HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
11.
12.
13.
Install input shaft into housing.
70-421-456
10
70-421-462
11
70-421-461_460
12
70-421-476
13
Install swash plate control spring (1) and swash plate bearings (2).
Reassemble the swash plate (1), into the housing by tilting the swash plate with the push rod socket up slightly and installing.
NOTE: Caution must be used when installing the complete swash plate so as not to dislodge the swash plate spring or the saddle bearings.
14.
Insert the push rod (1), through the stroke piston bore and reengage the end of the tube into the swash plate socket.
MAXXUM-T3-DRAFT 02/11/2011
A.10.A / 91