43 Series Fittings
Catalog 4400 US Metric S / BSP
Use with 301LT, 302, 304, 351ST, 351TC, 422, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC, 482ST, 722TC, 881 hoses.
11C43
Female Metric S - Swivel - 90˚ Elbow - (24˚ Cone with O-Ring) ISO 12151-2 - SWE
A Part Number 11C43-8-4 11C43-10-4 11C43-12-5 11C43-12-6 11C43-14-6 11C43-16-8 11C43-20-10 11C43-25-12 11C43-30-16 11C43-38-20^^
8 10 12 12 14 16 20 25 30 38
Thread Hose I.D. mm inch M16x1,5 1/4 M18x1,5 1/4 M20x1,5 5/16 M20x1,5 3/8 M22x1,5 3/8 M24x1,5 1/2 M30x2 5/8 M36x2 3/4 M42x2 1 M52x2 1-1/4
A E inch mm inch mm 1.89 48 1.14 29 1.97 50 1.14 29 2.36 60 1.26 32 2.56 65 1.46 37 2.56 65 1.46 37 2.83 72 1.77 45 3.11 79 1.89 48 3.50 89 2.32 59 4.53 115 2.99 76 5.12 130 3.15 80
W mm 19 22 24 24 27 30 36 46 50 60
B inch 1.02 1.02 1.42 1.38 1.38 1.46 1.57 1.93 2.68 3.27
mm 26 26 36 35 35 37 40 49 68 83
^^Must be assembled with Die Part No. 83C-A20H in a Superkrimp or Parkrimp 2.
B
1D943
Male BSP Parallel Pipe - Rigid - (60° Cone) ISO 12151-6
C
D
Part Number 1D943-4-4 1D943-6-5 1D943-6-6 1D943-8-6 1D943-8-8 1D943-12-12 1D943-16-16
Thread inch 1/4x19 3/8x19 3/8x19 1/2x14 1/2x14 3/4x14 1x11
Hose I.D. inch 1/4 5/16 3/8 3/8 1/2 3/4 1
A inch 1.77 2.13 2.13 2.36 2.44 2.76 3.23
H mm 19 22 22 27 27 32 41
mm 45 54 54 60 62 70 82
B inch 0.91 1.22 1.22 1.22 1.10 1.18 1.38
mm 23 31 31 31 28 30 35
When used in a port, a bonded seal must be used. See Accessories Section for more information.
19243
Female BSP Parallel Pipe - Swivel - (60° Cone) ISO 12151-6
E
Part Number 19243-2-4 19243-4-4 19243-6-4 19243-6-6 19243-6-8 19243-8-6 19243-8-8 19243-10-8 19243-10-10 19243-12-10 19243-12-12 19243-16-16 19243-20-20
Thread inch 1/8x28 1/4x19 3/8x19 3/8x19 3/8x19 1/2x14 1/2x14 5/8x14 5/8x14 3/4x14 3/4x14 1x11 1-1/43
Hose I.D. inch 1/4 1/4 1/4 3/8 1/2 3/8 1/2 1/2 5/8 5/8 3/4 1 1-1/4
A inch 1.61 1.95 1.73 2.35 2.17 2.01 2.72 2.80 2.99 3.11 3.19 3.67 3.11
C mm 41 50 44 60 55 51 69 71 76 79 81 93 79
inch 0.20 0.22 0.26 0.26 0.26 0.28 0.28 0.37 0.37 0.35 0.35 0.44 0.41
mm 5 6 7 7 7 7 7 9 9 9 9 11 11
W mm 14 19 22 22 22 27 27 30 30 36 36 41 50
B inch 0.67 1.20 0.79 1.32 0.79 0.87 1.46 1.54 1.55 1.67 1.75 2.05 1.26
mm 17 30 20 34 20 22 37 39 39 42 44 52 32
When measuring overall length to the end of the nut, B+C dimensions must be used to calculate cut-off allowance.
B-56
Hose Products Division Parker Hannifin Corporation Wickliffe, Ohio www.parkerhose.com