AMPG ArchComp-SexBolts

Page 1

Sex Bolts & Mating Fasteners Accurate Manufactured Products Group

Tamperproof Sex Bolts 6 Lobe with Pin Security Sex Bolts—The Complete System A solution that replaces the traditional partition sex bolts, with superior drive characteristics, and a wider range of sizes. (See chart on facing page for available sizes and order numbers) • Male screws available with or without shoulders. • All parts are matched for a finished appearance. • Both female and male bolts feature the 6-Lobe with Pin Security Drive. • 6-Lobe drive has many advantages— No cam out during installation No head distortion during driving, No special tooling required for both installation and removal. • Head dimensions for both male and female parts are matched, per IFI standards. HEAD DIAMETER

HEAD HEIGHT

BARREL LENGTH THREAD DEPTH

BARREL DIAMETER

STANDARD 1/4 TRUSS HEAD TAMPER RESISTANT 6-LOBE T27 DRIVE GO GAGE PENETRATION: .070 MIN.

See chart on facing page for available sizes and order numbers

THREAD SIZE

Truss Head 6 Lobe with Pin Security Screws 18-8 Stainless Steel • Male screws available with or without shoulders. •6-Lobe drive has many advantages— No cam out during installation No head distortion during driving, No special tooling required for both installation and removal. HEAD DIAMETER

HEAD HEIGHT

LENGTH

Truss Head 6 Lobe with Pin SHOULDER Security Screws 18-8 Stainless Steel

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

HEAD DIAMETER

SHOULDER LENGTH HEAD HEIGHT

THREAD LENGTH

STANDARD 1/4 TRUSS HEAD TAMPER RESISTANT 6-LOBE T27 DRIVE GO GAGE PENETRATION: .070 MIN.

AA2

A2 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Tamperproof Sex Bolts

Accur Manu Produ Group

IMPORT &

Female Truss Head Sex Bolts — 6 Lobe with Pin Security Drive Female Sex Bolts and Male Tamperproof Truss Head Screws are sold separately

6 Lobe Tamperproof Security—Female Barrels Barrel Diameter

1/4

18-8 ST/ST

Barrel Length 3/8” 1/2 5/8 3/4 1 1-1/4 1-1/2

Thread Size 10-24 10-24 10-24 10-24 10-24 10-24 10-24

Thread Depth 1/4” 1/4 1/4 3/8 3/8 3/8 3/8

Head Diameter 7/16” 7/16 7/16 7/16 7/16 7/16 7/16

Head Height 7/64” 7/64 7/64 7/64 7/64 7/64 7/64

Drive Size T 20 T 20 T 20 T 20 T 20 T 20 T 20

Order Number Z4406T6S Z4408T6S Z4410T6S Z4412T6S Z4416T6S Z4420T6S Z4424T6S

1/2 3/4 1 1-1/4 1-1/2

1/4-20 1/4-20 1/4-20 1/4-20 1/4-20

1/4 3/8 3/8 3/8 3/8

9/16 9/16 9/16 9/16 9/16

9/64 9/64 9/64 9/64 9/64

T 27 T 27 T 27 T 27 T 27

Z4443T6S Z4444T6S Z4446T6S Z4448T6S Z4449T6S

5/16

Lobewith with Pin STAINLESS 66Lobe Pin 18-818-8 STAINLESS Truss Head Security Screws STEEL 6Truss LobeHead Hex Security Key 6 Lobe with Pin Bit Screws STEEL Head Head Head Head Order Size Diameter Height Height Size Diameter Drive Number 10-24 7/16” 7/64” 10-24XX1/4” 1/4” 7/16” 7/64” T 20 10-24 X 1/2 7/16 7/64 10-24 X 1/2KEYT20 7/16 7/64 T 27 XX11 KEYT27 10-24 7/16 7/64 10-24 7/16 7/64

OrderOrder Hex DriveDrive Number SizeNumberSize T 20T 20 Z4580SS Z4580SS T 20Z4582SS1/4” T 20T 20 Z4582SS T 27Z4588SS1/4” T 20T 20 Z4588SS

1/4-20 X 1/4 1/4-20 X 1/4 1/4-20 X 3/8 1/4-20 X 3/8 1/4-20 X 1/2

T 27 T 27 Z4591SS Z4591SS T 27 Z4590SS T 27 Z4592SS Z4590SS T 27

1/4-20 X 1/2

9/16 9/16 9/16 9/16 9/16

9/16

9/64 9/64 9/64 9/64 9/64

9/64

T 27

Order Number BITT20 BITT27

Z4592SS

6 Lobe with Pin 6 Lobe with PinSHOULDER Truss Head Security Screws WITH Size 10-24 X 1/4” Size 10-24 X 1/4 10-24 X 1/4” 10-24 X 3/8 10-24 X 1/4 10-24 X 5/8 10-24XX7/8 3/8 10-24

10-24 X 5/8

10-24 XX1/4 7/8 1/4-20 1/4-20 X 3/8 1/4-20 1/4-20XX3/8 1/4 1/4-20 1/4-20XX5/8 3/8 1/4-20 1/4-20XX7/8 3/8 1/4-20 X 5/8 1/4-20 X 7/8

Truss Head Screws Thread WITH SHOULDER Shoulder TotalSecurity Length Shoulder Head Head

18-8 STAINLESS 18-8 STAINLESS STEEL

STEEL Order Diameter Under Head Length Length DiameterHead Height Head Drive Number Order Shoulder Total Length Shoulder Thread Lobe Tamperproof Security—FemaleBarrels Barrels 18-8ST/ST ST/ST Security—Female 18-8 1/4” 66 Lobe 3/8” Tamperproof 7/64” Height T20 Z4581SS Diameter Under Head 1/8”Length 1/4” Length 7/16”Diameter Drive Number Barrel Barrel 1/4 Thread Thread 1/4 Thread Head Head Drive Order 1/4 1/2 Barrel 7/16 7/64 T20 Z4583SS Barrel Thread Head Head Drive Order 1/4” 3/8” 1/8” 1/4” 7/16” 7/64” T20 Z4581SS Diameter Length1/4 Size Size Depth Diameter Diameter Height Size Number 1/4 Diameter 5/8 Length 3/8 7/16 7/64 T20 Z4584SS Depth Height Size Number 1/4 1/2 3/8” 1/4 1/4 7/16 7/64” 7/64 T20 Z4583SS 10-24 5/81/4” 1/4” 7/16” T2020 Z4406T6S 1/4 7/8 7/16 7/64 Z4585SS 3/8” 1/4 10-24 7/16” 7/64” TT20 Z4406T6S 1/4 3/8 7/16 7/64 T20 1/2 1/4 10-24 10-24 7/8 1/4 1/4 7/16 7/167/64 7/64 T2020 Z4408T6SZ4584SS 7/16 TT20 Z4408T6S 1/41/4 1-1/85/8 1/2 7/64 Z4586SS 1/4

1/4 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

7/8 5/8 5/8

3/4 1/41/21-1/83/4 1/4 1

1/4 1 1/2 1/8 1-1/4 1-1/4 5/8 1/2 1-1/2 1/4 1-1/2 7/8 1/2 1/4 1-1/85/8 1/2 1/2 1/4

3/4 5/16 7/8 3/4 5/161-1/8 11 5/16 5/16

Tamperproof Security Tools

1-1/4 1-1/4 1-1/2 1-1/2

66 Lobe LobeHex HexKey Key Drive Drive TT20 20 TT27 27

Accurate Manufactured Products Group

Order Order Number Number KEYT20 KEYT20 KEYT27 KEYT27

1/4 10-24 10-24 10-24 10-24 1/4 10-24 10-24 10-24 10-24 1/4 10-24 10-24

5/8 1/4 1/4

3/8 7/8 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/4 3/8 5/8 3/8 1/8 1/4 3/8 1/4-20 7/8 1/4 1/4 1/4-20 1/4-20 1/4-20 1/4 1/4-20 1/4-20 1/4 1/4-20 1/4-20 1/4-20 1/4-20

