IRIDRON brand production ranges from colouring earths to pigments, from dyes to pigment pastes, and from acrylic colours, fabric colours for fine arts,and hobby, to renovation and decoration, water paints and varnishes. www.iridron.it
The products of TOMMY ART line match perfectly a selection of chalk-based acrylic colours, to specialty products that allowing the creation of simple and surprising effects that enhance the grains and imperfections of the surface, giving a pleasing effect lived / vintage. www.tommyart.it
In addition to the office products such as inks and stamp pads, wax, sealing wax and glue, HAMBURG has developed and improved theproduction of inks for marking meats and cheeses (CE marked), inks for franking machines and inks for marking different kind of surfaces. www.hamburg.it
With a wide range of products starting from barrels to polish abrasive products, from dyes to dyeing machines, from carbide tools to raw material for buttons, ABRALUX COLORI BEGHE’ intends to present itself to customers as a partner to collaborate on continuous quality improvement. www.abralux.it
Made in Italy
Thanks to his professional knowledge and skills, in 1975 Mr. Morlotti creates the Coverline trademark, establishing a whole organisation operating in the coating market, firstly as the owner and then as a technical director. Over the years, thanks to a constant training of employees and the use of advanced equipment, Coverline has developed an high quality range of products well-known both in the italian and in the international market. Recently, Coverline has joined the Abralux Colori Beghè group, as a trademark and operating structure. According to its new corporate philosophy, Coverline increased the products range thanks to the cooperation and partnership with other companies operating in the same market. The ongoing research and analysis of the raw materials, the daily control on finished products and the production flexibility allow us to assist the customers giving a professional support with a suitable technical service and in-site inspections, and to offer products easy to use for the “DIY” and the hobby. In our new showroom in Lecco, you can find the whole range of products, appreciating the high quality service and the complete commercial offer. Do not hesitate to contact our sales network and technical service for any further question.
This catalogue, its design and content are copyright © Abralux Colori Beghè. The duplication of the present catalogue even partially is strictly forbidden.
Release 1 • Copyright © 2015
Abralux Colori Beghè srl
WALLS UNDERCOATS MICROCID Odorless sanitizing solution for wall’s reclaiming.It prevents the fungi, algae, mould formation’.For interiors/exteriors use before painting.
code
package
MCRCID.1
1 lt
MCRCID.5
5 lt
IDROFIX Trasparent coat acrylic resin based, suitable for interiors/exteriors, with a very good penetration and breathability. It allows to equalize the absorption of support. Overpainted with any paint or water-base coating. code
1 lt
IFIXAC.5
5 lt
IFIXAC.20
20 lt
MICROFOND Transparent microemulsion based on the acrylic resins particularly thin, it allows a strong penetration (into the support), consolidating it in depth. For interiors/exteriors.
4
TECHNICAL DATA Dilution: 1:6-1:8 acqua Density: 1 kg/lt Approx. yield: 6 m2/lt Application:
package
IFIXAC.1
code
TECHNICAL DATA Dilution: ready for use Density: 1 kg/lt Approx. yield: 6 m2/lt Application:
package
MCRFND.5
5 lt
MCRFND.20
20 lt
TECHNICAL DATA Dilution: ready for use Density: 1 kg/lt Approx. yield: 6-8 m2/lt Application:
WALLS UNDERCOATS COVERFIX Acrylic fixative water-based covering. It allows to optimize the use of paint in the further coats. For interiors/exteriors. code
package
COVFIX.4
4 lt
COVFIX.14
14 lt
FONDO UNIVERSALE GRANA GROSSA White uniform finish and layer connection for silicate paints. The special granulometry, given by selected quartz aggregates, provides to the product a rustic look and allows you to hide the cracks. For interiors/exteriors.
code
package
FDUNIV.14
14 lt
ISOLANTE ACRILICO A SOLVENTE Trasparent consolidating fund acrylic resin based in remover, suitable for mineral substrate extremely difficult, feed or whitewashed. The particular size of particles gives to the product a significant penetration into the bottom. For interiors/exteriors.
