2008 Ford Ranger 2008 STEERING Power Steering - Ranger
Fig. 17: Identifying Special Tool On Tie-Rod End Courtesy of FORD MOTOR CO. NOTE:
Count and record the number of times the outer tie-rod end turns for assembly reference.
5. Remove the outer tie-rod end. 6. Remove the tie-rod jam nut. NOTE:
If repairing the RH side, it will be necessary to pull back the LH inner bellows boot to hold the steering gear.
7. Remove the inner and outer bellows boot clamps. 8. Remove the bellows boot. CAUTION: Place the steering gear at the center position. Use a 21 mm (0.82 in) crowfoot on the flat of the rack gear to resist rotation and to prevent damage during removal and installation of the inner tie rod. NOTE:
The help of an assistant may be needed for removal of the RH inner tie rod.
9. Using the special tool, remove the inner tie rod. ď Ź To install, tighten to 100 Nm (74 lb-ft).
Microsoft Wednesday, November 11, 2009 11:21:16 AM
Page 20
Š 2005 Mitchell Repair Information Company, LLC.