G GENERAL
B1710 · B2110 · B2410 · B2710, WSM
Changing Transmission Fluid
• • 1. 2. 3. 4. 5. 6. ■ •
•
•
CAUTION Be sure to stop the engine when checking and changing the transmission fluid. Allow engine to cool down sufficiently, oil can be hot and can burn. Place an oil pan under the tractor. Remove the drain plugs (1) at the bottom of the transmission cases. Drain the transmission fluid. After draining, screw in the drain plugs. Fill new oil from filling port after removing the filling plug (2) up to the upper notch on the dipstick (3). After running the engine for a few minutes, stop it and check the oil level again, if low, add oil prescribed level. IMPORTANT Use only multi-grade transmission oil. Use of other oils may damage the transmission or hydraulic system. Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page G-8.) Never work the tractor immediately after changing the transmission oil. Keeping the engine at medium speed for a few minutes to prevents damage to the transmission. Do not mix different blands oil together.
Transmission fluid capacity
(1) Drain Plug (2) Filling Port (3) Dipstick
B1710D B2110D B2110DB B2410D B2410DB
11.5 L 3.04 U.S.gals. 2.53 Imp.gals.
B2110HDB B2410HDB
12.5 L 3.30 U.S.gals. 2.75 Imp.gals.
B2710HDB
15.5 L 4.10 U.S.gals. 3.41 Imp.gals. A : Oil level is acceptable within this range. a : B1710, B2110, B2410 b : B2710 W10150550
G-13
KiSC issued 11, 2006 A