Copyright © 3 - CONTROLS/INSTRUMENTS
AUXILIARY HYDRAULICS
Standard auxiliary hydraulics Auxiliary hydraulic couplers are located on the left lift arm. 1.
Work ports — 1/2 inch coupler size
2.
Case drain — 3/8 inch coupler size
63106839
1
631068399
2
Use the Proportional Aux “rotary” switch on the right-side control handle to operate the attachment connected to the standard auxiliary hydraulics ports. Refer to your control handle switch configurations for more details. When removing a hydraulic attachment reinstall the coupler covers, if equipped and lock the control in the neutral position. NOTICE: When attachments are removed, it is very important that the pressure is relieved from the system BEFORE the engine is shut down. If the pressure is not relieved, you WILL NOT be able reattach hoses. To relieve pressure, push with the palm of your hand on the attachment hose end on the working arm. When done properly, the fitting will move about 10 mm (0.4 in), relieving the stored pressure.
3 - 28