Technical tips Starting control When starting the engine, the timing is set to 5° BTDC until the crankshaft speed maintains 600 r/min for two seconds or longer.
3 9
2
4
1 5 7
6
8 S62Y1350
1 2 3 4 5 6
7 Starting signal (5° BTDC) for cylinders #1 and #4 8 Starting signal (5° BTDC) for cylinders #2 and #3 9 Rotating direction
Cylinder identification protrusion Protrusion for cylinders #1 and #4 Pulser coil Protrusion for cylinders #2 and #3 Pulser coil signal Cylinder identification signal
Warm-up control After the starting control is completed, the control transfers to the ignition timing based on the warmup map for three minutes. From the time the three-minute warm-up control has been completed, the control transfers to the normal map.
3 4 1 5
5 0 1
2
3
4
2
1 2 3 4 5
5
6 S62Y1360
Ignition timing (BTDC°) Engine speed (× 1,000 r/min) Warm-up map Acceleration map Normal map
62Y5A11
1-18
1 2 3 4 5 6 7 8 9