2000 Ford Pickup F350 Super Duty 2000-01 ENGINES 4.6L V8 - VIN W & 6
Fig. 18: Seal Retainer Bolt Tightening Sequence Courtesy of FORD MOTOR CO. WATER PUMP Removal & Installation
1. Drain cooling system. Remove cooling fan and shroud. Release belt tensioner, and remove accessory drive belt. Remove water pump pulley. Remove retaining bolts, water pump and "O" ring. 2. To install, reverse removal procedure. Lubricate "O" ring with coolant before installing. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Fill cooling system. OIL PAN WARNING: Ensure air suspension system is shut off prior to hoisting, jacking or towing an air suspension vehicle. Air suspension switch is located behind right kick panel. Failure to do so can result in inflation or deflation of air springs, which may cause vehicle to shift during servicing. Removal (E150)
1. Disconnect negative battery cable(s). Remove engine cover. Remove air cleaner and outlet tube assembly. Remove cooling fan and fan shroud. Remove oil indicator tube. Remove throttle body. Raise and support vehicle. 2. Drain engine oil. Drain cooling system. Remove radiator hose. Remove motor mount-to-subframe nuts. Remove flywheel inspection plate. Raise engine and position blocks between motor mounts and Helpmelearn Repair Manuals Wednesday, November 08, 2006 7:35:53 PM
Page 27
Š 2004 Mitchell Repair Information Company, LLC.