Standard
Product code Version
10334184 000 WN 4121 C
Installations for pistons and piston nuts by hydraulic cylinders 1. Application and purpose This Liebherr standard applies only to hydraulic cylinders, and in particular to the mounting of pistons and piston nuts on piston rods from a thread diameter of M42 and greater. This standard describes the tightening procedure with turning distance and angle. For threads with diameters smaller than M42, the applicable tightening torque is indicated in the drawings. The values in the drawings are always binding.
2. Requirements / description of procedure For the valid torque value number, refer to the drawing. The standard may not be adopted or transferred to apparently similar geometries. Use this number to find the applicable turning distance and angle in the torque table (see item 4). The torque values have been determined empirically and are subject to changes. This standard differentiates between two tightening procedures, which are identified with 3-digit and 4-digit numbers respectively (see chapters 2.1 and 2.2).
1.22.1 1/7