle #MIT044 - Iron Brush w/ Handle #MIT045 - Wood Brush w/Handle

Size

Shaft Cutoff Wheel 6” dia. x 0.35” thick wheel cuts both steel & graphite. ½” arbor hole. #MIT016

Note on Ferrule Belts The White Cloth belt is more aggressive and flexible than the red belt and better suited for the more experienced ferrule turner.

139

CLUBMAKING TOOLS & SUPPLIES

Sold individually

Clublength Ruler Tool Kit The Clublength Ruler Tool Kit is perfect for accurately measuring overall length of woods, irons, and putters. Engineered with a unique sole centering method guaranteeing accurate lengths for all lie angles. This ensures a consistent length progression between clubs in every set. Conforms to USGA method for measuring maximum driver length of 48’’. Kit includes Clublength Rule Sole Plate, 48” Clublength Ruler, Marking Guide, Putter Adapter. #MIT046

Clublength Ruler 48” aluminum ruler with unique graphic layout. Measurements printed on both edges and center. #MIT025 Clublength Ruler Soleplate Attaches to Clublength Ruler to measure clublength without having to set the club in the playing position. #MIT024

Digital Calipers Electronic Digital Calipers makes it easy to accurately read measurements in inches or millimeters for shaft tip and butt diameters, grip sizing, hosel depth and outside diameters. A must for every clubmaking shop! LED readout with battery and protective case included. #MIT047

Gram Weight Scale Digital gram scale is perfect for weighing and sorting components. Also use to weigh epoxy for a perfect mix. Scale measures up to 600 grams (1/10g increments) with an extra large display. #MIT049

MIT-005 MIT-006

Lie Mark Board This lie impact board is used to determine the correct lie for a golfer. It has a special material that leaves a black mark on the club’s sole which can be easily wiped off. Approximately 1/8” x 8” x 16”. #MIT001

Golf Club Specification Forms Use the golf club specification forms to keep an accurate specification record of the golfer you are fitting. 50 sheets per pad. #MIT002

140

Impact Labels

MIT-004

Model #

Description

MIT004

Wood Impact Labels

Quantity per Package 250 labels

MIT006

Iron Impact Labels

250 labels

MIT005

Lie Angle Impact Labels

650 labels

MIT007

Assorted Impact Labels

50 woods / 100 irons / 260 lie angle

Repair Tags Two-part tags are great for identifying customer clubs and avoiding embarrassing mistakes. These numerically sequential organizational tags are sold in a pack of 100. #MIT056

er of Gr

Become a Professional Clubfitter! TOTAL CLUBFITTING IN THE 21ST CENTURY This step-by-step book provides information related to fitting for each and every specification of the golf club. With a heavy emphasis on dynamic fitting, this definitive guide incorporates many approaches to a â&#x20AC;&#x153;best fitâ&#x20AC;? situation. Covers everything you want to know and more about custom fitting, including:

. How the personal interview sets it all up . Understanding the effects of clubhead design parameters . Why length may be the most important fitting consideration . How lie influences ball flight t&

. Face angle and the relationships to ball direction Hi

. Why not only loft but other factors influence ball trajectory . Sorting through the confusing world of shafts . Getting a handle on grip sizing and material types CG dle

LOFT

f Lo . How weight and weight distribution affect ge swingweight era

. Why wedges require special fitting

. Why putter fitting is the most overlooked part of the game L ow L

avity

oft &

High

Total Clubfitting in the 21st Century #TCII 182 pg. Book

Build Clubs Like the Pros! THE MODERN GUIDE TO GOLF CLUBMAKING The Fifth Edition of the Modern Guide to Clubmaking is a book that anyone interesting in building clubs as a hobby to those striving to become a professional clubmaker should not be without. The newest version has been updated to reflect what clubmakers will experience today, not the last century. Plus this is the first ever colorized golf clubmaking book to show in greater detail each process. Not only are there step-by-step instructions for how cut a shaft or install a ferrule, but we show multiple methods. Why? Each shop will have different tools or simply want to do a particular technique by hand or with a motorized piece of equipment they may possess. The book also addresses important issues like shop safety, how to organize and arrange your shop, what type of tools and supplies you may need depending upon the volume of your shop. In addition, there is a through explanation of shaft parameters, clubhead characteristics and a full glossary of terms that apply to the craft of clubmaking. The important background information makes this book unique from other books that have existed that just show the very basics of assembly. From basic assembly of woods, irons, hybrids, putters or wedges, there are also more advanced discussions on topics such as frequency and moment of inertia to common repair procedures such as finishing a through bore, extending a club, bending an iron to re-boring a hosel. In addition to the book, we also offer a DVD that takes you through the assembly of woods, irons and putters. It shows how to trim and measure graphite and steel shafts, size and install grips, swingweight clubs, etc. It is a visual explanation of how to properly assemble a golf club. The 2 hour DVD is perfect for the beginner or for those who wish to brush-up on their assembly skills.

