MEGAMAN® Technology
Controlling an LED MEGAMAN® offers a range of tailor
• Flicker free operation with stable
Linear dimming for LED with External
made LED converters to optimise the
output even with fluctuations of the
Drivers
performance of its LED reflector products
supply voltage
Linear dimming facilitates a smooth
• Automatic restart capability when
and modules.
short-circuit or overload is absent Please visit www.megamanlighting. com/LEDdimmers for the latest list of compatible dimmers and general dimming
traditional lamp sources.
• Equipped with harmonics filter to reduce main harmonics • Ambient temperature range -30°C to + 40°C
guidelines.
dimming experience comparable to
• Power factor >0.9 The current/voltage characteristic of an
• Protection class II
LED is similar to other diodes, in that the
• Compliant with international standards
The brightness level can be seamlessly dimmed from 100% down to 1% when the lamp is connected to a DC1-10V dimming driver and DC1-10V dimmer. INGENIUM® Smart Lighting
current is dependent exponentially on the
with respect to electromagnetic
MEGAMAN® also offers INGENIUM®
voltage; a small change in voltage can
interference
Smart Lighting solutions which give you
cause a large change in current. If the
full control, via your smart device or
maximum voltage rating is exceeded by a
Additionally the constant current
remote control, of the on/off, dimming
small amount, the current rating may be
converters allow linear dimming (100%-
and scene setting of your environment.
exceeded by a large amount, potentially
1%) with any DC1-10V dimmer.
Its ease of use, installation and scalability makes INGENIUM® perfect for an endless
damaging or destroying the LED. Total dimming solution To avoid this scenario, MEGAMAN® uses
list of applications.
The MEGAMAN® LED dimming series
constant current drivers with all of its LED
comes in two forms:
Please visit www.ingenium.cc for the
lamps, to ensure their stable operation.
• Linear dimming (for LED using
latest information on this fast evolving
By controlling the current through the LED in this way, the light output of the LED is
conventional* Dimmer Switches) • Linear dimming (DC1-10V) (for
equally regulated and no differences in
LED with external drivers DC1-10V
light output are observed.
dimming)
Additionally, MEGAMAN® offers LED
Linear dimming for LED using
reflectors for operation on AC/ DC12V.
conventional* Dimmer Switches
These products have an integrated
This provides a smooth dimming
constant current driver which allows
experience similar to that obtained with
operation directly on 12V AC/DC
traditional incandescent and halogen
transformers. When halogen transformers
lamps connected to a leading edge
are used to drive LED products care
dimmer.
should be taken that the transformers can cope running on low load - that means
To dim, turn the knob to achieve the
one lamp on one transformer may not
required brightness level from 100% to
provide enough load to keep it running.
10%.
All MEGAMAN® converters have a long service life of 50,000 hours and offer multiple benefits :
* There is no standard for dimmer switches therefore we cannot guarantee performance on every dimmer switch. Please visit www.megamanlighting.com/LEDdimmers for the latest list of compatible dimmers and general dimming guidelines.
150
technology.