code
package
PF06703C
5 lt
PF06703E
25 lt
TECHNICAL DATA Dilution: 20-30% with water Density: 1,25 kg/lt Approx. yield: 6 m2/lt Application:
TECHNICAL DATA Dilution: 1:6-1:8 acqua Density: 1 kg/lt Approx. yield: 6 m2/lt Application:
TECHNICAL DATA Dilution: 1:1 nitro solvent Density: 0,9 kg/lt Approx. yield: depending on the support Application:
5
WATER-BASED INTERIORS PAINTS IDROCROM TS Titanium tempera, matt and filtered, perfect for industrial uses and airless also. code
package
IDCROM.14
14 lt
NOELLA Water-based coating, suitable for professional and hobby uses. The freshness is given by its lemon fragrance. code
package
NOELLA.5
5 lt
NOELLA.14
14 lt
BIANCOTIX High covering breathable paint. code
package
BCOTIX.2,5
2,5 lt
BCOTIX.5
5 lt
BCOTIX.14
14 lt
IDROTIX ST Mass consumption breathable paint with an excellent value for money. code
6
package
ITIXST.5
5 lt
ITIXST.14
14 lt
TECHNICAL DATA Dilution: 20-30% with water Density: 1,65 kg/lt Approx. yield: 6-7 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,63 kg/lt Approx. yield: 6-7 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,65 kg/lt Approx. yield: 6-7 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,65 kg/lt Approx. yield: 6-7 m2/lt Application:
WATER-BASED INTERIORS PAINTS IDROTIX BL First-rate breathable paint, with perfect covering and yield. code
package
ITIXBL.2,5
2,5 lt
ITIXBL.5
5 lt
ITIXBL.14
14 lt
COVERMATT Cheap washable/breathable paint, for interiors, with an high hiding power.
code
package
COVMAT.14
14 lt
INTEC Good quality washable paint for interiors, excellent whiteness. code
package
INTEC.5
5 lt
INTEC.14
14 lt
NEW IDROSTAR TOP 3
Super hiding washable paint for interiors, velvety and lemon scented. code
package
IDRTOP.2,5
2,5 lt
IDRTOP.5
5 lt
IDRTOP.14
14 lt
TECHNICAL DATA Dilution: 20-30% with water Density: 1,63 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,50 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,50 kg/lt Approx. yield: 6-7 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,50 kg/lt Approx. yield: 6-8 m2/lt Application:
7
WATER-BASED INTERIORS PAINTS IDROSAN Sanitizing and breathable water-based paint. code
package
IDRSAN.2,5
2,5 lt
IDRSAN.5
5 lt
IDRSAN.14
14 lt
SANIDROL Sanitizing water-based paint that prevents the mould formation on the walls, succesfully. code SADROL.2,5
8
package 2,5 lt
SADROL.5
5 lt
SADROL.14
14 lt
TECHNICAL DATA Dilution: 20-30% with water Density: 1,60 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,60 kg/lt Approx. yield: 6-8 m2/lt Application:
WATER-BASED OUTDOOR PAINTS
NEW
THERMOPAINT
Water-based paint micrometer ceramic based with strong value insulating heat- and sanitizing agents to prevent the formation of organic substances on the substrates. Perfect for facilities or facades with condensation troubles. To get an higher insulated and anti-moisture effect, apply 3 coats to 6 hours apart. code
TECHNICAL DATA Dilution: 20-30% with water Density: 1,65 kg/lt Approx. yield: 6-7 m2/lt Application:
package
TPAINT.5
5 lt
TPAINT.14
14 lt
IDROSTAR Typical washable paint interiors/exteriors, good covering and washable. code
package
IDSTAR.750
750 ml
IDSTAR.2,5
TECHNICAL DATA Dilution: 20-30% with water Density: 1,55 kg/lt Approx. yield: 6-8 m2/lt Application:
2,5 lt
IDSTAR.5
5 lt
IDSTAR.14
14 lt
IDROSTAR EXTRA Perfect washable water-based paint, with high opacity and covering. code
package
IDSTEX.14
14 lt
TECHNICAL DATA Dilution: 20-30% with water Density: 1,53 kg/lt Approx. yield: 7-8 m2/lt Application:
PRODUCT ON DEMAND: min. oder quantty 140 liters
9
WATER-BASED OUTDOOR PAINTS IDROSTAR TINTE BASI Washable water-based paint suitable as a dye for others water-based paints. Available in 10 series of colors. Group 1: ochre yellow, pompeii red, umber, black.* code
package
IDTB1.750-G1
750 ml
IDTB1.5-G1
TECHNICAL DATA Dilution: 20-30% with water Density: 1,53 kg/lt Approx. yield: 6-8 m2/lt Application:
5 lt
*Specify the colour in your order
Gropu 2: yellow lemon, orange, scarlet red, cobalt blue, chromium green, umbria green* code IDTB1.750-G2
package 750 ml
IDTB1.5-G2
5 lt
*Specify the colour in your order
