2015 COLOR SORTER SHAKER 32 ZEA ‐ 48 ZEA ‐ 64 ZEA
A&K Development Company ‐ Eugene, Oregon Phone: 541‐686‐0012 Web: www.akdco.net E‐Mail: akdco@akdco.net
2015 COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA 64 ZEA 32 ZEA ‐ 48 ZEA ‐ 64 ZEA
Section I
A&K Development Introduction
Warranty Authorization Notice
Section II
Flex Drive Motor Assembly
Common Parts Drive Configurations
Section III
Pulleys and Drive Assembly
Common Parts Pulley Sizes
Section IV
Conveyor Belt and Product Flow
Common Parts Conveyor Belt Sizes
Section V
Flex Shaker Assembly
Common Parts
Section VI
Isolator Mount Assembly
Common Parts
Section VII Shaker Arms and Counterweights
Common Parts
Section VIII Spring Weldment Counterweight Assembly
Common Parts
Section IX
All Common Parts
Master Spare Parts List
TOC
DEVELOPMENT COMPANY FOOD PROCESSING EQUIPMENT Tel: 541-686-0012
MANUFACTURE & DESIGN
410 Chambers Street Eugene, Oregon USA 97402
Fax: 541-485-2892 Email: akdevelop@aol.com
A&K Development Company, Inc. warrants A&K equipment and parts to be free from defects in material and workmanship on the date of purchase, for a period of one (1) processing season and the start-up of the second (2nd) processing season, and that the equipment provided by A&K shall conform to the specification and drawings. A&K will repair or replace any part of the equipment proved defective. This limited warranty applies only when equipment is properly installed, operated and maintained in accordance with A&K written recommendations. This warranty does not cover, and A&K shall not be liable for, any malfunction, damage or normal wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, improper adjustment, lack of lubrication or substitution of non A&K component parts nor shall A&K be liable for malfunction, damage or normal wear caused by the incompatibility with A&K equipment of structures, accessories, equipment or materials not supplied by A&K, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by A&K. A&K at its sole discretion determines whether the equipment is defective by reason of material or workmanship. The A&K limited warranty described in this paragraph is in lieu of any other A&K warranty. A&K makes no other warranties, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. THE SOLE AND EXCLUSIVE REMEDY for any breach of the A&K limited warranty shall be the repair or replacement for buyer, at A&K’s option and expense, of any equipment component or part manufactured by A&K, which proves to be in breach of the A&K limited warranty. Any repaired or replaced equipment component or part shall be provided F.O.B. factory.
A&K
SHALL UNDER NO CIRCUMSTANCES BE LIABLE TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR OTHER INDIRECT DAMAGES OF ANY KIND. This limited warranty and limitation of remedies gives you specified legal rights and you may also have other rights which vary from state to state.
A&K DEVELOPMENT POLICY 1. To constantly improve its products whenever it is practical to do so. 2. Reserves the right to redesign or change its equipment or component parts, without incurring any obligation to install or furnish such changes on equipment previously delivered. 3. Unauthorized changes or additions to equipment manufactured by A&K Development relieves the company of any further responsibility for warranty of operation and breakage replacement. 4. The information contained in this manual is representative of a typical system. Performance of the equipment is dependent on many factors not within the scope of the manual and should be considered in relation to the entire processing line. 5. This manual is intended only as an operation and maintenance guide for a typical system and is subject to change through revisions and additions without notification. 6. Authorization must be secured before any equipment or parts are returned for credit or replacement. When equipment or parts are returned, the freight must be prepaid or other arrangements made by A&K Development.
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER FLEX DRIVE MOTOR ASSEMBLY ‐ COMMON PARTS FLEX DRIVE MOTOR ASSEMBLY COMMON PARTS