3/8 3/8 5/8 3/8 3/8 7/8 3/8 3/8 3/8 3/8

7/167/64 7/64 7/64 7/167/64 9/64

7/64 TT2020 T2020 TT27 7/64

9/64 9/167/64 7/64 7/64 9/16 9/64 9/64 9/169/64 9/64 9/16 9/169/64 9/64 9/16 9/16 9/169/64 9/64 9/16

T 20 T27 9/64 TT2020 T27 9/64 9/64 T2727 TT27 TT2727 9/64 TT2727 9/64

7/16 7/16

7/16 7/16 9/16 7/16 7/16 9/16 7/16 7/16 9/16 7/16 7/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16

7/64 7/64 9/64 7/64

9/64 9/64 9/64 9/64

T2020 TT27 T 20

TT2727 TT2727

T20 Z4410T6SZ4585SS Z4410T6S Z4412T6SZ4586SS Z4412T6S T20 Z4593SS Z4416T6S Z4416T6S Z4597SS Z4420T6S Z4420T6S Z4594SS T27 Z4593SS Z4424T6S Z4424T6S Z4595SS Z4597SS T27

Z4596SS T27 Z4443T6SZ4594SS Z4443T6S Z4444T6SZ4595SS Z4444T6S T27 Z4446T6SZ4596SS Z4446T6S T27 Z4448T6S Z4448T6S Z4449T6S Z4449T6S

66Lobe Lobewith withPin PinBit Bit Size Size TT20 20 TT27 27

Hex Hex Size Size 1/4” 1/4” 1/4” 1/4”

Order Order Number Number BITT20 BITT20 BITT27 BITT27

A3 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA3


Sex Bolts & Mating Fasteners

Tamperproof Sex Bolts

Accurate Manufactured Products Group

ALL-NEW EXTRA LARGE Tamperproof Sex Bolts A solution for playground equipment, exercise equipment, detention centers, hospitals, or any other public spaces that need security hardware. • Male screws available with or without shoulders. • All parts are matched for a finished appearance. • Both female and male bolts feature the 6-Lobe with Pin Security Drive. • 6-Lobe drive has many advantages— No cam out during installation No head distortion during driving, No special tooling required for both installation and removal. • Head dimensions for both male and female parts are matched, per IFI standards.

See chart on facing page for available sizes and order numbers

EXTRA LARGE 6 Lobe Tamperproof—Female Barrels

Drive Size T40 T40 T40 T40 T40

Order Number Z4900T6S Z4901T6S Z4902T6S Z4903T6S Z4904T6S

5/16” Order 5/16 Number 5/16 Z4900T6S 5/16 Z4901T6S 5/16 Z4902T6S

T40 T40 T40 T40 T40

Z4906T6S Z4907T6S Z4908T6S Z4909T6S Z4910T6S

5/8-11 7/8 5/161/4 1-1/8” 3/8” T40 Z4904T6S 3/4 5/8-11 7/16 —18-8 Stainless 1-1/8 Steel 3/8 EXTRA LARGE SHOULDER Security Screws 1/2 1/2-13 1 5/16 5/8-11 1” T40 Z4906T6S 3/45/16” 1-1/8 3/8 3/4 LENGTH 1/2-13 1-1/2 7/16 5/8-11 1 T40 Z4907T6S SHOULDER 3/45/16 1-1/8 3/8 1 1/2-13THREAD2 5/8 5/8-11 1 T40 Z4908T6S 3/45/16 1-1/8 3/8 LENGTH HEAD

T45 T45 T45 T45 T45

Z4912T6S Z4913T6S Z4914T6S Z4915T6S Z4916T6S

T45 T45 T45 T45 T45

Z4918T6S Z4919T6S Z4920T6S Z4921T6S Z4922T6S

Barrel Diameter

Barrel Thread Thread Head Length Size Depth Diameter 1/2" 3/8-16 5/16" 7/8” ALL-NEW EXTRA LARGE Security Screws Steel 7/8 3/4 3/8-16—18-8 Stainless 7/16 5/8 7/8 Female Sex Bolts and Male Tamperproof1Truss Head 3/8-16 Screws are sold separately 1-1/2 3/8-16 5/8 7/8 LENGTH 2 3/8-16 5/8 7/8 HEAD HEAD HEIGHT

1/2

DIAMETER LARGE 6 Lobe Tamperproof—Female Barrels EXTRA

Barrel Diameter

1/2 ALL-NEW

5/8

HEAD DIAMETER

18-8 ST/ST

Barrel Length 1/2" 3/4 1 1-1/2 2

Thread 1/2 Thread Size 3/4 Depth 3/8-16 1 5/16" 3/8-16 1-1/2 7/16 3/8-16 2 5/8

5/8

3/8-16 3/8-16 1/2

5/8 5/8

1/2-13 1/2-13

5/8 5/8

1/2-13Head 1/2-13 Diameter 1/2-13 7/8” 1/2-13 7/8 1/2-13 7/8 7/8

Head Height 1/4” 1/4 1/4 1/4 1/4

18-8 ST/ST

5/16Head 7/16 Height 5/8 1/4” 5/8 1/4 5/8 1/4

1” Drive 1Size 1T40 1T40 1T40

1/4

T40

Z4903T6S

T40 T40

Z4909T6S Z4910T6S

T45

Z4912T6S 1/2 Z4913T6S 1/2 Z4914T6S 1/2 Z4915T6S Z4916T6S

3/4

HEIGHT 1-1/2 2

1/2 3/4 STANDARD 1/4 TRUSS HEAD 1 TAMPER RESISTANT 6-LOBE T27 DRIVE GO GAGE PENETRATION: .070 MIN. 1-1/2 2

7/8

3/4

1/2 3/4

5/8-11 5/16 5/8-11 1 7/16 5/8-11 1-1/2 3/4 5/8-11 2 3/4 5/8-11 3/4

1 1

3/4-10 3/4-10 1-1/8” 3/4-101-1/8 3/4-101-1/8 3/4-101-1/8 1-1/8

5/16 5/16

5/16 7/16 3/8” 3/4 3/8 3/4 3/8 3/4 3/8 3/8

1-1/4" 1-1/4 T45 1-1/4 T45 1-1/4 T45 1-1/4 T45

1/2” 1/2

Tamperproof1/2Security Tools for5/16 Extra Large Sex 3/4-10 1-1/4"Tamperproof 1/2” T45BoltsZ4918T6S

7/8 SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

AA4

3/4 1 1-1/2 2

6

3/4-10 7/16 3/4-10 3/4 Lobe Hex Key 3/4 3/4-10 3/4-10 Order 3/4

Drive T40 T45

6 Lobe Hex Key Drive T40 T45

Order Number KEYT40 KEYT45

1-1/4 1-1/4 1-1/4 1-1/4

1/2 1/2 1/2 1/2

Number KEYT40 KEYT45

T45 T45 6 Lobe T45 T45

Size T40 T45

Z4919T6S Z4920T6S with Pin Z4921T6S Z4922T6S Hex

Size 1/4" 1/4"

Bit Order Number BITT40 BITT45

6 Lobe with Pin Bit Size T40 T45

Hex Size 1/4" 1/4"

A4 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Order Number BITT40 BITT45

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Tamperproof Sex Bolts

Accur Manu Produ Group

IMPORT &

ALL-NEW EXTRA LARGE Truss Head Sex Bolts — 6 Lobe with Pin Security Drive Female Sex Bolts and Male Tamperproof Truss Head Screws are sold separately

