Fig. 2-221
Fig. 2-224
A746
A750
9. Place the centrifugal onto the PTO-end of crankshaft making sure the notch of the centrifugal aligns with keyway of the crankshaft.
12. Install the bearing in the gear case housing. Apply grease to the inner lips of the seal; then place the seal into position.
Fig. 2-222
Fig. 2-225
A747
10. Secure the PTO-end crankshaft components by applying blue Loctite #242 to the nut, installing the PTO-end nut, and tightening the nut to 3-4 kg-m (22-29 ft-lb).
A751
13. Install the primary driven shaft. Fig. 2-226
Fig. 2-223
A752
A749
11. Install the shifter so the centrifugal weights are positioned against the shifter arms.
2-54
14. Apply High-Temp Sealant (p/n 0636-069) to both sides of the gear case gasket. Place the gasket against the crankcase.