3. The center shaft has a 1/4″ allan wrench slot beneath the garbage disposal unit. Use a 1/4″ allan wrench and work the shaft to turn the grinding wheel counter clockwise and clockwise to dislodge anything that may be stuck in the disposer. 4. If you have the ability to run water without it backing up, turn the water on to help loosen the grinding wheel and flush out the debris as you use the 1/4″ allan wrench. 5. Once you have determined the garbage disposer is no longer jammed, restore power and press the reset button located beneath the disposal. 6. Activate the garbage disposal and run water. If the disposer makes no unusual sounds, spins freely and does not trip the circuit, congratulations. You have cleared the jammed disposer. 7.
If the disposer is working but the sink does not drain, you will need to cable the kitchen sink drain line.