ENGINE OIL SPECIFICATIONS
SPECIFICATIONS AND INFORMATION
ENGINE OIL SPECIFICATIONS
• John Deere TORQ-GARD SUPREME or John Deere PLUS-50
SAE 30
SAE10W-30
The following oil is preferred AFTER first 100 hours of break-in oil is used:
SAE 5W-30
Use the appropriate oil viscosity based on the expected air temperature range during the period between recommended oil changes. Operating outside of these recommended oil air temperature ranges may cause premature engine failure.
SAE 15W-40
4-CYCLE DIESEL ENGINE OIL— NORTH AMERICA
Other oils may be used if they meet one of the following: • API Service Classification CE • API Service Classification CD • CCMC Specification D5 • CCMC Specification D4
PREFERRED AIR TEMPERATURE
M58275
If John Deere TORQ-GARD SUPREME or John Deere PLUS-50 engine oil and a John Deere oil filter are used after first 100 hours, the oil and filter service interval may be extended by 50%. If diesel fuel exceeding 0.5% sulfur content is used, reduce the service interval for engine oil and filter by 50%. Oils meeting Military Specification MIL-L-46167B may be used as arctic oils.
2 - 12
11/22/00