QUANTITY PER A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA
64 ZEA
CSS‐15‐0001 1.5 HP MOTOR, 145T FRAME, 1800 RPM TEFC
1
1
1
1
CSS‐15‐0002 AK66H DRIVE SHEAVE, BLACKSTAR
1
1
1
1
CSS‐15‐0003 STEEL SPLIT TAPER BUSHING, DRIVE SHEAVE 1 1/8"
1
1
1
1
CSS‐15‐0004
SHEAVE LOWER 7/8" BORE, 60HZ ‐ 8‐LANE TO 32 ZEA, 1VL40
1
1
0
0
CSS‐15‐0004
SHEAVE LOWER 7/8" BORE, 60HZ ‐ 12‐LANE TO 32 ZEA , 1VL40
1
1
0
0
CSS‐15‐0004
SHEAVE LOWER 7/8" BORE, 60HZ ‐ 12‐LANE TO 48 ZEA, 1VL40
1
0
1
0
CSS‐15‐0005
SHEAVE LOWER 7/8" BORE, 60HZ ‐ 16‐LANE TO 48 ZEA, 1VL34
1
0
1
0
CSS‐15‐0004
SHEAVE LOWER 7/8" BORE, 50HZ ‐ 16‐LANE TO 48 ZEA, 1VL40
1
0
1
0
CSS‐15‐0005
SHEAVE LOWER 7/8" BORE, 60HZ ‐ 16‐LANE TO 64 ZEA, 1VL34
1
0
0
1
CSS‐15‐0004
SHEAVE LOWER 7/8" BORE, 50HZ ‐ 16‐LANE TO 64 ZEA, 1VL40
1
0
0
1
CSS‐15‐0006 V‐BELT, 60HZ ‐ 8‐LANE TO 32 ZEA, A34
1
1
0
0
CSS 15 0006 V‐BELT, 60HZ ‐ 12‐LANE TO 32 ZEA, A34 CSS‐15‐0006 V BELT 60HZ 12 LANE TO 32 ZEA A34
1
1
0
0
CSS‐15‐0006 V‐BELT, 60HZ ‐ 12‐LANE TO 48 ZEA, A34
1
0
1
0
CSS‐15‐0007 V‐BELT, 60HZ ‐ 16‐LANE TO 48 ZEA, A33
1
0
1
0 1
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER FLEX DRIVE MOTOR ASSEMBLY ‐ COMMON PARTS FLEX DRIVE MOTOR ASSEMBLY COMMON PARTS
QUANTITY PER A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA
64 ZEA
CSS‐15‐0006 V‐BELT, 50HZ ‐ 16‐LANE TO 48 ZEA, A34
1
0
1
0
CSS‐15‐0007 V‐BELT, 60HZ ‐ 16‐LANE TO 64 ZEA, A33
1
0
0
1
CSS‐15‐0007 V‐BELT, 50HZ ‐ 16‐LANE TO 64 ZEA, A33
1
0
0
1
MOTOR MOUNT ‐ HARDWARE
QUANTITY QUANTITY PER A&K PART
ITEM DESCRIPTION
COLOR SORTER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA
64 ZEA
CSS‐15‐0008 1/2"‐13 X 1 3/4" HEX BOLT
1
1
1
1
CSS‐15‐0009 1/2"‐13 X 1 1/2" SHCS
1
1
1
1
2
2
2
2
CSS‐15‐0010 1/2" FLAT WASHER
1
1
1
1
CSS‐15‐0033 1/2" LOCK WASHER
1
1
1
1
417
1/2" CAM LOCK (PAIR)
2
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER FLEX DRIVE AND MOTOR ASSEMBLY FLEX DRIVE AND MOTOR ASSEMBLY
LETTER
ITEM DESCRIPTION
PART #
A
V‐BELT
SEE CHART ON PAGE 4
B
LOWER SHEAVE (ADJUSTABLE) LOWER SHEAVE (ADJUSTABLE)
SEE CHART ON PAGE 4 SEE CHART ON PAGE 4
C
AK66H DRIVE SHEAVE, BLACKSTAR
CSS‐15‐002
D
STEEL SPLIT TAPER BUSHING, DRIVE SHEAVE 1 1/8
CSS‐15‐003
3
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER COLOR SORTER SHAKER FEEDER: V‐BELTS COLOR SORTER SHAKER FEEDER: V BELTS & SHEAVES & SHEAVES CONFIGURATION
V‐BELT
LOWER SHEAVE
Color Sorter Configuration: 8‐Lane to 32 Zea 60hz
CSS‐15‐0006
CSS‐15‐0004
Color Sorter Configuration: 8‐Lane to 32 Zea 50hz Color Sorter Configuration: 8‐Lane to 32 Zea 50hz
Pending
Pending
Color Sorter Configuration: 12‐Lane to 32 Zea 60hz
CSS‐15‐0006
CSS‐15‐0004
Color Sorter Configuration: 12‐Lane to 32 Zea 50hz
Pending
Pending
Color Sorter Configuration: 12‐Lane to 48 Zea 60hz
CSS‐15‐0006
CSS‐15‐0004
Color Sorter Configuration: 12 Lane to 48 Zea 50hz Color Sorter Configuration: 12‐Lane to 48 Zea 50hz
Pending
Pending
Color Sorter Configuration: 16‐Lane to 48 Zea 60hz
CSS‐15‐0007
CSS‐15‐0005
Color Sorter Configuration: 16‐Lane to 48 Zea 50hz
CSS‐15‐0006
CSS‐15‐0004
Color Sorter Configuration: 16‐Lane to 64 Zea 60hz
CSS‐15‐0007
CSS‐15‐0005
C l S t C fi Color Sorter Configuration: 16‐Lane to 64 Zea 50hz ti 16 L t 64 Z 50h
CSS CSS‐15‐0007 15 0007
CSS CSS‐15‐0004 15 0004
4
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER PULLEY & DRIVE ASSEMBLY ‐ COMMON PARTS PULLEY & DRIVE ASSEMBLY COMMON PARTS
QUANTITY PER A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA
64 ZEA
DP‐14‐CS‐A03 DRIVE PULLEY, ALUMINUM, 32 ZEA (8‐LANE)
1
1
0
0
TP‐14‐CS‐A03 TAIL PULLEY, ALUMINUM, 32 ZEA (8‐LANE)
1
1
0
0
DP‐14‐CS‐A05 DRIVE PULLEY, ALUMINUM, 48 ZEA (12‐LANE)
1
0
1
0
TP‐14‐CS‐A04 TAIL PULLEY, ALUMINUM, 48 ZEA (12‐LANE)
1
0
1
0
DP‐14‐CS‐A01 DRIVE PULLEY, ALUMINUM, 64 ZEA (16‐LANE)
1
0
0
1
TP‐14‐CS‐A01 TAIL PULLEY, ALUMINUM, 64 ZEA (16‐LANE)
1
0
0
1
CSS‐15‐0011 1 HP MOTOR, 1800 RPM 230/460 V 60HZ 56C TEFC
1
1
1
1
CSS‐15‐0012 GEARBOX, 10:1 CONE DRIVE
1
1
1
1
CSS‐15‐0013
SPLIT COLLARS 1 7/16" (USED WITH PULLEYS & GEARBOX)
5
5
5
5
CSS 15 0014 CSS‐15‐0014
UCFT 207 23 BEARING 1 7/16 BORE (USED WITH UCFT 207 23 BEARING 1 7/16" BORE PULLEYS)
4
4
4
4
5