IDROLAC Semi-shiny acrylic water-based varnish, super washable, suitable for clinics and public facilities. code
package
IDRLAC.750
750 ml
IDRLAC.2,5
2,5 lt
IDRLAC.5
5 lt
IDRLAC.14
14 lt
IDROLAC OPACO Matt acrylic water-based varnish, super washable, suitable for clinics and public facilities. code IDLACO.750 IDLACO.2,5
10
TECHNICAL DATA Dilution: 20% with water Density: 1,35 kg/lt Approx. yield: 8-10 m2/lt Application:
package 750 ml 2,5 lt
IDLACO.5
5 lt
IDLACO.14
14 lt
TECHNICAL DATA Dilution: 20% with water Density: 1,35 kg/lt Approx. yield: 8-10 m2/lt Application:
WATER-BASED OUTDOOR PAINTS BETONLINE Satin acrylic water-base paint covering and anti-carbonation for the protection and decorationg of the concrete, bricks and rocks. code
TECHNICAL DATA Dilution: 20% with water Density: 1,35 kg/lt Approx. yield: 8-10 m2/lt Application:
package
BTLINE.5
5 lt
BTLINE.14
14 lt
SILIFARB High breathable water-based paint, suitable for old town and restoration of buildings of special historic value. Equipped with an exceptional adhesion to all mineral substrates. code
package
SILFAR.14
14 lt
IDROQUARZ ST Thin grain traditional quartz paint, strong covering, anchorage and weather condition resistance. Excellent value for money. code
package
IQRZST.5
5 lt
IQRZST.14
14 lt
IDROQUARZ BL Medium grain superior quality quartz acrylic water-based paint, good covering and filling power, high alkali and at weather conditions resistance’. code
package
IQRZBL.5
5 lt
IQRZBL.14
14 lt
TECHNICAL DATA Dilution: 20% with water Density: 1,60 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,50 kg/lt Approx. yield: 4-5 m2/lt Application:
TECHNICAL DATA Dilution: 20-30% with water Density: 1,50kg/lt Approx. yield: 4-5 m2/lt Application:
11
WATER-BASED VARNISHES IDROLUX High quality acrylic water-based varnishes, odorless, brilliant. for interiors/exteriors. After appropriate preparation, it’s suitable for woodstains finishing touch and substrate concrete, metal. code
package
IDRLUX.750
750 ml
IDRLUX.2,5
2,5 lt
IDRLUX.5
5 lt
IDRLUX.14
14 lt
IDROSATIN High quality acrylic water-based varnish, odorless, satin. It’s suitable for metal, woodstains finishing touch and substrate concrete, for interiors/exteriors. code
package
IDSATN.750
750 ml
IDSATN.2,5
5 lt
IDSATN.14
14 lt
IDROMATT High quality acrylic water-based varnish, odorless, matt. It’s suitable for metal, woodstains finishing touch and substrate concrete, for interiors/exteriors.
12
TECHNICAL DATA Dilution: 10% with water Density: 1,22 kg/lt Approx. yield: 8-10 m2/lt Application:
2,5 lt
IDSATN.5
code
package
IDRMAT.750
750 ml
IDRMAT.2,5
TECHNICAL DATA Dilution: 10% with water Density: 1,22 kg/lt Approx. yield: 8-10 m2/lt Application:
2,5 lt
IDRMAT.5
5 lt
IDRMAT.14
14 lt
TECHNICAL DATA Dilution: 10% with water Density: 1,22 kg/lt Approx. yield: 8-10 m2/lt Application:
WATER-BASED VARNISHES PROTETTIVO ACRILICO ALL’ ACQUA LUCIDO Traditional glossy protective product for vertical surfaces as finished concrete, water-based paints, coverings and general mineral supports. Suitable for interiors/exteriors. Not walkable. code
package
PRACRL.750
750 ml
PRACRL.2,5
2,5 lt
PRACRL.5
5 lt
PRACRL.14
14 lt
PROTETTIVO ACRILICO ALL’ ACQUA OPACO Traditional matt protective product for vertical surfaces as finished concrete, water-based paints, coverings and general mineral supports. Suitable for interiors/exteriors. Not walkable. code
package
PRACRO.750
750 ml
PRACRO.2,5
TECHNICAL DATA Dilution: 50-100% with water Density: 0,98 kg/lt Approx. yield: 10 m2/lt Application:
TECHNICAL DATA Dilution: 50-100% with water Density: 0,98 kg/lt Approx. yield: 10 m2/lt Application:
2,5 lt
PRACRO.5
5 lt
PRACRO.14
14 lt
13
SILOXANE PRODUCTS IDROSIL Consolidating and anti-salt water-based microemulsion, perfect as undercoating for siloxane cycles. code
package
IDRSIL.5
5 lt
IDRSIL.20
20 lt
ISOFARB D40 Condensed solvent-based fixative for siloxane cycles. Strong penetration and good anti-salt effect. code
5 lt
ISOFAR.25
25 lt
IDROSTAR SILOSSANICA Water-based acryl-siloxane paint for interiors/exteriors, with strong breathable and waterproof power, Suitable for the restoration of building with special historic value.