Modern Guide to Golf Clubmaking #MCBII 170 pg. Book #MCDVD 2 Hour DVD

. . . . . .

How to efficiently organize your clubmaking shop How to select tools based on shop size Step-by-step instructions for all types of modern assembly Which method to use - manual or mechanical Hundreds of photos detailing each step of the process Complete discussion on shafts including identification, construction and installation techniques . Comprehensive look at grip installation including custom sizing . How to pre-calculate swingweight before ever putting the club together . Common repairs and more advanced applications such as finishing a through bore, extending a club, bending an iron to re-boring a hosel 141

dsfi

D ynamic

S haft

F itting

I ndex

Why You Can’t Select Shafts by Flex Label Alone FLEX DESIGNATIONS ARE NOT STANDARDIZED IN THE INDUSTRY It’s the hidden truth in the shaft industry... not all shaft flexes are labeled equally. Why? Different vendors produce specs based on different testing methods. In testing approximately 3000 different shafts over the years, we have found that there is great variance in flex designations (L, A, R, S or X flex). It is common to see flex overlap from shaft-to- shaft, manufacturer-to-manufacturer and even within the same manufacturer’s own line of shafts in order to create unique designs. In some cases we have seen L-flex shafts to be as stiff as some extra-stiff shafts!

TRUE APPLES-TO-APPLES COMPARISON WITH DSFI DSFI helps clubmakers and consumers alike select the right shaft based on a standardized testing method. The Dynamic Shaft Fitting Index (DSFI) is the result of an on-going testing project dating back to 1989. It was the first study of its kind to truly compare industry-wide the relative stiffness of one shaft to another using set standardized testing method. The DSFI was conducted to allow clubmakers and consumers to truly compare shafts applesto-apples.

WHAT IS THE SCIENCE BEHIND DSFI? The data is taken, not from the raw uncut shaft, but in its completed assembled form based upon the recommended tip trimming and length the manufacturer intended the shaft to be used. Some of the parameters our R&D department tests for are the frequency (common method of determining stiffness), torque (resistance to twisting) and tip and butt deflection (to show stiffness distribution along the length of the shaft). After each shaft is tested, the data is put into a complex algorithm to put a number on the relative stiffness of each shaft to reflect the bending and twisting the shaft goes through in a swing. The index number is then expanded to form a range to which customers can compare their swing speed (and their swing tempo) to provide a list of possible shaft choices suited to their individual needs.

142

HOW TO USE DSFI

1 Determine your swing speed / distance & tempo category Examine the charts to see which range you best fit into based upon your swing speed and average distance as well as your swing tempo. For example, if your (or your customer’s) driver speed is between 88 and 95 mph or your average distance off the tee is between 220 – 238 yards and have a moderate tempo, look at shafts in Group E. A Note about Tempo Tempo is the transition of the swing from backswing to downswing. Fast tempo means quick or aggressive, slow is long and smooth and moderate is in the middle. If you do not know or unsure, choose moderate.

Use the DSFI chart to determine the range of compatible shafts A lighter weight shafts is typically better for a golfer with a smoother tempo or looking for more distance. A heavier shaft may be better suited to a golfer with a quicker tempo or looking for more accuracy. It may not be uncommon for someone to select a lighter shaft in their range for a driver and a slightly heavier shaft in the fairway woods.

3 Filter out the shafts based on weight and launch angle After you have narrowed your range of shafts for speed/ distance and weight, you can finally sort The Launch Angle column. This provides a relationship of the stiffness distribution of the shaft and is ranked from low to high. For golfers who need added trajectory or for those who may fade or slice, select a shaft in your DSFI range that is listed as high. Low is suited more for golfers who may hook or already hit a high ball. Medium would indicate a medium trajectory or neutral ball flight.

SWING SPEED / DISTANCE & TEMPO CATEGORY Group

Fast Tempo

Moderate Tempo

Slow Tempo

Driver <60mph / <150 yds • #5-iron < 111 yds

Driver 60-67 mph/150-168 yds • #5-iron 111-124 yds

Driver 67-74 mph/168-185 yds • #5-iron 124-137 yds

Driver 60-67 mph/150-168 yds • #5-iron 111-124 yds

Driver 67-74 mph/168-185 yds • #5-iron 124-137 yds

Driver 74-81 mph/185-203 yds • #5-iron 137-150 yds

Driver 67-74 mph/168-185 yds • #5-iron 124-137 yds

Driver 74-81 mph/185-203 yds • #5-iron 137-150 yds

Driver 81-88 mph/203-220 yds • #5-iron 150-163 yds

Driver 74-81 mph/185-203 yds • #5-iron 137-150 yds

Driver 81-88 mph/203-220 yds • #5-iron 150-163 yds

Driver 88-95 mph/220-238 yds • #5-iron 163-176 yds

Driver 81-88 mph/203-220 yds • #5-iron 150-163 yds

Driver 88-95 mph/220-238 yds • #5-iron 163-176 yds

Driver 95-102 mph/238-255 yds • #5-iron 176-188 yds Driver 102-109 mph/255-273 yds • #5-iron 188-201 yds

