COOLING SYSTEM
INSP ADJ
4. Remove: • Coolant filler cap 1
1
WARNING Do not remove the coolant filler cap 1 when the engine is hot. Pressurized scalding hot fluid and steam may be blown out, which could cause serious injury. When the engine has cooled, place a thick rag or a towel over the coolant filler cap. Slowly turn the cap counterclockwise until it stop. This allows any residual pressure to escape. When the hissing sound has stopped, press down on the cap while turning it counterclockwise to remove it.
SCH2120
5. Place an open container under the coolant drain bolt 1. 6. Remove: • Coolant drain bolt • Gasket (coolant drain bolt) 7. Drain the coolant.
NOTE: Lift up the tail of the machine to drain the coolant. SCH2130
8. Remove: • Right side cover 1 (MM700)
1 SCH2140
2-7
http://ReadManuals.com