EXTRA LARGE 6 Lobe Tamperproof—Female Barrels

18-8 ST/ST

Barrel Length 1/2" 3/4 1 1-1/2 2

Thread Size 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16

Thread Depth 5/16" 7/16 5/8 5/8 5/8

Head Diameter 7/8” 7/8 7/8 7/8 7/8

Head Height 1/4” 1/4 1/4 1/4 1/4

Drive Size T40 T40 T40 T40 T40

Order Number Z4900T6S Z4901T6S Z4902T6S Z4903T6S Z4904T6S

5/8

1/2 3/4 1 1-1/2 2

1/2-13 1/2-13 1/2-13 1/2-13 1/2-13

5/16 7/16 5/8 5/8 5/8

1” 1 1 1 1

5/16” 5/16 5/16 5/16 5/16

T40 T40 T40 T40 T40

Z4906T6S Z4907T6S Z4908T6S Z4909T6S Z4910T6S

3/4

1/2 3/4 1 1-1/2 2

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

5/16 7/16 3/4 3/4 3/4

1-1/8” 1-1/8 1-1/8 1-1/8 1-1/8

3/8” 3/8 3/8 3/8 3/8

T45 T45 T45 T45 T45

Z4912T6S Z4913T6S Z4914T6S Z4915T6S Z4916T6S

7/8

1/2 3/4 1 1-1/2 2

3/4-10 3/4-10 3/4-10 3/4-10 3/4-10

5/16 7/16 3/4 3/4 3/4

1-1/4" 1-1/4 1-1/4 1-1/4 1-1/4

1/2” 1/2 1/2 1/2 1/2

T45 T45 T45 T45 T45

Z4918T6S Z4919T6S Z4920T6S Z4921T6S Z4922T6S

Barrel Diameter

1/2

EXTRA LARGE 6 Lobe with Pin EXTRA LARGE 6 Lobe with Pin Truss Head Security Screws Truss Head Security Screws Head Head

Size Diameter 6 Lobe Size Hex Key Diameter

3/8-16 x 3/4" 7/8" 3/8-16xx1-1/2 3/4" Order7/8" 3/8-16 7/8 3/8-16 Drive x 1-1/2 Number7/8 1/2-13 T40 x 3/4KEYT401 1/2-13 3/4KEYT4511 1/2-13 T45 xx1-1/2 1/2-13 x 1-1/2 1 5/8-11 x 3/4 1-1/8 5/8-11xx1-1/2 3/4 1-1/8 5/8-11 1-1/8 5/8-11 x 1-1/2 1-1/8 3/4-10 x 3/4 1-1/4 3/4-10xx1-1/2 3/4 1-1/4 3/4-10 1-1/4 3/4-10 x 1-1/2 1-1/4

Size Size 3/8-16 x 3/4" 3/8-16xx1-1/2 3/4" 3/8-16 3/8-16 x 1-1/2 1/2-13 x 3/4 1/2-13 1/2-13xx1-1/2 3/4 1/2-13 x 1-1/2 5/8-11 x 3/4 5/8-11 5/8-11xx1-1/2 3/4 5/8-11 x 1-1/2 3/4-10 x 3/4 3/4-10 3/4-10xx1-1/2 3/4 3/4-10 x 1-1/2

Head Head Height Height 1/4" 1/4" 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2

18-8 STAINLESS 18-8 STAINLESS STEEL STEEL Drive Drive T40 T40 T40 T40 T40 T40 T40 T40 T45 T45 T45 T45 T45 T45 T45 T45

Order Order Number 6 Lobe Number Z4925SS Z4925SS Z4926SS Z4926SS Size Z4928SS T40 Z4928SS Z4929SS T45 Z4929SS Z4931SS Z4931SS Z4932SS Z4932SS Z4934SS Z4934SS Z4935SS Z4935SS

with Pin Bit Hex Size 1/4" 1/4"

EXTRA LARGE 6 Lobe with Pin EXTRA LARGE 6 Lobe withSHOULDER Pin Truss Head Security Screws WITH Truss Head Security Screws WITH SHOULDER Shoulder Total Length Shoulder Thread Head Shoulder Under Total Length Diameter Head Shoulder Length Diameter Under 1/2" 1" Head Length 1/4" 1/2" 1" 1/4" 1/2 1-3/4 1/4 1/2 1-3/4 1/4 5/8 1 1/4 5/8 1-3/4 1/4 5/8 1 1/4 5/8 1-3/4 1/4 3/4 1 1/4 3/4 1-3/4 1/4 3/4 1 1/4 3/4 1-3/4 1/4 7/8 1 1/4 7/8 1-3/4 1/4 7/8 1 1/4 7/8 1-3/4 1/4

Accurate Manufactured Products Group

Thread Length Length 3/4" 3/4" 1-1/2 1-1/2 3/4 1-1/2 3/4 1-1/2 3/4 1-1/2 3/4 1-1/2 3/4 1-1/2 3/4 1-1/2

Head Diameter Diameter 7/8" 7/8" 7/8 7/8 1 11 1 1-1/8 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-1/4

Order Number BITT40 BITT45

Head Head Height Height 1/4" 1/4" 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2

18-8 STAINLESS 18-8STEEL STAINLESS STEEL Order Drive Drive T40 T40 T40 T40 T40 T40 T40 T40 T45 T45 T45 T45 T45 T45 T45 T45

Order Number Number Z4938SS Z4938SS Z4940SS Z4940SS Z4945SS Z4947SS Z4945SS Z4947SS Z4950SS Z4952SS Z4950SS Z4952SS Z4955SS Z4957SS Z4955SS Z4957SS

A5 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA5


Sex Bolts & Mating Fasteners

Drive Barrel ButtonSocket Head Socket Drive Bolts Barrel Bolts

Accurate Manufactured Products Group

Button Head Socket Drive Barrel Bolts — Female 18-8 Stainless Steel

A line of contemporary barrel bolts that have a button head with a hex drive. The smooth domed appearance of the head lends a sleek finished look to all products and installations. Our standard size range is from 1/4" diameter x 3/8" length up to 7/8" diameter x 3" length. Manufactured in the USA from durable and corrosion-resistant Type 303 Stainless Steel, these parts are fully machined for a more precise part. Used in industrial, construction, marine, and transportation, they rpovide excellent strength and versatility. Used in furniture and commercial applications, they present a beautiful modern look and finished appearance.

See chart on facing page for available sizes and order numbers

BARREL LENGTH THREAD SIZE

HEAD HEIGHT

HEAD DIAMETER

THREAD DEPTH BARREL DIAMETER

Specials in any size are available with a quick turn-around from our factory.

