D180
0 - 19 TECHNICAL DATA D180 Wear components: Two corner bits + three reversible cutting edges
BULLDOZER EQUIPMENT
Thickness of cutting edges
mm (in)
20 (0.8)
Break-up force (lift cylinders)
-
Break-up force (tilt cylinder)
-
C-frame hinged to the track frame by ball joints. Hydraulic tilt adjustment and mechanical pitch adjustment. Side guides. C-frame height Diameter of front ball joint
200 (7.9) mm (in)
150 (5.9)
Width (blade)
mm (in)
-
Width (tip of corner bits)
mm (in)
4000 (157.5)
Height
mm (in)
1030 (40.5)
m3 (ft3)
3.18 (112.3)
Max. raising
mm (in)
1148 (45.2)
Penetration into the ground
mm (in)
452 (17.8)
Max. tilt
mm (in)
380 (14.9)
Angledozer blade
ANGLEDOZER EQUIPMENT
Nominal capacity
Max. pitch
deg
¹ 5° 30'
mm (in)
20 (0.8)
Wear components: Two corner bits + three reversible cutting edges Thickness of cutting edges Break-up force (lift cylinders)
-
Break-up force (tilt cylinder)
-
Parallelogram PD180 ripper Two double-stroke cylinders
MULTISHANKS RIPPER LT/XLT
Bore and stroke of cylinder rods
mm (in)
100 x 56 (3.9x2.2)
Bore
mm (in)
480 (18.9)
Length closed
mm (in)
845 (33.2)
Length extended
mm (in)
1325 (52.2)
Cylinder supports and equipment beams in welded boxed structure H. D. semi-curved shanks with replaceable tips No. of shanks
3
Dimensions (according to ISO 6746/2)
-
Ripping depth
mm (in)
540 (21.3)
Ripping width
mm (in)
1900 (74.8)
Ground clearance under shank with ripper raised
mm (in)
503 (19.8)
Ground clearance under shank with ripper lowered
mm (in)
390 (15.3)
Total width
mm (in)
2130 (83.9)
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual