Service Manual
Fuels, lubricants and other consumables Specifications for fuels, lubricants and consumables
For viscosity grades SAE 80 and SAE 90 according to MIL-L-2105 D, you may use an oil of viscosity grade SAE 80W90.
2.4.1
Grease and other process chemicals Process chemicals
Description / manufacturer
Grease for slewing ring / general lube points
The grease must conform to specification KP2k, consistency grade 2, NLGI grade according to DIN 51818 and DIN 51825 or EP 2 according to NF-T-60 132. The grease must consist of a lithium complex with a VKA value of minimum 2300 N according to DIN 51350 or ASTM D 2596 respectively.
Contact spray for slip rings
Cramolin ID no. 7024145
Lubricant for pistons, piston nuts, also used for the mounting of piston rod bearings and cushioning sleeves to hydraulic cylinders
Gleitmo 800 ID no. 8300004 (40g tube)
Anti-friction varnish and lubricant for LIKUFIX coupling system
Gleitmo 900 ID no. 8610227 (400 ml spray can)
Special corrosion inhibitor for mounting recesses for sealing elements at hydraulic cylinders
Castrol-Tarp ID no. 8300005 (40g tube)
Other grease: Lubricant used for the mounting of pumps to prevent fretting corrosion on spline meshes
LIEBHERR CTK special lubricant ID no. 861331301 (400g cartridge)
Coolant for air-conditioning system
R 134 A Drain and fill the system according to the instructions in this manual (air-conditioning assembly).
Refrigeration oil for a/c compressor
The SD5H14 / SD7H15 a/c compressors are factory-filled with Planetelf PAG SP 20. ID no. 8504414 (0.25 litre can) ID no. 7620633 (1.0 litre can) The compressor supplier does not permit the use of any other refrigeration oil.
Tab. 8
2.5
Grease and other process chemicals
Coolant In order to improve the quality of the cooling water, LIEBHERR diesel engines are equipped with water filter installations for Deutz engines. This ensures that the coolant is also filtered in the bypass flow where dirt and rust particles that might lead to leakage in the cooling pump are removed.
MJFCIFSS
1.50. 9