Driver 88-95 mph/220-238 yds • #5-iron 163-176 yds

Driver 95-102 mph/238-255 yds • #5-iron 176-188 yds

Driver 102-109 mph/255-273 yds • #5-iron 188-201 yds

Driver 109 + mph / 273 + yds • #5-iron 201+ yds

Driver 67-74 mph/168-185 yds • #5-iron 124-137 yds

iron shafts Group

Wood Shafts / Flex

Weight (g)

Launch Angle

Group

Wood Shafts / Flex

Weight (g)

Launch Angle

Group

Wood Shafts / Flex

Weight (g)

Launch Angle

A A A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B B B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C

Acer Velocity L Apollo Shadow UL L Fujikura Sakura L Grafalloy Pro Custom L iBella Bellissima L iBella Obsession L Power Play System Q L SK Fiber V.I.P. LL Apollo Acculite 60 L Apollo Shadow Graphite L Dynacraft Super Collider L Power Play Adrenaline L True Ace Pink Diamond L Powerflex FW114 L Tour Gear Rennaisance L Acer Velocity A Apollo Shadow UL A Fujikura Fit-on E160 R2 Fujikura Sakura Sport L Grafalloy Pro Custom A New Image Berry Image L New Image Emerald Image A New Image Lipstick Red Image L New Image Purple Image L Power Play System Q A Aldila VL L Apollo Balistik Graphite L Apollo Shadow Graphite A Dynacraft Super Collider A Power Play Adrenaline A SK Fiber Tour Trac 80 A Apollo Shadow Steel L True Ace Cadence Blue L Tour Gear Rennaisance A Powerflex FW114 A Acer Velocity R Apollo Shadow UL R Fujikura Fit-on E160 R Grafalloy Pro Custom R Power Play System Q R UST Mamiya Competition Series L Apollo Acculite 60 R Aldila VL A Fujikura Fit-on E270 R2 Apollo Acculite 75 Steel Grafalloy Pro Launch Blue A True Ace Cadence Blue A True Temper GS75 R True Temper GS85 R UST Mamiya iROD Iron R Apollo Acculite 70 R Apollo Shadow Graphite R Apollo Spectre Lite L Dynacraft Super Collider R Power Play Adrenaline R Tour Gear Rennaisance R True Ace Cadence Orange R Apollo Shadow Steel A Powerflex FW114 R True Temper Dynalite 100 L True Temper GS95 R True Temper Multi-Step Lite L Apollo Balistik Steel L

<70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 70-89 70-89 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 <70 70-89 70-89 70-89 90-109 <70 <70 <70 <70 <70 <70 <70 <70 <70 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90-109 90-109 90-109 90-109 90-109 90-109

High High High High High High High High Mid Mid Mid Mid Mid High Mid High High High High High High High High High High Mid Mid Mid Mid Mid Mid High High Mid High High High High High High High Mid Mid Mid High High High High High High Mid Mid Mid Mid Mid Mid Mid High High High High High Mid

C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E

Apollo Standard Stepped L Acer Velocity S Apollo Shadow UL S UST Mamiya Competition Series A Fujikura Fit-on E160 S Power Play System Q S Apollo Acculite 60 S Apollo Balistik Graphite A Fujikura Fit-on E270 R SK Fiber Tour Trac 80 R Apollo Acculite 75 Steel Apollo Acculite 85 Steel R New Image Emerald Image R True Ace Cadence Blue R True Temper GS75 S True Temper GS85 S UST Mamiya iROD Iron S Apollo Acculite 70 S Apollo Acculite 80 R Aldila VX R True Ace Cadence Orange S UST Mamiya Proforce Rv2 75 R True Ace Cadence Red R Powerflex FW114 S True Temper Dynalite 100 A True Temper Multi-Step Lite A Apollo Acculite 95 Steel R Apollo Acculite Gunsmoke R Apollo Phantom Steel R Apollo Spectre Lite A Apollo Standard Stepped A True Temper TT Lite XL L Apollo Hump Steel R Grafalloy Pro Custom S Apollo Balistik Graphite R Fujikura Fit-on E270 S SK Fiber Tour Trac 80 S Apollo Colored Steel R Apollo Standard Stepless R Apollo Standard Stepped R Apollo Acculite 85 Steel S Grafalloy Pro Launch Blue R True Ace Cadence Blue S UST Mamiya Competition Series R Aldila VX S Apollo Acculite 80 S Apollo Shadow Graphite S Dynacraft Super Collider S New Image Emerald Image S Power Play Adrenaline S Powerflex FW501 R Tour Gear Rennaisance S UST Mamiya Proforce Rv2 75 S UST Mamiya Proforce Rv2 95 R Fujikura Fit-on E380 R True Ace Cadence Red S True Temper Dynalite Gold SL R300 True Temper GS95 S Apollo Acculite 95 Steel S Apollo Acculite Gunsmoke S Apollo Balistik Steel A Apollo Phantom Steel S Apollo Spectre Lite R