IDSILO.14
14
TECHNICAL DATA Dilution: 1:1 nitrocellulose thinner Density: 0,8 kg/lt Approx. yield: 6-8 m2/kg Application:
package
ISOFAR.5
code
TECHNICAL DATA Dilution: ready for use Density: 1 kg/lt Approx. yield: 8 m2/lt Application:
package 14 lt
TECHNICAL DATA Dilution: 20-30% with water Density: 1,60 kg/lt Approx. yield: 3 m2/kg Application:
SILOXANE PRODUCTS IDROSTAR SILOSSANICA ST Cheap water-based acryl-siloxane paint for interiors/exteriors, with good breathable and waterproof power. code IDSIST.14
TECHNICAL DATA Dilution: 20-30% with water Density: 1,60 kg/lt Approx. yield: 3 m2/kg Application:
package 14 lt
EUROSIL Thickness acryl-siloxane covering for external. Granulometry: 1,2 mm thin type (F) – 1,5 mm medium type (M).
code
package
EURSIL.25.F
25 kg
EURSIL.25.M
25 kg
EUROSIL ST Cheap thickness acryl-siloxane covering for esternal, permeable to the steam. Granulometry: 1,2 mm thin type (F) – 1,5 mm medium type (M). code
package
ESILST.25.F
25 kg
ESILST.25.M
25 kg
TECHNICAL DATA Dilution: ready for use Approx. thin yield : 2 m2/kg Approx. medium yield : 3 m2/kg Application:
TECHNICAL DATA Dilution: ready for use Approx. thin yield : 2 m2/kg Approx. medium yield : 3 m2/kg Application:
15
PLASTERS GRAFFIATO ACRILICO Plastic coating strongly waterproof with striped effect, for external, Grained available: fine (GRFACR.25.F), medium (GRFACR.25.M) 路 gros (GRFACR.25.G). code
package
GRFACR.25.F
25 kg
GRFACR.25.M
25 kg
GRFACR.25.G
25 kg
SVIZZERO ACRILICO Plastic coating with unfinished building effect, for external. Granulometry: 1,2 mm fine (SVZACR.25.F) 路 1,5 mm medium (SVZACR.25.M) 路 2,5 mm tipo gros (SVZACR.25.G) type. code
package
SVZACR.25.F
25 kg
SVZACR.25.M
25 kg
SVZACR.25.G
25 kg
RUSTICO FINE VENEZIA Fine synthetic coating with a stabilitura effect, for external. code
package
RUSTVE.25
25 kg
TECHNICAL DATA Dilution: ready for use Approx. thin yield : 2,8 m2/kg Approx. medium yield : 3 m2/kg Approx. thick yield : 3,5 m2/kg Application:
TECHNICAL DATA Dilution: ready for use Approx. thin yield : 2 m2/kg Approx. medium yield : 3 m2/kg Approx. thick yield : 4,5 m2/kg Application:
TECHNICAL DATA Dilution: ready for use Approx. yield: 1,8 m2/kg Application:
PRODUCT ON DEMAND: min. oder quantty 250 kg.
GRANIGLIATO LAMATO Depth coating natural marble chips based, for internal/external
code
package
GRNLAM.20
20 kg
PRODUCT ON DEMAND: min. oder quantty 260 kg. 16
TECHNICAL DATA Dilution: ready for use Approx. yield: 3-3,5 m2/kg Application:
PLASTERS LAMATO CERAMIZZATO Depth coating coloured quartz granules, for internal/external.
code
package
LAMCER.20
20 kg
TECHNICAL DATA Dilution: ready for use Approx. yield: 3 m2/kg Application:
PRODUCT ON DEMAND: min. oder quantty 260 kg.
BUCCIATO TORINO Depth plastic continuos coating with textured effect, for internal. To get a finer-grained effect, dilute with water. code
package
BUCTOR.14
14 lt
TECHNICAL DATA Dilution: ready for use Specific weight: 1,5 kg/lt Approx. yield: 0,5 lt/m2 Application: alveolar roll
PRODUCT ON DEMAND: min. oder quantty 84 liters
BUCCIATO ESTERNO Depth plastic continuos coating with textured effect, for external. To get a finer-grained effect, dilute with water. code
package
BUCEXT.14
14 lt
TECHNICAL DATA Dilution: ready for use Specific weight: 1,7 kg/lt Approx. yield: 0,8 lt/m2 Application: alveolar roll
PRODUCT ON DEMAND: min. oder quantty 84 liters
RUSTICONE Typical “wash perle” effect with high depth, for internal/external.
