BRAKE SWITCH-STOP LAMP SWITCH ADJUSTMENT 1.
2
Adjust protrusion (A) of the brake switch (LS,) stop lamp switch (LS,). A = 26 m m (1.02 in)
and
,, check ON and OFF. After installing LS, and L,S (1) Operate the brake pedal and check conduction at each switch connector. Standards Switch
LSS LSST
Not operated
on a0 n
Operated
n on
00
(2) Adjust each switch ONIOFF timing when the brake pedal is operated. Make adjustment by turning the adjusting bolt so that each switch is operated when the brake pedal is depressed by dimension B in the figure from the free state.
Switch
10 mm (0.39 in.)
on-an an- on