THESE SEX BOLTS ARE ALL MADE IN

USA

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

AA6

A6 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

One Way Head Bath Partition Sex Bolts

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Button Head Socket Drive Button Head Socket Drive—Female Barrels

Accur Manu Produ Group

18-8 Stainless Steel

Barrel Length 3/8” 1/2 3/4 1 1-1/4

Thread Size 10-24 10-24 10-24 10-24 10-24

Thread Depth 3/16” 5/16 3/8 3/8 3/8

Head Diameter 7/16” 7/16 7/16 7/16 7/16

Head Height 1/8” 1/8 1/8 1/8 1/8

Hex Key Size 5/32" 5/32 5/32 5/32 5/32

Order Number Z1600 Z1602 Z1604 Z1606 Z1608

3/8

1/2 3/4 1

1/4-20 1/4-20 1/4-20

3/8 3/8 3/8

21/32 21/32 21/32

3/16 3/16 3/16

7/32 7/32 7/32

Z1616 Z1618 Z1620

1/2

1/2 5/8 3/4 7/8 1 1-1/2 1-3/4 2 2-1/2 3

3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

Z1630 Z1631 Z1632 Z1633 Z1634 Z1710 Z1712 Z1714 Z1716 Z1718

5/8

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13

5/16 7/16 5/8 5/8 5/8 5/8 5/8 5/8

1" 1" 1" 1" 1" 1" 1" 1"

5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Z1720 Z1722 Z1724 Z1726 Z1728 Z1800 Z1802 Z1804

3/4

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

5/16 7/16 3/4 3/4 3/4 3/4 3/4 3/4

1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Z1806 Z1808 Z1810 Z1812 Z1814 Z1816 Z1818 Z1820

7/8

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

5/16 7/16 3/4 3/4 3/4 3/4 3/4 3/4

1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Z1822 Z1824 Z1826 Z1828 Z1830 Z1832 Z1834 Z1836

Barrel Diameter 1/4

Button Head Socket Drive—Male Mating Screws

18-8 Stainless Steel

Shoulder Length Shoulder Diameter Under Head Length 1/4" NONE 1/2 1/4 1/4 1 1/2

Thread Size 10-24 10-24 10-24

Thread Length 1/4" 1/4 1/2

Head Diameter 7/16” 7/16 7/16

Head Height 1/8” 1/8 1/8

Hex Key Size 5/32" 5/32 5/32

Order Number Z1838 Z1768 Z1769

3/8

3/8 3/4 1

NONE 1/4 1/2

1/4-20 1/4-20 1/4-20

3/8 1/2 1/2

21/32 21/32 21/32

3/16 3/16 3/16

7/32 7/32 7/32

Z1840 Z1624 Z1770

1/2

1/2" 1 1-1/2 2

NONE 1/2 1 1-1/2

3/8-16 3/8-16 3/8-16 3/8-16

1/2" 1/2 1/2 1/2

7/8 7/8 7/8 7/8

1/4 1/4 1/4 1/4

5/16 5/16 5/16 5/16

Z1842 Z1772 Z1774 Z1776

5/8

1/2" 1 1-1/2 2

NONE 1/2 1 1-1/2

1/2-13 1/2-13 1/2-13 1/2-13

1/2" 1/2 1/2 1/2

1" 1" 1" 1"

5/16 5/16 5/16 5/16

3/8 3/8 3/8 3/8

Z1844 Z1778 Z1780 Z1782

3/4

1/2" 1 1-1/2 2

NONE 1/2 1 1-1/2

5/8-11 5/8-11 5/8-11 5/8-11

1/2" 1/2 1/2 1/2

1-1/8 1-1/8 1-1/8 1-1/8

3/8 3/8 3/8 3/8

3/8 3/8 3/8 3/8

Z1846 Z1784 Z1786 Z1788

7/8

1/2" 1 1-1/2 2

NONE 1/2 1 1-1/2

5/8-11 5/8-11 5/8-11 5/8-11

1/2" 1/2 1/2 1/2

1-1/4 1-1/4 1-1/4 1-1/4

3/8 3/8 3/8 3/8

3/8 3/8 3/8 3/8

Z1848 Z1790 Z1792 Z1794

Accurate Manufactured Products Group

NE EXPANW DED LI LARG NE— ER S NOW IZES AVAIL ABLE

THESE SEX BOLTS ARE ALL MADE IN

USA

A7 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA7


Sex Bolts & Mating Fasteners Accurate Manufactured Products Group

82° Flat Head Socket Drive Barrel Bolts 82 Degree Flat Head Socket Drive Barrel Bolts — Female 18-8 Stainless Steel Our 82° Flat Head Barrel Bolts are designed for use with countersunk holes, which allow the fasteners to sit flush with the surface, providing a clean and finished appearance. Made in the USA from Type 303 Stainless Steel which offers and excellent combination of strength and corrosion resistance. Our standard size range is from 1/4" diameter x 3/8" length up to 7/8" diameter x 3" length. Specials are available in any size, call or email for a quote. OVERALL LENGTH THREAD SIZE

HEAD DIAMETER

HEAD HEIGHT THREAD DEPTH

BARREL DIAMETER

82°

THESE SEX BOLTS ARE ALL MADE IN

USA

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

AA8

A8 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

82° Flat Head Socket Drive 82° Flat Head Socket Drive—Female Barrels

Accur Manu Produ Group

18-8 Stainless Steel

Overall Length 3/8” 1/2 3/4 1 1-1/4

Thread Size 10-24 10-24 10-24 10-24 10-24

Thread Depth 3/16* 5/16* 3/8 3/8 3/8

Head Diameter 33/64” 33/64 33/64 33/64 33/64

Head Height 11/64” 11/64 11/64 11/64 11/64

Hex Key Size 5/32" 5/32 5/32 5/32 5/32

Order Number Z1640 Z1642 Z1644 Z1646 Z1648

3/8

1/2 3/4 1

1/4-20 1/4-20 1/4-20

3/16* 3/8 3/8

3/4 3/4 3/4

15/64 15/64 15/64

7/32 7/32 7/32

Z1650 Z1652 Z1654

1/2

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16

3/16* 3/8 1/2 1/2 1/2 1/2 1/2 1/2

7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

Z1660 Z1662 Z1664 Z1665 Z1667 Z1669 Z1670 Z1671

5/8

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13

1/4* 3/8 5/8 3/4 3/4 3/4 3/4 3/4

1" 1" 1" 1" 1" 1" 1" 1"

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Z1672 Z1674 Z1676 Z1678 Z1680 Z1682 Z1683 Z1684

3/4

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

1/4* 3/8 5/8 3/4 3/4 3/4 3/4 3/4

1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Z1686 Z1688 Z1690 Z1692 Z1694 Z1696 Z1698 Z1699

7/8

1/2 3/4 1 1-1/2 1-3/4 2 2-1/2 3

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

1/4* 3/8 5/8 3/4 3/4 3/4 3/4 3/4

1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Z1700 Z1701 Z1702 Z1703 Z1704 Z1705 Z1706 Z1707

Barrel Diameter 1/4

* Open Head

THESE SEX BOLTS ARE ALL MADE IN

USA

NE EXPANW DED LI LARG NE— ER SI NO ZES AVAIL W ABLE

Flat Head Socket Drive—Male Mating Screws 18-8 Stainless Steel Overall Length 3/8" 5/8 1

Thread Length 5/32" 25/64 49/64

Head Diameter 33/64" 33/64 33/64

Head Height 11/64" 11/64 11/64

Hex Key Size 5/32" 5/32 5/32

Order Number Z1730 Z1732 Z1734

1/4-20

3/4

7/16

3/4

15/64

7/32

Z1736

3/8-16

3/4 1-1/4 1-3/4

3/8 7/8 1

7/8 7/8 7/8

1/4 1/4 1/4

5/16 5/16 5/16

Z1738 Z1740 Z1742

1/2-13

3/4 1-1/4 1-3/4

3/8 7/8 1

1" 1" 1"

1/4 1/4 1/4

3/8 3/8 3/8

Z1744 Z1746 Z1748

5/8-11

3/4 1-1/4 1-3/4 3/4 1-1/4 1-3/4

3/8 7/8 1 3/8 7/8 1

1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4

1/4 1/4 1/4 1/4 1/4 1/4

3/8 3/8 3/8 1/2 1/2 1/2

Z1750 Z1752 Z1754 Z1756 Z1758 Z1760

Thread Size 10-24

Accurate Manufactured Products Group

A9 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA9


Sex Bolts & Mating Fasteners Accurate Manufactured Products Group

Low Profile Head Socket Drive Bolts Low Profile Head Socket Drive Bolts Type 316 Stainless Steel This line of matched head mating fasteners was developed for an Architect who required specific holding parameters in a low profile head that would blend into the project design. The heads of these low-profile barrel bolts are ideal in applications where material to be fastened is too thin to countersink; not allowing the use of countersunk screws. The large diameter heads of the low-profile barrel bolts were engineered to spread the load across a wide surface to provide greater holding power in thinner material applications. When looking for a mating fastener that can be more concealed than button and flat head style fasteners, low-profile head socket drive barrel bolts offer a sleek, unobtrusive and polished finish for any design. SHOULDER LENGTH