90-109 <70 <70 <70 <70 <70 <70 <70 <70 <70 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 <70 <70 <70 <70 110+ 110+ 110+ 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90-109 90-109 90-109 90-109 90-109 90-109 90-109

Mid High High High High High Mid Mid Mid Mid High High High High High High High Mid Mid Mid Mid Mid Low High High High Mid Mid Mid Mid Mid Mid Low High Mid Mid Mid Mid Mid Mid High High High High Mid Mid Mid Mid Mid Mid Mid Mid Mid Mid Low Low High High Mid Mid Mid Mid Mid

E E E E E F F F F F F F F F F F F F F F F F F F F F F F F F F F G G G G G G G G G G G G G G G G G G G H H H H H H H H H H H

Project X Rifle 4.0 SK Fiber Tour Trac 100 R True Temper TT Lite XL A Apollo Hump Steel S True Temper Dynamic Gold SL R300 Apollo Balistik Graphite S Grafalloy Pro Launch Blue S Powerflex FW501 S UST Mamiya Competition Series S UST Mamiya Proforce Rv2 95 S Fujikura Fit-on E380 S True Temper Dynalite 100 R True Temper Dynalite Gold SL S300 True Temper Dynalite Gold XP R300 True Temper Multi-Step Lite R Apollo Balistik Steel R Apollo Spectre Lite S Project X Rifle 4.5 Project X Rifle 5.0 Project X Rifle Flighted 4.5 Project X Rifle Flighted 5.0 True Temper TT Lite XL R Apollo Hump Steel X Project X Flighted 5.0 Project X Steel 5.0 SK Fiber Tour Trac 100 S Apollo Shadow Steel R Apollo Colored Steel S Apollo Standard Stepless S Apollo Standard Stepped S True Temper Dynamic Gold R300 TT Dynamic Gold w/Sensicore R300 Fujikura Fit-on E380 X Project X Flighted 6.0 Project X Steel 6.0 True Temper Dynalite 100 S True Temper Dynalite Gold XP S300 True Temper Multi-Step Lite S Project X Flighted 5.5 Project X Steel 5.5 True Temper Dynamic Gold SL S300 Apollo Balistik Steel S Project X Rifle 5.5 Project X Rifle Flighted 5.5 SK Fiber Tour Trac 100 X True Temper TT Lite XL S Apollo Shadow Steel S Project X Rifle 6.0 Project X Rifle Flighted 6.0 True Temper Dynamic Gold S300 TT Dynamic Gold w/Sensicore S300 True Temper Dynamic Gold SL X100 Project X Flighted 6.5 Project X Flighted 7.0 Project X Rifle 6.5 Project X Rifle 7.0 Project X Rifle Flighted 6.5 Project X Rifle Flighted 7.0 Project X Steel 6.5 Project X Steel 7.0 True Temper Dynamic Gold X100 TT Dynamic Gold w/Sensicore X100

90-109 90-109 90-109 90-109 90-109 <70 70-89 70-89 70-89 70-89 70-89 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 110+ 110+ 110+ 110+ 110+ 110+ 70-89 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 90-109 110+ 110+ 110+ 110+ 110+ 90-109 110+ 110+ 110+ 110+ 110+ 110+ 110+ 110+ 110+ 110+

Mid Mid Mid Low Low Low High Mid Mid Mid Low High High High High Mid Mid Mid Mid Mid Mid Mid Low Low Low Low High Mid Mid Mid Low Low Low Low Low High High High Low Low Low Mid Mid Mid Low Mid High Mid Mid Low Low Low Low Low Mid Mid Mid Mid Low Low Low Low

143

wood shafts Group Wood Shafts / Flex

A A A A A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B B B B B B B C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

