Perkins/GTA2520 engine separation Operations under the cab
CAUTION: If the engine is still hot, allow it to cool.
NOTE: To work on heating hoses, it is not necessary to drain the engine block cooling circuit. 14. Pinch out each heating hose using a clamp fitted with plastic jaws (Fig. 5).
Operations on the engine 15. If necessary, disconnect the connector (1) of the main wiring harness (Fig. 6). 16. Separate the compressor, the condenser and the filter from their respective holders, and remove them without breaking the circuit (see chapter 12).
Fig. 5
NOTE: Proceed carefully.
Operations at the front of the cab 17. Disconnect the connectors (2) on the left-hand face of the bulkhead (Fig. 6).
2B11.6
¤ H
Massey Ferguson 6400 - Issue 4.a