8200 SERIES TRACTORS
Splitting - Chassis reinforcements
2F01.5
B . Installing and adjusting the reinforcements (Heavy Duty gearbox) (Fig. 2 - 3) Note: See “Danger” at § A. - Pre-assemble crossbeams (6) with screws and washers (1) and (7), spacers (4) and the nut, - Coat the threads of screws (2) and (3) and nut (5) with Loctite 270. Torque the screws as follows: . Screw (2): 630 - 840 Nm . Screw (3): 790 - 1050 Nm - Pre-tighten screw (8) to 20 Nm - Position the tensioner screws (9) in contact with curved washers (10) and loosen so as to obtain a pressure equivalent to a torque of 100 Nm on housing (19), - Torque blocking screw (11) to 36 - 46 Nm - Final torque screw (8) to 240 - 320 Nm.
Issue 1
May 2001