Window Wipers Replacement
Install, Lift Truck Models ERP22-35VL (ERP045-070VL) (A976), ERP40-50VM, ERP50-55VM6 (ERP080-120VM, ERP100VML) (A985), ERP15-20VT (ERP030-040VT) (G807), and ERP16-20VF (ERP30-40VF) (A955) NOTE: Perform Step 1 through Step 4 for lift truck model ERP22-35VL (ERP045-070VL) (A976). 1. Connect hose (8) to connector. See Figure 9. 2. Connect check valve into hose (8). Connect hose (8) to other end of check valve. See Figure 9. 3. Install reservoir, washers, and four capscrews on bracket. See Figure 9.
0100 YRM 1446
•
ERP15-20VT (ERP030-040VT) (G807)
•
ERP16-20VF (ERP30-40VF) (A955)
5. Connect hose (13) to connector (11). See Figure 10. 6. Connect check valve to hose (13). Connect hose (14) to other end of check valve. See Figure 10.
ERP15-20VT (ERP030-040VT) (G807)
•
ERP16-20VF (ERP30-40VF) (A955)
See Figure 11 for lift truck models •
ERP40-50VM, ERP50-55VM6 (ERP080-120VM, ERP100VML) (A985)
13. Using two washers, two nuts, and two caps, install wiper motor to lift truck. See Figure 12. 14. Install wiper blade on wiper arm. See Figure 9 for lift truck models •
ERP22-35VL (ERP045-070VL) (A976)
See Figure 10 for lift truck models
4. Using two washers and two capscrews, install reservoir on cowl. NOTE: Perform Step 5 through Step 7 for lift truck models
•
•
ERP15-20VT (ERP030-040VT) (G807)
•
ERP16-20VF (ERP30-40VF) (A955)
See Figure 11 for lift truck models •
ERP40-50VM, ERP50-55VM6 (ERP080-120VM, ERP100VML) (A985)
15. Using two flange nuts, install wiper arm and wiper blade on wiper motor. See Figure 9 for lift truck models •
ERP22-35VL (ERP045-070VL) (A976)
7. Install bracket, pump, six washers, three capscrews, three nuts, and three caps on overhead guard leg. See Figure 10.
See Figure 10 for lift truck models
NOTE: Perform Step 8 through Step 11 for lift truck models ERP40-50VM (ERP080-100VM) (A985).
See Figure 11 for lift truck models
8. Connect hose (19) to connector (7). See Figure 11.
•
ERP15-20VT (ERP030-040VT) (G807)
•
ERP16-20VF (ERP30-40VF) (A955)
•
ERP40-50VM, ERP50-55VM6 (ERP080-120VM, ERP100VML) (A985)
9. Connect check valve to hose.
NOTE: Perform Step 16 and Step 17 for lift truck models ERP22-35VL (ERP045-070VL) (A976).
10. Install reservoir to bracket using, four nuts, washers, capscrews, and caps. See Figure 11.
16. Install nozzle (4), hose (6), and two clamps (5) on wiper arm. See Figure 9.
11. Using two nuts, washers, and capscrews, install reservoir to cowl.
17. Connect hose (6) to connector (7). See Figure 9.
12. Connect hose to reservoir. See Figure 9 for lift truck models •
ERP22-35VL (ERP045-070VL) (A976)
See Figure 10 for lift truck models
18
NOTE: Perform Step 18 for lift truck models •
ERP15-20VT (ERP030-040VT) (G807)
•
ERP16-20VF (ERP30-40VF) (A955)
18. Connect hose (15) to connector (11). See Figure 10.