Service Manual
Maintenance and inspection schedule A 934 C Litronic from 28 016
Maintenance and inspection schedule 1
A 934 C Litronic from 28 016 Type 1006 Customer:
Serial no.:
Date:
Machine type:
Operating hours:
Caution! Careful maintenance is only possible, if the machine is clean. Especially visual inspections, e.g. for cracks, can be carried out properly only with a machine that has been cleaned recently. Therefore clean the machine thoroughly before starting any maintenance work (see also chapter "Safe maintenance of machine", subchapters "Cleaning" and "Crack inspection").
Note! The daily maintenance tasks of the machine operator include a functional test of the brakes (slewing gear brake, working brake, parking brake), steering, electrical and hydraulic systems. Also to be carried out is a daily visual inspection of the motor, hydraulic system, gearbox and axles for leakage.
Maintenance/inspection at operating hours
WORK TO BE CARRIED OUT A 934 C Litronic, type 1006 by maintenance personnel (machine operator) Initial and single interval Repeat interval Annually, at the start of the cold season when required
with authorised specialist technician Initial and single interval Repeat interval
DIESEL ENGINE Check the oil level Visual inspection (leakage, dirt, damage) Check oil level in pump distributor gear Replace gear oil in pump distribution gear Check flap of diesel engine brake 1)
Change diesel engine oil (at least once a year) Change oil filter insert (at least once a year) Check batteries and cable connections
3.17.1 copyright by
MJFCIFSS