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER PULLEY & DRIVE ASSEMBLY ‐ HARDWARE PULLEY & DRIVE ASSEMBLY HARDWARE
QUANTITY PER A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA
64 ZEA
CSS‐15‐0015 3/8" X 1" HEX BOLT (MOTOR TO GEARBOX)
4
4
4
4
CSS‐15‐0034 1/2" X 1 3/4" HEX BOLT (2 PER 1 7/16" BEARING)
8
8
8
8
CSS‐15‐0036 3/8" X 1 1/4" HEX BOLT (6 PER PULLEY)
12
12
12
12
CSS‐15‐0037 3/8" LOCK WASHER (6 PER PULLEY)
12
12
12
12
6
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER PULLEY & DRIVE ASSEMBLY PULLEY & DRIVE ASSEMBLY
LETTER
ITEM DESCRIPTION
PART #
A
GEARBOX, 10:1 CONE DRIVE
CSS‐15‐0012
B
1 HP MOTOR 1800 RPM 230/460 V 60HZ 56C TEFC 1 HP MOTOR, 1800 RPM 230/460 V 60HZ 56C TEFC
CSS‐15‐0011
7
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER PULLEY & DRIVE ASSEMBLY PULLEY & DRIVE ASSEMBLY
LETTER
ITEM DESCRIPTION
PART #
A
SPLIT COLLARS 1 7/16" (USED WITH PULLEYS & GEARBOX))
CSS‐15‐0013
B
UCFT 207 23 BEARING 1 7/16" BORE (PULLEYS)
CSS‐15‐0014
C
DRIVE PULLEY, ALUMINUM, 32 ZEA (8‐LANE)
DP‐14‐CS‐A03
D
TAIL PULLEY, ALUMINUM, 32 ZEA (8‐LANE)
TP‐14‐CS‐A03
C
DRIVE PULLEY ALUMINUM 48 ZEA (12‐LANE) DRIVE PULLEY, ALUMINUM, 48 ZEA (12 LANE)
DP 14 CS A05 DP‐14‐CS‐A05
D
TAIL PULLEY, ALUMINUM, 48 ZEA (12‐LANE)
TP‐14‐CS‐A04
C
DRIVE PULLEY, ALUMINUM, 64 ZEA (16‐LANE)
DP‐14‐CS‐A01
D
TAIL PULLEY, ALUMINUM, 64 ZEA (16‐LANE)
TP‐14‐CS‐A01
8
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
34.000
E
.250
E
3.063
30.376
.250
SECTION A-A SCALE 1 : 5
11.875 D
D
C
C
A
B
B
PART NUMBER: DP-14-CS-A03 DESCRIPTION : 8L COLOR SORTER PULLEY ( ZEA 32" )
DEVELOPMENT COMPANY
A
ITEM NO.
PART NUMBER
MATERIAL
REV
THICKNESS
DESCRIPTION
1
AK-14-DP-02
6061-T6 ROUNDBAR
8L CS PULLEY ( ZEA 32" )
1
2
AK-14-CS-P-A01
SEE BOM
PULLEY TAPER BUSHING
2
3
AK-14-CS-P-03
A36 M/S ROUND BAR
KEYED SHAFT
1
4
AK-14-CS-P-04
A36 M/S ROUND BAR
KEYED SHAFT
1
8
7
6
5
FOOD PROCESSING EQUIPMENT
THICKNESS:
QTY. MATERIAL: SEE BOM
PRESS BRAKE INFORMATION
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
.X = + OR - .030
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 8/19/2013
Drawn By: CRAIG
FINISH:
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:52.688 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\PULLEYS\
A
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
E
34.000
E
30.376 1.812
1.812
D
D
SECTION A-A SCALE 1 : 4
C
C
1 3
A
2
B
B
PART NUMBER: TP-14-CS-A03 DESCRIPTION : 8L COLOR SORTER PULLEY ( ZEA 32" )
DEVELOPMENT COMPANY
A
MATERIAL: SEE BOM ITEM NO.
PART NUMBER
MATERIAL
1
AK-14-DP-02
6061-T6 ROUNDBAR
8L CS PULLEY ( ZEA 32" )
2
AK-14-CS-P-A01
SEE BOM
PULLEY TAPER BUSHING
2
3
AK-14-CS-P-04
A36 M/S ROUND BAR
KEYED SHAFT
2
8
7
REV
THICKNESS
DESCRIPTION
6
THICKNESS:
QTY. FINISH: 1 PRESS BRAKE INFORMATION
5
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
FRACTION = + OR - 1/16"
3
MANUFACTURE & DESIGN
DATE: 8/19/2013
Drawn By: CRAIG .X = + O R - .0 3 0
4
FOOD PROCESSING EQUIPMENT
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:48.884 REVISION 1
A
Drawing Location: Y:\01-A&K ENGINEERING FILES\PULLEYS\
A
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
65.616
50.178
E
E
46.554
11.875 .250
3.063
.250
SECTION A-A SCALE 1 : 6
D
D
C
C
A
3
2
4
1
B
B
PART NUMBER: DP-14-CS-A05 DESCRIPTION : 12L COLOR SORTER ROJAS ( ZEA 48" )
DEVELOPMENT COMPANY
A
ITEM NO.
PART NUMBER
MATERIAL
REV
THICKNESS
DESCRIPTION
1
AK-14-DP-03
6061-T6 ROUNDBAR
12L CS PULLEY ( ZEA 48" )
1
2
AK-14-CS-P-A01
SEE BOM
PULLEY TAPER BUSHING
2
3
AK-14-CS-P-03
A36 M/S ROUND BAR
KEYED SHAFT
1
4
AK-14-CS-P-04
A36 M/S ROUND BAR
KEYED SHAFT
1
8
7
6
5
FOOD PROCESSING EQUIPMENT
THICKNESS:
QTY. MATERIAL: SEE BOM
PRESS BRAKE INFORMATION
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
.X = + OR - .030
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 8/19/2013
Drawn By: CRAIG
FINISH:
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:72.518 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\Pulleys\
A
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
56.804 50.178 E
46.554
E
3.063
SECTION A-A SCALE 1 : 6
.250
D
D
C
C
1
A
2
A
B
B
PART NUMBER: TP-14-CS-A04 DESCRIPTION : 12L COLOR SORTER PULLEY ( ZEA 48" )
DEVELOPMENT COMPANY
A
MATERIAL: SEE BOM ITEM NO.