144

Fujikura Sakura L iBella Bellissima L SK Fiber V.I.P. LL UST Mamiya MP5 L Aldila NV 55 L Aldila NVS 45 L Aldila NVS 55 L Apollo Acculite 45 L Grafalloy Pro Launch Blue 45 L Acer Velocity L Aldila VL L New Image Berry Image L New Image Lipstick Red Image L New Image Purple Image L Power Play System Q L Tour Gear Rennaisance L Powerflex FW114 L Attas T2 4 Series R2 Attas T2 5 Series R2 Fujikura Fit-on E150 R2 iBella Obsession L True Ace Cadence Blue 60 L True Ace Pink Diamond L UST Mamiya Competition Series L UST Mamiya MP5 A UST Mamiya Proforce AC Blue 59 L Apollo Acculite 60 L Apollo Shadow UL L Grafalloy Pro Launch Blue 45 A Acer Velocity A Apollo Balistik Graphite L Grafalloy Pro Custom L New Image Emerald Image A Power Play System Q A Apollo Shadow Graphite L Dynacraft Super Collider L Power Play Adrenaline L Tour Gear Rennaisance A Apollo Spectre Lite L Powerflex FW114 A Aldila Habanero R Attas 5 Series R2 Attas T2 4 Series R Fujikura Fit-on E150 R Grafalloy Pro Launch Platinum Axis A Grafalloy ProLaunch Blue Axis A UST Mamiya Competition Series A UST Mamiya Gold 65 A UST Mamiya Proforce AC Blue 59 A Apollo Acculite 50 R Apollo Acculite 60 R Grafalloy Pro Launch Blue 55 A SK Fiber Helium A UST Mamiya MP5 R Aldila VL A Fujikura Fit-on E160 R2 True Ace Cadence Blue 60 A Apollo Shadow Graphite A Apollo Shadow UL A Dynacraft Super Collider A Fujikura Sakura Sport L Grafalloy Pro Custom A Power Play Adrenaline A Apollo Balistik Graphite A SK Fiber Tour Trac 80 A Apollo Shadow Steel L Powerflex FW114 R Apollo Spectre Lite A True Temper TT Lite XL L Aldila Habanero S Attas 5 Series R Attas T2 5 Series R Fujikura Fit-on E150 S Grafalloy Pro Launch Platinum Axis R Grafalloy ProLaunch Blue Axis R New Image Red Image R SK Fiber Superfly A UST Mamiya Gold 65 R UST Mamiya Proforce AC Blue 59 R Aldila Wasabi R Apollo Acculite 60 S Fujikura Fit-on E250 R Grafalloy Pro Launch Blue 45 R Grafalloy Pro Launch Blue 55 R Project X Graphite 5.0 SK Fiber Helium R SK Fiber Pure Energy R UST Mamiya Competition Series R Alilda Serrano R Fujikura Fit-on E350 R Grafalloy ProLaunch Red Axis R Acer Velocity R Apollo Shadow UL R Fujikura Fit-on E160 R Grafalloy Pro Custom R Power Play System Q R True Ace Cadence Blue 60 R True Ace Green Ghost R

Weight (g)

Launch Angle

<60 <60 <60 <60 <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 70-89 90 + <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 70-89 90 + 90 + <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 70-89 70-89 90 + 90 + 90 + 90 + <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 60-69

High High High High Mid Mid Mid Mid Mid High High High High High High Mid High High High High High High High High High High Mid Mid Mid High High High High High Mid Mid Mid Mid High High High High High High High High High High High Mid Mid Mid Mid Mid High High High Mid Mid Mid Mid Mid Mid Mid Mid High High Mid Mid High High High High High High High High High High Mid Mid Mid Mid Mid Mid Mid Mid Mid Low Low Low High High High High High High High

Group Wood Shafts / Flex

D D D D D D D D D D D D D D D D D D D D D D D E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E F F F F F F F F F F F F F F F F F F F F

UST Mamiya Proforce AC Blue 69 R Aldila DVS 60 R Aldila NVS 65 R Aldila Voodoo 60 R Apollo Shadow Graphite R Dynacraft Super Collider R Power Play Adrenaline R True Ace Cadence Orange 65 R Aldila RIP 60 R Aldila VX R New Image Emerald Image R Aldila Voodoo 75 R Apollo Acculite 70 R Apollo Acculite 80 R SK Fiber Tour Trac 80 R Tour Gear Rennaisance R True Ace Cadence Orange Fairway R Aldila RIP 70 R Apollo Shadow Steel A Powerflex FW114 S Apollo Balistik Steel L Apollo Standard Stepped L True Temper TT Lite XL A Grafalloy ProLaunch Blue Axis S UST Mamiya Gold 65 S UST Mamiya Proforce AC Blue 59 S Aldila Wasabi S Apollo Acculite 50 S Attas 5 Series S Attas T2 5 Series S Grafalloy Pro Launch Blue 45 S Grafalloy Pro Launch Blue 55 S Project X Graphite 5.5 SK Fiber Pure Energy S True Ace Death Stick R UST Mamiya MP5 S Aldila VS Proto 60 R Alilda Serrano S Fujikura Fit-on E350 S Acer Velocity S Attas 6 Series R Fujikura Fit-on E160 S Power Play System Q S True Ace Cadence Blue 60 S True Ace Green Ghost S UST Mamiya PF AC Tour Black 69 R Aldila NV Voodoo 60 R Apollo Shadow UL S Dynacraft Super Collider S Fujikura Fit-on E260 R Fujikura Fit-on E270 R Power Play Adrenaline S True Ace Cadence Orange 65 S True Ace Orange Ion R UST Mamiya Competition Series S UST Mamiya PF AC Tour Green 60 R UST Mamiya Proforce V2 65 R Aldila NV 65 R Fujikura Fit-on E360 R Aldila VX S Aldila NV Voodoo 75 R Aldila NVS 75 R Apollo Acculite 70 S Apollo Acculite 80 S Apollo Balistik Graphite R Apollo Shadow Graphite S New Image Emerald Image S SK Fiber Tour Trac 80 S Tour Gear Rennaisance S True Ace Cadence Orange Fairway S True Ace Cadence Red Fairway R Apollo Shadow Steel R Apollo Balistik Steel A Apollo Spectre Lite R Apollo Standard Stepped A True Temper TT Lite XL R True Temper Dynamic Gold R300 TT Dynamic Gold w/Sensicore R300 Aldila Habanero X Fujikura Fit-on E250 S SK Fiber Superfly R True Ace Death Stick S Fujikura Fit-on E350 X Attas T2 6 Series R Grafalloy Pro Custom S New Image Red Image S UST Mamiya PF AC Tour Black 69 S UST Mamiya Proforce AC Blue 69 S Aldila DVS 60 S Aldila NV Voodoo 60 S Aldila NVS 65 S Aldila Voodoo 60 S Fujikura Fit-on E260 S Grafalloy Pro Launch Blue 65 R Grafalloy Pro Launch Platinum Axis S Project X Graphite 6.0 True Ace Orange Ion R UST Mamiya PF AC Tour Green 60 S

