Splitting the Sisu engine/GTA1030 Final operations Final operations are not especially difficult. They therefore will be carried out in the reverse order of the preliminary operations. However, the following operations need to be performed during refitting: - if necessary, tighten the cab front silent block screws at the require tightening torque (see chapter 12); - top up the level of coolant, to the maximum level marked on the expansion tank (Fig. 14); - test: - the air conditioning system (if fitted - see chapter 12); - the suspended front axle (if fitted, see chapter 8), - all mechanical, hydraulic, electrical and electronic functions concerned by servicing; - check the tightness: - of the hydraulic unions, - of water hoses, - of the bleed screw on control unit of suspended front axle (if fitted).
Massey Ferguson 6400 - Issue 4.a
¤ H
MAX MIN
MA-02-05124A
Fig. 14
2B21.11