PART NUMBER
MATERIAL
1
AK-14-DP-03
6061-T6 ROUNDBAR
12L CS PULLEY ( ZEA 48" )
2
AK-14-CS-P-A01
SEE BOM
PULLEY TAPER BUSHING
2
3
AK-14-CS-P-04
A36 M/S ROUND BAR
KEYED SHAFT
2
8
7
REV
THICKNESS
DESCRIPTION
6
THICKNESS:
QTY. FINISH: 1 PRESS BRAKE INFORMATION
5
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
FRACTION = + OR - 1/16"
3
MANUFACTURE & DESIGN
DATE: 8/19/2013
Drawn By: CRAIG .X = + O R - .0 3 0
4
FOOD PROCESSING EQUIPMENT
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:68.715 REVISION 1
A
Drawing Location: Y:\01-A&K ENGINEERING FILES\PULLEYS\
3
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
E
E
66.000
1
2 4
D
D
SECTION A-A SCALE 1 : 6
62.376
C
C
A
A 3
4.000
3.564
B
B
PART NUMBER: DP-14-CS-A01 DESCRIPTION : 16L COLOR SORTER PULLEY
DEVELOPMENT COMPANY
A
ITEM NO.
PART NUMBER
MATERIAL
REV
THICKNESS
DESCRIPTION
1
AK-14-CS-P-03
A36 M/S ROUND BAR
KEYED SHAFT
1
2
AK-14-CS-P-04
A36 M/S ROUND BAR
KEYED SHAFT
1
3
AK-14-CS-P-A01
SEE BOM
PULLEY TAPER BUSHING
2
4
AK-14-DP-01
6061-T6 ROUNDBAR
16L CS PULLEY
1
8
7
6
5
FOOD PROCESSING EQUIPMENT
THICKNESS:
QTY. MATERIAL: SEE BOM
PRESS BRAKE INFORMATION
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
.X = + OR - .030
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 8/19/2013
Drawn By: CRAIG
FINISH:
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:91.889 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\Pulleys\
81.438
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
E
E
D
D
3 1
SECTION B-B SCALE 1 : 6
C
C
66.000 62.376 2
B
B
B
72.626
PART NUMBER: TP-14-CS-A01 DESCRIPTION : 16L COLOR SORTER PULLEY
DEVELOPMENT COMPANY
A
MATERIAL: SEE BOM ITEM NO.
PART NUMBER
MATERIAL
1
AK-14-DP-01
6061-T6 ROUNDBAR
16L CS PULLEY
2
AK-14-CS-P-A01
SEE BOM
PULLEY TAPER BUSHING
2
3
AK-14-CS-P-04
A36 M/S ROUND BAR
KEYED SHAFT
2
8
7
REV
THICKNESS
DESCRIPTION
6
THICKNESS:
QTY. FINISH: 1 PRESS BRAKE INFORMATION
5
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
FRACTION = + OR - 1/16"
3
MANUFACTURE & DESIGN
DATE: 8/19/2013
Drawn By: CRAIG .X = + O R - .0 3 0
4
FOOD PROCESSING EQUIPMENT
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:88.065 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\Pulleys\
B
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER CONVEYOR BELT & PRODUCT FLOW ‐ COMMON PARTS CONVEYOR BELT & PRODUCT FLOW COMMON PARTS
A&K PART
ITEM DESCRIPTION
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER
COLOR COLOR SORTER
32 ZEA 48 ZEA 64 ZEA
AK‐14‐CS‐246 CONVEYOR BELT, 32 ZEA SEED CORN, 34" X 64 5/8"
1
1
0
0
AK‐14‐CS‐249 CONVEYOR BELT, 48 ZEA SEED CORN 50.178" X 64 5/8"
1
0
1
0
AK‐14‐CS‐229 CONVEYOR BELT, 64 ZEA SEED CORN, 66" X 64 5/8"
1
0
0
1
AK‐13‐CS‐211 CORN DIVIDER (SHORT) STANDARD
‐
13
19
25
AK‐13‐CS‐310 UHMW LIFT ROLLERS
‐
12
18
24
CONVEYOR BELT & PRODUCT FLOW ‐ HARDWARE
A&K PART A&K PART
ITEM DESCRIPTION ITEM DESCRIPTION
CSS‐15‐0016 5/16"‐18 HEX NUT (2 PER DIVIDER)
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER
COLOR SORTER
32 ZEA 48 ZEA 32 ZEA 48 ZEA 64 ZEA 64 ZEA
‐
26
38
50
15
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER CONVEYOR BELT & PRODUCT FLOW CONVEYOR BELT & PRODUCT FLOW
LETTER A
ITEM DESCRIPTION UHMW LIFT ROLLERS
PART # AK‐13‐CS‐310
16
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER CONVEYOR & PRODUCT FLOW CONVEYOR & PRODUCT FLOW LETTER
ITEM DESCRIPTION
PART #
A
CORN DIVIDER (SHORT) STANDARD
AK‐13‐CS‐211
B
5/16"‐18 5/16 ‐18 HEX NUT (2 PER DIVIDER) HEX NUT (2 PER DIVIDER)
CSS‐15‐0016
17
8
7
6
4
5
1
2
3
REVISIONS
BELT LENGTH 64.625
ZONE
REV.