code RUSTIC.25
TECHNICAL DATA Dilution: ready for use Specific weight: 1,8 kg/lt Approx. yield: 2,8-3 kg/m2 Application: alveolar roll
package 25 kg
PPRODUCT ON DEMAND: min. oder quantty 250 kg. 17
LEVELLING COATING - ADHESIVES RASATURA PER CAPPOTTO Levelling/adhevise in the mass to be admixtured with concrete (grey or white) at 30%. Suitable for panel gluing (EPS, cork, glass wool) and for drowning the fiberglass both.
code
package
RASCAP.25
25 kg
MINERAL COVER Powder levelling/adhevise concreted for insulation system, available in fine and gros granulometry. Suitable for panel gluing (EPS, cork, glass wool) and for drowning the fiberglass both. It could be levelled with a float. in the gros granulometry.
code
package
MINCOV.25.F
25 kg
MINCOV.25.G
25 kg
KAPPACEM FINE BIANCO Powder levelling concreted with a stabilitura effect, with calibrated granulometry easy to be worked. Suitable to be varnished with any wall paint. For internal/external.
18
code
package
KAPCEM.25
25 kg
TECHNICAL DATA Levelling coating yield: 2 kg/m2 Insulating coating yield: 6-8 kg/m2 Application:
TECHNICAL DATA Dilution: 25% with water Levelling coating yield: 2 kg/m2 Insulating coating yield: 6-8 kg/m2 Application:
TECHNICAL DATA Dilution: 25% with water Approx. yield: 2 kg/m2 Application:
LIME-BASED PRODUCTS REVIVAL PITTURA Lime-based paint aged after and filtered, for internal/external. Excellent breathability, bacterical agents resistance and colorimetric rendering index. Percentage of dilution depending on the type of finishing. package
code REVPIT.14
14 lt
REVIVAL STUCCO Decorative eco-friendly covering lime-based refined with “venetian stucco” effect for inner prestigious finishes.
REVSTU.5
5 kg
REVSTU.25
25 kg
MARMORINO Natural finishing lime and marble based, for internal/external. Extremely breathability and good bacterical agents resistance. Ideal solution for historical buildings.
code
package
MARMOR.25
25 kg
STABILIT Natural finishing lime-based with stabilitura effect. For internal/external, suitable for old towns to combine the ancient look to the easy application of modern product.
STBLIT.25
TECHNICAL DATA Dilution: ready for use Approx. yield: 300-500 g/m2 Application: stainless steel float
package
code
code
TECHNICAL DATA Dilution: 20-50% with water Density: 1,50 kg/lt Approx. yield: 6-7 m2/lt Application:
TECHNICAL DATA Dilution: ready for use Approx. yield: 1 kg/m2 Application: stainless steel float
TECHNICAL DATA Dilution: ready for use Approx. yield: 1,5-2 kg/m2 for coat Application: stainless steel float
package 25 kg
PRODUCT ON DEMAND: min. oder quantty 150 kg. 19
LIME-BASED PRODUCTS ID PASTA Natural finishing lime-based with unfinished effect, for internal/ external. Granolumetry: 1,2 mm fine (F) · 1,5 mm medium (M) type. code
package
IDPAST.25.F
25 kg
IDPAST.25.F
25 kg
TECHNICAL DATA Dilution: ready for use Approx. thin yield : 2 kg/m2 Approx. medium yield : 3 kg/m2 Application: stainless steel float
PRODUCT ON DEMAND: min. oder quantty 150 kg.
CERA NATURALE PER STUCCO It’s precious natural waxes based , essential as protection of revival stucco and marmorino in the inner applications. In coloured versions, it allows to get attractive colour effect. It gives to the support brilliance and washable. Colours available: natural (AS010N.500), white (AS020B.500), amber (AS035A.500), dark (AS035A.500). code
package
AS010N.500
500 ml
AS020B.500
500 ml
AS030S.500
500 ml
AS035A.500
500 ml
POLIFINISH GEL 205 Colourless satin finishing for marmorino and stucco, for internal/external. Natural waxes based and acrylic resins. It makes the surface waterproof and washable without compromising the permeability. code POLGEL.1 POLGEL.2,5
20
package 1 lt 2,5 lt
TECHNICAL DATA Dilution: ready for use Approx. yield: 30-50 g/m2 Application:
TECHNICAL DATA Dilution: ready for use Specific weight: 1 kg/lt Approx. yield: 0,200 lt/m2 Application: steel float
VELATURA SILOSSANICA Matt decorative finish with antiquing effect. Suitable for interior/exterior. Appropriate primer coat: idrostar silossanica (p. 14) or Silifarb (p. 11). code VELSIL.2,5
package 2,5 lt
VELATURA A CERA Satin decorative finish with antiquing effect for interiors. Appropriate primer coat: Idrostar (p. 9). code
