SSS Anchor Base Poles Square Straight Steel
P R O D U C T
O V E R V I E W
Intended Use For 10’ to 39’ mounting height.
Anchor Bolts – Top 12" galvanized per ASTM A-153. Made of 3/4" or 1" diameter steel rod having a minimum-yield strength of 55,000 psi.
Features
Grounding – Nut holder located immediately inside handhole rim is provided with a 1/2" x13 UNC ground bolt and nut (by others).
Shaft – Weldable grade, hot-rolled, commercial-quality carbon steel tubing with a minimum yield of 55,000 psi (11-gauge), 50,000 psi (7gauge). Uniform wall thickness of .125" or .188". Shaft is one-piece with a full-length, longitudinal, high frequency electric resistance weld. Uniformly square in cross-section with flat sides, small corner radii and excellent torsional qualities. Available shaft widths are 4, 5 and 6 inches.
Handhole – 1/2”-13, Reinforced handhole rim having nominal dimensions of 3"x5" for all shafts. Includes steel cover with attachment screws.
Anchor Base – Fabricated from hot-rolled carbon steel plate that meets or exceeds a minimum-yield strength of 36,000 psi. The anchor base is provided with slotted holes.
Finish – Dark bronze polyester powder paint (DDB) standard; optional polyester powder paint finishes available.
Hardware – Fasteners are high-strength, galvanized or zinc-plated or stainless steel. Top Cap – Removable top cap is provided for drill mount poles.
Base Cover – Full-base cover finished to match pole. INSTALLATION NOTES:
Ordering Information: See page 191 (Note: Poles are available only in U.S.)
Technical Information EPA (ft2) with 1.3 gust Nom.
Pole
Catalog
mount. Shaft Size
Number
ht. (ft.) (in. x in. x ft.)
SSS 10 4C SSS 12 4C SSS 14 4C SSS 16 4C SSS 18 4C SSS 20 4C SSS 20 4G SSS 20 5C SSS 20 5G SSS 25 4C SSS 25 4G SSS 25 5C SSS 25 5G SSS 30 4G SSS 30 5C SSS 30 5G SSS 30 6G SSS 35 5G SSS 35 6G SSS 39 6G
10 12 14 16 18 20 20 20 20 25 25 25 25 30 30 30 30 35 35 39
4.0 x 10.0 4.0 x 12.0 4.0 x 14.0 4.0 x 16.0 4.0 x 18.0 4.0 x 20.0 4.0 x 20.0 5.0 x 20.0 5.0 x 20.0 4.0 x 25.0 4.0 x 25.0 5.0 x 25.0 5.0 x 25.0 4.0 x 30.0 5.0 x 30.0 5.0 x 30.0 6.0 x 30.0 5.0 x 35.0 6.0 x 35.0 6.0 x 39.0
Wall Thick.
80
Max.
90
Max.
100
Max.
(in.)
Gauge
mph
wt.
mph
wt.
mph
wt.
0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.125 0.188 0.125 0.188 0.125 0.188 0.188 0.125 0.188 0.188 0.188 0.188 0.188
11 11 11 11 11 11 7 11 7 11 7 11 7 7 11 7 7 7 7 7
30.6 24.4 19.9 15.9 12.6 9.6 14.0 17.7 28.1 4.8 10.8 9.8 18.5 6.0 4.7 10.7 19.0 5.9 12.4 7.2
765 610 498 398 315 240 350 443 703 150 270 245 463 150 150 267 475 150 310 180
23.8 18.8 15.1 11.8 9.2 6.7 11.0 12.7 21.4 2.6 7.7 6.3 13.3 4.0 2.0 6.7 13.2 2.5 7.6 3.0
595 470 378 295 230 167 275 343 535 100 188 157 333 100 50 167 330 100 190 75
18.9 14.8 11.7 8.9 6.7 4.5 8.0 9.4 16.2 1.0 5.4 3.7 9.5 2.5 — 3.9 9.0 — 4.2 —
473 370 293 223 168 150 200 235 405 50 135 150 238 75 — 100 225 — 105 —
Bolt
Bolt
Approx.
Circle
Size
ship wt.
(in.) (in. x in. x in.) (lbs.) 8–9 8–9 8–9 8–9 8–9 8–9 8–9 10–12 10–12 8–9 8–9 10–12 10–12 8–9 10–12 10–12 11–13 10–12 11–13 11–13
3/4 x 18 x 3 3/4 x 18 x 3 3/4 x 18 x 3 3/4 x 18 x 3 3/4 x 18 x 3 3/4 x 18 x 3 3/4 x 30 x 3 1 x 36 x 4 1 x 36 x 4 3/4 x 18 x 3 3/4 x 30 x 3 1 x 36 x 4 1 x 36 x 4 3/4 x 30 x 3 1 x 36 x 4 1 x 36 x 4 1 x 36 x 4 1 x 36 x 4 1 x 36 x 4 1 x 36 x 4
75 90 100 115 125 140 198 185 265 170 245 225 320 295 265 380 520 440 540 605
Installation requires grout to be packed under base to ensure full contact with foundation. Factory-supplied templates must be used when setting anchor bolts. American Electric Lighting will not accept claim for incorrect anchorage placement due to failure to use American Electric Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.
Pole Data Shaft Base size
Bolt circle A
Bolt projection B
Base square C
Warehouse Anchor Bolt description
Template number
4"C 4"G 5" 6"
8-1/2" 8-1/2" 10"–12" 11"–13"
2-3/4"–4" 2-3/4"–4" 3-3/8"–4" 3-3/8"–4"
8" 8" 11" 12-1/2"
AB18-0 AB30-0 AB36-0 AB36-0
PJ50004 PJ50004 PJ50010 PJ50011 NOTES: • Mounting Arrangement: (PT) Open Top; (T20) 2-3/8" O.D. • (2" NPS) • Drill Mounting: (DM19) 1 fixture at 90°; (DM28) 2 fixtures at 180° • Options: See page 202 • Brackets: See page 203-204
Product Guide
199