DESCRIPTION
DATE
APPROVED
CLIP LACING
17.000
C 2.637
F
2.637
E
E
.187
D
.125
D
1.562
D
CL
C SECTION A-A SCALE 1 : 6
.125
SECTION C-C SCALE 1 : 6
R2.000
DETAIL D SCALE 1 : 3
C
26.000 34.000
A
A
B
2.637
B
2.274 2X
B
1.542
.250
PART NUMBER: AK-14-CS-246 DESCRIPTION : BELTING 32 ZEA A
DEVELOPMENT COMPANY
DETAIL B SCALE 1 : 2.5
MATERIAL: Material <not specified> FINISH:
8
7
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH 6
5
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .X = + O R - .0 3 0
.XX = + OR - .020
FRACTION = + OR - 1/16"
4
FOOD PROCESSING EQUIPMENT
3
MANUFACTURE & DESIGN
DATE: 7/20/2011
Drawn By: CRAIG PRESS BRAKE INFORMATION
.750 2X
1.500 TYP.
THICKNESS:
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:25.050 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
C
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
25.089
C 2.637 TYP.
E
E
D
D
.187
D
CL
C
SECTION A-A SCALE 1 : 7
.125
SECTION C-C SCALE 1 : 7
.125
DETAIL D SCALE 2 : 7
R2.000
C
50.178
26.000
A
B
C
A
B
B
2.637 TYP.
R.406
.250
PART NUMBER: AK-14-CS-249 DESCRIPTION : BELTING 48 ZEA ( SEED )
DEVELOPMENT COMPANY
A
PRESS BRAKE INFORMATION
DETAIL B SCALE 2 : 7
1.356
1.500 TYP. 8
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
7
6
5
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
.X = + OR - .030
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 7/20/2011
Drawn By: CRAIG
FINISH:
FOOD PROCESSING EQUIPMENT
THICKNESS:
MATERIAL: Material <not specified>
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:37.726 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
1.562 2X
8
7
6
4
5
1
2
3
REVISIONS
BELT LENGTH 64.625
ZONE
REV.
DESCRIPTION
DATE
APPROVED
CLIP LACING F
33.000
C
2.637
2.637
E
E
B D
1.562
C
.187
CL
.125
SECTION C-C
SECTION A-A
D
.125
R2.000
C
DETAIL B SCALE 1 : 4
66.000 26.000
A
A
E
B
B
2.637 TYP.
PART NUMBER: AK-14-CS-229 DESCRIPTION : BELTING 64 ZEA
.250 TYP.
DEVELOPMENT COMPANY
A
MATERIAL: Material <not specified> DETAIL E SCALE 1 : 4
8
FINISH:
R.406 TYP.
1.500 TYP. 7
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH 6
5
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .X = + OR - .030
.XX = + OR - .020
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 7/20/2011
Drawn By: CRAIG PRESS BRAKE INFORMATION
FOOD PROCESSING EQUIPMENT
THICKNESS:
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:49.344 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
C
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER FLEX SHAKER ASSEMBLY ‐ COMMON PARTS FLEX SHAKER ASSEMBLY COMMON PARTS
A&K PART
ITEM DESCRIPTION
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER
COLOR COLOR SORTER
32 ZEA 48 ZEA 64 ZEA
AK‐13‐CS‐A115
COLOR SORTER SHAKER DRIVE ASSEMBLY (ONLY SOLD AS AN ASSEMBLY)
1
1
1
1
AK‐13‐CS‐A116
DRIVE SPRING BOARD ASSY (4 PER SET) WITH HARDWARE (ONLY SOLD AS SET OF 4)
1
1
1
1
FLEX SHAKER ASSEMBLY ‐ HARDWARE
A&K PART CSS 15 0017 CSS‐15‐0017
ITEM DESCRIPTION
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER
COLOR SORTER
32 ZEA 48 ZEA 64 ZEA
7/16" 7/16"‐14 X 1 3/4" HEX BOLT GRADE 8 14 X 1 3/4" HEX BOLT GRADE 8
16
16
16
16
7/16" CAM LOCK WASHERS (PAIR)
16
16
16
16
CSS‐15‐0018
5/16"‐18 X 1 1/2"HEX BOLT GRADE 8
8
8
8
8
CSS‐15‐0019
5/16"‐18 NYLON INSERT LOCK NUT
8
8
8
8
006
21
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER FLEX SHAKER ASSEMBLY FLEX SHAKER ASSEMBLY LETTER A
PART #
ITEM DESCRIPTION COLOR SORTER SHAKER DRIVE ASSEMBLY (ONLY SOLD AS AN ASSEMBLY))
AK‐13‐CS‐A115
22
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER FLEX SHAKER ASSEMBLY FLEX SHAKER ASSEMBLY LETTER A
ITEM DESCRIPTION DRIVE SPRING BOARD ASSY (4 PER SET) WITH HARDWARE (ONLY SOLD AS SET OF 4) ( )
PART # AK‐13‐CS‐A116
23
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
E
E
1
D
D
5
C
C
A
7
6
4
2
B
B
A SECTION A-A SCALE 1 : 1.75
ITEM NO.
A
PART NUMBER
MATERIAL
REV A
1
AK-11-FDS-219
2
AK-11-FDS-SBO-021
AISI TGP 1045 ROUND BAR AISI TGP 1045 ROUND BAR
3
AK-11-FDS-SBO-022
4
AK-11-FDS-SBO-027
5
AK-11-FDS-SBO-A07
THICKNESS
DESCRIPTION
QTY.