Weight (g)

Launch Angle

60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90 + 90 + 90 + 90 + 90 + <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90 + 90 + 90 + 90 + 90 + 90 + 90 + <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69

High Mid Mid Mid Mid Mid Mid Mid Low High High Mid Mid Mid Mid Mid Mid Low High High Mid Mid Mid High High High Mid Mid Mid Mid Mid Mid Mid Mid Mid Mid Low Low Low High High High High High High High Mid Mid Mid Mid Mid Mid Mid Mid Mid Mid Mid Low Low High Mid Mid Mid Mid Mid Mid Mid Mid Mid Mid Low High Mid Mid Mid Mid Low Low High Mid Mid Mid Low High High High High High Mid Mid Mid Mid Mid Mid Mid Mid Mid Mid

Group Wood Shafts / Flex

F F F F F F F F F F F F F F F F F F F F F F F F F G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G H H H H H H H H H H H H H H H H H H H H H H H H H

Aldila RIP 60 S Aldila VS Proto 70 R Fujikura Fit-on E360 S Grafalloy Pro Launch Red R Grafalloy ProLaunch Red Axis S True Ace Cadence Red 65 R UST Mamiya PF AC Tour Black 79 R Aldila NVS 75 S Attas 7 Series R Attas T2 7 Series R Fujikura Fit-on E270 S UST Mamiya PF AC Tour Green 70 R UST Mamiya Proforce V2 75 R Aldila NV 75 R Aldila VS Proto 80 R Fujikura Fit-on E370 R Fujikura Fit-on E380 R Powerflex FW501 R True Ace Cadence Red Fairway S Apollo Balistik Steel R Apollo Standard Stepless R Apollo Standard Stepped R True Temper TT Lite XL S True Temper Dynamic Gold S300 TT Dynamic Gold w/Sensicore S300 Grafalloy ProLaunch Blue Axis X Aldila Wasabi X Grafalloy Pro Launch Blue 55 X Aldila VS Proto 60 S Alilda Serrano X SK Fiber Superfly S Attas 6 Series S New Image Red Image X UST Mamiya PF AC Tour Black 69 X UST Mamiya Proforce AC Blue 69 X Attas T2 6 Series S Fujikura Fit-on E260 X Grafalloy Pro Launch Blue 65 S Grafalloy Pro Launch Platinum Axis X New Image Gold Image S True Ace Blue Crush R UST Mamiya PF AC Tour Green 60 X UST Mamiya Proforce V2 65 S Aldila NV 65 S Aldila VS Proto 70 S Fujikura Fit-on E360 X Grafalloy Pro Launch Red S Grafalloy ProLaunch Red Axis X Project X Graphite 6.5 True Ace Cadence Red 65 S UST Mamiya PF AC Tour Black 79 S Aldila NV Voodoo 75 S Aldila Voodoo 75 S Attas 7 Series S Attas T2 7 Series S Fujikura Fit-on E270 X SK Fiber Corsair 75 R UST Mamiya PF AC Tour Green 70 S UST Mamiya Proforce V2 75 S Aldila NV 75 S Aldila RIP 70 S Apollo Balistik Graphite S Fujikura Fit-on E370 S Fujikura Fit-on E380 S Powerflex FW501 S Apollo Shadow Steel S Apollo Balistik Steel S Apollo Spectre Lite S Apollo Standard Stepless S Apollo Standard Stepped S True Temper Dynamic Gold X100 TT Dynamic Gold w/Sensicore X100 Aldila Voodoo 60 X Attas 6 Series X Attas T2 6 Series X Grafalloy Pro Launch Blue 65 S New Image Gold Image X True Ace Blue Crush S UST Mamiya Proforce V2 65 X Aldila NV 65 S Aldila RIP 60 X Grafalloy Pro Launch Red X Project X Graphite 7.0 UST Mamiya PF AC Tour Black 79 X Aldila Voodoo 75 X Attas 7 Series X Attas T2 7 Series X UST Mamiya PF AC Tour Green 70 X UST Mamiya Proforce V2 75 X Aldila NV 75 X Aldila RIP 70 X Aldila VS Proto 80 S Fujikura Fit-on E370 X Fujikura Fit-on E380 X SK Fiber Corsair 75 S SK Fiber Rocket 85 S SK Fiber Rocket 85 X

