INSP ADJ
CONTROL SYSTEM
E Remote control shift cable adjustment (E models) 1. Check: 9 Shift cable Damage → Replace. Incorrect shift lever position/poor shifting → Adjust.
2. Adjust: 9 Remote control shift cable Adjusting steps: 8 Move the remote control lever so the shift lever (engine side) is in the neutral position. 8 Loosen the locknut 1. 8 Remove the clip and then remove the cable adjuster 2 (along with the remote control throttle cable 3) from the throttle control cam 4. 8 Set the remote control lever to the neutral position. 8 Turn the cable adjuster so it aligns with the pin on the throttle control cam. Then, reinstall the cable adjuster (along with the remote control shift cable) onto the throttle control cam.
w The cable adjuster must be screwed in at least 8 mm (0.31 in). 8 Install the clip and tighten the locknut. 8 Move the remote control lever to the forward, neutral, and reverse positions and make sure it shifts smoothly and correctly. Also, make sure the shift lever (engine side) is in the same position as the remote control lever (e.g., both in the neutral position). If the shifting operation is unsmooth or incorrect, repeat the above procedure. NOTE: If the remote control shift cable cannot be properly adjusted at the engine side, make adjustments at the remote control side. 3-6