Instrument Panel
0100 YRM 1390 3. Remove the parking brake switch cover and parking brake switch. Refer to the section Parking Brake SwitchRemove. 4. Disconnect the electrical connector to the instrument panel inside the instrument panel box. 5. Remove the five screws that retain the instrument panel top console to the cab, and remove the instrument panel top console.
Install 1. INDICATOR DISPLAY CLIP Figure 30. Indicator Display Removal 4. Install the new indicator display by pushing the indicator display from the outside to the inside until the two clips are latched. 5. Connect the electrical connector to the indicator display at the inside of the instrument panel box. 6. Position the fuse panel cover to the right side of the instrument panel and install the four retaining screws. See Figure 28.
1. Position the instrument panel top console to the cab and install the five retaining screws. 2. Connect the electrical connector to the instrument panel inside the instrument panel box. 3. Install the parking brake switch and cover. Refer to the section Parking Brake SwitchInstall. 4. Install the heater switch cover and switches. Refer to the section Electric-Operated Heat Control and Air Recirculation Control (Airco Only)Install and the section Air Conditioning Switch Replacement.
INSTRUMENT PANEL TOP CONSOLE
5. Install the key switch and cover. Refer to the section Key SwitchInstall.
Remove
6. Make sure the switches function correctly.
1. Remove the key switch cover and key switch. Refer to the section Key SwitchRemove. 2. Remove the heater switch cover and switches. See Figure 29. Refer to the section Electric-Operated Heat Control and Air Recirculation Control (Airco Only)Remove and the section Air Conditioning Switch Replacement.
56