HEAD HEIGHT

HEAD DIA

SHOULDER DIA

HEX DRIVE SIZE THREAD SIZE

THREAD DEPTH

THREAD LENGTH

HEAD HEIGHT HEAD DIA SHOULDER LENGTH

SHOULDER DIA

THREAD SIZE

THREAD LENGTH

HEX DRIVE SIZE

THESE SEX BOLTS ARE ALL MADE IN

USA

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

A10

AA10

Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Low Profile Head Socket Drive Bolts Low-Profile Head Socket Drive—Female Barrels

Type 316 SS

Barrel Length 3/8” 1/2 3/4 1 1-1/4

Thread Size 10-24 10-24 10-24 10-24 10-24

Thread Depth 3/16” 5/16 3/8 3/8 3/8

Head Diameter 9/16” 9/16 9/16 9/16 9/16

Head Height 3/32" 3/32 3/32 3/32 3/32

Hex Key Size 5/32" 5/32 5/32 5/32 5/32

Order Number Z1508 Z1510 Z1512 Z1514 Z1516

3/8"

1/2* 3/4 1

1/4-20 1/4-20 1/4-20

3/8* 3/8 3/8

25/32 25/32 25/32

3/32 3/32 3/32

7/32 7/32 7/32

Z1518 Z1520 Z1522

1/2"

1/2* 3/4 1 1-1/2 1-3/4 2 2-1/2 3

3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16

3/8* 3/8 3/8 3/8 3/8 3/8 3/8 3/8

1 1 1 1 1 1 1 1

3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

Z1524 Z1526 Z1528 Z1530 Z1532 Z1534 Z1536 Z1538

5/8"

3/4 1 1-1/2 1-3/4 2 2-1/2 3

1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13

7/16 5/8 5/8 5/8 5/8 5/8 5/8

1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8

1/8 1/8 1/8 1/8 1/8 1/8 1/8

3/8 3/8 3/8 3/8 3/8 3/8 3/8

Z1542 Z1544 Z1546 Z1548 Z1550 Z1552 Z1554

3/4"

3/4 1 1-1/2 1-3/4 2 2-1/2 3

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

7/16 3/4 3/4 3/4 3/4 3/4 3/4

1-3/8 1-3/8 1-3/8 1-3/8 1-3/8 1-3/8 1-3/8

1/8 1/8 1/8 1/8 1/8 1/8 1/8

3/8 3/8 3/8 3/8 3/8 3/8 3/8

Z1558 Z1560 Z1562 Z1564 Z1566 Z1568 Z1570

7/8"

3/4 1 1-1/2 1-3/4 2 2-1/2 3

5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

7/16 3/4 3/4 3/4 3/4 3/4 3/4

1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2

1/8 1/8 1/8 1/8 1/8 1/8 1/8

1/2 1/2 1/2 1/2 1/2 1/2 1/2

Z1574 Z1576 Z1578 Z1580 Z1582 Z1584 Z1586

Barrel Diameter

1/4"

Low-Profile Head Socket Drive—Male Mating Screws

Type 316 SS

Shoulder Length Shoulder Diameter Under Head Length 1/4" NONE 1/2 1/4 1/4" 1 1/2

Thread Size 10-24 10-24 10-24

Thread Length 1/4" 1/4 1/2

Head Diameter 9/16” 9/16 9/16

Head Height 3/32" 3/32 3/32

Hex Key Size 5/32" 5/32 5/32

Order Number Z1900 Z1902 Z1904

3/8"

3/8 3/4 1

NONE 1/4 1/2

1/4-20 1/4-20 1/4-20

3/8 1/2 1/2

25/32 25/32 25/32

3/32 3/32 3/32

7/32 7/32 7/32

Z1906 Z1908 Z1910

1/2"

1/2 1 1-1/2 2

NONE 1/2 1 1-1/2

3/8-16 3/8-16 3/8-16 3/8-16

1/2 1/2 1/2 1/2

1 1 1 1

3/32 3/32 3/32 3/32

1/4 1/4 1/4 1/4

Z1912 Z1914 Z1916 Z1918

5/8"

1/2 1 1-1/2 2

NONE 1/2 1 1-1/2

1/2-13 1/2-13 1/2-13 1/2-13

1/2 1/2 1/2 1/2

1-1/8 1-1/8 1-1/8 1-1/8

1/8 1/8 1/8 1/8

3/8 3/8 3/8 3/8

Z1920 Z1922 Z1924 Z1926

3/4"

1/2 1 1-1/2 2

NONE 1/2 1 1-1/2

5/8-11 5/8-11 5/8-11 5/8-11

1/2 1/2 1/2 1/2

1-3/8 1-3/8 1-3/8 1-3/8

1/8 1/8 1/8 1/8

3/8 3/8 3/8 3/8

Z1928 Z1930 Z1932 Z1934

7/8"

1/2 1 1-1/2 2

NONE 1/2 1 1-1/2

5/8-11 5/8-11 5/8-11 5/8-11

1/2 1/2 1/2 1/2

1-1/2 1-1/2 1-1/2 1-1/2

1/8 1/8 1/8 1/8

3/8 3/8 3/8 3/8

Z1936 Z1938 Z1940 Z1942

Accurate Manufactured Products Group

Accur Manu Produ Group

THESE SEX BOLTS ARE ALL MADE IN

USA

A11 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA11


Sex Bolts & Mating Fasteners Accurate Manufactured Products Group

Architectural Series Sex Bolts

Set

Female Bolt Only

When joining two pieces of material together, Sex Bolts provide a versatile and stable fastener. The domed side is used in security applications, as there is no way to turn the smooth head of the Sex Bolt. A hole drilled thru the 2 materials being fastened is a safe and convenient method of joining. Our large selection of head styles, sizes, and materials makes for a custom look at an in-stock price and delivery. This example shows a bulletproof glass installation at a bank. The sex bolts present a beautiful and finished look with a strong mechanical joint. The all metal joint protects the glass.

See chart on facing page for available sizes and order numbers

Marine applications are a common use for our 18-8 and Type 316 Stainless Steel Sex Bolts. Docks and construction projects in both fresh and salt water areas use these. Many boat manufacturers use these for attaching accessories both above and below the water line. Sex Bolts are particularly useful in fiberglass marine applications, as they take much of the stress away from the fiberglass.

