Electrical Schematics
100 YRM 1100
Figure 42. Cummins Diesel/LPG Engine Relays Starting With S/N 01647 (C876) and 01588 (C877) and Up (Located Left of Fuse Panel) NOTE: Start aid (Perkins only), Pressure signal (ECH only), and Flasher (Optional).
Label Replacement 2. Remove paper from back of label. Do not touch adhesive surface.
WARNING Labels that have WARNINGS or CAUTIONS must be replaced if they are damaged. If a mast of a different size or an accessory carriage is installed, the capacity rating can change. Changes in the kind of drive tires can change the capacity rating. See a dealer for Yale lift trucks for a replacement nameplate. The nameplate information is a safety item and must be correct for the equipment and configuration of the lift truck.
3. Carefully hold label in correct position above surface. Label cannot be moved after it touches surface. Put label on surface. Make sure all air is removed from under label and corners and edges are tight. See Parts Manual for correct location and part number.
1. Make sure surface is dry and free of oil or grease. Do not use solvent on new paint. Clean the surface of old paint using cleaning solvent.
Electrical Schematics See the section Diagrams 8000 YRM 1103.
24