Name
Date
Completion ����������������������� 1. The most common type of light frame construction is ___ framing. ����������������������� 2. A(n) ___ partition is located near the center of a building to support heavy loads. ����������������������� 3. Anchor bolts secure the ___ to the foundation. ����������������������� 4. Wood-framed walls and partitions are made with a(n) ___ plate as the bottom member. ����������������������� 5. A(n) ___ roof is the most common roof type. ����������������������� 6. Floor and roof trusses are prefabricated ___ commonly used in a platform framed building. ����������������������� 7. A(n) ___ is a structural unit used in floor, wall, and ceiling systems that consists of plywood panels nailed and glued to a wood frame. ����������������������� 8. Floor beams in post-and-beam framing are placed 6¢-0≤ to ___ OC. ����������������������� 9. The roof beams in residential post-and-beam framing support boards that are ___≤ thick. ����������������������� 10. Buildings made with heavy structural members extending diagonally from the ridge to the foundation are ___. ����������������������� 11. Concrete reaches its design strength in approximately ___ days. ����������������������� 12. Foundation footings must be placed on ___ earth. ����������������������� 13. Asphalt sheet membranes are self-adhesive 60 mil sheets of rubberized asphalt laminated to ___ film. ����������������������� 14. The ends of joists supporting floors in a solid brick building are ___. ����������������������� 15. SCR brick are laid in a single ___. ����������������������� 16. The interior face of brick walls are usually lined with ___ strips before gypsum board is applied. ����������������������� 17. The base of a brick wall is often protected by metal ___ for moisture control. 143