STANCHION BASE BOAT DECK

BOAT HULL

BOAT HULL

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

A12

AA12

Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Architectural Series Sex Bolts Architectural Series Sex Bolts D Barrel Diameter

3/8

B Barrel Length 1-3/16" 1-7/8 1-9/16 1-9/16 1-9/16

C Thread Depth 3/4" 3/4 1 1 1

A Head Diameter 9/16" 9/16 9/16 9/16 9/16

F Head Height 5/32" 5/32 5/32 5/32 5/32

E Thread Size 1/4-20 1/4-20 1/4-20 1/4-20 1/4-20

Architectural Series Sex Bolts D Barrel Diameter

18-8 STAINLESS STEEL

10-32 10-32 10-32 10-32

None None None None

10-32 x 1 10-32 x 1 10-32 x 1 10-32 x 1

Z5025 Z5125 Z5126 Z5127

Z5025-1 Z5125-1 Z5126-1 Z5127-1

1/8 1/8 1/8

12-24 12-24 12-24

None None None

12-24 x 1 12-24 x 1 12-24 x 1

Z5128 Z5129 Z5130

Z5128-1 Z5129-1 Z5130-1

9/16” 9/16 9/16 9/16 9/16 9/16 9/16

5/32” 5/32 5/32 5/32 5/32 5/32 5/32

1/4-20 1/4-20 1/4-20 1/4-20 1/4-20 1/4-20 1/4-20

None None None None None None None

1/4-20 x 1 1/4-20 x 7/8 1/4-20 x 1 1/4-20 x 1 1/4-20 x 1 1/4-20 x 1-1/2 1/4-20 x 1-1/2

Z5140 Z5221 Z5142 Z5225 Z5325 Z5326 Z5327

Z5220-1 Z5221-1 Z5222 Z5225-1 Z5325-1 Z5326-1 Z5327-1

3/4 3/4 3/4 3/4

3/16 3/16 3/16 3/16

5/16-18 3/8-16 5/16-18 5/16-18

None None None None

5/16-18 x 1 3/8-16 x 1 5/16-18 x 1-1/2 5/16-18 x 1-1/2

Z5234 Z5235 Z5425 Z5426

Z5234-1 Z5235-1 Z5425-1 Z5426-1

E Thread Size 8-32 8-32 8-32 8-32

1-3/16 1-9/16 2 3

3/4 3/4 3/4 3/4

1/2 1/2 1/2 1/2

1/8 1/8 1/8 1/8

1-3/16 1-9/16 2-1/16

3/4 3/4 3/4

1/2 1/2 1/2

3/8

3/4” 1 1-3/16 1-9/16 2-1/16 3 4

1/2” 5/8 3/4 3/4 3/4 3/4 3/4

1/2

1-9/16 1-3/4 2-1/16 3

3/4 3/4 3/4 3/4

Architectural Series Sex Bolts

316 STAINLESS STEEL Plating None None None None

Mating Screw 8-32 x 3/4" 8-32 x 3/4 8-32 x 3/4 8-32 x 3/4

Set Order Number Z5180 Z5181 Z5182 Z5183

Female Bolt Only Z4877 Z4885 Z4893 Z4894

10-32 10-32 10-32 10-32

None None None None

10-32 x 1 10-32 x 1 10-32 x 1 10-32 x 1

Z5190 Z5191 Z5192 Z5193

Z5024 Z5124 Z5131 Z5132

5/32 5/32 5/32 5/32 5/32 5/32

1/4-20 1/4-20 1/4-20 1/4-20 1/4-20 1/4-20

None None None None None None

1/4-20 x 1/2 1/4-20 x 1/2 1/4-20 x 1-1/2 1/4-20 x 1-1/2 1/4-20 x 1-1/2 1/4-20 x 1-1/2

Z5194 Z5195 Z5196 Z5197 Z5198 Z5199

Z5219 Z5223 Z5224 Z5197-1 Z5198-1 Z5199-1

3/4 3/4

3/16 3/16

5/16-18 5/16-18

None None

5/16-18 x 1 5/16-18 x 1

Z5206 Z5207

Z5206-1 Z5207-1

1

1/4

1/2-13

None

1/2-13 x 1

Z5209-1

B Barrel Length 1-3/16" 1-9/16 2 3

C Thread Depth 5/8" 5/8 5/8 5/8

A Head Diameter 1/2" 1/2 1/2 1/2

F Head Height 1/8" 1/8 1/8 1/8

E Thread Size 8-32 8-32 8-32 8-32

5/16

1-3/16 1-9/16 2 3

3/4 3/4 3/4 3/4

1/2 1/2 1/2 1/2

1/8 1/8 1/8 1/8

3/8

3/4 1 1-3/16 1-9/16 2-1/16 3

1/2 5/8 3/4 3/4 3/4 3/4

9/16 9/16 9/16 9/16 9/16 9/16

1/2

2-1/16 3

3/4 3/4

5/8

3

1

Architectural Series Sex Bolts D Barrel Diameter

B Barrel Length

C Thread Depth

A Head Diameter

F Head Height

E Thread Size

3/8

1-9/16 1-11/16

1 3/4

9/16 9/16

1/8 1/8

1/4-20 1/4-20

Accurate Manufactured Products Group

Female Bolt Only Z5214 Z5201 Z5215-1E Z5216-1E Z5217-1E

Plating None None None None

F Head Height 1/8" 1/8 1/8 1/8

1/4

Set Order Number — — Z5215 Z5216 Z5217

Female Bolt Only Z4876-1 Z4886-1 Z4889-1 Z4890-1

A Head Diameter 1/2" 1/2 1/2 1/2

D Barrel Diameter

Plating None Zinc Zinc Chrome Brass

Mating Screw None None 1/4-20 x 1" 1/4-20 x 1-1/2 1/4-20 x 1-1/2

Set Order Number Z4876 Z4886 Z4889 Z4890

C Thread Depth 5/8" 5/8 5/8 5/8

5/16

STEEL MATERIAL

Mating Screw 8-32 x 7/8" 8-32 x 7/8 8-32 x 7/8 8-32 x 7/8

B Barrel Length 1-3/16" 1-9/16 2 3

1/4

Accur Manu Produ Group

THESE SEX BOLTS ARE ALL MADE IN

USA *Mating Screws are Phillips Flat Head Machine Screws, 18-8 Stainless Steel

New Items in Red

Mating Screws are Phillips Flat Head Machine Screws, Type 316 Stainless Steel

ALUMINUM MATERIAL Plating

Mating Screw

Set Order Number

Female Bolt Only

None None

1/4-20 x 1 1/4-20 x 3/4

Z5218 Z5250

Z5218-1A Z5250-1

A13 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA13


Sex Bolts & Mating Fasteners Accurate Manufactured Products Group

Socket Head Cap Screws

LOW HEAD Socket Head Cap Screws AMPG® Precision Machined Socket Cap Screws are dimensionally more precise. Each screw is manufactured in one operation. We begin with precision-ground DFARS compliant raw materials, which is ordered with full traceability. On state of the art CNC Swiss Lathes, parts are made without any extra-handling or other machining operations. This ensures concentricity, tight tolerances, and a fastener easily recognized for uniformity & function. Perfect for tight areas, low heads are about half the height of standard socket heads. All have a Class 3A thread fit. Screw length is measured from under the head. Note: Low head screws are not recommended for higher strength applications. HEAD HEIGHT

THREAD SIZE

HEAD DIAMETER

THREAD LENGTH HEX SIZE

LOW HEAD Socket Head Cap Screws Length 1/4 3/8 1/2 3/4

Head Diameter 0.226" 0.226" 0.226" 0.226"

Head Height 0.072" 0.072" 0.072" 0.072"

Hex Size 1/16" 1/16" 1/16" 1/16"

Type 316 SS Order Number ZL60206C04 ZL60206C06 ZL60206C08 ZL60206C12

17-4 PH Order Number ZL74406C04 ZL74406C06 ZL74406C08 ZL74406C12

8-32

1/4 3/8 1/2 3/4

0.270" 0.270" 0.270" 0.270"

0.085" 0.085" 0.085" 0.085"

5/64" 5/64" 5/64" 5/64"

ZL60208C04 ZL60208C06 ZL60208C08 ZL60208C12

ZL74408C04 ZL74408C06 ZL74408C08 ZL74408C12

ZL72008C04 ZL72008C06 ZL72008C08 ZL72008C12

ZL70508C04 ZL70508C06 ZL70508C08 ZL70508C12

10-32

3/8 1/2 3/4 1

0.312" 0.312" 0.312" 0.312"

0.098" 0.098" 0.098" 0.098"

3/32" 3/32" 3/32" 3/32"

