1. 9. 1992
21. Engine
1. 1. 1994
Model
6000-- 8750
Code
211
Page
3
134 mm
272 mm 6---7 mm
4
2
3
1
Camshaft oversize bearing bushings for 420---engines. Numbering begins from the front end of the engine.
Order no
Hole diameter
1. 8363 24661 2. 8368 52460 3. 8368 52460 4. 8368 52461
56,02...56,05 55,42...55,45 55,42...55,45 55,64...55,67
266 mm 272 mm
134 mm
6 ---7 mm
5
4
3
2
Camshaft oversize bearing bushings for 620/634 engines. Numbering begins from the front end of the engine.
1
Order no
Hole diameter
1. 8363 24661 2. 8368 52466 3. 8368 52460 4. 8368 52466 5. 8368 52467
56,02...56,05 55,62...55,65 55,42...55,45 55,62...55,65 55,84...55,87
F. Fitting plug at camshaft rear end 1. Clean the seat for the plug. 2. Apply sealing compound to the contact surface of the plug
The camshaft rear end plug is replaced with plug 8363 24391 and o---ring 6146 05125 after machining. 3. Drive in the plug with fitting drift 9025 87400. Note! Do not drive in the plug too far because it will affect the camshaft end float.
45