package
VELCER.2,5
2,5 lt
RIFLESSI Synthetic micro-stucco ready to use with metallic effect for interiors, silver (RIFLESS.2,5.A) and gold (RIFLESS.2,5.O) basic colors. To be coloured with special toners (p. 23). Application in 2 coats by plastic smoothing tool on the Idrostar coat (p. 9) in a finish with the same colour. code
package
RIFLESS.2,5.A
2,5 lt
RIFLESS.2,5.O
2,5 lt
FINIVEL Multi-colours decorative finish for interiors available in white or white/black to be coloured with the appropriate toners (p. 23). Preparation of the surface with Covermatt (p. 7). Get in contact with our technical office for any information concerning the exterior use. code FINVEL.5
TECHNICAL DATA Dilution: 30% with water Density: 1 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: 30% with water Density: 1 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: with water (if required) Density: 1,1 kg/lt Approx. yield: 0,2 lt/m2 Application:
TECHNICAL DATA Dilution: with water (if required) Density: 1 kg/lt Approx. yield: 0,150 lt/m2 Application:
package 5 lt
21
FINIVEL METAL Metallic decorative finish ready for use, for internal, available in gold, silver, copper colours. Preparation of the surface with Covermatt (p. 7). code
package
FINMET.2,5
2,5 lt
TECHNICAL DATA Dilution: with water (if required) Density: 1 kg/lt Approx. yield: 0,150 lt/m2 Application:
*Specify the colour in your order
NEW
FINIVEL IRI
Iridescent/metallic decoration for internal, available in 20 colours ready for use. Application of one/two covers of Fondo Iri. Attention: the colour rendering changes depending on the layer colour. code FINIRI.2,5
TECHNICAL DATA Dilution: with water (if required) Density: 1 kg/lt Approx. yield: 0,150 lt/m2 Application:
package 2,5 lt
*Specify the colour
FONDO IRI Coloured underpainting in 6 colours, essential for Finivel iri. code FONIRI.2,5
package 2,5 lt
EFFETTO MOVIMENTO Semi-transparent finishing to get different decorative effects depending on the method of application. May coloured with appropriate toner (p. 23).
22
TECHNICAL DATA Dilution: 20-30% with water Density: 1,65 kg/lt Approx. yield: 6-7 m2/lt Application:
code
package
EFFMOV.2,5
2,5 lt
TECHNICAL DATA Dilution: ready for use Density: 1 kg/lt Approx. yield: 0,150 lt/m2 Application: deco roll
EFFETTO MOVIMENTO INTERFERENZIALE Semi-transparent finishing with pearl effect to get different decorative effects depending on the method of application. Colours available: gold, green, purple, blue, orange. code
package
MOVINT.2,5
2,5 lt
FILE’ Decorative sandblast finishing with shantung effect, to be painted with special toners. Ready for use in: silver (FILE.2,5.AR), gold (FILE.2,5.OR), metal inter gold (FILE.2,5.IN), metal copper (FILE.2,5.BR) colours. code
package
FILE.2,5.AR
2,5 lt
FILE.2,5.OR
2,5 lt
FILE.2,5.IN
2,5 lt
FILE.2,5.BR
2,5 lt
FILE’ MICRO Decorative velvet effect finishing with anti-condensation property, to be painted with special torers. Basic colours: silver (FILEMC.2,5.A) · gold (FILEMC.2,5.O). Application in 2 coats by plastic smoothing tool or 1 coat by paintbrush. code
package
FILEMC.2,5.A
2,5 lt
FILEMC.2,5.O
2,5 lt
TONER Coloured dose in 50 ml for FINIVEL (pag. 21), FILE’ and FILE’ MICRO. Available in 28 coloures ready for use. code TONER.50
TECHNICAL DATA Dilution: ready for use Density: 1 kg/lt Approx. yield: 5-10 m2/lt Application: deco roll
TECHNICAL DATA Dilution: with water (if required) Density: 1,2 kg/lt Approx. yield: 6-8 m2/lt Application:
TECHNICAL DATA Dilution: with water (if required) Density: 1,1 kg/lt Approx. yield: 10-12 m2/lt for coat Application:
TECHNICAL DATA 1 toner for 2,5 lt of product
package 50 ml
23
STUCCO VENEZIANO Decorative coating with stucco veneziano effect self-shining. Application in 3 coats. code
package
STUCVE.1
1 kg
STUCVE.5
5 kg
STUCVE.25
25 kg
POLIFINISH GEL METAL Metallic finishing natural waxes based and acrylic results. It makes the surface waterproof and washable without compromising the permeability.
code POLMET.1 POLMET.2,5
1 lt 2,5 lt
Iridescent metallic finishing natural waxes based and acrylic results. It makes the surface waterproof and washable without compromising the permeability. Available in gold, blue, green, purple, orange colours.
