2100 YRM 1328
Tilt Cylinder Repair Legend for Figure 3
A. OUTER VIEW
B. INNER VIEW
1. 2. 3. 4. 5.
6. 7. 8. 9. 10.
TILT PIN CAPSCREW WASHER ANCHOR PIN CYLINDER HOSE PORT
NOTE: Perform Step 5 for lift truck model GLP/ GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/ GDP170VX, GLP/GDP175VX36, GLP/GDP190VX) (A909, B909). 5. Remove and discard the rod wiper, O-rings, rod seal, and backup ring from the gland. See Figure 5.
FRAME END MOUNT MAST END MOUNT ROD END LUBE FITTING HEX NUT
8. Remove and discard the wear ring and piston seal from the piston. See Figure 4 for lift truck models •
GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878)
•
GLC/GDC60VX, GLC/GDC70VX (GC/GLC/ GDC135VX, GC/GLC/GDC155VX) (C879, D879, E879, F879)
NOTE: Perform Step 6 only if the piston or rod has been damaged. 6. Place the rod in a soft-jaw vise and remove lock nut and piston from the rod.
See Figure 5 for lift truck model •
GLP/GDP80VX, GLP/GDP80VX9, GLP/ GDP90VX (GLP/GDP170VX, GLP/ GDP175VX36, GLP/GDP190VX) (A909, B909)
See Figure 4 for lift truck models •
•
GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878) GLC/GDC60VX, GLC/GDC70VX (GC/GLC/ GDC135VX, GC/GLC/GDC155VX) (C879, D879, E879, F879)
See Figure 5 for lift truck model •
GLP/GDP80VX, GLP/GDP80VX9, GLP/ GDP90VX (GLP/GDP170VX, GLP/ GDP175VX36, GLP/GDP190VX) (A909, B909)
7. Remove O-ring, and if equipped tilt spacer from rod. Discard O-ring.
CLEAN WARNING Cleaning solvents can be flammable and toxic and can cause skin irritation. When using cleaning solvents, always follow the solvent manufacturer's recommended safety procedures. Compressed air can move particles so they cause injury to the user or to other personnel. Make sure the path of the compressed air is away from all personnel. Wear protective goggles or a face shield to prevent injury to the eyes.
See Figure 4 for lift truck models •
•
GLP/GDP60VX, GLP/GDP70VX (GP/GLP/ GDP135VX, GP/GLP/GDP155VX) (C878, D878, E878) GLC/GDC60VX, GLC/GDC70VX (GC/GLC/ GDC135VX, GC/GLC/GDC155VX) (C879, D879, E879, F879)
CAUTION DO NOT allow cleaning solvent to come in contact with rubber components, as it will damage those components. Clean all metal parts in solvent and dry with compressed air.
See Figure 5 for lift truck model •
GLP/GDP80VX, GLP/GDP80VX9, GLP/ GDP90VX (GLP/GDP170VX, GLP/ GDP175VX36, GLP/GDP190VX) (A909, B909)
7