AC Motor Repair
620 YRM 1098 15. Remove screws and retaining nuts from the drive end bell.
CAUTION To prevent damage to the encoder wire, make sure the encoder wire is out of the way when lifting stator. 16. Attach approved lifting device to the stator, and slowly lift stator straight up from the rotor and drive end bell. See Figure 10.
1. ENCODER BEARING 2. BEARING PULLER 3. ENCODER WIRE Figure 8. Bearing Removal
1. 2. 3. 4. 1. 3/4-INCH HEX SOCKET PLUG 2. END BELL Figure 9. End Bell ERC/P16-20AAF (ERC030-040AH) (B814C814)
4
ROTOR STATOR APPROVED LIFTING DEVICE DRIVE END BELL Figure 10. Lifting of Stator ERC20-32AGF (ERC040-065GH) (A908) Model Shown