SPECIFICATIONS
B1710 · B2110 · B2410 · B2710, WSM
Model PTO power Maker Model Type Number of cylinder Bore and stroke Total displacement Engine power (ECE-R24) Engine power Engine (SAE gross) Rated revolution Maximum torque Battery Starting system Lubricating system Cooling system Fuel Fuel tank Engine crankcase (with filter) Capacities Engine coolant Transmission case Front axle case Front Tires Rear Overall length (with 3P) Overall width (min. tread) Overall height (with ROPS) Overall height Dimensions (top of steering wheel) Wheel base Minimum ground clearance Front Tread Rear Weight (with ROPS) 4WD with brake Minimum turning Bi-speed turn radius without brake Clutch Steering Transmission Travelling system Brake Differential Hydraulic control system Pump capacity Hydraulic system
PTO system
Three point hitch At lift points Max. lift 24 in. behind lift force points PTO shaft Rear Revolution PTO shaft Mid. Revolution
B2710HDB 15.0 kW (20.4 HP)* KUBOTA V1305-D18 Indirect Injection. Vertical, water-cooled, 4-cycle diesel 4 76 × 73.6 mm (2.99 × 2.90 in.). 1335 cm3 (81.5 cu.in.) 18.2 kW (24.7 PS) 20.1 kW (27.0 HP) 43.3 r/s (2600 rpm) 79 N·m (59 ft-lbs) 12 V, RC : 79 min, CCA : 433 A Electric starting with cell starter 12 V, 1.4 kW Forced lubrication by trochoidal pump Pressurized radiator, forced circulation with water pump Diesel fuel No. 2-D [above −10 °C (14 °F)], Diesel fuel No. 1 [below −10 °C (14 °F] 26 L (6.9 U.S.gals., 5.7 Imp.gals.) 4.1 L (4.3 U.S.qts., 3.6 Imp.qts.) 4.5 L (4.8 U.S.qts., 4.0 Imp.qts.) 15.5 L (4.10 U.S.gals., 3.41 Imp.gals.) 5.3 L (5.6 U.S.qts., 4.7 Imp.qts.) 7-12 (180 / 85D12) 12.4 -16 2625 mm (103.3 in.) 1365 mm (53.7 in.) 2334 mm (91.9 in.) 1375 mm (54.1 in.) 1666 mm (65.6 in.) 308 mm (12.1 in.) 935 mm (36.8 in.) 1050 mm (41.3 in.) 842 kg (1857 lbs) 2.1 m (6.9 feet) 2.1 m (6.9 feet) Dry single plate Integral type power steering Hydrostatic transmission with 3 speeds range gear shift Wet disk type Bevel gears Position control 3P : 24.4 L/min. (6.4 U.S.gals./min., 5.4 Imp.gals./min.) Power steering : 11.7 L/min. (3.1 U.S.gals./min., 2.6 Imp.gals./min.) SAE Category I 830 kg (1830 lbs) 650 kg (1433 lbs) SAE 1-3/8, 6 splines 1 speed (540 rpm at 2600 engine rpm) USA No. 5 (KUBOTA 10-tooth) involute spline 1 speed (2500 rpm at 2578 engine rpm)
Note : * Manufacture’s estimate The company reserves the right to change the specifications without notice. W10368160
9
KiSC issued 11, 2006 A