POLINT.1 POLINT.2,5
TECHNICAL DATA Dilution: Ready for use Density: 1 kg/lt Approx. yield: 0,200 lt/m2 Application: steel float
package 1 lt 2,5 lt
GLITTER XS Silver (C1XS...) and gold (C2XS...) floating glitter to be used in paints and decorative products directly.
24
TECHNICAL DATA Dilution: Ready for use Density: 1 kg/lt Approx. yield: 0,200 lt/m2 Application: steel float
package
POLIFINISH GEL METAL INTER
code
TECHNICAL DATA Dilution: Ready for use Approx. yield: 0,8 kg/m2 Application: stainless steel polished float
code
package
C1XS06.40
40 gr
C1XS06.120
120 gr
C2XS06.40
40 gr
C2XS06.120
120 gr
TECHNICAL DATA yield: 1-2% in weight
DECOSOL Powder premixed cementitous fine-grained, for continuous flooring. Available in 20 colours obtaining from special coloured dosette. Application in 2 or 3 coats depending on the surface.
code
package
DECOSL.10
10 kg
DECOSOL DOSETTE Premeasured coloured pasta for 10 kg of Decosol. code DECODO.200
package
Water-based polyurethane finishing, single-component, polish and matt, or Decosol, mineral supports and wood. Application in 2 coats. The performance depending o the surface. DECOPL.5
TECHNICAL DATA Dilution: fino al 10% with water Specific weight: 1 kg/lt Approx. yield: 0,500 lt/m2 Application:
200 gr
DECOPOL
code
TECHNICAL DATA Dilution: 25-30% with water Apparent density: 1,8 kg/lt Approx. yield: 1 kg/m2 for coat Application: steel float
TECHNICAL DATA Dilution: fino al 10% with water Specific weight: 1 kg/lt Approx. yield: 0,500 lt/m2 Application:
package 5 lt
DECOWAX Polyurethane protective wax for Decosol surfaces. Minimun application 2 coats. code
package
DECOWX.5
5 lt
TECHNICAL DATA Dilution: fino al 10% with water Density: 1 kg/lt Approx. yield: 0,500 lt/m2 Application:
25
POWDER PIGMENTS Oxides, colouring earths and pigments for constructions have been selected for their characteristics of lightfastness and stability, resistance to adverse weather conditions, water and alkali. Thus, this is the perfect product for colouring of concrete, lime and mixture of derived substances, plaster, pre-cast concrete and pavements. Into the mixture to be coloured, disperse the pigment up to get the required tone. Stir the mixture before and after the addition of water. 2044 • T
2062 • T
4004 • T
4006 • T
5002 • T
8006 • T
8008 • T
Natural Sienna Earth
Burnt Sienna Earth
Pompei Red
Airy Red Earth
Lime Violet
Dark Burnt Umber Earth
Natural Umber Earth
8028 • T
9004 • T
2032 • O
2050 • O
4020 • O
4022 • O
4024 • O
Umbria’s Earth (Brunum)
Extra Vite Black
Natural Yellow Oxide
Gold Ochre Yellow
Morellone Iron Oxide
Malaga Red Iron Oxide
Synthetic Red Iron Oxide
6034 • E
7014 • O
7016 • O
8012 • O
8020 • O
8022 • O
9018 • O
Cement Blue F
Green Chrome Oxide T
Light Green Chrome
Light Brown Oxide
Sinthetic Brown Iron Oxide
Brown Iron Oxide C
Synthetic Black Iron Oxide
code
26
package
pcs/pack
Colouring Earths
1 kg
12
Colouring Earths
25 kg
1
code
package
pcs/pack
Oxides
1 kg
12
Oxides
25 kg
1
code
package
pcs/pack
6034 • E
1 kg
12
6034 • E
25 kg
1
POWDER PIGMENTS STONECOLOR Stonecolor is a series of earth colors produced starting from vulcanite vulsiva of the pleistocene period. This effusive magmatic mineral, free crystalline silica, possesses unique physical and chemical characteristics. In particular, the high light fastness, the alkali and the adverse weather conditions resistance, the breathability and the incombustibility make it the ideal product for the coloring of cementitious materials and coating, for both interior and exterior. The warm and natural tones allow the coloring of products for restoration, the bio-construction and decoration. ST20
ST24
ST40
ST46
ST82 “CAVA di LAPILLO”
Onyx Yellow
Ochre
code
Natural Red
Alabaster Brown
Veneto Red
package
pcs/pack
STONECOLOR
1 kg
12
STONECOLOR
25 kg
1
T = COLOURING EARTH O = POWDER OXIDES C = PIGMENTS FOR HOUSING
COVERING: COVERING SEMI-COVERING FASTNESS TO LIGHT: EXCELLENT RESISTENZA agli ALCALI: EXCELLENT
Despite their accuracy, the shades reported in this catalogue have an indicative value only.