16L FDS SPRING SHAFT
1
.060 OFFSET
4
A36 M/S ROUND BAR
BEARING OFFSET PIN
6
AISI TGP 1045 ROUND BAR Material <not specified>
.000 OFFSET
2
BEARING HOUSING ASSY
6
6
N-07
Material <not specified>
ADAPTER SLEEVE NUT
6
7
W-07
Material <not specified>
ADAPTER SLEEVE WASHER
6
8
7
6
5
PART NUMBER: AK-13-CS-A115 DESCRIPTION : COLOR SORTER SHAKER DRIVE ASSEMBLY
DEVELOPMENT COMPANY MATERIAL: SEE BOM
FOOD PROCESSING EQUIPMENT
THICKNESS:
FINISH: BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .X = + OR - .030
.XX = + OR - .020
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 6/29/2012
Drawn By: CRAIG PRESS BRAKE INFORMATION
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:23.00 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
3
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
29.875 E
E
D
D
C
C
4
3
2
1
B
B
PART NUMBER: AK-13-CS-A116 DESCRIPTION : DRIVE SPRING BOARD ASSEMBLY
DEVELOPMENT COMPANY
A
ITEM NO.
PART NUMBER
MATERIAL
1
AK-09-FDS-259
ASTM A36 Steel
B
.187
SPRING BRACKET
2
2
AK-11-FDS-159
Scotch Ply
B
.510
1/2 SCOTCH PLY (SPRING)
1
3
AK-11-FDS-225
Scotch Ply
.125
SPRING BRACKET SHIM
2
4
AK-11-FDS-226
ASTM A36 Steel
.187
SPRING BRACKET
2
8
7
REV
B
THICKNESS
DESCRIPTION
6
QTY. MATERIAL: SEE BOM
5
FOOD PROCESSING EQUIPMENT
THICKNESS:
FINISH: BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .X = + OR - .030
.XX = + OR - .020
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 11/29/2012
Drawn By: CRAIG PRESS BRAKE INFORMATION
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:6.421 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
2.5
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER ISOLATOR MOUNT ASSEMBLY ‐ COMMON PARTS ISOLATOR MOUNT ASSEMBLY COMMON PARTS
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA 64 ZEA
A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
AK‐14‐CS‐A053
LOWER SPRING ASSY (INCLUDES URETHANE ISOLATOR, SPRING AND 2 CAPTURES)
4
4
4
4
LOWER SPRING ‐ HEAVY (1 PER SPRING ASSY)
18
18
18
18
4
4
4
4
313
AK‐14‐CS‐236 SPRING ISOLATOR (URETHANE)
ISOLATOR MOUNT ASSEMBLY ‐ HARDWARE
A&K PART
ITEM DESCRIPTION
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER PER COLOR SORTER SHAKER FEEDER
COLOR SORTER
32 ZEA 48 ZEA 64 ZEA
CSS‐15‐0020
1/2"‐13 X 4" HEX BOLT GRADE 8
4
4
4
4
CSS 15 0010 CSS‐15‐0010
1/2" 1/2" FLAT WASHER FLAT WASHER
8
8
8
8
CSS‐15‐0022
1/2"‐13 NYLOCK NUT
4
4
4
4
26
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER ISOLATOR MOUNT ASSEMBLY ISOLATOR MOUNT ASSEMBLY
LETTER
ITEM DESCRIPTION
PART #
A
LOWER SPRING ASSY (INCLUDES URETHANE ISOLATOR, SPRING AND 2 CAPTURES))
AK‐14‐CS‐A053
27
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
2
E
E
1.875 D
D
3
A
C
2.061
2.249
B
B
A
SECTION A-A SCALE 1.5 : 1
PART NUMBER: AK-14-CS-A053 DESCRIPTION : SPRING ASSEMBLY
DEVELOPMENT COMPANY
A
PART NUMBER
MATERIAL
2
AK-14-CS-235
A36 M/S ROUND BAR
3
AK-14-CS-236
Polyurethane
8
7
REV
THICKNESS
DESCRIPTION
A 6
QTY.
SPRING CAPTURE
2
SPRING ISOLATER
1 5
PRESS BRAKE INFORMATION
BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .XX = + OR - .020
.X = + OR - .030
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 4/18/2014
Drawn By: CRAIG
FINISH: ITEM NO.
FOOD PROCESSING EQUIPMENT
THICKNESS:
MATERIAL: SEE BOM
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:0.628 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
C
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER SHAKER ARMS & COUNTERWEIGHTS ‐ COMMON PARTS SHAKER ARMS & COUNTERWEIGHTS COMMON PARTS
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA 64 ZEA
A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
DB‐13‐A01
SHAKER ARM ASSY ‐ SHAKER ARM WITH BUSHINGS (NO SPRINGS)
12
12
12
12
314
UPPER SPRING, LIGHT (1 PER SHAKER ARM)
12
12
12
12
313
LOWER SPRING ‐ HEAVY (1 PER SHAKER ARM)
18
18
18
18
8
8
8
8
AK‐13‐CS‐105 COUNTER WEIGHT
SHAKER ARMS & COUNTERWEIGHTS ‐ HARDWARE
A&K PART
ITEM DESCRIPTION
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER
COLOR SORTER
32 ZEA 48 ZEA 64 ZEA
CSS 15 0023 CSS‐15‐0023
5/8" 5/8"‐11 X 4 3/4" HEX BOLT 11 X 4 3/4" HEX BOLT
6
6
6
6
CSS‐15‐0024
5/8"‐11 X 3 1/2" HEX BOLT
12
12
12
12
CSS‐15‐0025
5/8"‐11 X 4" HEX CAP BOLT
6
6
6
6
CSS‐15‐0026
5/8" EXTERNAL TOOTH LOCK WASHER
24
24
24
24
CSS‐15‐0027
5/8"‐11 JAM NUT
12
12
12
12
CSS‐15‐0028
5/8"‐11 REGULAR NUT
12
12
12
12
29
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER SHAKER ARM ASSEMBLY SHAKER ARM ASSEMBLY
LETTER
ITEM DESCRIPTION
PART #
A
SHAKER ARM ASSY ‐ SHAKER ARM WITH BUSHINGS (NO SPRINGS))
DB‐13‐A01
B
UPPER SPRING, LIGHT
314
C
LOWER SPRING ‐ HEAVY
313
30
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER COUNTERWEIGHTS
LETTER A
ITEM DESCRIPTION COUNTER WEIGHT
PART # AK‐13‐CS‐105
31
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
E
E
D
D
10.688
C
C
B
2.250
B
PART NUMBER: DB-13-A01 DESCRIPTION : SHAKER ARM ( DOG BONE )
DEVELOPMENT COMPANY
A
FINISH: BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH 8
7
6
5
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .X = + OR - .030
.XX = + OR - .020
FRACTION = + OR - 1/16"
4
MANUFACTURE & DESIGN
DATE: 12/26/1998
Drawn By: PRESS BRAKE INFORMATION
FOOD PROCESSING EQUIPMENT
THICKNESS:
MATERIAL: Material <not specified>
3
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:3.579 REVISION 1
A
Drawing Location: F:\01-PMF-EngineeringOfficeFiles\Customer Info\A&K\A&K-2005 Thru 2050\Shaker\Flex Drive Feed Shaker\
F
8
7
6
4
5
1
2
3
REVISIONS ZONE
REV.
