8200 SERIES TRACTORS 2G01.2
Splitting - Rear wheels / Hubs Parts list (Figs 2 to 5)
General The 8200 tractors are fitted with quite different stub axles whose specifications vary depending on the type of trumpet (Figs. 1 to 8) and the transmissible torque: - Flange shaft (3): Ø 82 mm (Fig. 1), - Long straight shaft (3) (smooth), short or long: Ø 95 or 110 mm (Fig. 2 to 8).
Allocations Tractors 8210 and 8220: - Flange shafts: Ø 82 mm or - Long straight shafts: Ø 95 mm Tractors 8240 and 8250: - Long straight shafts: Ø 95 mm or 110 mm Tractors 8260 to 8280: - Long straight shafts: Ø 110 mm Changing tread is obtained: - either by driving then locking the taper-fitting (long straight shaft), - or by turning over the rim and/or the disk (flange shaft). The material used for making the rim disk may be steel or cast iron. The contour of the disk is also different depending on the buyer’s option.
Issue 1
May 2001
(3) (6) (7) (8) (9) (10) (11) (12) (13)
Stubshaft Circlip Plastic plug Single cone Washer Spline Spline Adaptor Washer