Weight (g)

Launch Angle

60-69 60-69 60-69 60-69 60-69 60-69 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90 + 90 + 90 + 90 + 90 + 90 + <60 <60 <60 <60 <60 <60 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 90 + 90 + 90 + 90 + 90 + 90 + 90 + 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 60-69 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89 70-89

Low Low Low Low Low Low High Mid Mid Mid Mid Mid Mid Low Low Low Low Low Low Mid Mid Mid Mid Low Low High Mid Mid Low Low Low High High High High Mid Mid Mid Mid Mid Mid Mid Mid Low Low Low Low Low Low Low High Mid Mid Mid Mid Mid Mid Mid Mid Low Low Low Low Low Low High Mid Mid Mid Mid Low Low Mid Mid Mid Mid Mid Mid Mid Low Low Low Low High Mid Mid Mid Mid Mid Low Low Low Low Low Low Low Low

44"

43"

Men’s Graphite

Men’s Steel

Ladies Graphite

Ladies Steel

42"

42.5"

43"

#2 203g 43.5"

41.5"

42"

42.5"

#3 208g 43"

41"

41.5"

42"

#4 213g 42.5"

40.5"

41"

41.5"

#5 218g 42"

n/a

13/4"

n/a

11/2"

1/2”

0”

21/4"

11/4"

1/4"

83/4"

1/2"

3/4"

53/4"

23/4"

13/4"

11/4"

1/4"

21/2"

23/4"

3/4"

23/4"

3/4"

11/2"

13/4"

31/2"

21/2"

11/2"

4W 213g

21/2"

11/2"

1/2"

3/4"

11/2"

1/2"

5W 218g

23/4"

13/4"

3/4"

91/4"

0.875"

11/4"

61/4"

31/4"

21/4"

13/4"

3/4"

31/4"

11/4"

31/4"

11/4"

21/4"

41/2"

31/2"

21/2"

6W 223g

40"

40.5"

41"

#6 223g 41.5"

91/2"

11/4"

61/2"

31/2"

21/2"

31/2"

11/2"

31/2"

11/2"

21/2"

7W 228g

39.5"

40"

40.5"

#7 228g 41"

31/2"

10"

11/4"

11/2"

33/4"

23/4"

21/2"

11/2"

31/2"

11/2"

21/2"

51/2"

41/2"

31/2"

9W 233g

39"

39.5"

40"

#9 233g 40.5"

31/2"

10"

11/4"

11/2"

21/2"

11/2"

31/2"

11/2"

21/2"

11W 238g

38.5"

39"

39.5"

#11 238g 40"

1”

0”

11/4"

1/4"

23/4"

1/4"

3/4"

13/4”

1”

11/2"

1/2"

31/4"

Blind Bore approx 0.5” from shaft to ground

1-3/8”

1/2”

1-3/8"

3/8"

51/2"

41/2"

1/2"

2”

3/4"

21/4”

2”

13/4"

3/4"

31/4"

3/4"

21/4”

2”

13/4"

3/4"

71/2"

61/2"

31/4"

3/4"

21/4”

2”

13/4"

3/4"

31/4"

21/4”

2”

13/4"

3/4"

81/2"

71/2"

31/4"

3/4"

31/2"

10"

11/4"

11/2"

41/2"

31/4"

21/2"

11/2"

31/2"

11/2"

21/2"

61/2"

51/2"

41/2"

13W 243g

38"

38.5"

39"

#13 243g 39.5" 40.5" 40"

Ladies Graphite Ladies Steel 39.5"

40"

40.5"

223g 41"

11/2"

1/2"

11/2"

216g

1/4"

71/4"

41/4"

11/4"

3/4"

13/4"

11/2"

1/2"

223g

0”

15-16º

0”

15-17º

0”

15-17º

21/2"

11/2"

1/2"

71/2"

41/2"