DESCRIPTION
DATE
APPROVED
F
E
E
29.328
D
D
.781 C
5.000
.500
B
B
PART NUMBER: AK-13-CS-105 DESCRIPTION : COUNTER WEIGHT
DEVELOPMENT COMPANY
A
MATERIAL: ASTM A36 Steel FINISH: BENGAL SILVER BEND DEDUCTION PRESS BRAKE V DIE PRESS BRAKE PUNCH 8
7
6
5
UNLESS OTHERWISE SPECIFIED TOLERANCE INFORMATION .X = + OR - .030
.XX = + OR - .020
FRACTION = + OR - 1/16"
4
3
MANUFACTURE & DESIGN
DATE: 10/6/2009
Drawn By: CRAIG
PRESS BRAKE INFORMATION
FOOD PROCESSING EQUIPMENT
THICKNESS: .500
.XXX = + OR - .010
410 CHAMBERS ST. EUGENE, OR 97402 - TEL (541) 686-0012 FAX (541) 485-2892 THIRD ANGLE PROJECTION
ANGLES = + OR - 1/2 DEG
2
SCALE: 1:8 SHEET 1 OF 1
WEIGHT:16.741 REVISION 1
A
Drawing Location: Y:\01-A&K Engineering Files\A&K Machinery\Color Sorter\
C
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER SPRING WELDMENT, COUNTERWEIGHT ‐ COMMON PARTS SPRING WELDMENT, COUNTERWEIGHT COMMON PARTS
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER 32 ZEA 48 ZEA 64 ZEA
A&K PART
ITEM DESCRIPTION
COLOR COLOR SORTER
CSS‐15‐0029
SPRING WELDMENT ASSY ‐ INCLUDES #AK‐13‐CS‐A129, 3/4"‐10 X 5" BOLT, 3/4" NUT AND CUP. (DOES NOT INCLUDE SPRING OR SECURING HARDWARE)
2
2
2
2
LOWER SPRING ‐ HEAVY
18
18
18
18
313
SPRING WELDMENT, COUNTERWEIGHT ‐ HARDWARE
A&K PART
ITEM DESCRIPTION
QUANTITY PER
QUANTITY REQUIRED PER COLOR SORTER SHAKER FEEDER
COLOR SORTER
32 ZEA 48 ZEA 64 ZEA
CSS 15 0030 CSS‐15‐0030
3/8" 3/8" FLAT WASHER FLAT WASHER
4
4
4
4
CSS‐15‐0031
3/8" LOCK WASHER
4
4
4
4
CSS‐15‐0032
3/8"‐16 X 1 3/4" HEX BOLT
4
4
4
4
34
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER SPRING WELDMENT, COUNTERWEIGHT ASSEMBLY SPRING WELDMENT, COUNTERWEIGHT ASSEMBLY
LETTER
PART #
ITEM DESCRIPTION
A
SPRING WELDMENT ASSY (INCLUDES #AK‐13‐CS‐A129, 3/4"‐10 X 5" BOLT, 3/4" NUT AND CUP. DOES NOT INCLUDE SPRING OR SECURING HARDWARE INCLUDE SPRING OR SECURING HARDWARE
B
LOWER SPRING ‐ HEAVY
CSS‐15‐0029 313
35
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER COMMON PARTS COMMON PARTS
A&K PART #
ITEM DESCRIPTION
006
7/16" CAM LOCK WASHERS (PAIR)
313
LOWER SPRING ‐ HEAVY LOWER SPRING ‐ HEAVY
314
UPPER SPRING, LIGHT
417
1/2" CAM LOCK (PAIR)
AK‐13‐CS‐105
COUNTER WEIGHT
AK 13 CS 211 AK‐13‐CS‐211
CORN DIVIDER (SHORT) STANDARD CORN DIVIDER (SHORT)
AK‐13‐CS‐310
UHMW LIFT ROLLERS
AK‐13‐CS‐A115
COLOR SORTER SHAKER DRIVE ASSEMBLY (ONLY SOLD AS AN ASSEMBLY)
AK‐13‐CS‐A116
DRIVE SPRING BOARD ASSY (4 PER SET) WITH HARDWARE (ONLY SOLD AS SET OF 4)
AK 14 CS 229 AK‐14‐CS‐229
CONVEYOR CONVEYOR BELT, 64 ZEA SEED CORN, 66" X 64 5/8" BELT 64 ZEA SEED CORN 66" X 64 5/8"
AK‐14‐CS‐236
SPRING ISOLATOR (URETHANE)
AK‐14‐CS‐246
CONVEYOR BELT, 32 ZEA SEED CORN, 34" X 64 5/8"
AK‐14‐CS‐249
