G GENERAL
B1830, B2230, B2530, B3030, WSM
Replacing Transmission Oil Filter Cartridge
• • 1. 2. 3. 4. 5.
■ •
CAUTION Be sure to stop the engine before changing the oil filters. Allow engine to cool down sufficiently, oil can be hot and can burn. Drain the transmission fluid. Remove the both oil filter cartridges by using a filter wrench. Apply a slight coat of oil onto the new cartridge gasket. To install the new cartridge, screw it in by hand. Over tightening may cause deformation of rubber gasket. After the new cartridge has been replaced, the transmission fluid level will normally decrease slightly. Make sure that the transmission fluid does not leak through the seal. Check the fluid level. IMPORTANT To prevent serious damage to the hydraulic system. Use only a genuine KUBOTA filter or its equivalents.
(1) Hydraulic Oil Filter Cartridge (for HST)
(2) Hydraulic Oil Filter Cartridge W1014458
G-14
KiSC issued 03, 2007 A