R
AIR SHOWER TOWER FLOW Our Material Handling Air Showers (tower flow) are
open door push button is pressed. Once the user enters
enclosed chambers ideally installed in front of a clean
the air shower cubicle, he/she can start the shower cycle
room to prevent the entry of contaminating particles within
from the inside. The shower cycle is programmable and
the working area. The Clean room air showers are
can be set as per the requirements of the industry. Both
specifically designed for the elimination of surface
the doors of the unit remain locked till the shower cycle
particles from the materials, clothes and skin surfaces of
continues, to prevent the entry of external contaminants
the personnel, prior to entering a clean room or controlled
while the air shower is operational. Once the Tower flow air
environment chamber. Our material handling air showers
shower cycle is completed, the personnel can exit through
find widespread use in semiconductor manufacturing
the exit door. The one-way mode of operation allows the
units, animal research facilities, pharmaceutical
user to enter the air shower cubicle, but he/she cannot exit
production units, micro fabrication industry and in basic
through the entrance door, therefore controlling the traffic
and applied research laboratories.
patterns into and out of the controlled environment chamber. Moreover, the pre-purge function of our modular
WORKING PRINCIPLE
air showers allows the unit to self-clean in a power-on mode. The pre-purge time is also programmable and can
Both the doors of our material handling Tower flow air
be set between 0-3 minutes. Air shower principle is based
showers are interlocked and magnetically operated. They
on subjecting the personnel through adequate velocity of
are permanently energized and open instantly when the
clean air coming through a pre filter assembly.
TECHNOCRACY PVT. LTD.