27
WATER-BASED COLOURING IRIDRON
Thanks to their high covering level, IRIDRON concentrated liquid dyes allow an easy and cheap coloration of varnished water-based products, for internal. Available in 50, 100, 250 ml sizes and in bottle with the 500 ml cap dispenser for professional use. Suitable to colour: internal water-based paint, tempera paint, water-based varnishes, stucco, water-based varnishing coating. After shaking the bottle, add the dye little by little, mixing up to get the required tone. The maximum dose depends on the type product to be coloured; for higher dose (more than 10%), we suggest a previous compatibilty test. Moreover, the coating coloured products are modified. A combination of different colours enables numerous customized nuances .The obtainable tones by Iridron dyes may be vary depending on the surfaces to be painted.
0 Ochre Yellow
1 Lemon Yellow
1A Chrome Yellow
2 Gold Yellow
3 Orange
4 High Red
12 Ochre Red
5 Bordeaux
15 Violet
9 Sky Blue
6 Olive Green
7 Grass Green
8 Emerald Green
11 Brown
10 Black
code
package
pcs/pack 12 - 24
IRIDRON.50
Plastic container 50 ml
IRIDRON.100
Plastic container 100 ml
12
IRIDRON.250
Plastic container 250 ml
6
IRIDRON.500
Flask Container 500 ml
1
Despite their accuracy, the shades reported in this catalogue have an indicative value only.
UNIVERSAL COLOURING UNICROM HR
The universal liquid dyes UNICROM HR use organic and inorganic selected pigments for their light resistance and clear tone. The process, using a 3 cylinder kneading machine, allows to obtain a high yield and a good covering power. The lightfastness make the ideal product for the coloration of withpainting water-based and solvent systems, or internal and external both. Available in 50, 250 ml sizes and in bottle with 50 ml cap dispenser for professional use. Suitable to dye: water-base paint, water-based varnishes, mineral-based products, stucco, varnished water-based solvent-based products . After shaking the bottle, add the dye little by little, mixing up to get the required tone. The maximum dose depends on the type product to be coloured; for higher dose (more than 10%), we suggest a previous compatibilty test. Indeed, the coating coloured products are modified. A combination of different colours enables numerous customized nuances. The obtainable tones by Unicrom HR dyes may be vary depending on the surfaces to be painted.
100 Oxyde Yellow
102 LemonYellow
104 Medium Yellow
106 Corn Yellow
Serie 1
Serie 3
Serie 3
Serie 2
108 Orange
120 Oxyde Red
110 High Red
126 Magenta
Serie 3
Serie 1
Serie 2
Serie 3
122 Violet
114 Bluw
112 Green
118 Brown
Serie 3
Serie 2
Serie 2
Serie 1
116 Black
124 White
Serie 1
Serie 1
code Serie 1
Serie 2
Serie 3
package Plastic container 50 ml
pcs/pack 12 - 24
Plastic container 250 ml
6
Flask Container 500 ml
1
Plastic container 50 ml
12 - 24
Plastic container 250 ml
6
Flask Container 500 ml
1
Plastic container 50 ml
12 - 24
Plastic container 250 ml
6
Flask Container 500 ml
1
Despite their accuracy, the shades reported in this catalogue have an indicative value only.
TRACKING SYSTEM TRACKING PIGMENTS
Tracking pigments are products by raw selected materials. The high yield allows to obtain good results on each surfaces. The useful bottle and the cap dispenser allow the use with all systems tracking.
package
pcs/pack
4070 Red TR
Flask 800 gr
15
6030 Blue TR
Flask 800 gr
15
7060 Green TR
Flask 800 gr
15
code
ACOTRAX TRACKING WATERS With his yellow-green colouring and a extremely fluorescence, ACOTRAX Giallo Liquido cod.1210 is particularly suitable as tracking for underground water search, for the storages leakage test, tanks, pipes, terraces, and for the leakage of waterproofing test in general. It’s sufficient to dissolve the content of bottles in 5 m/3 of water to get the perfect coloration. Also available in Rosso liquido cod. 1250 and Blu liquido cod. 1270 colours.
30
code
package
pcs/pack
1210 Yellow
Flask 800 ml
15
1250 Red
Flask 800 ml
15
1270 Blue
Flask 800 ml
15
Abralux Colori Beghè srl SEDE LEGALE E OPERATIVA: Via Per Canzo, 24 22030 Castelmarte (CO) ITALY Tel. +39-031-620341 - Fax +39-031-620386 info@abralux.it - www.iridron.it DIVISIONE COVERLINE: Via Tagliamento, 17 23900 Lecco (LC) ITALY Tel. +39-0341-499191 - Fax +39-0341-494540 coverline@abralux.it - www.coverline.it
Made in Italy