11/2"

1/2"

11/2"

3/4"

1/2"

21/2"

3i 243g

38"

38.5"

39"

#3 243g 39.5"

1/4"

11/4"

81/4"

51/4"

21/4"

0.125"

13/4"

3/4"

1/2"

23/4"

1/4"

31/2"

21/2"

11/2"

4i 250g

37.5"

38"

38.5"

#4 250g 39"

11/2"

1/2"

11/2"

11/4"

81/2"

51/2"

21/2"

1/4"

1/2"

5i 257g

37"

37.5"

38"

#5 257g 38.5"

3/4"

13/4"

11/2"

83/4"

53/4"

23/4"

0.375"

21/4"

11/4"

11/2"

31/4"

3/4"

41/2"

31/2"

21/2"

6i 264g

36.5"

37"

37.5"

#6 264g 38"

36"

21/2"

13/4"

1/2"

21/2"

11/2"

31/2"

7i 271g

36.5"

37"

#7 271g 37.5"

1/2”

17-18º

0”

18-20º

1/2”

18-20º

1/2"

1”

19-20º

1/2”

21-23º

1”

21-23º

31/2"

21/2"

11/2"

11/2”

21-23º

1”

24-27º

11/2”

24-27º

11/2"

2”

24-26º

11/2”

28º+

2”

28º+

41/2"

31/2"

21/2"

23/4"

13/4"

21/2"

33/4"

11/4"

51/2"

41/2"

31/2"

8i 278g

35"

35.5"

36"

#9 285g 36.5"

11/4"

21/4"

91/4"

61/4"

31/4"

0.625"

35.5"

36"

36.5"

#8 278g 37"

31/2"

61/2"

51/2"

41/2"

31/2"

11/2"

21/2"

91/2"

61/2"

31/2"

3/4"

1/2"

11/2"

9i 285g

34.5"

35"

35.5"

291+g 36"

wedges

4"/41/2”

61/2"

51/2"

41/2"

31/2"

13/4"

23/4"

93/4"

63/4"

33/4"

13/4"

291+g

wedges

33"

34"

putter

4 Do not tip trim more than 3” off the tip (applies to Select New Image woods and junior composite woods only!) 5 For the Acer Leggera driver take 1” less off the tip than suggested

21/2"

51/2"

41/2"

31/2"

Do not tip trim, butt trim to the desired length

3/4"

73/4"

43/4"

13/4"

11/4"

1/2"

1/4"

21/4"

21/2"

11/2"

1/2"

2i 236g

38.5"

39"

39.5"

#2 236g 40"

2 For non-bore through iron heads, trim 1” additionally from the tip. Applies to True Temper’s TT Lite R&S iron shaft only. 3 For fairway woods, tip trim 1” (Applies for many Aldila woods only!)

39"

39.5"

40"

#1 229g 40.5"

1i 229g

irons & hybrids

41"

216g 41.5"

Men’s Steel

Men’s Graphite

IRONS/HYBRIDS

Special Trim Notes 1 For M1 metal woods add 1 1/2” tip trimming, for M2 metal woods add 1” tip trimming, for blind bore add 1/2” tip trimming, for through bore do not add to tip trimming. (Applies only to those shafts which have a Trim Note 1 next to the letter code)

21/4”

2”

13/4"

3/4"

31/4"

3/4"

31/2"

10"

11/4"

11/2"

31/2"

21/2"

11/2"

31/2"

11/2"

21/2"

15W 248g

37.5"

38"

38.5"

#15 248g 39"

Hybrids Special Note For tip trimming and length on all hybrids (except those with trim codes WW, XX and YY), use the clubhead weight to determine the proper tip trimming and length. Not all hybrids will weigh the same, thus special attention must be made for this category.

11/2”

13/4"

3/4"

61/2"

51/2"

31/4"

3/4"

Do not tip trim, butt trim to the desired playing length.

81/2"

1/4"

1/2"

51/2"

21/2"

11/2"

21/2"

1/2"

21/2"

1/2"

11/2"

3W 208g

M2 Bore approx 1” from shaft to ground

0”

n/a

M1 Bore approx 1.5” from shaft to ground

41/2"

31/2"

21/2"

81/4"

n/a

1/4"

21/4"

51/4"

3/4"

11/4"

1/2"

11/2"

1/4"

21/4"

1/4"

21/4"

1/2"

1/4"

21/2"

11/4"

11/2"

1/2"

2W 203g

1W 198g

woods

TRIMMING INSTRUCTIONS

WOODS

Driver 198g 45"

otaath Chart

CONTACTO & VENTAS

Teléfono

[ + 34 ] 902 934 440 [ + 34 ] 916 573 617 Fax

[ + 34 ] 902 931 397 www.golfestudio.com info@golfestudio.com

GOLF ESTUDIO C / Valgrande 20 28108 Alcobendas Madrid, España