ZL60210F06 ZL60210F08 ZL60210F12 ZL60210F16

ZL74410F06 ZL74410F08 ZL74410F12 ZL74410F16

ZL72010F06 ZL72010F08 ZL72010F12 ZL72010F16

ZL70510F06 ZL70510F08 ZL70510F12 ZL70510F16

1/4-20

3/8 1/2 3/4 1

0.375" 0.375" 0.375" 0.375"

0.127" 0.127" 0.127" 0.127"

1/8" 1/8" 1/8" 1/8"

ZL60214C06 ZL60214C08 ZL60214C12 ZL60214C16

ZL74414C06 ZL74414C08 ZL74414C12 ZL74414C16

ZL72014C06 ZL72014C08 ZL72014C12 ZL72014C16

ZL70514C06 ZL70514C08 ZL70514C12 ZL70514C16

5/16-18

1/2 3/4 1 1 1/4 1 1/2

0.437" 0.437" 0.437" 0.437" 0.437"

0.158" 0.158" 0.158" 0.158" 0.158"

5/32" 5/32" 5/32" 5/32" 5/32"

ZL60251C08 ZL60251C12 ZL60251C16 ZL60251C20 ZL60251C24

ZL74451C08 ZL74451C12 ZL74451C16 ZL74451C20 ZL74451C24

ZL72051C08 ZL72051C12 ZL72051C16 ZL72051C20 ZL72051C24

ZL70551C08 ZL70551C12 ZL70551C16 ZL70551C20 ZL70551C24

3/8-16

1/2 3/4 1 1 1/2 2

0.562" 0.562" 0.562" 0.562" 0.562"

0.192" 0.192" 0.192" 0.192" 0.192"

3/16" 3/16" 3/16" 3/16" 3/16"

ZL60238C08 ZL60238C12 ZL60238C16 ZL60238C24 ZL60238C32

ZL74438C08 ZL74438C12 ZL74438C16 ZL74438C24 ZL74438C32

ZL72038C08 ZL72038C12 ZL72038C16 ZL72038C24 ZL72038C32

ZL70538C08 ZL70538C12 ZL70538C16 ZL70538C24 ZL70538C32

1/2"-13

1/2 3/4 1 1-1/2 2

0.750" 0.750 0.750 0.750 0.750

0.254" 0.254 0.254 0.254 0.254

1/4" 1/4 1/4 1/4 1/4

ZL60212C08 ZL60212C12 ZL60212C16 ZL60212C24 ZL60212C32

— — — — —

— — — — —

— — — — —

Thread

6-32

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

THESE SCREWS ARE ALL MADE IN

USA

A14

AA14

Aluminum Titanium Order Number Order Number ZL72006C04 ZL70506C04 ZL72006C06 ZL70506C06 ZL72006C08 ZL70506C08 ZL72006C12 ZL70506C12

Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Socket Head Cap Screws

Accur Manu Produ Group

ULTRA LOW HEAD Socket Head Cap Screws Excellent for tight areas and fastening applications which will not accept a countersunk flat head screw. Ultra Low Head screws have reduced head heights about 1/3 less than the height of standard low head socket cap screws. A lower profile head reduces the chance of anything snagging on the head. In addition, all screw sizes are made with extra-wide heads that offer 33% more bearing surface and holding power than standard low head screws. The larger diameter head improves holding power especially when fastening lower strength materials. Made of corrosion-resistant Type 316 stainless steel. Material is DFARS compliant and traceable. Screws have a Class 2A thread fit. Length is measured from under the shoulder. The recommended installation hole size is equivalent to the shoulder diameter and assures the shoulder length sets below the surface when fastened. Low head screws are not recommended for high strength applications. SHOULDER LENGTH

HEAD HEIGHT

THREAD SIZE

HEAD DIAMETER

THREAD LENGTH HEX SIZE

Ultra Low Head Socket Head Cap Screws—Type 316 SS Thread Length 3/8" 1/2 3/4 1

Shoulder Length 1/16" 1/16 1/16 1/16

Shoulder Diameter 1/4" 1/4 1/4 1/4

Head Diameter 13/32" 13/32 13/32 13/32

Head Height 1/16" 1/16 1/16 1/16

Hex Size 3/32" 3/32 3/32 3/32

Order Number ZUL60210F06 ZUL60210F08 ZUL60210F12 ZUL60210F16

1/4-20

3/8" 1/2 3/4 1 1-1/4 1-1/2

5/64" 5/64 5/64 5/64 5/64 5/64

5/16" 5/16 5/16 5/16 5/16 5/16

1/2" 1/2 1/2 1/2 1/2 1/2

5/64" 5/64 5/64 5/64 5/64 5/64

1/8" 1/8 1/8 1/8 1/8 1/8

ZUL60214C06 ZUL60214C08 ZUL60214C12 ZUL60214C16 ZUL60214C20 ZUL60214C24

5/16-18

1/2" 3/4 1 1-1/4 1-1/2

7/64" 7/64 7/64 7/64 7/64

3/8" 3/8 3/8 3/8 3/8

37/64" 37/64 37/64 37/64 37/64

7/64" 7/64 7/64 7/64 7/64

5/32" 5/32 5/32 5/32 5/32

ZUL60251C08 ZUL60251C12 ZUL60251C16 ZUL60251C20 ZUL60251C24

3/8-16

1/2" 3/4 1 1-1/2 2

1/8" 1/8 1/8 1/8 1/8

7/16" 7/16 7/16 7/16 7/16

3/4" 3/4 3/4 3/4 3/4

1/8" 1/8 1/8 1/8 1/8

3/16" 3/16 3/16 3/16 3/16

ZUL60238C08 ZUL60238C12 ZUL60238C16 ZUL60238C24 ZUL60238C32

1/2-13

1/2" 3/4 1 1-1/2 2

11/64" 11/64 11/64 11/64 11/64

9/16" 9/16 9/16 9/16 9/16

1" 1 1 1 1

11/64" 11/64 11/64 11/64 11/64

1/4" 1/4 1/4 1/4 1/4

ZUL60212C08 ZUL60212C12 ZUL60212C16 ZUL60212C24 ZUL60212C32

Thread Size 10-32

THESE SCREWS ARE ALL MADE IN

USA

Accurate Manufactured Products Group

A15 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA15


Sex Bolts & Mating Fasteners Accurate Manufactured Products Group

Socket Head Cap Screws Socket Head Cap Screws—EXOTIC MATERIAL AMPG® Precision Machined Socket Head Cap Screws are dimensionally more precise. Each screw is manufactured in one operation. We begin with precision-ground DFARS compliant raw materials, which is ordered with full traceability. On state of the art CNC Swiss Lathes, parts are made without any extra-handling or other machining operations. This ensures concentricity, tight tolerances, and products easily recognized for their uniformity & function. Socket head cap screws have heavy heads with a hex socket drive. All screws have a Class 3A thread fit. Screw length is measured from top of head.

