Section 3 5-7
Routine Maintenance
Section 3 5-7
Hydraulics (continued)
Cleaning/Changing the Suction Strainer 1
Prepare the Machine Position the machine on level ground. Stop the engine. Remove the starter key.
2
Locate the Suction Strainer
3
Release Tank Pressure See Releasing Tank Pressure.
4
Remove the suction Strainer a Remove the retaining bolts A and washers D, lift off cover plate B.
B
D
A
b Remove the suction strainer C and clean with a suitable solvent or renew. 5
Fit the Suction Strainer Fitting is a reversal of removal.
6
Check the Hydraulic fluid Level See Checking the Fluid Level.
7
Seal the System Refit the cover plate B together with its 'O'-ring.
Note: Check the 'O'-ring, if it is worn or damaged replace it with a new one and secure with bolts A and washers D.
C
JS11050
9803/6420
Issue 2*