CONVEYOR BELT, 48 ZEA SEED CORN 50.178" X 64 5/8"
AK‐14‐CS‐A053
LOWER SPRING ASSY (INCLUDES URETHANE ISOLATOR, SPRING AND 2 CAPTURES)
CSS‐15‐0001
1.5 HP MOTOR, 145T FRAME, 1800 RPM TEFC
CSS‐15‐0002
AK66H DRIVE SHEAVE, BLACKSTAR
CSS‐15‐0003
STEEL SPLIT TAPER BUSHING, DRIVE SHEAVE 1 1/8"
CSS‐15‐0004
SHEAVE LOWER 7/8" BORE, 50HZ ‐ 16‐LANE TO 64 ZEA, 1VL40
CSS‐15‐0005
SHEAVE LOWER 7/8" BORE, 60HZ ‐ 16‐LANE TO 48 ZEA, 1VL34
CSS‐15‐0006
V‐BELT, 50HZ ‐ 16‐LANE TO 48 ZEA, A34
CSS‐15‐0007
V‐BELT, 60HZ ‐ 16‐LANE TO 48 ZEA, A33
CSS‐15‐0008
1/2"‐13 X 1 3/4" HEX BOLT
CSS‐15‐0009
1/2"‐13 X 1 1/2" SHCS 37
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER COMMON PARTS COMMON PARTS
A&K PART #
ITEM DESCRIPTION
CSS‐15‐0010
1/2" FLAT WASHER
CSS‐15‐0011
1 HP MOTOR 1800 RPM 230/460 V 60HZ 56C TEFC 1 HP MOTOR, 1800 RPM 230/460 V 60HZ 56C TEFC
CSS‐15‐0012
GEARBOX, 10:1 CONE DRIVE
CSS‐15‐0013
SPLIT COLLARS 1 7/16" (USED WITH PULLEYS & GEARBOX)
CSS‐15‐0014
UCFT 207 23 BEARING 1 7/16" BORE (USED WITH PULLEYS)
CSS 15 0015 CSS‐15‐0015
3/8" X 1" HEX BOLT (MOTOR TO GEARBOX) 3/8" X 1" HEX BOLT (MOTOR TO GEARBOX)
CSS‐15‐0016
5/16"‐18 HEX NUT (2 PER DIVIDER)
CSS‐15‐0017
7/16"‐14 X 1 3/4" HEX BOLT GRADE 8
CSS‐15‐0018
5/16"‐18 X 1 1/2"HEX BOLT GRADE 8
CSS 15 0019 CSS‐15‐0019
5/16" 5/16"‐18 NYLON INSERT LOCK NUT 18 NYLON INSERT LOCK NUT
CSS‐15‐0020
1/2"‐13 X 4" HEX BOLT GRADE 8
CSS‐15‐0022
1/2"‐13 NYLOCK NUT
CSS‐15‐0023
5/8"‐11 X 4 3/4" HEX BOLT
CSS‐15‐0024
5/8"‐11 X 3 1/2" HEX BOLT
CSS‐15‐0025
5/8"‐11 X 4" HEX CAP BOLT
CSS‐15‐0026
5/8" EXTERNAL TOOTH LOCK WASHER
CSS‐15‐0027
5/8"‐11 JAM NUT
CSS‐15‐0028
5/8"‐11 REGULAR NUT
CSS‐15‐0029
SPRING WELDMENT ASSY ‐ INCLUDES #AK‐13‐CS‐A129, 3/4"‐10 X 5" BOLT, 3/4" NUT AND CUP. (DOES NOT INCLUDE SPRING OR SECURING HARDWARE)
CSS‐15‐0030
3/8" FLAT WASHER
CSS‐15‐0031
3/8" LOCK WASHER
CSS‐15‐0032
3/8"‐16 X 1 3/4" HEX BOLT 38
A&K DEVELOPMENT COMPANY ‐ COLOR SORTER SHAKER FEEDER COMMON PARTS COMMON PARTS
A&K PART #
ITEM DESCRIPTION
CSS‐15‐0033
1/2" LOCK WASHER
CSS‐15‐0034
1/2" X 1 3/4 1/2 X 1 3/4" HEX BOLT (1 7/16 HEX BOLT (1 7/16" BEARING) BEARING)
CSS‐15‐0036
3/8" X 1 1/4" HEX BOLT (PULLEY)
CSS‐15‐0037
3/8" LOCK WASHER (PULLEY)
DB‐13‐A01
SHAKER ARM ASSY ‐ SHAKER ARM WITH BUSHINGS (NO SPRINGS)
DP 14 CS A01 DP‐14‐CS‐A01
DRIVE PULLEY ALUMINUM 64 ZEA (16 LANE) DRIVE PULLEY, ALUMINUM, 64 ZEA (16‐LANE)
DP‐14‐CS‐A03
DRIVE PULLEY, ALUMINUM, 32 ZEA (8‐LANE)
DP‐14‐CS‐A05
DRIVE PULLEY, ALUMINUM, 48 ZEA (12‐LANE)
TP‐14‐CS‐A01
TAIL PULLEY, ALUMINUM, 64 ZEA (16‐LANE)
TP 14 CS A03 TP‐14‐CS‐A03
TAIL TAIL PULLEY, ALUMINUM, 32 ZEA (8‐LANE) PULLEY ALUMINUM 32 ZEA (8 LANE)
TP‐14‐CS‐A04
TAIL PULLEY, ALUMINUM, 48 ZEA (12‐LANE)
39