2008 Ford Ranger 2008 STEERING Power Steering - Ranger
3. Move the steering gear as far to the RH side of the vehicle as possible.
Fig. 30: Moving Steering Gear As Far To RH Side Of Vehicle As Possible Courtesy of FORD MOTOR CO. 4. Move the LH inner tie rod into the opening in the crossmember and move the steering gear into position.
Fig. 31: Locating LH Inner Tie Rod Courtesy of FORD MOTOR CO. 5. To place the steering gear in the straight-ahead position, turn the steering gear input shaft to the left by 1/2 the number of turns previously recorded. 6. Rotate the steering gear control valve housing toward the rear of the vehicle.
Fig. 32: Rotating Steering Gear Control Valve Housing Toward Rear Of Vehicle Courtesy of FORD MOTOR CO. 7. Install the 2 steering gear studs. Microsoft Wednesday, November 11, 2009 11:21:16 AM
Page 32
Š 2005 Mitchell Repair Information Company, LLC.