C O N T E N T S
Le Portelet, Guernsey: Architect: BAS Mooarc, Guernsey Photography: Richard Brine
Residential (System 22) (System 48)
3-8 9-10
Commercial
11-14
Te c h n i c a l D a t a
15-16
Contact Info
17-18
Residential (System 22)
Using full height bi-parting sliding doors and glass to glass corners, the design allows for panoramic views of the Solent and Mainland. The adjoining block is clad in timber with sliding timber units across System 22 sliders which retract into wall voids.
T h ompson House, Isle of Wigh t Arch itect: T he M ans er Prac tis e
4
N
Residential (System 22)
This discrete London residence uses 3.2m high sliding doors and curtain walling to the courtyard, offering this residence both light and space.
Ch iswick L ane Arch itect: M ichaelis Boyd , Lond on. Contractor: Bas e Bu ild Lim ited .
6
Residential (System 22)
The elevated hillside residence overlooking the Channel uses the entire range of System 22 sliding, fixed panels and pivot doors complementing its design, with interaction of Fineline 22mm frames and standard glazing.
L e Etoile, G uer nsey Arch itect: BA S M ooarc , G u er ns ey P h otog raph er : Richard Brine
8
Residential (System 48)
This project in West London clearly shows the discrete benefits of profiles using System 48 folding sliding doors. With frame profiles of just 22mm open and 48mm when closed with effortless movement, System 48 brings the outside in.
West L ondon Residence P h otog raphy: Richard Brine
10
Commercial
With sliding units 3.2m in height and bi-parting units spanning 7m, our System 22 profiles offer uninterrupted sea views of the Channel and harbour for the restaurants diners. With pivot doors for side access, fixed and sliding doors on the first floor, Fineline can offer solutions in all aspects of the commercial sector.
Rock Salt Restaurant, Folkestone, Arch itects: G u y H ollow ay, H y the, Kent. P h otog raphy: M ark Whitf ield
12
Commercial
This Welcome, Reception Area and Restaurant allowed Fineline System 22 units to interface with oak timber frames. Using our bi-parting sliding doors with unit heights of 2.7m and level thresholds for ease of pedestrian access. Fineline bespoke designs offer solutions to public areas.
D avid Mellor Centre D esigned by: Dav id M ellor Des ign Lim ited
14
SYST EM 22. N BS SP EC SS L I D I N G D O O R
SYST EM 22. N BS SP EC SP I VOT D O O R S
General: All sections to be extruded from aluminium alloy specification 6060/6063 T6 complying with BS EN 755-9:2001. Aluminium profiles to be manufactured to BS EN 1509001/9002.
General: All sections to be extruded from aluminium alloy specification 6060/6063 T6 complying with BS EN 755-9:2001. Aluminium profiles to be manufactured to BS EN 1509001/9002.
The fabricated product to conform with BS 4873.
The fabricated product to conform with BS 4873.
The glass/framing sections to withstand the design wind loading calculated in accordance with BS 63099 pt2: 1995.
The glass/framing sections to withstand the design wind loading calculated in accordance with BS 63099 pt2: 1995.
System: Thermally broken outer frame sections mounted on a formed 4mm thick aluminium cill with welded stopped ends.Thermally broken glazing sections bonded to structurally calculated insulating glass units.
System: Thermally broken outer frame sections mounted on a formed 4mm thick aluminium cill with welded stopped ends. Thermally broken glazing sections bonded to structurally calculated insulating glass units.
MAXIMIUM PANEL WIDTH 3500mm MAXIMIUM PANEL HEIGHT 3000mm MAXIMIUM PANEL WEIGHT 350kgs (Units exceeding 2.4m in both directions are subject to extended lead times.)
MAXIMIUM PANEL WIDTH MAXIMIUM PANEL HEIGHT MAXIMIUM PANEL WEIGHT
1200mm 3000mm 135kgs
Standard glazing details: Hermetically sealed double glazed units to BS6262, BS EN 12600, BS5713 with black spacer bars and a P.I.B primary seal and silicone backing seal 32/34mm thick with a 16mm Argon filled cavity.
Standard glazing details: Hermetically sealed double glazed units to BS6262, BS EN 12600, BS5713 with black spacer bars and a P.I.B primary seal and silicone backing seal 32/34mm thick with a 16mm Argon filled cavity.
Incorporating: An outer pane of 10 or 12mm toughened float glass and an inner pane of 6 or 8mm toughened soft coat low-E glass.
Incorporating: An outer pane of 10,12 or 15mm toughened float glass and an inner pane of 6 or 8mm toughened soft coat low-E glass.
Glass to be toughened to BSEN 12150.
Glass to be toughened to BSEN 12150. Ironmongery and fittings: 75mm stainless steel rollers with needle bearings mounted in an enclosed carrier case. 300mm long stainless steel ‘D’ handles on purpose made steel brackets.
Ironmongery and fittings: Doors are hung on Dorma BTS75 Floor springs incorporating a Dorma adjustable pivot at the head. Stainless steel 19mm diameter ‘D’ handles 300mm long mounted on purpose made stainless steel brackets.
Fully rust proofed deadlock operated by Euro cylinder.
Shear Mag locks to head and in bottom rail.
15
S YST EM 4 8 F O L D I N G S L I D I N G D O O R S
Utilising the strength of the glass itself bonded to extruded 22mm alloy sections and using the finest stainless steel rolling hinges available we have been able to create a new folding sliding door system that provides the finest architectural lines ever seen. At last we have a folding system that directly compliments our fixed, sliding and pivot models - System 22, to great effect. The quality, finish and fixings used so successfully on our sliding range have again been used on System 48 ensuring continuing high standards and compatibilty. Practical, beautiful fine lines and the largest glass panels used anywhere, with double glazed units up to 2600mm high and 1000mm wide, the final result either open or closed is one of true refinement, redefining the folding door system. Effortless movement of these huge panels is achieved by clever innovation and by uncompromissing quality custom made components intergrated at the design stage and followed through manufacture to installation, ensuring many years of effortless daily use.
Typical Sections Details:
Te c h n i c a l D a t a
In addition to Systems 22 & 48 Fineline offer a comprehensive range of standard windows, doors, roof lights and curtain walling. For more detailed profiles, drawings or details on these products please contact our estimating department.
Performance is comparable to our System 22 units giving typically good ‘U’ values and full height integrated weather seals ensure a highly thermally efficient window system; (see tech spec). The basic structure of System 48 folding doors rely on our proven 22mm 6063T6 thermally broken alloy section, two are required, hinged to create a folding unit, each factory bonded to sealed double glazed panels resulting in one high strength unit. Each alloy section is thermally broken to make them thermally efficient and one of each pair contains a built in full height weather strip for full weather protection when closed. Alloy frames can be finished in Polyester Powder Coating to BS EN 12206-1:2004. Sealed glass units are double glazed typically 6mm inner low-E glass panel with up to 12mm toughened outer panel and a 16mm Argon filled cavity. 16
C o n t a c t
U s
Find us: Unit T, Aisecome Way, Weston- Super- Mare North Somer set, BS22 8NA Email us: enquiries@finelinealuminium.co.uk Call us: 01934 429922 Website: www.finelinealumnium.co.uk
Le Portelet, Guernsey: Architect:: BAS Mooarc, Guernsey Photography: Richard Brine
18
w w w. f i n e l i n e a l u m i n i u m . c o . u k
Unit T, Aisecombe Way, Weston-Super-Mare North Somerset, BS22 8NA 01934 429922