System CLI Commands Reference 4-83
4.18.4 System SNMP Traps set Command set System SNMP Traps Commands
Sets SNMP trap parameters. Syntax set [cold|cfg|lowcf|port|dos-attack|snmp-auth|snmp-acl|mu-assoc| mu-unassoc|mu-deny-assoc|mu-deny-auth|ap-adopt|ap-unadopt| ap-denied-adopt|ap-radar|rogue-ap|hotspot-mu-state| user-login-failure|interface|admin-passwd-change|dyndns-update| wids-mu|wids-radio|wids-switch|ips] <mode> set cf-thresh <memory_kb> set min-pkt <pkt> set dos-rate-limit <seconds> set rate <rate> <scope> <value> Parameters
set [cold|cfg|lowcf|port|dos-attack|snmp-auth|snmp-acl|mu-assoc|mu-unassoc| mu-deny-assoc|mu-deny-auth|ap-adopt|ap-unadopt|ap-denied-adopt|ap-radar| rogue-ap|hotspot-mu-state|user-login-failure|interface|admin-passwd-change| dyndns-update|wids-mu|wids-radio|wids-switch|ips] <mode> Sets the different SNMP parameters. <mode> can be one of enable or disable. • cold – Configuration changed trap • cfg – Configuration mode trap • lowcf – Low compact flash memory trap • port – Physical port status change trap • dos-attack – Denial of Service (DOS) attack trap • snmp-auth – Authentication failure trap • snmp-acl – SNMP ACL violation trap • mu-assoc – MU associated trap • mu-unassoc – MU un-associated trap • mu-deny-assoc – MU denied association trap • mu-deny-auth – MU authentication denied trap • ap-adop – AP adopted trap • ap-unadop – AP un-adopted trap • ap-denied-adopt – AP denied trap • ap-radar – AP radar trap • rogue-ap – Rogue AP trap • hotspot-mu-state – Hotspot MU change state trap • user-login-failure – User login failure trap • ips – Intrusion Prevention System trap • interface – Interface status change trap