Socket Head Cap Screws—EXOTICS Length 1/8 3/16 1/4 5/16 3/8 1/2

Head Diameter 0.140" 0.140" 0.140" 0.140" 0.140" 0.140"

Head Height 0.086" 0.086" 0.086" 0.086" 0.086" 0.086"

Hex Key Size 5/64" 5/64" 5/64" 5/64" 5/64" 5/64"

17-4 PH Order Number ZS74402C02 ZS74402C03 ZS74402C04 ZS74402C05 ZS74402C06 ZS74402C08

Aluminum Order Number

ZS72002C08

Titanium Order Number ZS70502C02 ZS70502C03 ZS70502C04 ZS70502C05 ZS70502C06 ZS70502C08

4-40

3/16 1/4 5/16 3/8 1/2 5/8 3/4

0.183" 0.183" 0.183" 0.183" 0.183" 0.183" 0.183"

0.112" 0.112" 0.112" 0.112" 0.112" 0.112" 0.112"

3/32" 3/32" 3/32" 3/32" 3/32" 3/32" 3/32"

ZS74404C03 ZS74404C04 ZS74404C05 ZS74404C06 ZS74404C08 ZS74404C10 ZS74404C12

ZS72004C03 ZS72004C04 ZS72004C05 ZS72004C06 ZS72004C08 ZS72004C10 ZS72004C12

ZS70504C03 ZS70504C04 ZS70504C05 ZS70504C06 ZS70504C08 ZS70504C10 ZS70504C12

0.226" 0.226" 0.226" 0.226" 0.226" 0.226" 0.226"

0.138" 0.138" 0.138" 0.138" 0.138" 0.138" 0.138"

7/64" 7/64" 7/64" 7/64" 7/64" 7/64" 7/64"

ZS74406C04 ZS74406C05 ZS74406C06 ZS74406C08 ZS74406C10 ZS74406C12 ZS74406C16

ZS72006C04

6-32

1/4 5/16 3/8 1/2 5/8 3/4 1

ZS72006C10 ZS72006C12 ZS72006C16

ZS72006C08

ZS70506C04 ZS70506C05 ZS70506C06 ZS70506C08 ZS70506C10 ZS70506C12 ZS70506C16

8-32

1/4 3/8 1/2 5/8 3/4 1 1 1/4

0.270" 0.270" 0.270" 0.270" 0.270" 0.270" 0.270"

0.164" 0.164" 0.164" 0.164" 0.164" 0.164" 0.164"

9/64" 9/64" 9/64" 9/64" 9/64" 9/64" 9/64"

ZS74408C04 ZS74408C06 ZS74408C08 ZS74408C10 ZS74408C12 ZS74408C16 ZS74408C20

ZS72008C04 ZS72008C06 ZS72008C08 ZS72008C10 ZS72008C12 ZS72008C16 ZS72008C20

ZS70508C04 ZS70508C06 ZS70508C08 ZS70508C10 ZS70508C12 ZS70508C16 ZS70508C20

10-32

1/4 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2

0.312" 0.312" 0.312" 0.312" 0.312" 0.312" 0.312" 0.312"

0.190" 0.190" 0.190" 0.190" 0.190" 0.190" 0.190" 0.190"

5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32"

ZS74410F04 ZS74410F06 ZS74410F08 ZS74410F10 ZS74410F12 ZS74410F16 ZS74410F20 ZS74410F24

ZS72010F04 ZS72010F06 ZS72010F08 ZS72010F10 ZS72010F12 ZS72010F16 ZS72010F20 ZS72010F24

ZS70510F04 ZS70510F06 ZS70510F08 ZS70510F10 ZS70510F12 ZS70510F16 ZS70510F20 ZS70510F24

1/4-20

3/8 1/2 5/8 3/4 1 1 1/4 1 1/2

3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16"

ZS74414C06 ZS74414C08 ZS74414C10 ZS74414C12 ZS74414C16 ZS74414C20 ZS74414C24

ZS72014C06 ZS72014C08 ZS72014C10 ZS72014C12 ZS72014C16 ZS72014C20 ZS72014C24

ZS70514C06 ZS70514C08 ZS70514C10 ZS70514C12 ZS70514C16 ZS70514C20 ZS70514C24

5/16-18

1/2 5/8 3/4 7/8 1 1 1/4 1 1/2 2

15/32' 15/32' 15/32' 15/32' 15/32' 15/32' 15/32' 15/32'

5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16"

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

ZS74451C08 ZS74451C10 ZS74451C12 ZS74451C14 ZS74451C16 ZS74451C20 ZS74451C24 ZS74451C32

ZS72031C08 ZS72031C10 ZS72031C12 ZS72031C14 ZS72031C16 ZS72031C20 ZS72031C24 ZS72031C32

ZS70551C08 ZS70551C10 ZS70551C12 ZS70551C14 ZS70551C16 ZS70551C20 ZS70551C24 ZS70551C32

3/8-16

3/4 7/8 1 1 1/4 1 1/2

9/16" 9/16" 9/16" 9/16" 9/16"

3/8" 3/8" 3/8" 3/8" 3/8"

5/16" 5/16" 5/16" 5/16" 5/16"

ZS74438C12 ZS74438C14 ZS74438C16 ZS74438C20 ZS74438C24

ZS72038C12 ZS72038C14 ZS72038C16 ZS72038C20 ZS72038C24

ZS70538C12 ZS70538C14 ZS70538C16 ZS70538C20 ZS70538C24

1/2-13

1 1 1/4 1 1/2 2 3

3/4" 3/4" 3/4" 3/4" 3/4"

1/2" 1/2" 1/2" 1/2" 1/2"

3/8" 3/8" 3/8" 3/8" 3/8"

ZS74412C16 ZS74412C20 ZS74412C24 ZS74412C32 ZS74412C48

ZS72012C16 ZS72012C20 ZS72012C24 ZS72012C32 ZS72012C48

ZS70512C16 ZS70512C20 ZS70512C24 ZS70512C32 ZS70512C48

Thread

2-56

SPECIAL ORDERS AVAILABLE— Small Quantities to Large Volume

ZS72002C02 ZS72002C03 ZS72002C04

ZS72002C05 ZS72002C06

ZS72006C05 ZS72006C06

A16

AA16

Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

Accurate Manufactured Products Group


Sex Bolts & Mating Fasteners

Socket Head Cap Screws

Accur Manu Produ Group

100° FLAT HEAD Socket Cap Screws Screws are beveled 100° which provides a larger bearing surface to distribute holding force, these screws perform better than standard 82° flat head screws especially in softer materials. Designed for light fastening jobs where you need a flush surface and corrosion resistance. All screws have a Class 3A thread fit, a Rockwell hardness of B70, and minimum tensile strength of 70,000 psi. Screw length is measured from the top of the head. Note: Flat head screws are not recommended for high strength applications.

OVERALL LENGTH

HEAD HEIGHT

HEAD DIAMETER

100°

THREAD SIZE

HEX SIZE

100 Degree Flat Head Socket Cap Screws Thread Size

Type 316 SS

Overall Length 3/8" 1/2 3/4

Head Diameter 0.307" 0.307 0.307

Head Height 0.056" 0.056 0.056

Hex Key Size 5/64" 5/64 5/64

Head Angle 100° 100° 100°

Part Number ZHF60206C06 ZHF60206C08 ZHF60206C12

8-32

3/8" 1/2 3/4

0.359" 0.359 0.359

0.066" 0.066 0.066

5/64" 5/64 5/64

100° 100° 100°

ZHF60208C06 ZHF60208C08 ZHF60208C12

10-32

1/2" 3/4 1

0.411" 0.411 0.411

0.074" 0.074 0.074

3/32" 3/32 3/32

100° 100° 100°

ZHF60210F08 ZHF60210F12 ZHF60210F16

1/4"-20

1/2" 3/4 1 1-1/4 1-1/2

0.531" 0.531 0.531 0.531 0.531

0.095" 0.095 0.095 0.095 0.095

1/8" 1/8 1/8 1/8 1/8

100° 100° 100° 100° 100°

ZHF60214C08 ZHF60214C12 ZHF60214C16 ZHF60214C20 ZHF60214C24

5/16"-18

3/4 1 1-1/2

0.656" 0.656 0.656

0.117" 0.117 0.117

5/32" 5/32 5/32

100° 100° 100°

ZHF60251C12 ZHF60251C16 ZHF60251C24

6-32

Accurate Manufactured Products Group

A17 Phone: 317-472-9000 • FAX: 317-472-9010 • email: sales@ampg.com • www.ampg.com/arch

AA17


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.