SPEC
MAINTENANCE SPECIFICATIONS (FT9.9D)
E
MAINTENANCE SPECIFICATIONS (FT9.9D) POWER UNIT Item
Unit
FT9.9DMH
CYLINDER HEAD Warpage limit
mm (in)
CYLINDER Bore Wear limit Taper limit Out-of-round limit Cylinder block inside diameter
mm (in) mm (in) mm (in) mm (in) mm (in)
CAMSHAFT Intake (A) Exhaust (A) Intake (B) Exhaust (B) Camshaft journal diameter
Model FT9.9DEH
FT9.9DE
0.1 (0.004) 59.00 ~ 59.02 (2.323 ~ 2.324) 59.10 (2.327) 0.08 (0.003) 0.05 (0.002) A : Blue 38.033 ~ 38.040 (1.4974 ~ 1.4976) B : Black 38.025 ~ 38.032 (1.4970 ~ 1.4973) C : Brown 38.016 ~ 38.024 (1.4967 ~ 1.4970)
mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in)
23.895 ~ 23.995 (0.9407 ~ 0.9447) 23.917 ~ 24.017 (0.9416 ~ 0.9456) 19.950 ~ 20.050 (0.7854 ~ 0.7894) 19.950 ~ 20.050 (0.7854 ~ 0.7894) 15.973 ~ 15.984 (0.6289 ~ 0.6293) 17.975 ~ 17.991 (0.7077 ~ 0.7088) 16.000 ~ 16.0188 (0.6299 ~ 0.63066) 18.000 ~ 18.018 (0.7087 ~ 0.7094) 0.03 (0.001)
TIMING BELT Slack
mm (in)
0 ~ 10 (0 ~ 0.4)
ROCKER ARM SHAFT Outside diameter
mm (in)
12.941 ~ 12.951 (0.5095 ~ 0.5099)
ROCKER ARM Inside diameter
mm (in)
13.000 ~ 13.018 (0.5118 ~ 0.5125)
Degree
90.5 ~ 91.5
mm (in) mm (in)
0.20 ± 0.05 (0.008 ~ 0.002) 0.25 ± 0.05 (0.010 ~ 0.002)
mm (in) mm (in) mm (in) mm (in)
27.9 ~ 28.1 (1.10 ~ 1.11) 21.9 ~ 22.1 (0.86 ~ 0.87) 2.0 ~ 3.1 (0.079 ~ 0.122) 2.0 ~ 3.1 (0.079 ~ 0.122)
Oil pump housing journal diameter Cylinder head journal diameter Camshaft round limit
VALVES Face angle Valve clearance (cold) Intake Exhaust
Head diameter (A) Face width (B)
Intake Exhaust Intake Exhaust
2-25