Fiat multipla

Page 196

The fuse location (n. 16 to n. 28) is not binding; to replace a blown fuse, refer to the fuse colour that must be the same as the fuse box colour. To reach the fuses: ❒ Raise the oddments tray compartment flap.

To facilitate fuse replacement, use the pliers (C) located near the fuse box.

DASHBOARD AND CONTROLS SAFETY DEVICES CORRECT USE OF THE CAR

The fuse box is located under the oddments tray on the driver’s side.

After use return pliers to their place. IMPORTANT Never turn the ignition key to MAR with a fuse removed; doing so would turn on warning light ¬ and the “fault” would be stored by the airbag control unit. In such an event, go to Fiat Dealership to reset the fault stored on the airbag control unit.

WARNING LIGHTS AND MESSAGES

FUSE BOX

The group of fuses marked with letter (B) contains spare filaments.

IN AN EMERGENCY

To locate the fuse, refer to the tables on the following pages.

❒ Take out the inner cover, rotating the two knobs (A).

CAR TECHNICAL SPECIFICATIONS MAINTENANCE

To replace these fuses, first of all remove the grid using a screwdriver. Replace the blown fuse and refit the plastic grid.

The numbers indicating the electrical components corresponding to each fuse can be seen on the inside of the flap inner wall.

INDEX

Certain fuses are protected by a plastic grid.

F0E0694m

195


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.